From a user point-of-view, this adds new CLI commands and Manager Actions to
better facilitate the reloading of queues and the resetting of their statistics.
The new CLI commands are the "queue reload" and "queue reset stats" commands.
The new manager actions are the QueueReload and QueueReset commands.
Review: http://reviewboard.digium.com/r/115
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@175663 f38db490-d61c-443f-a65b-d21fe96a405b
This patch adds forceencryption=yes as an iax.conf option. When force encryption is enabled, no unencrypted connections are allowed. This insures all connections are encrypted. This is a new feature, so CHANGES and iax.conf.sample are updated as well.
(closes issue #13285)
Reported by: sgofferj
Tested by: russell
Review: http://reviewboard.digium.com/r/150/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@175344 f38db490-d61c-443f-a65b-d21fe96a405b
This is very similar to the DAHDI immediate=yes option. When the phone is picked up, instead of giving a dialtone it connects directly to the "s" extension. Changes where implemented in chan_iax2.c to directly connect to the "s" extension in the appropriate context when this option is enabled. Examples explaining its use are added to iax2.conf.sample. CHANGES has been updated as well.
(closes issue #14266)
Reported by: jcovert
Patches:
chan_iax2.c.patch-trunk uploaded by jcovert (license 551)
iax.conf.sample.patch uploaded by jcovert (license 551)
Tested by: jcovert, dvossel
Review: http://reviewboard.digium.com/r/143/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@174046 f38db490-d61c-443f-a65b-d21fe96a405b
reviewboard this before committing again...
reopened 11583 until all Russell's issues are
resolved.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@172929 f38db490-d61c-443f-a65b-d21fe96a405b
to be used within the dial app, before a call is bridged.
Many thanks to sobomax for submitting this patch.
Quoting from bug 11582:
"So the goal of the patch was to use the user configured feature code during the
call setup phase. The original ast_feature_interpret() function is not well suited
for this purpose as it uses much call bridge specific data and doesn't separate a
detection of feature from a feature handler call. So a new function ast_feature_detect()
has been extracted off the ast_feature_interpret() function but keeping the original
logic intact except some insignificant changes to locking.
"Having created the ast_feature_detect() function the possibility to use feature detection
in almost any place of the asterisk code. So a call to this function has been added to
wait_for_answer() function of app_dial.so module. This code doesn't call the feature handler
however and uses old call leg disconnect logic to make the changes as small and simple as
possible to prevent unexpected problems. A disconnect feature currently is the only one
supported during call setup as other features as call parking and call transfer don't make much
sense during call setup. However if need in some of the features would arise it is much easier to
implement as the infrastructure changes are already in place with this patch."
I have cleaned up the patch somewhat, and verified that the existing functionality is not
harmed, and that the new functionality works. Terry has committed his stuff, and there were
no conflicts (see 14274).
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
patch-include__asterisk__features.h uploaded by sobomax (license 359)
patch-res__res_features.c uploaded by sobomax (license 359)
enable-features-during-call-setup.diff uploaded by sobomax (license 359)
11583.newdiff uploaded by murf (license 17)
enable-features-during-call-setup-1.diff uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
Tested by: sobomax, murf
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@172890 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172517 | twilson | 2009-01-30 11:47:41 -0600 (Fri, 30 Jan 2009) | 37 lines
Fix feature inheritance with builtin features
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@172580 f38db490-d61c-443f-a65b-d21fe96a405b
With this commit, a register => line in sip.conf may contain a port number in the
"user" section of the line. Please see CHANGES and sip.conf.sample for more
details regarding this.
(closes issue #14198)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domainport2.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@168575 f38db490-d61c-443f-a65b-d21fe96a405b
This patch adds the functionality to app_queue of calculating
the average amount of time that channels are bridged for a
queue. The algorithm used to calculate the average is the same
exponential average currently used to calculate the average holdtime.
See the CHANGES file to see the methods you may use to view this
information.
(closes issue #13960)
Reported by: coolmig
Patches:
app_queue.c.diff.trunk-r158840 uploaded by coolmig (license 621)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@167792 f38db490-d61c-443f-a65b-d21fe96a405b
This function is being added as a method to allow for
an audiohook to move to a new channel during a channel
masquerade. The most obvious use for such a facility is
for MixMonitor when a transfer is performed. Prior to
the addition of this functionality, if a channel
running MixMonitor was transferred by another party, then
the recording would stop once the transfer had completed.
