https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130735 | mvanbaak | 2008-07-14 19:10:21 +0200 (Mon, 14 Jul 2008) | 10 lines
notify the user that dnsmgr refresh wont work when dnsmgr is not enabled.
Previously this command would automagically appear and disappear.
This was confusing.
(closes issue #12796)
Reported by: chappell
Patches:
dnsmgr_refresh_3.diff uploaded by chappell (license 8)
Tested by: russell, chappell, mvanbaak
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@130744 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: eliel
OK, now the context registrar slot is strdup'd. It is freed
on destruction. I don't see the need to do this with all
the structs' registrar fields, but if some wild case proves
they should also be handled this way, then we can
put in the extra work at that time.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@130297 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130173 | mmichelson | 2008-07-11 14:13:29 -0500 (Fri, 11 Jul 2008) | 7 lines
Fix a typo in audiohook_read_frame_both.
While this change has not been proven to fix any
specific issue, it is incorrect and could cause
unforeseen problems.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@130174 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: eliel
Tested by: murf
(closes issue #12960)
Reported by: mnicholson
In this 'omnibus' fix, I **think** I solved both
the problem in 13041, where unloading pbx_ael.so
caused crashes, or incomplete removal of previous
registrar'ed entries. And I added code to completely
remove all includes, switches, and ignorepats that
had a matching registrar entry, which should
appease 12960.
I also added a lot of seemingly useless brackets
around single statement if's, which helped debug
so much that I'm leaving them there.
I added a routine to check the correlation between
the extension tree lists and the hashtab
tables. It can be amazingly helpful when you have
lots of dialplan stuff, and need to narrow
down where a problem is occurring. It's ifdef'd
out by default.
I cleaned up the code around the new CIDmatch code.
It was leaving hanging extens with bad ptrs, getting confused
over which objects to remove, etc. I tightened
up the code and changed the call to remove_exten
in the merge_and_delete code.
I added more conditions to check for empty context
worthy of deletion. It's not empty if there are
any includes, switches, or ignorepats present.
If I've missed anything, please re-open this bug,
and be prepared to supply example dialplan code.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@130145 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r129966 | kpfleming | 2008-07-11 09:03:52 -0500 (Fri, 11 Jul 2008) | 5 lines
fix a flaw found while experimenting with structure alignment and padding; low-fence checking would not work properly on 64-bit platforms, because the compiler was putting 4 bytes of padding between the fence field and the allocation memory block
added a very obvious runtime warning if this condition reoccurs, so the developer who broke it can be chastised into fixing it :-)
........
r129967 | kpfleming | 2008-07-11 09:03:52 -0500 (Fri, 11 Jul 2008) | 5 lines
simplify calculation
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@129968 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r129436 | mmichelson | 2008-07-09 14:32:20 -0500 (Wed, 09 Jul 2008) | 13 lines
Fix a problem where inbound rfc2833 audio would be sent to the
core instead of being P2P bridged. When the core regenerated
the rfc2833 packet for the outbound leg, the SSRC would be different
than the RTP audio on the call leg causing DTMF detection issues on
the far end.
(closes issue #12955)
Reported by: tonyredstone
Patches:
dynamic_rtp.patch uploaded by tsearle (license 373)
Tested by: tonyredstone
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@129437 f38db490-d61c-443f-a65b-d21fe96a405b
first SRV result from DNS before processing weights and priorities and
dns_parse_answer wouldn't report that there were no records in DNS
unless a failure occured. Also fixed a bug where dnsmgr_refresh would
report that a entry was being changed when ast_gethostbyname had failed.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@129156 f38db490-d61c-443f-a65b-d21fe96a405b
AMI commands can display that a channel is under control of an AGI.
Work inspired by work at customer site, but paid for by Edvina AB
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@128240 f38db490-d61c-443f-a65b-d21fe96a405b
and not use the p2p rtp bridge). I could not find a way to detect us using the p2p bridge, which
would be nice.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@128197 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127973 | tilghman | 2008-07-03 22:30:30 -0500 (Thu, 03 Jul 2008) | 8 lines
Fix the 'dialplan remove extension' logic, so that it a) works with cidmatch,
and b) completes contexts correctly when the extension is ambiguous.
(closes issue #12980)
Reported by: licedey
Patches:
20080703__bug12980.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@128027 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127663 | murf | 2008-07-02 18:16:25 -0600 (Wed, 02 Jul 2008) | 30 lines
The CDRfix4/5/6 omnibus cdr fixes.
(closes issue #10927)
Reported by: murf
Tested by: murf, deeperror
(closes issue #12907)
Reported by: falves11
Tested by: murf, falves11
(closes issue #11849)
Reported by: greyvoip
As to 11849, I think these changes fix the core problems
brought up in that bug, but perhaps not the more global
problems created by the limitations of CDR's themselves
not being oriented around transfers.
Reopen if necc, but bug reports are not the best
medium for enhancement discussions. We need to start
a second-generation CDR standardization effort to cover
transfers.
(closes issue #11093)
Reported by: rossbeer
Tested by: greyvoip, murf
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@127793 f38db490-d61c-443f-a65b-d21fe96a405b
to document arguments seems logical, and does work, but is not the best
thing to use.
\arg in doxygen is simply for creating non-nested unordered lists. \param is
the correct tag to use to document function parameters, and will come out
better in the generated documentation.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@127401 f38db490-d61c-443f-a65b-d21fe96a405b
callback. This change differs from commit 127113 in that now the
channel is not set to AST_STATE_UP until after the answer callback.
