This patch adds a test case test_2_consecutive_dl_tbfs which
expects a current bug with TS allocation for 2nd DL TBF.
The test's expectation is corrected along with the bug fix in a
subsequent commit
Related: OS#1792
Change-Id: I890e4fbb2b64037e051433e70082a197e2a929a6
Currently there is no persistent state being used in
alloc_algorithm_dynamic. So algorithm B is even used in persistent
high usage scenarios. If there are many active TBFs, multislot
assigments are not fair, because MS of a "higher" multislot class get
higher troughputs. On the other hand, as long as all PDCH are busy no
bandwidth will be wasted even if all MS use algorithm A.
This commit modifies alloc_algorithm_dynamic to disable algorithm B
when that call fails. It then keeps it disabled until there is a
single PDCH which is idle (it is considered idle, if there is at most
one active DL TBF assigned to it).
Sponsored-by: On-Waves ehf
Currently algorithm A can select an TBF even when there is no free
TBF in the reverse direction. While this does not necessarily lead to
an allocation failure, the probabily is higher. In addition, the
current slot reservations are not taken into account.
This commit changes the selection algorithm to prefer slots where TFI
are available in both directions and which are less reserved.
Sponsored-by: On-Waves ehf
The idea behind this meta algorithm is to automatically select one of
the other algorithms based on the system state. Basically algorithm B
will be selected if the PDCH usage is low to improve throughput and
latency. Algorithm A will be selected to support more concurrent MS.
This commit adds a first simple state-less version of this algorithm
that always tries B first and only if that fails A is tried
afterwards.
The following VTY command is added to the 'pcu' node:
- alloc-algorithm dynamic
Ticket: #1934
Sponsored-by: On-Waves ehf
MS iniated TCP connections generally result in a sequence
of short time UL and longer lasting DL TBFs, being interleaved
between several MS. This scenario is not covered by the existing
tests.
This commit adds a test, that allocates as man as possible TBFs
several times with different test modes without clearing the BTS (and
thus the TBF list) in between. The number of allocated DL TBFs in
each round is expected to be constant.
Sponsored-by: On-Waves ehf
Currently the TFI are managed per TRX, thus only a maximum of 32 TBF
per direction and per TRX are possible simultaneously.
This commit modifies algorithm_a() to allow the sharing of TFI
between different PDCH. Since algorithm A only assigns a single slot
to each TBF, the TFI of each PDCH can be assigned independently.
This increases the maximum to 32 TBF per direction and per PDCH
concerning the TFI allocation.
Ticket: #1793
Sponsored-by: On-Waves ehf
Currently the handling of MS_B and MS_C is not compliant with TS
45.002, annex B.1. These values may only interpreted as 0, if
frequency hopping is not enabled and if there is no change from Rx to
Tx or vice-versa.
This commit sets Ttb/Trb to 1 if the table entry is MS_B/MS_C, since
only combined down/up access modes are supported.
Sponsored-by: On-Waves ehf
Currently the masks are computed equally for each class type. This
does not make much sense for class type 2 MS, since those are capable
to work in full duplex mode.
This commit sets the masks to 0xff for class type 2 MS.
Sponsored-by: On-Waves ehf
According to TS 45.002, 6.4.2.2 the choice whether Tta or Tra has to
be applied, depends on the medium access mode (currently always
dynamic) and the number of UL/DL slots. Currently either value can be
used which might result in combinations not covered by the spec.
This commit changes find_multi_slots() to skip non-compliant
combinations.
Note that this code will have to be extended, if other medium
access modes are implemented.
Sponsored-by: On-Waves ehf
Currently the slot selection of algorithm A is based on the current
slot usage by active TBF. Especially in the Dl after UL case which
reflects the commen use case "MS initiates TCP connection", the
resulting distribution is not optimal with respect to PDCH usage.
This commit changes the implementation to use the slot reservation
information instead.
Sponsored-by: On-Waves ehf
Currently when using the test modes TEST_MODE_DL_AFTER_UL or
TEST_MODE_UL_AFTER_DL, the first TBF is deleted before the second is
allocated. The far more interesting case were to keep the first TBF a
little bit longer until the second TBF has been created and delete
then. This comes closer the the situation observed with real MS,
where the first TBF takes some time (timeout or waiting for Ack)
before it gets deleted and thus detached from the MS object.
This commit delays the call to tbf_free accordingly.
The effect can be observed in the results of the algo A tests, where
the uniform distribution of the allocated PDCH is lost.
Sponsored-by: On-Waves ehf
Currently the search of the "best" slot combination is done
separately from the UL slot selection, which can lead to an
allocation failure due to USF exhaustion even if another combination
had been possible.
This commit reduces the probability for this event by skipping UL
slots without free USF while calculation the capacity.
Note that the implementation is rather inefficient which will be
fixed by the following commits.
Sponsored-by: On-Waves ehf
Since currently the algorithm B will only allocate a single UL slot
and will have to stick to it (first common TS), the other possible UL
slots will not be allocated while the reservation is kept.
This commit adds code to update the reserved set of UL slots to only
reserve the single common TS when the UL TBF is allocated.
Interestingly this leads to fewer allocated TBF in some cases due to
USF exhaustion. This will be improved by the following commit "alloc:
Skip common TS without free USF".
Sponsored-by: On-Waves ehf
Currently al possible UL slots are included in the capacity
calculation which is the base of the slot selection. Nevertheless
UL-only slots will never be used, since only one uplink slot (which
must be a common slot) will be used.
This patch changes the code to only include common slots in the
capacity sum.
Note that this might not be optimal if algorithm B supported
multiple uplink slots.
Sponsored-by: On-Waves ehf
The current implementation always starts the downlink slot allocation
with the first possible slot, depending on which channels are enabled
and which multislot class is offered by the MS. So in configurations
with many (>4) PDCH, some PDCH are not really used.
The new implementation introduced by this commit differs as follows:
- The reservation mechanism provided by GprsMs is used to avoid
incompatibilities is used in the same way like algo A does. This
basically means, that the allocation is done once when the first
TBF is requested and then used until all TBF have been released.
- All combinations of Rx and Tx slots are checked for compatibility
with the multiscot class. Basically the combination with the most
usable PDCH and the least number of reservations is used.
- Only one UL slots is provided.
- Tta and Tra are checked.
Sponsored-by: On-Waves ehf
Currently only the first enabled PDCH will be used. Beside the
throughput this will also limit the number of TBFs:
- number of UL TBFs <= 7
- number of DL TBFs <= 32
This commit changes the allocation algorithm to use the PDCH with the
least number of attached TBFs. This will improve the troughput in
both directions and the UL limits:
- number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs
Ticket: #1794
Sponsored-by: On-Waves ehf
This commit adds:
- an assertion to check that count is valid,
- an assertion the verify that tbf_alloc did not fail
- a slots parameter to specify the enabled slots
- additional test invocations with more slots enabled
Sponsored-by: On-Waves ehf
This test allocates as many as possible UL/DL TBF pairs, shows their
PDCH usage, and checks how many of them has been created
successfully.
Sponsored-by: On-Waves ehf
The allocation in the TBF/BTS code is quite complex. In parts this
is due the assignment and requests occuring under differen circumstances.
Attempt to re-create the commono scenarios.
Remove the bogus msclass check in gprs_rlcmac_tbf::update as the
allocation code will check the ms class anyway.
Aravind Sirsikar