bsc_stat_reject is treating -1 as parsing failure but for the
global barring. Change it to another return value so it is
not counted as parsing failure.
We had issues with odd behavior on the nanoBTS which lead
to the introduction of the "broken" state. On busy multi
BTS cells (e.g. rhizomatica) with wifi backhaul the timeout
we set to wait for a RF Channe Release ACK is sometimes too
little and channels are marked broken that look to be okay
(besides the still to be determined delay).
In case of a sysmoBTS we now know that we can change the
state of a broken channel back to normal in case we do
receive the right response.
Manually verified using the Smalltalk BTS code
PackageLoader fileInPackage: 'FakeBTS'
bts := FakeBTS.BTS new.
bts btsId: '1903/0/0'.
bts connect: 'localhost'.
bts waitForBTSReady.
test := FakeBTS.OpenBSCTest new.
test bts: bts.
test requireAnyChannel
... wait for NITB output
<0004> abis_rsl.c:223 (bts=0,trx=0,ts=0,ss=0) Timeout during deactivation! Marked as broken.
... process pending messages
stdin next
<0004> abis_rsl.c:735 (bts=0,trx=0,ts=0,ss=0) CHAN REL ACK for broken channel. Releasing it.
So the channel went from broken to unallocated.
Change the paging strategy based on on if a LAC override
is in place or not. In case we had changed the LAC we need
to page on all the BTS. Change the "grace" handling to
iterate over the BTS and filter out all non matching ones
LAC in case no LAC handling is active.
Manually verified all four cases with a single BTS:
* No LAC handling and grace period
* LAC handling and grace period
* No LAC handling and not lock
* LAC handling and lock.
Related: SYS#1398
For MT we can't page per lac as we don't know which BTS was
the original one. Split the grace period and normal mode into
two methods so we can bloat both of them later.
We need to use different LAC/CI towards the core network.
It is a bit problematic as LAC/CI is a per BTS attribute
so this feature only works if a BSC manages everything in
the same LAC.
Related: SYS#1398
The write_queue is designed to have a maximum amount of pending
messages and will refuse to take new messages when it has been
reached. The caller can decide if it wants to flush the queue
and add the message again, create a log. But in all cases the
ownership of the msgb has not been transferred. Fix the potential
memory leak in the failure situation.
When reading from RTP socket, the first read() may fail right after
connecting to remote socket. Subsequent read() will work as it should.
If the remote socket does not open fast enough, the transmitted RTP
payload can cause an ICMP (connection refused) packet reply. This causes
the read to fail with errno=111. In all other error cases, the errno is
logged at debug level. In all error cases, reading is not disabled.
Conflicts:
openbsc/src/libtrau/rtp_proxy.c
[hfreyther: Fix typo, stop reading in all cases but ECONNREFUSED]
If a bad TRAU frame is received, it is forwarded to MNCC application
as GSM_BAD_FRAME. The application can now handle the GAP of missing
audio. (e.g. by extrapolation)
If TRAU frames are forwarded via RTP, bad frames are dropped, but frame
counter and timestamp of RTP sender state is incremented.
Conflicts:
openbsc/src/libtrau/rtp_proxy.c
[hfreyther: Merge without testcase, fix typo]
In case:
* No message_payload and a 0 sm_length was used
* esm_class indicates UDH being present
* 7bit encoding was requested
The code would execute:
ud_len = *sms_msg + 1;
Which is a NULL pointer dereference and would lead
to a crash of the NITB. Enforce the limits of the
sm_length parameter and reject the messae otherwise.
Fixes: Coverity CID 1042373
I used strdup in case the data would not be valid from after
the call to getopt and this creates a potential leak if a user
is specifying multiple configuration files. If I depend on the
fact that the string is a pointer into the argv[] array I can
kill the strdup and fix the unlikely leak.
Fixes: Coverity CID 1206578
We are deferencing conn earlier in this function without doing
a null check. At the time deliver_to_esme is called the conn
will always exist and even the lchan is likely to be present.
Remove the null check for conn right now.
Fixes: Coverity CID 1210594
For most configurations we don't address multiple GGSNs but
only want to enforce a list of APNs. In the future we might
add a special global GGSN context but not right now.
Fixes: SYS#593
This reverts commit f81cacc681.
Since the PURGE MS retry mechanism had been removed, this feature
is not used anymore. It just makes the code more complex.
Conflicts:
openbsc/include/openbsc/gprs_sgsn.h
openbsc/src/gprs/gprs_subscriber.c
openbsc/tests/sgsn/sgsn_test.c
Currently the APN IE in the Activate PDP Contex Request and the PDP
data that is stored with the subscriber is ignored completely.