(closes issue #12924)
Reported by: snyfer
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@127157 f38db490-d61c-443f-a65b-d21fe96a405b
- change ast_settimeout() to honor max rate in edge cases of file playback
(this will make some warning messages go away at the end of playing back
a file)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@125332 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125132 | kpfleming | 2008-06-25 17:21:30 -0500 (Wed, 25 Jun 2008) | 10 lines
allow tonezone to live in a different place than DAHDI/Zaptel, since dahdi-tools and dahdi-linux are now separate packages and can be installed in different places
don't include tonezone.h in dahdi_compat.h, because only a couple of modules need it
get app_rpt building again after the DAHDI changes
(closes issue #12911)
Reported by: tzafrir
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@125138 f38db490-d61c-443f-a65b-d21fe96a405b
They want (char *)NULL as sentinel.
An example is OpenBSD (confirmed on 4.3) that ships with gcc 3.3.4
This commit introduces a contstant SENTINEL which is declared as:
#define SENTINEL ((char *)NULL)
All places I could test compile on my openbsd system are converted.
Update CODING-GUIDELINES to tell about this constant.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@124127 f38db490-d61c-443f-a65b-d21fe96a405b
them, and memory does not get free'd causing strange issues with SIP.
This code was originally written by russellb in the team/group/issue_11972/ branch.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@123546 f38db490-d61c-443f-a65b-d21fe96a405b
a memory leak when running the astobj2 test CLI command. After
searching, it appears the leak was in the command handler itself.
Each object was allocated (recount = 1) and then linked into
a container (refounct = 2). Then at the end of the function,
the container was unreffed, causing all the objects to have
their refcount decremented by one, leaving the refcount for
all objects allocated in that function at 1. I've now added
an extra unref to the mix so that the refcount equals zero
when the container is unreffed.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@123526 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r123271 | russell | 2008-06-17 10:48:31 -0500 (Tue, 17 Jun 2008) | 4 lines
Fix a memory leak in astobj2 that was pointed out by seanbright. When a container
got destroyed, the underlying bucket list entry for each object that was in the
container at that time did not get free'd.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@123272 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: ys
Many thanks to ys for doing the research on this problem.
I didn't think it would be best to unlock the contexts
and then relock them after the remove_extension2() call,
so I added an extra arg to remove_extension2() and set it
appropriately in each call. There were not that many.
I considered forcing the code to lock the contexts before
the call to remove_extension2(), but that would require
a slightly greater degree of changes, especially since
the find_context_locked is local to pbx.c
I did a simple sanity test to make sure the code doesn't
mess things up in general.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@123165 f38db490-d61c-443f-a65b-d21fe96a405b
- Convert the last part of channel.c over to use the timing API. This would
not have made a difference when using the dahdi timing module. I noticed
it when trying to use another timing source. Oops. :)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122923 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122713 | mmichelson | 2008-06-13 16:44:53 -0500 (Fri, 13 Jun 2008) | 9 lines
Short circuit the loop in autoservice_run if there are no channels to poll.
If we continued, then the result would be calling poll() with a NULL
pollfd array. While this is fine with POSIX's poll(2) system call, those
who use Asterisk's internal poll mechanism (Darwin systems) would have
a failed assertion occur when poll is called.
(related to issue #10342)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122714 f38db490-d61c-443f-a65b-d21fe96a405b
- Convert chan_iax2 to use the timing API
- Convert usage of timing in the core to use the timing API instead of
using DAHDI directly
- Make a change to the timing API to add the set_rate() function
- change the timing core to use a rwlock
- merge a timing implementation, res_timing_dahdi
Basic testing was successful using res_timing_dahdi
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122523 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: davidw
Patch by: Corydon76, modified by me to work properly with ParkAndAnnounce app
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122433 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122130 | tilghman | 2008-06-12 10:11:30 -0500 (Thu, 12 Jun 2008) | 4 lines
Occasionally, the alertpipe loses its nonblocking status, so detect and correct
that situation before it causes a deadlock. (Reported and tested by ctooley
via #asterisk-dev)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122131 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122127 | murf | 2008-06-12 08:51:44 -0600 (Thu, 12 Jun 2008) | 1 line
Arkadia tried to warn me, but the code added to ast_cdr_busy, _failed, and _noanswer was redundant. Didn't spot it until I was resolving conflicts in trunk. Ugh. Redundant code removed. It wasn't harmful. Just dumb.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122128 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122046 | murf | 2008-06-12 07:47:34 -0600 (Thu, 12 Jun 2008) | 37 lines
(closes issue #10668)
Reported by: arkadia
Tested by: murf, arkadia
Options added to forkCDR() app and the CDR() func to
remove some roadblocks for CDR applications.
The "show application ForkCDR" output was upgraded
to more fully explain the inner workings of forkCDR.
The A option was added to forkCDR to force the
CDR system to NOT change the disposition on the
original CDR, after the fork. This involves
ast_cdr_answer, _busy, _failed, and so on.
The T option was added to forkCDR to force
obedience of the cdr LOCKED flag in the
ast_cdr_end, all the disposition changing
funcs (ast_cdr_answer, etc), and in the
ast_cdr_setvar func.
The CHANGES file was updated to explain ALL
the new options added to satisfy this bug report
(and some requests made verbally and via
email, irc, etc, over the past months/year)
The 's' option was added to the CDR() func,
to force it to skip LOCKED cdr's in the
chain.
