Andreas Eversberg
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
Andreas Eversberg
5e14471eb6
B-Netz: Fixup of metering pulse
2017-10-22 19:23:17 +02:00
Andreas Eversberg
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
Andreas Eversberg
f7a0e4622b
Display channel offset with TX and RX channel frequencies on startup
2017-10-22 19:23:06 +02:00
Andreas Eversberg
ba036de226
Add function to display measurements on screen
...
Use 'm' key to toggle display.
2017-10-12 19:46:30 +02:00
Andreas Eversberg
ee61c4362b
B-Netz: Use standard deviation to determine if an FSK frame is valid or not
2017-08-16 18:51:45 +02:00
Andreas Eversberg
41bd9999b1
B-Netz: Add metering pulse support (Gebuehrenimpuls)
2017-08-16 18:51:44 +02:00
Andreas Eversberg
534411d660
New common FSK implementation, replaces all individual implementations
2017-08-09 17:27:13 +02:00
Andreas Eversberg
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
Andreas Eversberg
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
Andreas Eversberg
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
Andreas Eversberg
fc3b3e07be
Finetuning LOSS (noise) detection
...
The algorithm is still bad, but works in most cases
2017-05-24 14:00:08 +02:00
Andreas Eversberg
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
Andreas Eversberg
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
Andreas Eversberg
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
Andreas Eversberg
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
Andreas Eversberg
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
Andreas Eversberg
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
Andreas Eversberg
286c11cab4
B-Netz: Add translation of emergency numbers 110 and 112
2017-01-02 17:38:54 +01:00
Andreas Eversberg
7585f9c22d
Add function to change dsp state, more debug with channel info
2016-12-09 16:34:33 +01:00
Andreas Eversberg
f111c50478
A-Netz / B-Netz: Add function to change state, debug with channel info
...
Change state uses a function rather than directly setting state
variable.
Some debug commands now use channel number. (for multi-trx setups)
2016-12-06 17:47:58 +01:00
Andreas Eversberg
938fb74bae
B-Netz: Fixes call procedure according to the standard FTZ 171 R 4
2016-11-27 22:06:47 +01:00
Andreas Eversberg
b1c452cf12
Changed command line options
...
* All lower case options define common options
* All upper case options define network specific options
2016-11-27 22:06:47 +01:00
Andreas Eversberg
34954b50de
B-Netz: Rename special start digit for coin box phone type
2016-11-13 06:39:14 +01:00
Andreas Eversberg
ea32ab3fa3
B-Netz: Move 'telegramm' generation to seperate telegramm.c/h files
2016-10-31 18:21:26 +01:00
Andreas Eversberg
27938d111e
Added and fixed extra compiler warnings
2016-10-07 08:55:18 +02:00
Andreas Eversberg
b205cfcf03
B-Netz: Work on pilot signal generation
...
The pilot signal to switch to channel 19 can be:
* a tone
* a tone that is turned off (notone)
* positive amplitude
* negative amplitude
2016-10-03 14:56:15 +02:00
Andreas Eversberg
8d7c7f4425
callref: Move callref from 'sender' to individual implementation of a, b, c-netz
...
Cellular networks use transaction instances, so callref is now member of
transaction object.
2016-10-02 09:06:03 +02:00
Andreas Eversberg
038ce9d1b7
Add info key 'i' to show some states.
...
Currently showing C-Netz attached subscribers
2016-08-03 12:03:49 +02:00
Andreas Eversberg
4745b29115
NMT: Caller ID support
2016-07-24 12:31:07 +02:00
Andreas Eversberg
5bbbe11666
B-Netz: Rework on dialing start digit: New unknown type added
2016-07-24 12:31:06 +02:00
Andreas Eversberg
3ef9ef88bd
B-Netz: Compiler switch to generate a dial sequence (for testing)
2016-07-24 12:30:56 +02:00
Andreas Eversberg
ab9aba1a84
B-Netz: Reply the station ID correctly
...
It must be replied right after it has been received the first time.
It does not matter if this happens a bit later, even a second later.
Thanx to Hans Wigger for providing recording from his B-Netz tester to
figure this out.
2016-07-06 16:19:01 +02:00
Andreas Eversberg
997f8eda43
B-Netz: Add timer for switching back from calling channel
...
The timer ensures that the paging sequence is sent out by sound card before
switching back to traffic channel
2016-05-29 17:17:49 +02:00
Andreas Eversberg
bae12156a2
common code: Add input gain option
2016-05-08 15:49:45 +02:00
Andreas Eversberg
7434e21dc2
Multi transceiver support
...
This can be multiple transceivers on multiple sound cards.
Two transceivers can be bundled on one sound device as well, using both channels.
2016-05-08 15:48:13 +02:00
Andreas Eversberg
38692e430b
B-Netz: Calibration of tone levels on TX and RX side
2016-05-08 08:11:17 +02:00
Andreas Eversberg
11487eefe8
B-Netz: Minor fixes on signals
2016-05-08 08:11:02 +02:00
Andreas Eversberg
b73894ac49
B-Netz / NMT: minor changes at signal detection
2016-05-06 07:05:40 +02:00
Andreas Eversberg
16acdbf59d
Implementation of C-Netz (German mobile telephone system)
2016-04-24 15:19:00 +02:00
Andreas Eversberg
4356c93afa
common: Add pre and de emphasis, if the radio does not support it
...
Connect to the oscillator of the transmitter - good girl!
You need to enable pre emphasis in this case.
Connect to the discriminator of the receiver - good boy!
You need to enable de emphasis in this case.
2016-04-24 15:14:56 +02:00
Andreas Eversberg
9de121109d
common code: Sample rate conversion now supports any rate above 8000 Hz
2016-04-17 16:49:39 +02:00
Andreas Eversberg
1146537d84
common code: Add feature to record received audio and replay it
...
-W <file.wav> writes a wave file of received audio
-R <file.wav> reads a wave file to feed into decoder
This way you can record a phone and later debug without a phone
and radio equipment.
2016-03-27 17:56:04 +02:00
Andreas Eversberg
3bee5e728a
bnetz: Allow calling the phone using '05' prefix
2016-03-13 09:12:43 +01:00
Andreas Eversberg
287b914b56
bnetz: Simplifying 'telegramm' handling
2016-03-13 09:12:19 +01:00
Andreas Eversberg
9b8e359264
anetz/bnetz: Remove redundant code to enter idle state
2016-03-13 09:12:14 +01:00
Andreas Eversberg
946c9ce10a
initial git import
2016-03-13 09:12:11 +01:00