By using AUDIOHOOK_INHERIT, you can make MixMonitor
continue recording the call even after the transfer
has completed.
It has also been determined that since this is seen
by most as a bug fix and is not an invasive change,
this functionality will also be backported to 1.4 and
merged into the 1.6.0 branches, even though they are
feature-frozen.
(closes issue #13538)
Reported by: mbit
Patches:
13538.patch uploaded by putnopvut (license 60)
Tested by: putnopvut
Review: http://reviewboard.digium.com/r/102/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@166092 f38db490-d61c-443f-a65b-d21fe96a405b
enabled (either globally or for a specific peer), chan_sip will treat any SDP
data it receives as new data and update the media stream accordingly. By
default, Asterisk will only modify the media stream if the SDP session version
received is different from the current SDP session version. This option is
required to interoperate with devices that have non-standard SDP session
version implementations (observed by toc on the bug tracker with Microsoft OCS
which always uses 0 as the session version).
http://reviewboard.digium.com/r/94/
(closes issue #13958)
Reported by: toc
Tested by: toc
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@165180 f38db490-d61c-443f-a65b-d21fe96a405b
Terry Wilson created the original patch for this functionality, which I slightly modified and added
the faxdetect=yes|no configuration option. This patch is only for T38 fax detection and does not
do anything for G711 over SIP fax detection. By default, this option is disabled.
Reviewboard: http://reviewboard.digium.com/r/69/
This functionality is for issue AST-140.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@161115 f38db490-d61c-443f-a65b-d21fe96a405b
Based on cli_permissions.conf configuration file, we are able to permit or deny
cli commands based on some patterns and the local user and group running rasterisk.
(Sorry if I missed some of the testers).
Reviewboard: http://reviewboard.digium.com/r/11/
(closes issue #11123)
Reported by: eliel
Tested by: eliel, IgorG, Laureano, otherwiseguy, mvanbaak
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@160062 f38db490-d61c-443f-a65b-d21fe96a405b
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@156120 f38db490-d61c-443f-a65b-d21fe96a405b
remotesecret => our password for a remote service
secret => our authentication when someone calls us
Secret => still has both functions if remotesecret is not used.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@153904 f38db490-d61c-443f-a65b-d21fe96a405b
had no effect
* Updated dialing API documentation to indicate that timeouts
are specified in milliseconds
* Added a new timeout argument to the Page application. If time
expires, any endpoints which have not answered will be hung up.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@153223 f38db490-d61c-443f-a65b-d21fe96a405b
the low default value of featuredigittimeout, I decided it
was high time to change it. I have changed the default to
2000 ms based on a suggestion from Leif Madsen.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@152807 f38db490-d61c-443f-a65b-d21fe96a405b
for more details of this command.
(closes issue #13326)
Reported by: ib2
Patches:
bug13326_trunk_20080822.diff uploaded by snuffy (license 35)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@150311 f38db490-d61c-443f-a65b-d21fe96a405b
and "leavewhenempty" options are configured in queues.conf.
Instead of using vague terms like "yes," "no," "loose," and
"strict," we now accept a comma-separated list of values
to determine when to consider a member available.
Extended details can be found in the queues.conf.sample
file. Note also that the above four referenced values are
still accepted for backwards-compatibility, but are mapped
internally to the new method of representing the option.
AST-105
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@146640 f38db490-d61c-443f-a65b-d21fe96a405b
call-id in the dialog-info event package used with extension state subscriptions
on Snom phones. Then, when the phone sends an INVITE with Replaces for the
special callid, Asterisk will perform a pickup on the extension that was
subscribed to.
The original code on this issue was submitted by xylome. However, contributions
have been made by (at least) mgernoth and pkempgen. The final patch was written
by seanbright, and includes the necessary logic to allow this work in a
technology independent way.
(closes issue #5014)
Reported by: xylome
Patches:
issue5014-trunk.diff uploaded by seanbright (license 71)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@145226 f38db490-d61c-443f-a65b-d21fe96a405b
This will print the subs and their status for every line (if any).
wedhorn did most of the work with his patch which introduced
'skinny show debug' but a discussion on IRC stated that it should be
added to 'skinny show lines'
Input on the output format by Qwell on IRC.