Again, the new options should be totally transparent
to existing apps! Current behavior of CDR,
forkCDR, and the rest of the CDR system should
not change one little bit. Until you add the
new options, at least!
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122091 f38db490-d61c-443f-a65b-d21fe96a405b
This commit merges in the rest of the code needed to support distributed device
state. There are two main parts to this commit.
Core changes:
- The device state handling in the core has been updated to understand device
state across a cluster of Asterisk servers. Every time the state of a device
changes, it looks at all of the device states on each node, and determines the
aggregate device state. That resulting device state is what is provided to
modules in Asterisk that take actions based on the state of a device.
New module, res_ais:
- A module has been written to facilitate the communication of events between
nodes in a cluster of Asterisk servers. This module uses the SAForum AIS
(Service Availability Forum Application Interface Specification) CLM and EVT
services (Cluster Management and Event) to handle this task. This module
currently supports sharing Voicemail MWI (Message Waiting Indication) and
device state events between servers. It has been tested with openais, though
other implementations of the spec do exist.
For more information on testing distributed device state, see the following doc:
- doc/distributed_devstate.txt
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121559 f38db490-d61c-443f-a65b-d21fe96a405b
This commit pulls in a batch of improvements and additions to the event API.
Changes include:
- the ability to dynamically build a subscription. This is useful if you're
building a subscription based on something you receive from the network,
or from options in a configuration file.
- Add tables of event types and IE types and the corresponding string
representation for implementing text based protocols that use these
events, for showing events on the CLI, reading configuration that
references event information, among other things.
- Add a table that maps IE types and the corresponding payload type.
- an API call to get the total size of an event
- an API call to get all events from the cache that match a subscription
- a new IE payload type, raw, which I used for transporting the Entity ID in
my code for handling distributed device state.
- Code improvements to reduce code duplication
- Include the Entity ID of the server that originated the event in every event
- an additional event type, DEVICE_STATE_CHANGE, to help facilitate distributed
device state. DEVICE_STATE is a state change on one server, DEVICE_STATE_CHANGE
is the aggregate device state change across all servers.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121555 f38db490-d61c-443f-a65b-d21fe96a405b
This commit breaks out some logic from pbx.c into a simple API. The hint
processing code had logic for taking the state from multiple devices and
turning that into the state for a single extension. So, I broke this out
and made an API that lets you take multiple device states and determine
the aggregate device state. I needed this for some core device state changes
to support distributed device state.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121501 f38db490-d61c-443f-a65b-d21fe96a405b
DUNDi uses a concept called the Entity ID for unique server identifiers. I have
pulled out the handling of EIDs and made it something available to all of Asterisk.
There is now a global Entity ID that can be used for other purposes as well, such
as code providing distributed device state, which is why I did this. The global
Entity ID is set automatically, just like it was done in DUNDi, but it can also be
set in asterisk.conf. DUNDi will now use this global EID unless one is specified
in dundi.conf.
The current EID for the system can be seen in the "core show settings" CLI command.
It is also available in the dialplan via the ENTITYID variable.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121439 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r121280 | russell | 2008-06-09 11:35:40 -0500 (Mon, 09 Jun 2008) | 10 lines
Do not attempt to do emulation if an END digit is received and the length is
less than the defined minimum digit length, and the other end only wants END
digits (SIP INFO, for example).
(closes issue #12778)
Reported by: tsearle
Patches:
12778.rev1.txt uploaded by russell (license 2)
Tested by: tsearle
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121282 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r120863 | jpeeler | 2008-06-06 10:33:15 -0500 (Fri, 06 Jun 2008) | 3 lines
This fixes a crash when LOW_MEMORY is turned on. Two allocations of the ast_rtp struct that were previously allocated on the stack have been modified to use thread local storage instead.
........
r120885 | jpeeler | 2008-06-06 11:39:20 -0500 (Fri, 06 Jun 2008) | 2 lines
Correction to commmit 120863, make sure proper destructor function is called as well define two thread storage local variables.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@120906 f38db490-d61c-443f-a65b-d21fe96a405b
and normal deviations. Currently this is implemented for chan_sip, but could be added to the func_channel_read callbacks for the CHANNEL function
for any channel that uses RTP.
(closes issue #10590)
Reported by: gasparz
Patches:
chan_sip_c.diff uploaded by gasparz (license 219)
rtp_c.diff uploaded by gasparz (license 219)
rtp_h.diff uploaded by gasparz (license 219)
audioqos-trunk.diff uploaded by snuffy (license 35)
rtpqos-trunk-r119891.diff uploaded by sergee (license 138)
Tested by: jsmith, gasparz, snuffy, marsosa, chappell, sergee
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@120635 f38db490-d61c-443f-a65b-d21fe96a405b
has been loaded, fix a return value in the loader, and ensure that the help
workhorse header does not print on load.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@120602 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r120173 | jpeeler | 2008-06-03 17:15:33 -0500 (Tue, 03 Jun 2008) | 6 lines
(closes issue #11594)
Reported by: yem
Tested by: yem
This change decreases the buffer size allocated on the stack substantially in config_text_file_load when LOW_MEMORY is turned on. This change combined with the fix from revision 117462 (making mkintf not copy the zt_chan_conf structure) was enough to prevent the crash.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@120174 f38db490-d61c-443f-a65b-d21fe96a405b
and off for new installations. This includes the translation from pipes to commas
for pbx_realtime and the EXEC command for AGI, as well as the change to the Set
application not to support multiple variables at once.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@120171 f38db490-d61c-443f-a65b-d21fe96a405b
hold tracking information for mutexes. Now, the "core show locks" output
will output information about who is holding a rwlock when a thread is
waiting on it.
