Fix some typos, correct data compression command, add example to turn
off compression.
Change-Id: I6beff8c66eacf12f1081d51dd6b124bdd4478558
Related: OS#1720
Listen on 127.0.0.100 by default, so there is no conflict on
127.0.0.1:23000. This allows starting both services with their default
configuration, like we are doing it in the Osmocom-Debian-install-*
jenkins jobs.
Related: OS#3369
Change-Id: I6e3053de8885a7954296d820c6a069d06276e4df
Quite a few features that are listed as not-implemented in the overview
section are actually implemented now.
Change-Id: I8d499a25293b69babc2aebb2d697438f8ba8141f
Related: OS#1720
osmo-sgsn was missing the help text of the -V option
gb_proxy still thought of itself as OpenBSC
Omit the name of the program in the help text to avoid such issues in
the future.
Related: OS#1720
Change-Id: Ib57694b6bff7c98a269dc4b4dbb7173349a57b81
Change bind-to-sgsns from 127.0.0.1 to 127.0.0.10, so osmo-gtphub's
default config does not conflict with the osmo-sgsn default config. The
value of bind-to-ggsns does not clash with osmo-ggsn's config, so it was
left unchanged.
Related: OS#3369
Change-Id: Id892e1f4ab2daabbe9824b819b5fed985373b97a
There is unfortunately no way to suppres this witha pragma,
and gcc 9 uncovers quite a few new instaces with enabled LTO that can't/won't be fixed
"error: potential null pointer dereference"
Related: OS#4123
Change-Id: I4d1219bf84d3b8dcaf925a60cf54abe733fba263
GCC 9 complains that variable 'gsm_cause' in do_act_pdp_req() may
be uninitialized. This may happen if sgsn_mm_ctx_find_ggsn_ctx()
would return NULL due to no static GGSN configured.
Change-Id: I09c608045dd35b9898b82e236a306ab9a6c2c0b9
Previous commit introduced command "authentication (optional|required)",
which is only meaningful if auth-policy is remote. Upon adding the cmd,
it changed the default logic for remote policy to not require
authentication, which broke TTCN3 tests because sgsn no longer tries to
authenticate the users.
Since it's actually good to enable authentication by default where
possible, let's enable it by default when on auth-policy remote.
In order to do so, let's simply not care about the value of variable
require_authentication if auth_policy is not REMOTE. As a result, we
drop parts of the previous patch and remove unneeded checks (which are
only partially useful based on order of commands during VTY read).
Fixes: 794f446a28
Change-Id: Ic707a95af178b44f08809df3d3bc8354bf34273c
It may be useful to have 'remote' authorization policy, but do not
require authentication in GERAN at the same time, e.g. in combination
with 'subscriber-create-on-demand' feature of OsmoHLR.
This change introduces a new VTY parameter similar to the one
that we already have in OsmoMSC:
authentication (optional|required)
Please note that 'required' only applies if 'auth-policy' is 'remote'.
Change-Id: I9909145e7e0af587c28827e16301a61b13eedaa9
Commit 176a4d2f33 moved echo timer related
code to its own function but did some mistakes when moving the logic
from several places into its own function. As a result, echo timer was
only enabled after the 2nd pdp ctx was created, instead of the expected
1st.
First, let's be consistent and always call the function *after* changing
state, since that's what the function expects. This fixes the issue.
Finally make the logic in the function more intuitive by checking in the
if clause the only case where actually the echo timer should be enabled:
Only if policy specifies so and we have at least 1 pdp ctx against that ggsn.
Fixes: 176a4d2f33
Change-Id: I826030978edb61ea5a172c2b72f63758206a6246
In I73fd54ad3a4ab8be5aff0fee5c722597ad766e9d incorrect fix was added
which only initialize first element of array. Fix this by using explicit
index to initialize entire array.
Change-Id: I26e4aa44f159d1b5b91dda4a586fd4e809711245
Look at PDP Context Status IE: if there are any PDP contexts which are
ACTIVE on MS side and there are no PDP contexts which are ACTIVE on the
network side, then send Service Reject with the cause "NO PDP
ACTIVATED". This forces MS to reactivate the PDP contexts.
3GPP TS 24.008 Section 4.7.13.4 Service request procedure not accepted
by the network. Cause # 40.
Fixes: OS#3937
Change-Id: If610cbef17c25ec44e65d4f1b2340d102c560437
After Activate PDP Context request, Motorola KRZR
sends a zero length XID-Field of Type L3 Parameters
If this is not echoed back, the phone will send
Deactivate PDP Context request with SM Cause:
LLC or SNDCP failure(A/Gb only) (25)
Closes: OS#3426
Change-Id: Ibd75f7b943c84ed7264481fa2e4bc3cb2f6745d4
gprs_sndcp_dcomp_term asserts if compclass is not
SNDCP_XID_DATA_COMPRESSION, so this way by checking in the caller too we
easily now if the unexpected value is in compclass or in algo.dcomp.
Change-Id: I4600e6a137f42f20fdf69637e4a9048b265c1748
When the patching and routing features were introduced, a lot of the
new structures were not documented at the same level as the pre-existing
code. Let's fix that.
Change-Id: I61bdd3b1cec037bce825c234a8a274b70629adc8
For every logical session between a MS and the SGSN, there is one LLME
(LLC Management Entity) and a set of LLEs (Logical Link Entities): One
for each SAPI.
The XID procedure used to establish LLC configuration values such as
N201 (MTU) parameters happens on each LLE separately. The negotiated
parameters only affect that one LLE (SAPI) and are not global.
Still, the OsmoSGSN LLC code has the "struct llist_head *xid" member as
part of the gprs_llc_llme, and not as part of the gprs_llc_lle. This
list is a cache of the XID fields we have sent with the last XID
request, which is used in processing the response from the MS.