(closes issue #13344)
Reported by: wedhorn
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@140938 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: erousseau
This was a reasonable enhancement request, which was
easy to implement. Since it's an enhancement, it
could only be applied to trunk.
Basically, for accounting where "initiated" seconds
are billed for, if the microseconds field on the end
time is greater than the microseconds field for the
answer time, add one second to the billsec field.
The implementation was requested by erousseau, and
I've implemented it as requested. I've updated the
CHANGES, the cdr.conf.sample, and the .h files
accordingly, to accept and set a flag for the
corresponding new option. cdr.c adds in the extra
second based on the usec fields if the option is
set. Tested, seems to be working fine.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@140057 f38db490-d61c-443f-a65b-d21fe96a405b
This set of changes enhances IAX2 encryption support by adding key rotation
to provide enhanced security. The key used for encryption is rotated right
after the call gets set up, and then again every few minutes. This was
discussed at the last AstriDevCon. For interoperability with older versions
of Asterisk, there is an option that disables key rotation.
(closes issue #13018)
Reported by: bbryant
Patches:
07072008__iax2_key_rotation.diff uploaded by bbryant (license 36)
Tested by: russell, bbryant
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@135158 f38db490-d61c-443f-a65b-d21fe96a405b
driver into a common place for multiple channel drivers.
(closes issue #13152)
Reported by: caio1982
Patches:
atxfer_complete_sound3.diff uploaded by caio1982 (license 22)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@134401 f38db490-d61c-443f-a65b-d21fe96a405b
implementations. Asterisk has, for a long time,
had its own implementation of poll(2) which
just used the input arguments to call select(2).
In 1.4, this internal implementation was used
for Darwin systems. This was removed in Asterisk
trunk at some point, but it seems as though this
was not the right move to make.
On Mac OS X, it appears as though the poll used
to gather CLI input does not respond properly
when connecting via a remote Asterisk console.
Reverting to the use of Asterisk's poll fixed
the issue.
Also, there is now an option for the configure
script, --enable-internal-poll, which will allow
for anyone to use Asterisk's internal poll
implementation in case they suspect that their
system's poll implementation is buggy.
closes issue #11928)
Reported by: adriavidal
Patches:
1.6.0-configurev2.patch uploaded by putnopvut (license 60)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@134125 f38db490-d61c-443f-a65b-d21fe96a405b
fail to setup video RTP if the two endpoints will not support it. This assists
with call files and certain transfers to ensure that if two video phones are
ever connected, they will always share a video feed.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@130951 f38db490-d61c-443f-a65b-d21fe96a405b
acceptdtmf and enddtmf. These allow for the DTMF pressed to be configurable
instead of being hardcoded to '#' and '*'.
(AST-86)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@127558 f38db490-d61c-443f-a65b-d21fe96a405b
to how language is handled between two channels whose native
language is different. Prior to this patch, app_dial would have
the callee inherit the caller's language, and app_queue would not.
After this patch, app_dial no longer has the language inheritance
capability. This seems to make the most sense since it seems more
natural for a person to hear files played back in his/her native
language instead of the language of the person on the far end of
the call. See the CHANGES file for hints on how to keep the
previous behavior of app_dial if desired.
(closes issue #12489)
Reported by: bcnit
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@125647 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122127 | murf | 2008-06-12 08:51:44 -0600 (Thu, 12 Jun 2008) | 1 line
Arkadia tried to warn me, but the code added to ast_cdr_busy, _failed, and _noanswer was redundant. Didn't spot it until I was resolving conflicts in trunk. Ugh. Redundant code removed. It wasn't harmful. Just dumb.
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122128 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122046 | murf | 2008-06-12 07:47:34 -0600 (Thu, 12 Jun 2008) | 37 lines
(closes issue #10668)
Reported by: arkadia
Tested by: murf, arkadia
Options added to forkCDR() app and the CDR() func to
remove some roadblocks for CDR applications.
The "show application ForkCDR" output was upgraded
to more fully explain the inner workings of forkCDR.
The A option was added to forkCDR to force the
CDR system to NOT change the disposition on the
original CDR, after the fork. This involves
ast_cdr_answer, _busy, _failed, and so on.
The T option was added to forkCDR to force
obedience of the cdr LOCKED flag in the
ast_cdr_end, all the disposition changing
funcs (ast_cdr_answer, etc), and in the
ast_cdr_setvar func.