(closes issue #11279)
Reported by: ys
Patches:
trunk_lock_utils.v8.diff uploaded by ys (license 281)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@120064 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r119742 | russell | 2008-06-02 09:39:45 -0500 (Mon, 02 Jun 2008) | 5 lines
Improve CLI command blacklist checking for the command manager action. Previously,
it did not handle case or whitespace properly. This made it possible for blacklisted
commands to get executed anyway.
(closes issue #12765)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@119744 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r119156 | russell | 2008-05-29 17:24:29 -0500 (Thu, 29 May 2008) | 10 lines
Fix a race condition in channel autoservice. There was still a small window of opportunity
for a DTMF frame, or some other deferred frame type, to come in and get dropped.
(closes issue #12656)
(closes issue #12656)
Reported by: dimas
Patches:
v3-12656.patch uploaded by dimas (license 88)
-- with some modifications by me
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@119157 f38db490-d61c-443f-a65b-d21fe96a405b
or you get undefined variable errors when you are compiling under the influence
of MTX_PROFILE
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@119074 f38db490-d61c-443f-a65b-d21fe96a405b
before we enter manage_parkinglot.
This will get rid of CLI warnings like:
__ast_read: Exception flag set on 'SIP/<NUMBER>-<ID>', but no exception handler
(closes issue #12748)
Reported by: nreinartz
Patches:
asterisk-multiparking_initialize_filedescr_sets-0.0.1.patch uploaded by nreinartz (license 452)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@119015 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118858 | murf | 2008-05-28 18:25:28 -0600 (Wed, 28 May 2008) | 46 lines
(closes issue #10668)
(closes issue #11721)
(closes issue #12726)
Reported by: arkadia
Tested by: murf
These changes:
1. revert the changes made via bug 10668;
I should have known that such changes,
even tho they made sense at the time,
seemed like an omission, etc, were actually
integral to the CDR system via forkCDR.
It makes sense to me now that forkCDR didn't
natively end any CDR's, but rather depended
on natively closing them all at hangup time
via traversing and closing them all, whether
locked or not. I still don't completely
understand the benefits of setvar and answer
operating on locked cdrs, but I've seen
enough to revert those changes also, and
stop messing up users who depended on that
behavior. bug 12726 found reverting the changes
fixed his changes, and after a long review
and working on forkCDR, I can see why.
2. Apply the suggested enhancements proposed
in 10668, but in a completely compatible
way. ForkCDR will behave exactly as before,
but now has new options that will allow some
actions to be taken that will slightly
modify the outcome and side-effects of
forkCDR. Based on conversations I've had
with various people, these small tweaks
will allow some users to get the behavior
they need. For instance, users executing
forkCDR in an AGI script will find the
answer time set, and DISPOSITION set,
a situation not covered when the routines
were first written.
3. A small problem in the cdr serializer
would output answer and end times even
when they were not set. This is now
fixed.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@118880 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118551 | tilghman | 2008-05-27 14:15:27 -0500 (Tue, 27 May 2008) | 6 lines
When showing an error message for a command, don't shorten the command output,
as it tends to confuse the user (it's fine for suggesting other commands,
however).
Reported by: seanbright (on #asterisk-dev)
Fixed by: me
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@118554 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118465 | tilghman | 2008-05-27 13:58:09 -0500 (Tue, 27 May 2008) | 8 lines
NULL character should terminate only commands back to the core, not log
messages to the console.
(closes issue #12731)
Reported by: seanbright
Patches:
20080527__bug12731.diff.txt uploaded by Corydon76 (license 14)
Tested by: seanbright
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@118466 f38db490-d61c-443f-a65b-d21fe96a405b
If a deadlock is detected, then the typical lock information will be
printed along with a backtrace of the stack for the offending threads.
Use of this requires compiling with DETECT_DEADLOCKS and having glibc
installed.
Furthermore, issuing the "core show locks" CLI command will print the
normal lock information as well as a backtraces for each lock. This
requires that DEBUG_THREADS is enabled and that glibc is installed.
All the backtrace features may be disabled by running the configure
script with --without-execinfo as an argument
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@118173 f38db490-d61c-443f-a65b-d21fe96a405b
requires manager authentication for any POST's being sent to the server as well to help secure uploads.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@118161 f38db490-d61c-443f-a65b-d21fe96a405b
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117802 f38db490-d61c-443f-a65b-d21fe96a405b
display this information in the "core show settings" CLI command. This is
useful if you want to verify that you're running a build with DONT_OPTIMIZE,
DEBUG_THREADS, etc.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117756 f38db490-d61c-443f-a65b-d21fe96a405b
Until this change, all verbose messages in Asterisk's log files reported logger.c
as the source of the message.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117693 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r117507 | russell | 2008-05-21 13:19:34 -0500 (Wed, 21 May 2008) | 7 lines
1) Don't print the verbose marker in front of every message from ast_verbose()
being sent to remote consoles.
2) Fix pbx_gtkconsole to filter out the verbose marker.
(related to issue #12702)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117508 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r117479 | russell | 2008-05-21 13:11:51 -0500 (Wed, 21 May 2008) | 6 lines
Don't display the verbose marker for calls to ast_verbose() that do not include
a VERBOSE_PREFIX in front of the message.
