Martin Schramm
9d07b47e6e
gtm900-bo: rename main files w/o explicit version
2023-11-02 13:09:02 +01:00
Harald Welte
429f2488ae
eksos-rj45-breakout: Move OSHW logo to have no overlap
2023-10-19 10:52:39 +02:00
Harald Welte
974a87f6ea
eksos-rj45-breakout: Add various dimensions
2023-10-19 10:52:39 +02:00
Martin Schramm
3df1c2db75
gtm900-breakout: add next design v3
2023-10-10 23:25:35 +02:00
Harald Welte
95d3205311
Add eksos-fanmount.dxf
...
This is the fan mounting plate that forms the top part of the Nokia
EKSOS DIY enclosure of
https://osmocom.org/projects/retronetworking/wiki/Nokia_EKSOS_N20_DIY_carrying_case
2023-08-27 15:09:01 +02:00
Harald Welte
b43caeeb02
amr-breakout: Fix silkscreen label of IN3
...
Closes: OS#5369
2023-08-21 21:35:36 +02:00
Harald Welte
c32e5f8a3c
amr-breakout: Add pull-ups for !AC97_RESET and !PRIMARY_DN
...
Closes: OS#5369
2023-08-21 21:34:32 +02:00
Harald Welte
aedb685166
README.md: Add note about EKSOS breakout boards
2023-08-11 13:55:56 +02:00
Harald Welte
81fc18a0a0
eksos-rj45-breakout-for_slot: Move IDC connectors 11mm towards edge
...
It turns out that it's not very easy to bend the 64pos ribbon cable,
so let's make sure the IDC connectors align with the plane of the
ribbon cable from the PSTN/ISDN line cards.
2023-08-11 13:53:43 +02:00
Harald Welte
da38374d9f
eksos-rj45-breakout: Update DS1130 library (3 more SHLD, 1 more drill)
2023-08-11 13:53:43 +02:00
Harald Welte
48379a9f9f
eksos-rj45-breakout16: ad label/copyright/license/OSHW
2023-08-11 13:53:43 +02:00
Harald Welte
2e38688343
ISDN/POTS break-out board for NOKIA EKSOS N20 slot
2023-08-11 13:53:43 +02:00
Harald Welte
e12766070d
RJ45 breakout board for NOKA EKSOS ISDN / POTS ports
...
These board designs assumes that you use a 64pos (type 3 a+c)
DIN-connector with a flat ribbon cable to a 2x32 2.54mm pitch (IDE/SCSI
style) header to interconnect them.
The point is that assembling that ribbon cable with IDC technology is
much faster than performing soldering or LSA+ type termination on 32
individual wires.
2023-08-11 13:53:43 +02:00
Harald Welte
e7daf92415
pico-pcm-cardem: add various bom annotations
2023-07-18 21:21:44 +02:00
Harald Welte
8ba1138c48
pico-pcm-cardem: Initial design
...
this is just a convenience board to test/evaluate the idea of a rp2040
based SIM card emulator + PCM slave
2023-07-02 12:55:54 +02:00
Harald Welte
fbae9bd476
plutosdr-revb-extclk: Fix capacitor footprints
...
* Always use _0603 and not 0603 (oversized)
* 1uF can be 0603, only 10uF should be 0805
Related: OS#5892
2023-07-02 12:55:54 +02:00
Harald Welte
dbd53d6df5
plutosdr-revb-extclk: don't shut-down LTC via SD1/SD2
...
In the original PlutoSDR RevC or higher, there's a BSS138 FET
that [optionally] pulls low the SD1/SD2 pins in order to activate
the external clock input.
In this circuit, we don't have GPIO control but permanently enable
the LTC.
Related: OS#5892
2023-07-02 12:55:54 +02:00
Harald Welte
69dc3c912b
[cosmetic] plutosdr-revb-extclk: Route last missing airwire inside pad
...
Related: OS#5892
2023-07-02 12:55:54 +02:00
Martin Schramm
7ff040ae81
sfp-experimenter: insert main fiducials
2023-05-15 19:19:43 +02:00
Martin Schramm
5bda47b6b3
sfp-experimenter: update ext BOM attr to newer Digikey format
2023-05-15 19:00:07 +02:00
Martin Schramm
25580557e9
sfp-*: reintroduce changes for 10µ/1206 caps
2023-04-17 18:40:08 +02:00
Martin Schramm
67085c6d02
Merge remote-tracking branch 'refs/remotes/origin/master'
2023-04-14 21:09:10 +02:00
Martin Schramm
2dab54ca1c
sfp-*: change all 10µF/16V 0805 to 1206 (solves SYS#5397)
...
also update all URLs to the current Digikey URI scheme
2023-04-14 20:53:51 +02:00
Harald Welte
25624c5fa7
new X.21 "jumper box" design
...