The CHANGES file was updated to explain ALL
the new options added to satisfy this bug report
(and some requests made verbally and via
email, irc, etc, over the past months/year)
The 's' option was added to the CDR() func,
to force it to skip LOCKED cdr's in the
chain.
Again, the new options should be totally transparent
to existing apps! Current behavior of CDR,
forkCDR, and the rest of the CDR system should
not change one little bit. Until you add the
new options, at least!
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122091 f38db490-d61c-443f-a65b-d21fe96a405b
This commit merges in the rest of the code needed to support distributed device
state. There are two main parts to this commit.
Core changes:
- The device state handling in the core has been updated to understand device
state across a cluster of Asterisk servers. Every time the state of a device
changes, it looks at all of the device states on each node, and determines the
aggregate device state. That resulting device state is what is provided to
modules in Asterisk that take actions based on the state of a device.
New module, res_ais:
- A module has been written to facilitate the communication of events between
nodes in a cluster of Asterisk servers. This module uses the SAForum AIS
(Service Availability Forum Application Interface Specification) CLM and EVT
services (Cluster Management and Event) to handle this task. This module
currently supports sharing Voicemail MWI (Message Waiting Indication) and
device state events between servers. It has been tested with openais, though
other implementations of the spec do exist.
For more information on testing distributed device state, see the following doc:
- doc/distributed_devstate.txt
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121559 f38db490-d61c-443f-a65b-d21fe96a405b
where the entered phone number is checked.
You can now define a set of extensions/exten patterns that describe
valid phone numbers. PrivacyManager will check that context for a match
with the given phone number.
This way you get better control. For example people blindly hitting
10 digits just to get past privacymanager
Example line in extensions.conf:
exten => incoming,n,PrivacyManager(3,10,,route-outgoing)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121197 f38db490-d61c-443f-a65b-d21fe96a405b
a dynamic realtime queue member is added to the queue, and the
REMOVEMEMBER event is logged when a dynamic realtime member is
removed. Since no calling channel is associated with these events
the string "REALTIME" is placed where the channel's unique id is
normally placed.
(closes issue #12774)
Reported by: atis
Patches:
queue_log_rt_members.patch uploaded by atis (license 242)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@120166 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118646 | file | 2008-05-28 11:23:34 -0300 (Wed, 28 May 2008) | 4 lines
Add an option to use the source IP address of RTP as the destination IP address of UDPTL when a specific option is enabled. If the remote side is properly configured (ports forwarded) then UDPTL will flow.
(closes issue #10417)
Reported by: cstadlmann
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@118647 f38db490-d61c-443f-a65b-d21fe96a405b
If a deadlock is detected, then the typical lock information will be
printed along with a backtrace of the stack for the offending threads.
Use of this requires compiling with DETECT_DEADLOCKS and having glibc
installed.
Furthermore, issuing the "core show locks" CLI command will print the
normal lock information as well as a backtraces for each lock. This
requires that DEBUG_THREADS is enabled and that glibc is installed.
All the backtrace features may be disabled by running the configure
script with --without-execinfo as an argument
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@118173 f38db490-d61c-443f-a65b-d21fe96a405b
If you give chanisavail a list of channels, it will only
return the first available channel.
When this option is set, it will return all the available
channels from the given list.
(closes issue #12248)
Reported by: dagmoller
Patches:
app_chanisavail-snv.patch-v2.txt uploaded by dagmoller (license 436)
- major changes by me because russellb pointed out some buffer overflows
and codeguideline issues.
Converted it all to the ast_str_* api
Tested by: dagmoller, mvanbaak
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@118101 f38db490-d61c-443f-a65b-d21fe96a405b
(closes issue #12705)
Reported by: ctooley
Patches:
new_externalivr_argument_format-v2.diff uploaded by ctooley (license 136)
new_externalivr_documentation.diff uploaded by ctooley (license 136)
and a few additional fixes by me
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117725 f38db490-d61c-443f-a65b-d21fe96a405b
'unknown', and better document the use of each parameter.
(closes issue #12633)
Reported by: tzafrir
Patches:
pridialplan_unknown_2.diff uploaded by tzafrir (license 46)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117182 f38db490-d61c-443f-a65b-d21fe96a405b
press DTMF digits to switch between spying modes. Pressing 4 activates spy mode,
pressing 5 activates whisper mode, and pressing 6 activates barge mode. Use of
this feature overrides the normal operation of DTMF numbers.