(closes issue #12702)
Reported by: johnlange
Patched by me
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117481 f38db490-d61c-443f-a65b-d21fe96a405b
a configuration file. As it was, only the first did so. This led to
a problem if the included file was changed (but not the configuration
file which includes it) and the second source file attempted to reload
the configuration. It would not see that the included file had changed.
In this particular example, res_phoneprov and chan_sip both loaded
sip.conf, which included a file call sip.peers.conf. Since res_phoneprov
was the first to load sip.conf, only it cached the fact that sip.conf
included sip.peers.conf. If sip.peers.conf were changed and sip.conf were
not and a sip reload were issued (meaning that chan_sip attempts to
reload sip.conf only if it and its included files have changed) the changes
made to sip.peers.conf would not be seen and therefore no action would be
taken.
(closes issue #12693)
Reported by: marsosa
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117367 f38db490-d61c-443f-a65b-d21fe96a405b
last match, and possibly skip empty fields. The function is useful
(and used here) when a form submits multiple 'Action' fields to the
Manager.
This change slightly modifies the current behaviour, but only in the
case the user supplies multiple 'Action: ' lines and the first
ones are empty, so the change is totally harmless.
+ Fix style on a couple of "if (displayconnects)" statements;
+ Expand a bit the 'Manager Test' interface, to make it slightly
more user friendly. But also comment that the HTML should not
be embedded in the C source.
None of this stuff needs to be applied to 1.4.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117297 f38db490-d61c-443f-a65b-d21fe96a405b
same name in http queries, which might confuse the manager.
Replace calls to ast_uri_decode() with a local function that also
replaces '+' with ' ', as this is the normal encoding for
spaces in http requests.
This allows passing cli commands to the manager through the
http interface.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117295 f38db490-d61c-443f-a65b-d21fe96a405b
of platform/compiler-dependent warnings when handing
struct timeval fields, both reading and printing them.
It is a lost battle to handle the different ways struct timeval
is handled on the various platforms and compilers, so try
to be pragmatic and go through int/long which are universally
supported.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@116557 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r116088 | mmichelson | 2008-05-13 18:47:49 -0500 (Tue, 13 May 2008) | 12 lines
A change to the way channel locks are handled when DEBUG_CHANNEL_LOCKS is defined.
After debugging a deadlock, it was noticed that when DEBUG_CHANNEL_LOCKS
is enabled in menuselect, the actual origin of channel locks is obscured
by the fact that all channel locks appear to happen in the function
ast_channel_lock(). This code change redefines ast_channel_lock to be a
macro which maps to __ast_channel_lock(), which then relays the proper
file name, line number, and function name information to the core lock
functions so that this information will be displayed in the case that
there is some sort of locking error or core show locks is issued.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@116089 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r115990 | russell | 2008-05-13 16:05:57 -0500 (Tue, 13 May 2008) | 5 lines
Fix an issue that I noticed in autoservice while mmichelson and I were debugging
a different problem. I noticed that it was theoretically possible for two threads
to attempt to start the autoservice thread at the same time. This change makes the
process of starting the autoservice thread, thread-safe.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@116001 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r115735 | mmichelson | 2008-05-12 12:51:14 -0500 (Mon, 12 May 2008) | 7 lines
If a thread holds no locks, do not print any information on the thread when issuing
a core show locks command. This will help to de-clutter output somewhat.
Russell said it would be fine to place this improvement in the 1.4 branch, so that's
why it's going here too.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115737 f38db490-d61c-443f-a65b-d21fe96a405b
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115588 f38db490-d61c-443f-a65b-d21fe96a405b
new paramater. The new options for ENUM* functions include 'u', 's', 'i', and 'd' which return the full uri, trigger isn specific rewriting, look
for branches into an infrastructure enum tree, or do a direct dns lookup of a number respectively. The new paramater for TXCIDNAME adds a
zone-suffix argument for looking up caller id's in DNS that aren't e164.arpa.
This patch is based on the original code from otmar, modified by snuffy, and tested by jtodd, me, and others.
(closes issue #8089)
Reported by: otmar
Patches:
20080508_bug8089-1.diff
- original code by otmar (license 480),
- revised by snuffy (license 35)
Tested by: oej, otmar, jtodd, Corydon76, snuffy, alexnikolov, bbryant
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115584 f38db490-d61c-443f-a65b-d21fe96a405b
to use doubly linked lists. The schedule() function had an optimization that
had it try to guess which direction would be better for the traversal to insert
the task into the scheduler queue. However, if the code chose the path where
it traversed the queue in reverse, and the result was that the task should be
at the head of the queue, then the code would actually put it at the tail,
instead.
(Problem found by bbryant, debugged and fixed by bbryant and me)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115537 f38db490-d61c-443f-a65b-d21fe96a405b
being #included twice. This was due to the fact that #exec created a temporary file which
was then #included. The name of the temporary file was the name of the #exec'd file, with
the Unix timestamp and thread ID concatenated. The issue was that if multiple #exec statements
of the same file were reached in the same second, then the result was that the temporary files
would have duplicate names. To resolve this, the temporary file now has microsecond resolution
for the timestamp portion.
(closes issue #12574)
Reported by: jmls
Patches:
12574.patch uploaded by putnopvut (license 60)
Tested by: jmls, putnopvut
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115329 f38db490-d61c-443f-a65b-d21fe96a405b
A task wraps a callback function pointer and a data pointer and is managed internal to the taskprocessor subsystem. The callback function is responsible for releasing task data.
