Drop static tables which map the bits in F2x80 to a chip select size in
favor of functions doing the mapping with some bit fiddling. Also, add
F15 support.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This function is relevant for F10h and higher, and it has only one
callsite so drop its function pointer from the low_ops struct.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
F15h sys_addr to chip select mapping is almost identical to F10h's so
reuse that. Rename functions on that path accordingly.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Replace per-DCT macros with smarter ones, drop hack and look for the
spare rank on all chip selects on a channel.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
When node interleaving is enabled, a subset of the addr[14:12] bits has
to be removed in order to get the normalized DCT address of the DRAM
channel. The actual number of bits to remove is determined by F1x[1,
0][7C:40][IntlvEn]. Do this correctly.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
On revC3 and revE Fam10h machines and later, non-interleaved graphics
framebuffer memory under the 16G mark can be swapped with a region
located at the bottom of memory so that the GPU can use the interleaved
region and thus two channels. Add support for that.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The address bits from MC4_STATUS differ only between K8 and the rest so
no need for a per-family method.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Use the struct mce directly instead of copying from it into a custom
struct err_regs.
No functionality change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The only difference is that F10h used to sport ganged DCTs and F15h
doesn't so adjust the F10h routine and reuse it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Remove reporting of errors with UC bit set - this is done by the MCE
decoding code anyway and this driver deals with DRAM ECC errors only. UC
(NB uncorrectable error) doesn't necessarily mean it is a DRAM error.
Remove unused macros while at it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The fact whether we are chipkill capable or not does not have any
bearing when computing the channel index on a ganged DCT configuration
so remove that. Also, simplify debug statements. Finally, remove old
error injection leftovers, while at it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Remove family names from macro names, drop single bit defines and
comment their meaning instead.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
* Restrict DCT ganged mode check since only Fam10h supports it
* Adjust DRAM type detection for BD since it only supports DDR3
* Remove second and thus unneeded DCLR read in k8_early_channel_count() - we do
that in read_mc_regs()
* Cleanup comments and remove family names from register macros
* Remove unused defines
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Do not read DBAM regs twice and simplify code around them.
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This function maps the system address to the normalized DCT address.
Document what the code does for more clarity and wrap insane bitmasks in
a more understandable macro which generates them. Also, reduce number of
arguments passed to the function. Finally, rename this function to what
it actually does.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cleanup and simplify f10_determine_channel(); make it more readable.
Also drop f10_map_intlv_en_to_shift() in favor of simply counting the
bits in F1x124[DramIntlvEn] which is equivalent.
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Add a struct representing the DRAM chip select base/limit register
pairs. Concentrate all CS handling in a single function. Also, add CS
looping macros for cleaner, more readable code. While at it, adjust code
to F15h. Finally, do smaller macro names cleanups (remove family names
from register macros) and debug messages clarification.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Add a struct representing the DRAM base/limit range pairs and remove all
cached subfields. Replace them with accessor functions, which actually
saves us some space:
text data bss dec hex filename
14712 1577 336 16625 40f1 drivers/edac/amd64_edac_mod.o.after
14831 1609 336 16776 4188 drivers/edac/amd64_edac_mod.o.before
Also, it simplifies the code a lot allowing to merge the K8 and F10h
routines.
No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
F15h "multiplexes" between the configuration space of the two DRAM
controllers by toggling D18F1x10C[DctCfgSel] while F10h has a different
set of registers for DCT0, and DCT1 in extended PCI config space.
Add DCT configuration space accessors per family thus wrapping all the
different access prerequisites. Clean up code while at it, shorten
names.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
amd64_debug_display_dimm_sizes() reports the distribution of the DIMMs
on each DRAM controller and its chip select sizes. Thus, the last don't
have anything to do with whether we're running in ganged DCT mode or not
- their sizes don't change all of a sudden. Fix that by removing the
ganged-check and dump DCT0's config for DCT1 when in ganged mode since
they're identical.
Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
K8 does not allow for an atomic RMW to a cacheline as F10h does so
disable the error injection interface for it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate
bandwidth it succeeded setting and remove superfluous arg pointer used
for that. A negative value returned still means that an error occurred
while setting the scrubrate. Document this for future reference.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Now that all prerequisites are in place, drop the two-stage driver
instances initialization in favor of the following simple init sequence:
1. Probe PCI device: we only test ECC capabilities here and if none exit
early.
2. If the hw supports ECC and it is/can be enabled, we init the per-node
instance.
Remove "amd64_" prefix from static functions touched, while at it.
There actually should be no visible functional change resulting from
this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Rework the code to check the hardware ECC capabilities at PCI probing
time. We do all further initialization only if we actually can/have ECC
enabled.
While at it:
0. Fix function naming.
1. Simplify/clarify debug output.
2. Remove amd64_ prefix from the static functions
3. Reorganize code.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
This is in preparation for the init path reorganization where we want
only to
1) test whether a particular node supports ECC
2) can it be enabled
and only then do the necessary allocation/initialization. For that,
we need to decouple the ECC settings of the node from the instance's
descriptor.
The should be no functional change introduced by this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
PCI ECS is being enabled by default since 2.6.26 on AMD so this code is
just superfluous now, remove it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Remove static allocation in favor of dynamically allocating space for as
many driver instances as northbridges present on the system.
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Add a macro per printk level, shorten up error messages. Add relevant
information to KERN_INFO level. No functional change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Rename variables representing PCI devices to their BKDG names for faster
search and shorter, clearer code.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Move the remaining per-family init code into the proper place and
simplify the rest of the initialization. Reorganize error handling in
amd64_init_one_instance().
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Run a per-family init function which does all the settings based on
the family this driver instance is running on. Move the scrubrate
calculation in it and simplify code.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, cacheinfo: Cleanup L3 cache index disable support
x86, amd-nb: Cleanup AMD northbridge caching code
x86, amd-nb: Complete the rename of AMD NB and related code
When matching error address to the range contained by one memory node,
we're in valid range when node interleaving
1. is disabled, or
2. enabled and when the address bits we interleave on match the
interleave selector on this node (see the "Node Interleaving" section in
the BKDG for an enlightening example).
Thus, when we early-exit, we need to reverse the compound logic
statement properly.
Cc: <stable@kernel.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Support more than just the "Misc Control" part of the northbridges.
Support more flags by turning "gart_supported" into a single bit flag
that is stored in a flags member. Clean up related code by using a set
of functions (amd_nb_num(), amd_nb_has_feature() and node_to_amd_nb())
instead of accessing the NB data structures directly. Reorder the
initialization code and put the GART flush words caching in a separate
function.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Not only the naming of the files was confusing, it was even more so for
the function and variable names.
Renamed the K8 NB and NUMA stuff that is also used on other AMD
platforms. This also renames the CONFIG_K8_NUMA option to
CONFIG_AMD_NUMA and the related file k8topology_64.c to
amdtopology_64.c. No functional changes intended.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
... instead of the MCi_STATUS info only for improved handling of certain
types of errors later.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The file names are somehow misleading as the code is not specific to
AMD K8 CPUs anymore. The files accomodate code for other AMD CPU
northbridges as well.
Same is true for the config option which is valid for AMD CPU
northbridges in general and not specific to K8.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100917160343.GD4958@loge.amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Borislav Petkov