This feature is courtesy of Switchvox.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@116522 f38db490-d61c-443f-a65b-d21fe96a405b
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115588 f38db490-d61c-443f-a65b-d21fe96a405b
This commit adds some new features to the SMDI_MSG_RETRIEVE() dialplan function.
Previously, this function only allowed searching by the forwarding station.
I have added some options to allow you to also search for messages in the queue
by the message desk terminal ID, as well as the message desk number.
This originally came up as a suggestion on the asterisk-dev mailing list.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115021 f38db490-d61c-443f-a65b-d21fe96a405b
and denoising to a channel, AGC() and DENOISE(). Also included, is a change
to the audiohook API to add a new function (ast_audiohook_remove) that can
remove an audiohook from a channel before it is detached.
This code is based on a contribution from Switchvox.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114926 f38db490-d61c-443f-a65b-d21fe96a405b
to announce-position, "limit" and "more," as well as a new option,
announce-position-limit. For more information on the use of these options,
see CHANGES or configs/queues.conf.sample.
(closes issue #10991)
Reported by: slavon
Patches:
app_q.diff uploaded by slavon (license 288)
Tested by: slavon, putnopvut
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114906 f38db490-d61c-443f-a65b-d21fe96a405b
party to be spoken instead of the channel name or number.
This was accomplished by adding a new function pointer to point to a function in app_voicemail
which retrieves the name file and plays it. This makes for an easy way that applications may play
a user's name should it be necessary. app_directory, in particular, can be simplified greatly by
this change.
This change comes as a suggestion from Switchvox, which already has this feature. AST-23
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114813 f38db490-d61c-443f-a65b-d21fe96a405b
barge on the call. It is like the existing whisper option, except that
it allows the spy to talk to both sides of the conversation on which
he is spying.
This feature has existed in Switchvox, and this merges the functionality
into Asterisk.
(AST-32)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114678 f38db490-d61c-443f-a65b-d21fe96a405b
a custom client name. Using the channel name is still the default. This was done
at the request of Jared Smith.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114533 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: atis
Tested by: murf
This upgrade adds the ~~ (concatenation) string operator to expr2.
While not needed in normal runtime pbx operation, it is needed when
raw exprs are being syntax checked. This plays into future syntax-
unification plans. By permission of atis, this addition in trunk
and the reason of why things are as they are will suffice to close
this bug.
I also added a short note about the previous addition of "sip show sched"
to the CLI in CHANGES, which I discovered I forgot in a previous commit.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@114423 f38db490-d61c-443f-a65b-d21fe96a405b
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r110880 | kpfleming | 2008-03-26 09:42:35 -0700 (Wed, 26 Mar 2008) | 10 lines
Merged revisions 110869 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r110869 | kpfleming | 2008-03-26 08:53:46 -0700 (Wed, 26 Mar 2008) | 2 lines
due to licensing restrictions, we cannot distribute the source code for iLBC encoding and decoding... so remove it, and add instructions on how the user can obtain it themselves
........
................
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@110881 f38db490-d61c-443f-a65b-d21fe96a405b
allow the list of periodic announcments specified to be played in a random
order instead of being played sequentially.
(closes issue #6681)
Reported by: alt_phil
Tested by: putnopvut
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@109621 f38db490-d61c-443f-a65b-d21fe96a405b
(closes issue #9503)
Reported by: tzafrir
Patches:
fix_cleanups uploaded by tzafrir (license 46)
zapata_sections uploaded by tzafrir (license 46)
skipchannel_options uploaded by tzafrir (license 46)
conf_sample uploaded by tzafrir (license 46)
patches updated by me to better conform to coding guidelines and fix some problems
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@108286 f38db490-d61c-443f-a65b-d21fe96a405b
a variable from an Asterisk configuration file in the dialplan, or anywhere
else where dialplan functions can be used.
(Inspired by a discussion with Tilghman and Pari)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@107787 f38db490-d61c-443f-a65b-d21fe96a405b
an attended transfer over AMI
(closes issue #10585)
Reported by: ornati
Patches:
atxfer-trunk-r90428.diff uploaded by ornati (license 210)
(with modifications from me)
Tested by: putnopvut
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@106236 f38db490-d61c-443f-a65b-d21fe96a405b
do some additional code cleanup and improvement in passing.