Taskprocessor API
* ast_taskprocessor_get(..) - returns a reference to a taskprocessor
* ast_taskprocessor_unreference(..) - releases reference to a taskprocessor
* ast_taskprocessor_push(..) - push a task into a taskprocessor queue
Check doxygen for more details
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115268 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r115017 | tilghman | 2008-05-01 13:59:08 -0500 (Thu, 01 May 2008) | 6 lines
'#' is another reserved character for URIs that also needs to be escaped.
(closes issue #10543)
Reported by: blitzrage
Patches:
20080418__bug10543.diff.txt uploaded by Corydon76 (license 14)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115018 f38db490-d61c-443f-a65b-d21fe96a405b
and denoising to a channel, AGC() and DENOISE(). Also included, is a change
to the audiohook API to add a new function (ast_audiohook_remove) that can
remove an audiohook from a channel before it is detached.
This code is based on a contribution from Switchvox.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114926 f38db490-d61c-443f-a65b-d21fe96a405b
party to be spoken instead of the channel name or number.
This was accomplished by adding a new function pointer to point to a function in app_voicemail
which retrieves the name file and plays it. This makes for an easy way that applications may play
a user's name should it be necessary. app_directory, in particular, can be simplified greatly by
this change.
This change comes as a suggestion from Switchvox, which already has this feature. AST-23
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114813 f38db490-d61c-443f-a65b-d21fe96a405b
Add some additional features to the core park_call_full() function, and expose
them as options to the Park() application. The functionality being added is the
ability to specify a custom return extension/context/priority, a custom timeout,
and a couple of options. The options are to play ringing instead of MOH to the
parked caller, and to randomize parking spot selection.
(code inspired by the patch in AST-17, code from switchvox)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114655 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114600 | russell | 2008-04-23 17:18:12 -0500 (Wed, 23 Apr 2008) | 6 lines
Improve some broken cookie parsing code. Previously, manager login over HTTP
would only work if the mansession_id cookie was first. Now, the code builds
a list of all of the cookies in the Cookie header. This fixes a problem
observed by users of the Asterisk GUI.
(closes AST-20)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114601 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114591 | russell | 2008-04-23 12:55:31 -0500 (Wed, 23 Apr 2008) | 5 lines
Store the manager session ID explicitly as 4 byte ID instead of a ulong. The
mansession_id cookie is coded to be limited to 8 characters of hex, and this
could break logins from 64-bit machines in some cases.
(inspired by AST-20)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114592 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114579 | file | 2008-04-23 11:54:11 -0300 (Wed, 23 Apr 2008) | 4 lines
Instead of stopping dialplan execution when SayNumber attempts to say a large number that it can not print out a message informing the user and continue on.
(closes issue #12502)
Reported by: bcnit
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114580 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: triccyx
I had a bit a problem reproducing this in my setup (trying not to disturb my other stuff)
but finally, I got it. The problem appears to be that the extension is being added in
replace mode, which kinda assumes that the pattern trie has been formed, when in fact,
in this case, it was not. The checks being done are not nec. when the tree is not yet
formed, as changes like this will be summarized when the trie is formed in the future.
I tested the fix, and the crash no longer happens. Feel free to open the bug again if
this fix doesn't cure the problem.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114553 f38db490-d61c-443f-a65b-d21fe96a405b
I gathered the code that filled the string, and put it in a different func which
I cryptically call "append_lock_information()".
Now, both log_show_lock(), and handle_show_locks() both call this code to do
the work. Tested, seems to work fine.
Also, log_show_lock was modified to use the ast_str stuff, along with checking
for successful ast_str creation, and freeing the ast_str obj when finished.
A break was inserted to terminate the search for the lock; we should never
see it twice.
An example usage in chan_sip.c was created as a comment, for instructional
purposes.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114520 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114487 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: atis
Tested by: murf
This upgrade adds the ~~ (concatenation) string operator to expr2.
While not needed in normal runtime pbx operation, it is needed when
raw exprs are being syntax checked. This plays into future syntax-
unification plans. By permission of atis, this addition in trunk
and the reason of why things are as they are will suffice to close
this bug.
I also added a short note about the previous addition of "sip show sched"
to the CLI in CHANGES, which I discovered I forgot in a previous commit.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114423 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114207 | mmichelson | 2008-04-17 11:28:03 -0500 (Thu, 17 Apr 2008) | 12 lines
It was possible for a reference to a frame which was part of a freed DSP to still be
referenced, leading to memory corruption and eventual crashes. This code change ensures
that the dsp is freed when we are finished with the frame. This change is very similar
to a change Russell made with translators back a month or so ago.
(closes issue #11999)
Reported by: destiny6628
Patches:
11999.patch uploaded by putnopvut (license 60)
Tested by: destiny6628, victoryure
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114208 f38db490-d61c-443f-a65b-d21fe96a405b
a. fix a self-found problem with SPAWN-ing an extension,
where matches were not being found
b. correct some wording in a comment
c. Add some debug for future debugging.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114146 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114117 | mmichelson | 2008-04-14 12:41:03 -0500 (Mon, 14 Apr 2008) | 11 lines
Increase the retry count when attempting to show channels. This apparently
cleared an issue someone was seeing when attempting to show channels when
the load was high.
