Add the `--capture-comment "comment"` option for appending pcapng
comments to the SHB of the output file(s).
Add the `--discard-capture-comment` option for removing pcapng comments
present in the input file SHB(s) before writing to the output file(s).
Supports multiple comments per SHB. Noted in the documentation that
Wireshark itself doesn't support multiple comments.
Bug: 15033
Change-Id: If07a4e7a93505438639018783a11343cd5992f2a
Reviewed-on: https://code.wireshark.org/review/38074
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Allow user to specify time resolutions as fine as 1 nanosecond for the
start and stop times (-A and -B options) for editcap. Uses `nstime_t`
for the user options and `nstime_cmp()` to compare with packet
timestamps.
Change-Id: I2340bc4830c7d9a6b17a5e53fa4e8837e231bcb6
Reviewed-on: https://code.wireshark.org/review/38057
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
1) The default build configuration is to select PCAPNG as
output format, but it can be selected as PCAP. Some of the
command line tools have the option to select the output
format and default towards the build configuration.
This has to be reflected in their help output also.
2) Various documentation files are still stating that PCAP is
the default format of various tools. With the default build
configuration being PCAPNG these have to be adjusted as well.
(with lack of dynamic content the documentation can only refer
to the default build configuration format).
Change-Id: I51d19642a7ed8c99817971c1f25d20972095021e
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/30951
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a new option to insert decryption secrets into a pcapng file.
Change-Id: I0e024585cac9a8a328e88d32f9eb03d37d350e2a
Ping-Bug: 15252
Reviewed-on: https://code.wireshark.org/review/30693
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Implement a --seed option to be used in conjunction with -E. The option
allows the user to set the seed for the pseudo-random number generator,
which can be useful for recreating a particular sequence of errors.
Change-Id: Id427ab5fd7711652ad56c72271b2e0acb7380858
Reviewed-on: https://code.wireshark.org/review/29306
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We've set "=encoding utf8" in wireshark.pod for a long time. Do so in
the rest of our .pod files.
Change-Id: I3ef0fb3a88ed63275b4ff4362b6afbf13d79a0bc
Reviewed-on: https://code.wireshark.org/review/29182
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
This is useful when processing packets that were captured by multiple radios on the same channel.
Change-Id: I9dacc35294a4ed4e817014e563e7c9a54ee05e40
Reviewed-on: https://code.wireshark.org/review/28843
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
With option -I one can ignore the first number of bytes from the frame
while doing duplicate frame removal. This doesn't handle shorter frames
correctly. Add safeguards for this, and update the help text.
Bug: 13378
Change-Id: Ia6b65d0797f4069f0b89fa134114d88d80988211
Reviewed-on: https://code.wireshark.org/review/20004
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This option skips some bytes when fuzzing, that prevents some headers from being changed. This focuses fuzzer to a smaller part of the packet.
Change-Id: I1db83235e93f2774a9991e3af70f633487b816fa
Reviewed-on: https://code.wireshark.org/review/9982
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Description:
Ignore the specified bytes number at the beginning of the frame during MD5 hash calculation.
Useful to remove duplicated packets taken on several routers or SW(differents mac addresses for example).
e.g. -I 26 in case of Ether/IP/ will ignore ether(14) and IP header(20 - 4(src ip) - 4(dst ip)).
The default value is 0.
This option is only relevant when used with -d|-D|-w
Bug: 8511
Change-Id: I009a09d32778a182b2d88f372651f658a4938882
Reviewed-on: https://code.wireshark.org/review/4104
Tested-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
In some cases "-v" was already used so "-V" is the option.
Note that the version information in these utilities is much shorter than what
is presented by the big programs.
As requested by https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5804
Bug: 5804
Change-Id: I35db35a4eace2797afd895f9be7322ef39928480
Reviewed-on: https://code.wireshark.org/review/2489
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Lastly, try to improve the documentation a bit concerning chopping and provide another example depicting 2 separate chopping regions. *Maybe* this is clearer?
One more example here for posterity: Given the following 75 byte packet, there
are 8 different ways to chop the 2 regions marked as 10 and 20 in a single pass:
<--------------------------- 75 ---------------------------->
+---+-------+-----------+---------------+-------------------+
| 5 | 10 | 15 | 20 | 25 |
+---+-------+-----------+---------------+-------------------+
1) editcap -C 5:10 -C -25:-20 in.pcap out.pcap
2) editcap -C 5:10 -C 50:-20 in.pcap out.pcap
3) editcap -C -70:10 -C -25:-20 in.pcap out.pcap
4) editcap -C -70:10 -C 50:-20 in.pcap out.pcap
5) editcap -C 30:20 -C -60:-10 in.pcap out.pcap
6) editcap -C 30:20 -C 15:-10 in.pcap out.pcap
7) editcap -C -45:20 -C -60:-10 in.pcap out.pcap
8) editcap -C -45:20 -C 15:-10 in.pcap out.pcap
svn path=/trunk/; revision=51886
Given the following example, it's now possible to chop the 10 bytes depicted from the 100 byte packet 4 different ways and achieve the exact same results:
<-------- 100 --------> Methods:
1) editcap -C 20:10 in.pcap out.pcap
+------+----+---------+ 2) editcap -C -80:10 in.pcap out.pcap
| 20 | 10 | 70 | 3) editcap -C -70:-10 in.pcap out.pcap
+------+----+---------+ 4) editcap -C 30:-10 in.pcap out.pcap
svn path=/trunk/; revision=51854
argument to the -F flag for pcap format is "libpcap", not "pcap", we
have a problem. Make it "pcap", and add a backwards-compatibility hack
to support using "libpcap" as well.
Update the man pages to refer to it as pcap as well, and fix the
capitalization of "WinPcap" (see http://www.winpcap.org) while we're at
it.
Also, refer to http://www.tcpdump.org/linktypes.html for the list of
link-layer header types for pcap and pcap-ng.
svn path=/trunk/; revision=50989
those options (which had been cut-n-paste from the tshark man page).
For editcap to support these options it would either need to be linked
against libwireshark or the address resolution stuff would need to be moved
from libwireshark to, for example, libwsutil.
svn path=/trunk/; revision=45975
support; TShark has read+write support. Additionally TShark can read a
"hosts" file and write those records to a capture file.
This uses "struct addrinfo" in many places and probably won't compile on
some platforms.
svn path=/trunk/; revision=36318
This patch adds a new '-S' option to editcap that will rewrite timestamps of
packets to insure that the new capture file is in strict chronological order.
This option's primary use case is to fixup the occasional timestamps that have
a negative delta time relative to previous packet.
This feature is related to (but does not depend on) capinfos enhancement
submitted in bug #4315 which helps identify tracefiles with "out-of-order"
packets.
svn path=/trunk/; revision=33042
- New duplicate packet removal options for editcap
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3168
I changed the patch a bit:
- Adapted to 80 chars wide screen
- Merged -w and -W parameters
svn path=/trunk/; revision=28074
Don't use anything on man page references - pod2man handles that.
Don't refer to "the capture file format section" of the Wireshark man
page, as there's no section explicitly labelled as such; just refer to
the beginning of the DESCRIPTION section.
svn path=/trunk/; revision=18694
Gerald Combs