(closes issue #12106)
Reported by: nizon
Patches:
devstate-patch.txt uploaded by nizon (license 415)
-- Updated to trunk, and tab completion added by me
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@105461 f38db490-d61c-443f-a65b-d21fe96a405b
changes are backward-compatible, so no changes to UPGRADE.txt are
necessary.
(closes issue #9279)
Reported by: rottenroddy
Patches:
20080125__bug9279.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@104101 f38db490-d61c-443f-a65b-d21fe96a405b
(closes issue #11553)
Reported by: johan
Patches:
UPGRADE.txt.channelredirect.patch uploaded by johan (license 334)
CHANGES.channelredirect.patch uploaded by johan (license 334)
app_channelredirect-20080219.patch uploaded by johan (license 334)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@103819 f38db490-d61c-443f-a65b-d21fe96a405b
Added ability to retrieve list of categories in a config file.
Added ability to retrieve the content of a particular category.
Added ability to empty a context.
Created new action to create a new file.
Updated delete action to allow deletion by line number with respect to category.
Added new action insert to add new variable to category at specified line.
Updated action newcat to allow new category to be inserted in file above another existing category.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@103331 f38db490-d61c-443f-a65b-d21fe96a405b
This set of changes introduces TCP and TLS support for chan_sip. There are various
new options in configs/sip.conf.sample that are used to enable these features. Also,
there is a document, doc/siptls.txt that describes some things in more detail.
This code was implemented by Brett Bryant and James Golovich. It was reviewed
by Joshua Colp and myself. A number of other people participated in the testing
of this code, but since it was done outside of the bug tracker, I do not have their
names. If you were one of them, thanks a lot for the help!
(closes issue #4903, but with completely different code that what exists there.)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@99085 f38db490-d61c-443f-a65b-d21fe96a405b
immediately at startup. Any commands in the startup_commands file in the Asterisk
config diretory will get executed.
(closes issue #11781)
Reported by: jamesgolovich
Patches:
asterisk-startupcmds.diff.txt uploaded by jamesgolovich (license 176)
-- With some changes by me.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@98986 f38db490-d61c-443f-a65b-d21fe96a405b
Add a new module, app_jack, which provides interfaces to JACK, the Jack
Audio Connection Kit (http://www.jackaudio.org/). Two interfaces are
provided; there is a JACK() application, and a JACK_HOOK() function. Both
interfaces create an input and output JACK port. The application makes
these ports the endpoint of the call. The audio coming from the channel
goes out the output port and whatever comes back in on the input port is
what gets sent to the channel. The JACK_HOOK() function turns on a JACK
audiohook on the channel. This lets you run the audio coming from a
channel through JACK, and whatever comes back in is what gets forwarded
on as the channel's audio. This is very useful for building custom
vocoders or doing recording or analysis of the channel's audio in another
application.
In case anyone is curious, the platform that inspired me to write this is
PureData (http://puredata.info/). I wrote these JACK interfaces so that I
could use Pd to do interesting things with the audio of phone calls ...
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@98628 f38db490-d61c-443f-a65b-d21fe96a405b
to set the qualify frequency.
(closes issue #11597)
Reported by: wilder
Patches:
qualifyfreq5.patch uploaded by wilder (license 362)
-- with some mods by me
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@98027 f38db490-d61c-443f-a65b-d21fe96a405b
1) Add the Dialplan class, for NewExten and VarSet events, which should cut
down on the volume of traffic in the Call class.
2) Permit some commands to be run from multiple classes, such as allowing
DBGet to be run from either the System or the Reporting class.
3) Heavily document each class in the sample config, as there were several
that made no sense to be in the write= line, and two that made no sense to be
in the read= line (since they controlled no permissions there).
(Closes issue #10386)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@97651 f38db490-d61c-443f-a65b-d21fe96a405b
based on configuration templates that use Asterisk dialplan function and
variable substitution. It should be possible to create phone profiles and
templates that work for the majority of phones provisioned over http. It
is currently only intended to provision a single user account per phone.
An example profile and set of templates for Polycom phones is provided.
NOTE: Polycom firmware is not included, but should be placed in
AST_DATA_DIR/phoneprov/configs to match up with the included templates.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@97634 f38db490-d61c-443f-a65b-d21fe96a405b
will monitor this second device's state for the member, even though it actually calls the first
interface. This ability has been added for statically defined queue members, realtime queue members,
and dynamic queue members added through the CLI, dialplan, or manager.