(closes issue #11667)
Reported by: falves11
Patches:
11677.txt uploaded by russell (license 2)
Tested by: falves11
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114118 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114106 | mmichelson | 2008-04-14 09:58:02 -0500 (Mon, 14 Apr 2008) | 5 lines
Save a local copy of the generate callback prior to unlocking the channel in
case the generate callback goes NULL on us after the channel is unlocked. Thanks
to Russell for pointing this need out to me.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114107 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114100 | file | 2008-04-14 10:52:49 -0300 (Mon, 14 Apr 2008) | 4 lines
Don't change the SSRC when a new source comes into play, this might happen quite often and depending on the remote side... they might not like this.
(closes issue #12353)
Reported by: dimas
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114101 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114035 | qwell | 2008-04-10 12:26:10 -0500 (Thu, 10 Apr 2008) | 10 lines
Only try to prefix language if we are not using an absolute path (suffix it otherwise).
en/var/lib/asterisk/sounds/blah.gsm is a very silly path.
(closes issue #12379)
Reported by: kuj
Patches:
12379-absolutepath.diff uploaded by qwell (license 4)
Tested by: kuj, qwell
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114036 f38db490-d61c-443f-a65b-d21fe96a405b
were handled. In 1.4, if the absolute timeout were reached on a call, no matter what
the return value of ast_spawn_extension was, the pbx would attempt to go to the 'T'
extension or hangup otherwise. The rearrangement of this function in trunk made this check
only happen in the case that ast_spawn_extension returned 0. If ast_spawn_extension returned
1, then the fact that the timeout expired resulted in a no-op, and would cause an infinite
loop to occur in __ast_pbx_run. This change fixes this problem. Now timeouts will
behave as they did in 1.4
(closes issue #11550)
Reported by: pj
Tested by: putnopvut
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@113836 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r113296 | file | 2008-04-08 12:03:43 -0300 (Tue, 08 Apr 2008) | 4 lines
If audio suddenly gets fed into one side of a channel after a lapse of frames flush the other factory so that old audio does not remain in the factory causing the sync code to not execute.
(closes issue #12296)
Reported by: jvandal
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@113297 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r113065 | mmichelson | 2008-04-07 11:08:45 -0500 (Mon, 07 Apr 2008) | 13 lines
This fix prevents a deadlock that was experienced in chan_local. There was
deadlock prevention in place in chan_local, but it would not work in a specific
case because the channel was recursively locked. By unlocking the channel prior
to calling the generator's generate callback in ast_read_generator_actions(), we
prevent the recursive locking, and therefore the deadlock.
(closes issue #12307)
Reported by: callguy
Patches:
12307.patch uploaded by putnopvut (license 60)
Tested by: callguy
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@113066 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r112468 | mmichelson | 2008-04-02 12:36:04 -0500 (Wed, 02 Apr 2008) | 13 lines
Fix a race condition in the manager. It is possible that a new manager event
could be appended during a brief time when the manager is not waiting for input.
If an event comes during this period, we need to set an indicator that there is an
event pending so that the manager doesn't attempt to wait forever for an event that
already happened.
(closes issue #12354)
Reported by: bamby
Patches:
manager_race_condition.diff uploaded by bamby (license 430)
(comments added by me)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@112469 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: falves11
Patches:
12298.patch1 uploaded by murf (license 17)
Tested by: murf
I have hopes that the changes made over the last few days will
finalize and solidify this code. While there are bound to be
small tweaks still needed, I feel that the job (at last) is
somewhat completed. Finally, I had a chance to comprehend how
the scoring of extension patterns was done in the previous
version, and I've come very close to using the exact same
criteria in the new pattern matching code. The left-right
sorting is now replicated in the trie structure itself, such
that the first match found will the 'best' match. Compared
the results against 1.4 for several extensions. Replicated
falves11's setup and it works. Used some devious patterns
provided by jsmith, supplemented with a few of my own.
Looks good.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@112289 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r112209 | file | 2008-04-01 15:02:43 -0300 (Tue, 01 Apr 2008) | 4 lines
Disable Packet2Packet bridging when we need to feed DTMF frames into the core. Some implementations do not like how we switch between things.
(closes issue #12212)
Reported by: bamby
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@112210 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111391 | murf | 2008-03-27 07:03:28 -0600 (Thu, 27 Mar 2008) | 9 lines
These small documentation updates made in response to a query in
asterisk-users, where a user was using Playback, but needed the
features of Background, and had no idea that Background existed,
or that it might provide the features he needed. I thought the
best way to avert these kinds of queries was to provide "See Also"
references in all three of "Background", "Playback", "WaitExten".
Perhaps a project to do this with all related apps is in order.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@111410 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111245 | qwell | 2008-03-26 18:26:33 -0500 (Wed, 26 Mar 2008) | 9 lines
Remove excessive smoother optimization that was causing audio glitches (small "pops")
after (about 200ms later) an "incorrectly" sized frame was received.
While it would be very nice to keep this as optimized as possible, it makes no sense
for the smoother to be dropping random bits of audio like this. Isn't that the
whole point of a smoother?
Closes issue #12093.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@111246 f38db490-d61c-443f-a65b-d21fe96a405b
Per comments from dimas:
1. The code now generates DTMF_BEGIN frames in addition to DTMF_END ones.
2. "quelching" rewritten - now each detector (MF/DTMF/generic tone) may mark fragment of a frame for suppression (squelching, muting) with a call to mute_fragment. Actual muting happens only once at the very end of ast_dsp_process where all marked fragments are zeroed. This way every detector sees original data in the frame without any piece of a frame being zeroed by a detector which was run before.