If two XID handshakes were to occur concurrently on two LLEs, the state
between them would get messed up. It must be maintained separately for
each LLE.
Closes: OS#3955
Change-Id: Iaeb54ca5ac58391be45e56c2e721f531969f3a9e
According to Section 6.4.1.4 of 3GPP TS 04.64
The DM unnumbered response shall be used by an LLE to report to
its peer that the LLE is in a state such that ABM operation
cannot be performed. An LLE shall transmit a DM response to any
valid command received that it cannot action.
Closes: OS#3953
Change-Id: Ie8b8e16d5a68f19f21dc4fdb5703c8a794e0173c
A MS sending LLC NULL frames on cell change is a perfectly normal event,
and we shouldn't log any cryptic NOTICE messages about it.
Change-Id: I6be0b9c8813dfb40a7955422fd8e7cebf94d189c
In reality, only UI, I, SABM, UA and XID frames carry payload. All
other frames will have llhp.data == NULL.
Let's therefore not do any msgb adjustments unless we actually know
there is a user payload field.
Change-Id: I51bbd0f2c618d477a037af343ff41de1c8a5a3ae
Closes: OS#3952
A security command is part of multiple procedures to ensure
integrity (optional also encryption) between MS and RNC.
It should be used for all Iu connections once.
With the rewrite of the GMM Attach FSM the use of the security command
procedure was broken for all procedures e.g. Service Request except GMM
Attach Request.
Relates: OS#3920
Change-Id: I50e8e316f06ae1a6171a6b07e4e2f0761322b779
UE expects to receive Iu-ReleaseCommand after Attach Complete. If it
doesn't receive it, then it sends Iu-ReleaseRequest after a timeout
which makes the "PS Activation" process long.
Change-Id: Ib5053e3cd655d08ff3fd0fefa48325fabb1797c8
Related: OS#3908
gprs_ns_rcvmsg() in old libosmocore returns "number of bytes transmitted
by any response PDU we sent as a result of the received message", while
modern libosmocore simply retunrs '0' for any successfully received
message. Let's make sure any non-negative responses lead to a
reproducible test output with both old and new libosmocore.
Change-Id: I7a48d14aed19825b87a02ccf9ee9cbfe0853342c
This fixes following error:
DMM gprs_gmm.c:1126
GMM_ATTACH_REQ_FSM(gb_gmm_req)[0x5589e78dded0]{WaitAttachComplete}:
Event VLR answered not permitted
There seems to be a race condition in FSM when MS establishes MM context
which isn't immediately followed up by PDP context (for example when no
APN is configured in MS).
This does not affect actual functionality because in this case MS won't
be able to use GPRS anyway but it's still nice to get our FSM fixed even
in this corner case.
Change-Id: I14d234632224e20faf865d2273c83cfff31abf61
* don't use spaces when printing hex data like RAND, SRES etc to
increase the chance that it'll fit onto single line which will improve
readability
* don't print non-existent QoS value
Change-Id: I0a09063f30c1116803994117f49df9d02bcc9181
Add a 'gsup ipa-name' VTY command which overrides the default
IPA name used by the SGSN on the GSUP link towards the HLR.
This is required for GSUP routing in multi-SGSN networks.
The 'gsup ipa-name' option can only be set via the config file
because changing the IPA name at run-time conflicts with active
GSUP connections and routes configured in the HLR. The osmo-sgsn
program must be restarted if its IPA name needs to change.
Related: OS#3356
Change-Id: Ib2f65fed9f56b9718e8a9647e3f01dce69870c1f
We were passing a NULL pointer of type struct gsm_network * to
ctrl_interface_setup_dynip(). Remove the pointless declaration
of this struct. Also, replace the sgsn_controlif_setup() helper
function with a direct call to ctrl_interface_setup_dynip().
The helper fnuction was just a thin wrapper around the latter.
Change-Id: Ib4151afa5bff01e63b462cca517fb60ac0503759
Related: OS#3356
Use OSMO_MIN macro to check for MSISDN length. This makes the code
cleaner and will, hopefully, aid static analysis tools.
Change-Id: Ic0fbeb8d248c74e54bfb51ba2cdea55c4f386ac7
Fixes: CID57879
We do not install any libraries so we don't need it: most likely it's a
forgotten leftover from pre-split repo time.
Change-Id: Ifabb26d1e6384659789061bc2abe23cb5ceca4cb
This requires I414e67a3de733fab407161b3264d3b89070ba537 in libosmocore
to avoid warning about discarded const.
Change-Id: Ie92637dd900b0f9eba891d5aad0b4ba0ee69c08c
Add new environment variables WITH_MANUALS and PUBLISH to control if
the manuals should be built and uploaded. Describe all environment vars
on top of the file.
When WITH_MANUALS is set, install osmo-gsm-manuals like any other
dependency and add --enable-manuals to the configure flags (for "make"
and "make distcheck"). Add the bin subdir of the installed files to
PATH, so osmo-gsm-manuals-check-depends can be used by ./configure.
Related: OS#3385
Change-Id: Ic45322c809f9f65d0fd24b828dab0cd929fa6267
Set AM_DISTCHECK_CONFIGURE_FLAGS in Makefile.am instead of
DISTCHECK_CONFIGURE_FLAGS. This is the recommended way from the
automake manual, as otherwise the flag can't be changed by the user
anymore.
Related: OS#3718
Change-Id: I5bf96adcf06f1844ffc888d8690d2cc0df48e3f9
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I0477d7c871413bd90b365d3064bac3cba23a0883
Daniel Willmann
Oliver Smith
Eric Wild
Vadim Yanitskiy
Pau Espin
Keith Whyte
Harald Welte