(closes issue #11603, reported by acidv)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@97203 f38db490-d61c-443f-a65b-d21fe96a405b
This commit imports libresample for use in Asterisk. It also adds a new codec
module, codec_resample. This module uses libresample to re-sample signed linear
audio between 8 kHz and 16 kHz.
It also provides an alternative for converting between 16 kHz G.722 and 8 kHz
signed linear when using G.722, which will likely be useful as some people have
complained about volume issues when the current codec_g722 converts to 8 kHz
signed linear. But, to test this, you will have to disable the g722-to-slin and
g722-to-slin16 translators in codec_g722.c.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@95501 f38db490-d61c-443f-a65b-d21fe96a405b
Add a new console channel driver, chan_console, which is a console channel
driver that uses portaudio as a cross platform audio interface. It was written
to provide a console channel driver that works with Mac CoreAudio, but it
supports a number of other audio interfaces, as well, including OSS and ALSA.
It could one day be the single console channel driver, but does not yet have
as many features as chan_oss.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@95412 f38db490-d61c-443f-a65b-d21fe96a405b
The channel name is printed in verbose messages
maximumWordLength option added.
Duration of words that do not meet the minimum word duration will be logged
The duration of pre-greeting silence will be logged
Only consider us in the greeting if we actually detected a valid word duration.
(closes issue #11650, reported and patched by davevg)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@95167 f38db490-d61c-443f-a65b-d21fe96a405b
the existence of a dialplan target.
(closes issue #11579)
Reported by: irroot
Patches:
func_dialplan2.c uploaded by irroot (license 52)
-- Additional changes by me.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@94799 f38db490-d61c-443f-a65b-d21fe96a405b
(closes issue #11625, reported and patched by sergee)
Thank you very much to sergee for adding this new feature!
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@94782 f38db490-d61c-443f-a65b-d21fe96a405b
by adding an exclamation mark to the dial string.
This patch also exists for 1.4 in the fixtoheader-1.4 branch
and has been in production for quite some time.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@93897 f38db490-d61c-443f-a65b-d21fe96a405b
you need to reload after changes. Thanks YS.
Reported by: ys
Patches:
trunk93163_manager_reload.c.diff uploaded by ys (license 281)
(related to issue #11414)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@93166 f38db490-d61c-443f-a65b-d21fe96a405b
manager realtime implementation.
If you change accounts in manager.conf, you now need to reload to activate the
changes (deletions, additions). This was not the case with 1.4.
Reported by: ys
Patches:
trunk93163_manager_reload.c.diff uploaded by ys (license 281)
(closes issue #11414)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@93165 f38db490-d61c-443f-a65b-d21fe96a405b
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@93163 f38db490-d61c-443f-a65b-d21fe96a405b
Thanks, eliel, for writing the original patch. Modified by me to follow
other manager events and the new "moremanager" style.
(closes issue #11478)
Reported by: eliel
Patches:
manager.c.patch uploaded by eliel (license 64)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@91347 f38db490-d61c-443f-a65b-d21fe96a405b
This introduces two new options for zapata.conf: mwimonitor and mwimonitornotify.
The mwimonitor option enables MWI monitoring. When the MWI state on a line changes,
then the script specified by mwimonitornotify will be executed for custom handling
of the state change, similar to the externnotify option of voicemail.conf.
Also, when the MWI state on an FXO line changes, an internal Asterisk event is
generated to indicate the new state of the associated mailbox. That may, any
module that cares about MWI information will get notified and can handle it
just as if app_voicemail had sent this notification.
(BE-253, original patch from markster, with some minor modifications by me to
add comments, documentation, and internal event support)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@90949 f38db490-d61c-443f-a65b-d21fe96a405b
1. When moh is started, we search first in memory to find the class. If we do not
find it in memory, we search realtime instead.
2. When moh is restarted (as in, it had been started on this particular channel, stopped,
and now we're starting it again), if using the "files" mode, then realtime will always
be rechecked. If you are using other modes, however, we will simply reattach to the external
running process which was playing moh earlier in the call. This is a necessary compromise so that
we don't end up with too many background processes.