This commit adds the sgsn_mm_ctx_find_ggsn_ctx that checks the APN IE
against the subscriber's PDP data entries if both are present. If
there is no match, the request is rejected.
If an APN IE has not been included but PDP data entries are present,
the function checks all of these entries against the static 'apn'
configuration to find a suitable entry.
If an APN has not been determined so far and any APN is allowed, the
configuration is checked with an empty APN string, to allow for
default configurations based on the IMSI prefix only.
If nothing of this succeeded but the request wasn't rejected either,
and there is no 'apn' configuration at all or if any APN is allowed
but a default configuration ist not present, the GGSN with id 0 is
used (if present).
Otherwise the request is rejected ('missing APN').
Ticket: OW#1334
Sponsored-by: On-Waves ehf
This commit adds the exported functions apn_ctx_find_alloc,
apn_ctx_free, apn_ctx_by_name, and apn_ctx_match to manage and
retrieve APN to GGSN mappings.
The following VTY commands are added to 'config-sgsn':
- apn APN ggsn <0-255>
- apn APN imsi-prefix PREFIX ggsn <0-255>
which maps an APN gateway string to an SGSN id. The SGSN must be
configured in advance. When matching an APN string, entries with a
leading '*' are used for suffix matching, otherwise an exact match is
done. When a prefix is given, it is matched against the IMSI. If
several entries match, a longer matching IMSI prefix has precedence.
If there are several matching entries with the same PREFIX, the entry
with longest matching APN is returned.
Ticket: OW#1334
Sponsored-by: On-Waves ehf
Currently the PDP info that is transmitted via GSUP is just parsed
and then discarded.
This commit adds a new data structure sgsn_subscriber_pdp_data and
maintains a list of those in sgsn_subscriber_data. The PDP data is
copied from an incoming GSUP UpdateLocationResult message. If that
message contains the PDPInfoComplete flag, the list is cleared before
new entries are added. The 'show subscriber cache' output now also
shows the PDP data entries.
Note that the InsertSubscriberData message is still not supported.
[hfreyther: Added talloc_free in gprs_subscr_pdp_data_clear]
Sponsored-by: On-Waves ehf
Keep track if the power level has been "fixed" by the BSC,
otherwise keep track of the currently ordered one. The ms_power
is the initial value set by the BSC and continues to be used.
Create a control command to read and modify the gprs mode. Use
the get_string_value to indicate if the value was found or not.
This is useful for the ctrl interface where I didn't want to
replicate "none", "gprs" and "egprs". Share code to verify that
a BTS supports the mode.
Related: SYS#591
30f1f37638 introduced new channel
combinations but had a copy and paste error in the description.
The jenkins system didn't run the external tests so this issue
and others were not noticed until now.
Fix the copy and paste and update the test result.
Currently the MM context is not deleted when a GSUP location
cancellation message is processed, because the real
sgsn_update_subscriber_data function has been wrapped to a dummy
implementation.
This commit adds an explicit call to sgsn_mm_ctx_cleanup_free which
also unassigns the LLME, so the call to gprs_llgmm_assign is removed.
It also adds an assertion to check that there are no talloc'ed blocks
left in tall_bsc_ctx.
Addresses:
== 372 bytes in 1 blocks are possibly lost in loss record 7 of 9
== at 0x402A17C: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
== by 0x4059FB8: _talloc_zero (talloc.c:354)
== by 0x8055B82: sgsn_mm_ctx_alloc (gprs_sgsn.c:167)
== by 0x804A336: alloc_mm_ctx (sgsn_test.c:140)
== by 0x804B24D: test_subscriber_gsup (sgsn_test.c:503)
== by 0x804EC99: main (sgsn_test.c:1853)
Sponsored-by: On-Waves ehf
This commit adds a check after a GSUP message has been decoded
whether it is an error message and does not contain a cause value.
If his is the case, the cause value is set to 'Network failure', so
that this cause if effectively the default value for error messages.
Sponsored-by: On-Waves ehf
Currently there are not any test cases for PurgeMS GSUP messages in
test_subscriber_gsup.
This commit adds tests for incoming PurgeMSResult and -Error
messages.
Sponsored-by: On-Waves ehf
Currently gprs_subscr_rx_gsup_message returns immediately after it
detects that an IMSI has not been given in the received GSUP message.
While this is ok for responses (result or error), a request should
always be answered.
This commit adds code to reply with a corresponding error message
("Invalid mandatory information") when it receives a request without
an IMSI.
