Change the default for the pridialplan parameter to the far more common case of
'unknown', and better document the use of each parameter. (closes issue #12633) Reported by: tzafrir Patches: pridialplan_unknown_2.diff uploaded by tzafrir (license 46) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@117182 f38db490-d61c-443f-a65b-d21fe96a405b
This commit is contained in:
parent
49884f46f0
commit
9f97a44436
1
CHANGES
1
CHANGES
|
@ -19,6 +19,7 @@ Zaptel channel driver (chan_zap) Changes
|
|||
----------------------------------------
|
||||
* Channels can now be configured using named sections in zapata.conf, just
|
||||
like other channel drivers, including the use of templates.
|
||||
* The default for pridialplan has changed from 'national' to 'unknown'.
|
||||
|
||||
PBX Changes
|
||||
-----------
|
||||
|
|
|
@ -750,7 +750,7 @@ static struct zt_chan_conf zt_chan_conf_default(void) {
|
|||
.pri = {
|
||||
.nsf = PRI_NSF_NONE,
|
||||
.switchtype = PRI_SWITCH_NI2,
|
||||
.dialplan = PRI_NATIONAL_ISDN + 1,
|
||||
.dialplan = PRI_UNKNOWN + 1,
|
||||
.localdialplan = PRI_NATIONAL_ISDN + 1,
|
||||
.nodetype = PRI_CPE,
|
||||
|
||||
|
|
|
@ -79,10 +79,20 @@
|
|||
;
|
||||
;nsf=none
|
||||
;
|
||||
; PRI Dialplan: Only RARELY used for PRI.
|
||||
; PRI Dialplan: The ISDN-level Type Of Number (TON) or numbering plan, used for
|
||||
; the dialed number. For most installations, leaving this as 'unknown' (the
|
||||
; default) works in the most cases. In some very unusual circumstances, you
|
||||
; may need to set this to 'dynamic' or 'redundant'. Note that if you set one
|
||||
; of the others, you will be unable to dial another class of numbers. For
|
||||
; example, if you set 'national', you will be unable to dial local or
|
||||
; international numbers.
|
||||
;
|
||||
; PRI Local Dialplan: Only RARELY used for PRI (sets the calling number's
|
||||
; numbering plan)
|
||||
; pridialplan and prilocaldialplan cannot be changed on a reload.
|
||||
; numbering plan). In North America, the typical use is sending the 10 digit
|
||||
; callerID number and setting the prilocaldialplan to 'national' (the default).
|
||||
; Only VERY rarely will you need to change this.
|
||||
;
|
||||
; Neither pridialplan nor prilocaldialplan can be changed on reload.
|
||||
;
|
||||
; unknown: Unknown
|
||||
; private: Private ISDN
|
||||
|
@ -93,7 +103,7 @@
|
|||
; redundant: Same as dynamic, except that the underlying number is not
|
||||
; changed (not common)
|
||||
;
|
||||
;pridialplan=national
|
||||
;pridialplan=unknown
|
||||
;prilocaldialplan=national
|
||||
;
|
||||
; pridialplan may be also set at dialtime, by prefixing the dialled number with
|
||||
|
|
Reference in New Issue