DB-15 male + female connector with rows of pin headers to use jumper
wires to connect signals in any desired combination/permutation.
2023-03-04 13:58:54 +01:00
Harald Welte
0e6eb31ec7
New design: plutosdr-revb-extclk
...
This is a small circuit board containing the "external clock ref input"
circuitry that was added to PlutoSDR RevD. It can be used to
upgrade/rework RevB boards with the same clock input as the later RevD.
Related: OS#5892
2023-02-12 17:32:32 +01:00
Harald Welte
c5497debfc
bgt-gs305e: Target 3000 design files created (manually) from DXF
2023-02-03 12:28:35 +01:00
Harald Welte
8607ec5ffa
initial version of bgt-gs305e: BGT Mount for Netgear GS305E switch
2023-02-03 12:26:02 +01:00
Harald Welte
dcad3c6b6a
rj45_jumper_box: Add OSWH + sysmocom logo; final v2 as ordered
2023-01-20 16:38:05 +01:00
Harald Welte
561c824219
rj45_jumper_box: Connect shield of two connectors
2023-01-20 10:46:32 +01:00
Harald Welte
b625dbf06b
rj45_jumper_box: Use different RJ45 jack; both on top layer
...
The original design (one RJ45 on top, one on bottom) was easy to route
but was difficult to handle. Let's swap both connectors to top, and use
a low-cost Chinese RJ45.
2023-01-20 10:44:04 +01:00
Harald Welte
0137f0f2a7
sfp-experimenter: add datasheets of possible alternative LVDS tx/rx
2022-11-14 17:57:25 +01:00
Harald Welte
e4c04baf0d
sfp-experimenter: Add LVDS transmitter/receiver data sheets
2022-11-14 16:33:06 +01:00
Harald Welte
7b4ddba001
initial check-in of bgt-keystone project
...
This adds a 3U component carrier module into which you can mix and
match keystone modules as needed.
2022-10-22 14:36:52 +02:00
Martin Schramm
fa5b17a0bd
ngff-cardem: update schematics
...
This includes now the GND for OsmoSer conn.
2022-09-19 13:22:19 +02:00
Martin Schramm
f0f029afd5
ngff-cardem: connect OsmoSer's GND to GND (solves SYS#5514)
...
This change somehow didn't make it upstream though committed as
bf211d3; so recreated.
2022-09-19 13:16:04 +02:00
Harald Welte
4833d17d6b
RS422-protector (to be used in OCTOI hub)
2022-08-22 20:38:22 +02:00
Harald Welte
27934336de
update git URLs (git -> https; gitea)
2022-06-18 13:42:33 +02:00
Harald Welte
e039fe1590
xhfc-breaout: Conncet SPI_INV to GND
...
This was missing from the v1 design. SPI_INV must be tied to either high
or low to select the SPI clock polarity. It was tied to low by manawyrm
in his manual rework, so let's reflect this in the design accordingly.
2022-06-04 09:12:28 +02:00
Harald Welte
1c45406634
xhfc-breakout: Fix some part values; documentation
...
* R18 + R34 are 330k and not 3k9
* R5, R6, R21, R22 are 3R3 instead of 62R in universal TE/NT
* add various documentation text snippets
2022-05-19 22:12:32 +02:00
Harald Welte
5c891bf700
xhfc-breakout: check-in PDF renderings
2022-05-13 11:36:44 +02:00
Harald Welte
d175be3b69
xhfc-breakout: bom attributes
2022-05-13 11:34:47 +02:00
Harald Welte
a71a2df64e
xhfc-breakout: Complete routing of v1 board
2022-05-13 11:34:46 +02:00
Harald Welte
5e5699f447
xhfc-breakout: more WIP layout + schematics work
...
schematics should be done now, layout about 65%
2022-05-13 11:34:46 +02:00
Harald Welte
b790049faa
xhfc-breakout: partial PCB layout / component arrangement
2022-05-13 11:34:46 +02:00
Harald Welte
03b985b4c5
xhfc-breakout: Smash parts / align labels / better readability
2022-05-13 11:34:46 +02:00
Harald Welte
16430cf3fe
xhfc-breakout: Complete line interface from chip to RJ45
2022-05-13 11:34:46 +02:00
Harald Welte
8898e317c1
xhfc-breakout: Data sheets of transformer and BAV99 diode
2022-05-13 11:34:46 +02:00
Harald Welte
79edfc1b20
xhfc-breakout: WIP: Initial xhfc breakout board design
...
Related: OS#5417
2022-05-13 11:34:46 +02:00
Harald Welte
ce3668919c
ngff-cardem: Add PDF renderings of schematics + component placement
2022-03-24 15:26:45 +01:00
Martin Schramm
16b27a6057
GTM900-breakout: add next design v2
2022-02-21 20:14:51 +01:00