3. DTMF detector tries to "mute" one block before and one block after the block where actual tone was detected. Muting of previois block is something new for this patch. Obviously this operation is not always possible - if current frame does not contain data for previous block - it is too late. But at least we make our best.
Muting of next block was already done by the old code but it only affects part of the next block which is in the frame being processed. New code keeps this information in state structures so it will mute proper number of samples in the next frame(s) too.
4. Removed ast_dsp_digitdetect and ast_dsp_getdigits APIs because these are not used.
5. DSP API extended a bit - ast_dsp_was_muted() function added which returns true if DSP code was muting any fragment in the last frame. chan_zap uses this function to decide it needs to turn on confmute on the channel.
This is to replace AST_FRAME_DTMF 'm'/'u' (mute/unmute) functionality.
(closes issue #11968)
Reported by: dimas
Patches:
v2-11968-dsp.patch uploaded by dimas (license 88)
v4-11968-zap.patch uploaded by dimas (license 88)
Tested by: dimas, qwell
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@111022 f38db490-d61c-443f-a65b-d21fe96a405b
change, it was possible to start Asterisk with the manager interface enabled, then
either comment out the enabled option or make manager.conf unopenable and the manager
interface would still be enabled.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@110831 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110628 | file | 2008-03-25 11:37:35 -0300 (Tue, 25 Mar 2008) | 4 lines
Add an option (transmit_silence) which transmits silence during both Record() and DTMF generation. The reason this is an option is that in order to transmit silence we have to setup a translation path. This may not be needed/wanted in all cases.
(closes issue #10058)
Reported by: tracinet
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@110629 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110395 | russell | 2008-03-20 18:13:56 -0500 (Thu, 20 Mar 2008) | 9 lines
Shorten the ast_waitfor() timeout from 500 ms to 50 ms in the autoservice thread.
This really should not make a difference except in very rare cases. That case would
be that all of the channels in autoservice are not generating any frames. In that
case, this change reduces the potential amount of time that a thread waits in
ast_autoservice_stop() for the autoservice thread to wrap back around to the beginning
of its loop.
(closes issue #12266, reported by dimas)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@110396 f38db490-d61c-443f-a65b-d21fe96a405b
other than 8 kHz. The issue here is that format modules give a "whennext" sample
value, which is used to calculate when to set a timer for to retrieve the next
frame. However, the zaptel timer operates on 8 kHz samples, so this must be taken
into account.
(another part of issue #12164, reported by milazzo and jsmith, patch by me)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@110303 f38db490-d61c-443f-a65b-d21fe96a405b
G.722 music on hold working for me.
(issue #12164, reported by milazzo and jsmith, patches by me)
res/res_musiconhold.c:
- I moved a single line so that the sample queue update happened before
ast_write(). The reason that this was a bug is that the G.722 frame
originally says it has 320 samples in it (which is correct). However,
when the frame is written to a channel that uses RTP, main/rtp.c modifies
the frame to cut the number of samples in half before it sends it on
the wire. This is to account for the stupid incorrect G.722 spec that
makes it so we have to lie about the number of samples with RTP. I should
probably go and re-work the RTP code so it doesn't modify the frame so
that a bug like this won't happen in the future. However, this change to
MOH is harmless.
main/channel.c:
- I made two fixes in regards to generator timing. Generators use samples
for timing. However, this code assumed 8 kHz samples. In one case, it was
a hard coded 160 samples, that is now written as the sample rate / 50. The
other place was dealing with timing a generator based on frames coming from
the other direction. However, that would have only worked if the sample
rates for the formats in both directions were the same. The code now takes
into account that the sample rates may differ, and scales the generator
samples accordingly.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@110268 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110019 | file | 2008-03-19 15:20:28 -0300 (Wed, 19 Mar 2008) | 6 lines
Make sure that the mark bit does not incorrectly cause video frame timestamps to be calculated as if they are audio frames.
(closes issue #11429)
Reported by: sperreault
Patches:
11429-frametype.diff uploaded by qwell (license 4)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@110020 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109908 | murf | 2008-03-19 09:41:13 -0600 (Wed, 19 Mar 2008) | 72 lines
(closes issue #11442)
Reported by: tzafrir
Patches:
11442.patch uploaded by murf (license 17)
Tested by: murf
I didn't give tzafrir very much time to test this, but if he does
still have remaining issues, he is welcome to
re-open this bug, and we'll do what is called for.
I reproduced the problem, and tested the fix, so I hope I
am not jumping by just going ahead and committing the fix.
The problem was with what file_save does with templates;
firstly, it tended to print out multiple options:
[my_category](!)(templateref)
instead of
[my_category](!,templateref)
which is fixed by this patch.
Nextly, the code to suppress output of duplicate declarations
that would occur because the reader copies inherited declarations
down the hierarchy, was not working. Thus:
[master-template](!)
mastervar = bar
[template](!,master-template)
tvar = value
[cat](template)
catvar = val
would be rewritten as:
;!
;! Automatically generated configuration file
;! Filename: experiment.conf (/etc/asterisk/experiment.conf)
;! Generator: Manager
;! Creation Date: Tue Mar 18 23:17:46 2008
;!
[master-template](!)
mastervar = bar
[template](!,master-template)
mastervar = bar
tvar = value
[cat](template)
mastervar = bar
tvar = value
catvar = val
This has been fixed. Since the config reader 'explodes' inherited
vars into the category, users may, in certain circumstances, see
output different from what they originally entered, but it should
be both correct and equivalent.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@109942 f38db490-d61c-443f-a65b-d21fe96a405b