Note that the generated error message will not contain an IMSI either.
Sponsored-by: On-Waves ehf
The cancellation type that is part of the UpdateCancellation message
is currently ignored.
This patch adds the missing glue between the existing GSUP and GMM
support. If the type is not present or has the value updateProcedure
the subcriber and MM context are siliently removed. Otherwise, a
message with cause 'implicitly detached' is sent to the MS. Since the
real cause is not known (the specification neither added a cause IE
nor defined a static cause value), the MS may get the real cause in
the following AttachRej.
Added VTY commands:
- update-subscriber imsi IMSI cancel update-procedure
- update-subscriber imsi IMSI cancel subscription-withdraw
the old form without the cause is no longer supported.
Sponsored-by: On-Waves ehf
Currently the subscr entry is no longer present, when PURGE MS
ERROR/RESULT arrives. In this case, an unspecific notice is logged
('unknown IMSI'). This clutters up the logfile with notices even in
perfectly normal operation.
This commit changes the code path that is used when a subscr cannot
be found for an incoming GSUP message. A check for PURGE MS RESULT
and ERROR is added and gprs_subscr_handle_gsup_purge_no_subscr is
called for these messages instead of gprs_subscr_handle_unknown_imsi.
Sponsored-by: On-Waves ehf
Currently the keep_in_ram flag is explicitely reset in
gprs_subscr_cleanup to cover the case, that the VTY 'create'
sub-command has been used to create the subscriber entry.
This commit completely removes keep_in_ram handling from
gprs_subscriber.c and adds a VTY 'destroy' sub-command to reset the
flag and remove the entry. So 'create' and 'destroy' can be used to
manager sticky entries that are kept even when a location
cancellation is done.
Added VTY command:
- update-subscriber imsi IMSI destroy
Sponsored-by: On-Waves ehf
Currently the MM context cleanup code is distributed over several
functions. sgsn_mm_ctx_free not only frees data structure but also
eventually stops the timer and does the subscriber clean-up.
mm_ctx_cleanup_free (gprs_gmm.c) cleans up the PDP contexts and
unassign the TLLI.
This commit moves the cleanup code from both functions into a new
unifying function sgsn_mm_ctx_cleanup_free that cares about the
clean-up of all related sub-systems.
Sponsored-by: On-Waves ehf
Currently, sgsn_update_subscriber_data can be called with mmctx ==
NULL and will find and associate the right context (if present) based
on the subscriber's IMSI. This will not happen in regular use
any more, since sgsn_update_subscriber_data will only be called when
subscribers are used (auth mode 'remote') and in this case
gprs_subscr_get_or_create_by_mmctx will already be called by
sgsn_auth_request. Therefore, MM context and subscriber are always
associated except for some test cases and experimental VTY usage.
The current implementation of sgsn_update_subscriber_data also causes
additional complexity for the deletion on MM contexts to avoid a
ipossible double-free MM contexts.
This commit removes the MM context <-> subscriber association code
from sgsn_update_subscriber_data. That function must always be called
with mmctx != NULL, now. To avoid problems with VTY and test usage,
the calling subscriber function now only call
sgsn_update_subscriber_data when mmctx != NULL, since the purpose of
that function is to update that state of an existing MM context after
subscriber data has been changed.
Sponsored-by: On-Waves ehf
The definition of subscr_put in gb_proxy_main.c will break linking if
symbols from libcommon are used. Since subscr_put is in libcommon,
there is no need for this dummy definition anymore.
This patch removes the dummy definition.
Adresses:
../../src/libcommon/libcommon.a(gsm_subscriber_base.o): In function `subscr_put':
/home/jerlbeck/git/build/openbsc/openbsc/src/libcommon/gsm_subscriber_base.c:90: multiple definition of `subscr_put'
gb_proxy_main.o:/home/jerlbeck/git/build/openbsc/openbsc/src/gprs/gb_proxy_main.c:56: first defined here
Sponsored-by: On-Waves ehf
Currently the sgsn_mm_ctx_free contains code to reset the mm->subscr
field that is also present in gprs_subscr_cleanup, which is called
directly afterwards.
This commit modifies the code path, so that the cleanup is done by
the gprs_subscr_cleanup function. The additional reference counter
increment is needed, since mm->subscr->mm->subscr (which is the same
like mm->subscr) will be reset (and unref'd) within
gprs_subscr_cleanup. Because the local variable subscr in
sgsn_mm_ctx_free is an additional pointer to the subscriber object,
it is consequent to adjust the reference counter when the assignment
is done.
Sponsored-by: On-Waves ehf
Holger Hans Peter Freyther