3. musiconhold.conf has a general section now. It has one option: cachertclasses. If set to yes,
then moh classes found in realtime will be added to the in-memory list. This has the advantage
of not requiring database lookups each time moh is started, but it has the disadvantage of not
truly being realtime.
I have tested this for functionality, and it passes. I also tested this under valgrind and there
are no memory problems reported under typical use.
Special thanks to Sergee for implementing this feature and enduring my complaints on the bugtracker!
(closes issue #11196, reported and patched by sergee)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89946 f38db490-d61c-443f-a65b-d21fe96a405b
- Restructure other changes to UPGRADE.txt and CHANGES
We're still looking for scripts that replace
asterisk -rx "show shannels concise"
by using the manager interface, but still produces the same output.
Anyone?
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89606 f38db490-d61c-443f-a65b-d21fe96a405b
and we now have the groupcount system to implement call-limits in the dialplan. You
can use the "setvar" option in realtime/sip.conf to set limits per device.
- Implement "callcounter" as a new option to enable the call counting we need to
report device status to queue, manager and SIP subscriptions.
The call counter setting is now enabled in the code by setting the device call-limit
to 999. When we remove the call limit, we can simply enable this with a boolean
setting.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89554 f38db490-d61c-443f-a65b-d21fe96a405b
* Added the ability to specify the music on hold class used to play into the
conference when there is only one member and the M option is used.
* Added the ability to specify a music on hold class to play instead of ringing
for the SLATrunk application.
(patched by me, and tested internally)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89470 f38db490-d61c-443f-a65b-d21fe96a405b
with the SIPPEER() argument of the same name. The deprecation procedure is not
being used here since this is a trunk-only option.
(closes issue #11307, reported by pj, patched by me)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89441 f38db490-d61c-443f-a65b-d21fe96a405b
parked extension is provided as an argument.
(closes issue #10803)
Reported by: outtolunc
Patches:
res_features-parkedcall-any.diff4 uploaded by outtolunc (license 237)
- modified by me to work a bit differently ...
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89250 f38db490-d61c-443f-a65b-d21fe96a405b
This extends the concise capabilities of this CLI command to include
listing all conferences, instead of an addition to the other sub commands
for the "meetme" command.
(closes issue #11078)
Reported by: jthomas
Patches:
meetme-concise.patch uploaded by jthomas (license 293)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89073 f38db490-d61c-443f-a65b-d21fe96a405b
much identical to the S() and L() options to Dial(). They let you set
timeouts for the conference, as well as have warning sounds played to
let the caller know how much time is left, and when it is running out.
(closes issue #8030)
Reported by: areski
Patches:
meetme_timeout_timelimit_v2.patch uploaded by areski (license 29)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89069 f38db490-d61c-443f-a65b-d21fe96a405b
This introduces a new channel driver, chan_unistim, that supports the Unistim
VoIP protocol for Nortel phones. The following models have been confirmed
to work: i2002, i2004 and i2050.
(closes issue #8864)
Reported by: c_hans
Patches:
chan_unistim.patch uploaded by c (license 304)
ustm_no_conf.diff uploaded by junky (license 177)
Tested by: c_hans, dbowerman, math, junky, loloski
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@88368 f38db490-d61c-443f-a65b-d21fe96a405b
It allows you to configure a prefix for auto-monitor recordings.
(closes issue #6353)
Reported by: ivanfm
Patches:
asterisk_automon_v4.patch uploaded by ivanfm (original patch)
- updated patch:
6353-touch_monitor_prefix.diff uploaded by qwell (license 4)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@85682 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: junky
Patches:
register_trying.diff.txt uploaded by jcmoore
Disable sending 100 Trying on REGISTER attempts and make it an option. This has been signed off by oej.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@82257 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: jmls
Patches:
pbx.diff uploaded by jmls (license 141)
Add REASON dialplan variable for when an originated call fails and the failed extension is executed.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@81372 f38db490-d61c-443f-a65b-d21fe96a405b
Reported by: nic_bellamy
Patches:
2006-10-03_svn_44249_voicemail_lockmode_v3.patch uploaded by nic_bellamy (license 213)
Add support for configurable file locking methods. The default is "lockfile",
which is the old behavior. There is an additional option, "flock", which is
intended for use in situations where the lockfile method will not work, such as
with SMB/CIFS mounts.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@81233 f38db490-d61c-443f-a65b-d21fe96a405b
