This patch doesn't really tests whether osmo-pcu can work on a multi-bts
environment, but it prepares the data structures to be able to do so at
any later point in time.
Change-Id: I6b10913f46c19d438c4e250a436a7446694b725a
There's no BTS single global object anymore, get rid of those APIs. Move
users to use "pcu->bts", which will evolve to a linked list in the
future.
Change-Id: I9cf762b0d3cb9e2cc3582727e07fa82c8e183ec5
Previous work on BTS class started to get stuff out of the C++ struct
into a C struct (BTS -> struct gprs_glcmac_bts) so that some parts of
it were accessible from C code. Doing so, however, ended up being messy
too, since all code needs to be switching from one object to another,
which actually refer to the same logical component.
Let's instead rejoin the structures and make sure the struct is
accessible and usable from both C and C++ code by rewriting all methods
to be C compatible and converting 3 allocated suboject as pointers.
This way BTS can internally still use those C++ objects while providing
a clean APi to both C and C++ code.
Change-Id: I7d12c896c5ded659ca9d3bff4cf3a3fc857db9dd
Both values (optionally) set (forced) by VTY and the values received
from PCUIF were stored in the same variable, meaning that for instance
the PCUIF values wouldn't really be used if someone applied eg "no cs"
during runtime.
This commit does something similar to what was already done for the
max_(m)cs fields. We store PCUIF values in one place and VTY ones in
another place, and then trigger a bts object internal process to find
out exactly which initial CS should it be using.
Change-Id: I80a6ba401f9c0c85bdf6e0cc99a9d2008d31e1b0
Currently the BTS object (and gprs_rlcmac_bts struct) are used to hold
both PCU global fields and BTS specific fields, all mangled together.
The BTS is even accessed in lots of places by means of a singleton.
This patch introduces a new struct gprs_pcu object aimed at holding all
global state, and several fields are already moved from BTS to it. The
new object can be accessed as global variable "the_pcu", reusing and
including an already exisitng "the_pcu" global variable only used for
bssgp related purposes so far.
This is only a first step towards having a complete split global pcu and
BTS, some fields are still kept in BTS and will be moved over follow-up
smaller patches in the future (since this patch is already quite big).
So far, the code still only supports one BTS, which can be accessed
using the_pcu->bts. In the future that field will be replaced with a
list, and the BTS singletons will be removed.
The cur_fn output changes in TbfTest are actually a side effect fix,
since the singleton main_bts() now points internally to the_pcu->bts,
hence the same we allocate and assign in the test. Beforehand, "the_bts"
was allocated in the stack while main_bts() still returned an unrelated
singleton BTS object instance.
Related: OS#4935
Change-Id: I88e3c6471b80245ce3798223f1a61190f14aa840
As we integrate osmo-pcu more and more with libosmocore features, it
becomes really hard to use them since libosmocore relies heavily on C
specific compilation features, which are not available in old C++
compilers (such as designated initializers for complex types in FSMs).
GprsMs is right now a quite simple object since initial design of
osmo-pcu made it optional and most of the logic was placed and stored
duplicated in TBF objects. However, that's changing as we introduce more
features, with the GprsMS class getting more weight. Hence, let's move
it now to be a C struct in order to be able to easily use libosmocore
features there, such as FSMs.
Some helper classes which GprsMs uses are also mostly move to C since
they are mostly structs with methods, so there's no point in having
duplicated APIs for C++ and C for such simple cases.
For some more complex classes, like (ul_,dl_)tbf, C API bindings are
added where needed so that GprsMs can use functionalitites from that
class. Most of those APIs can be kept afterwards and drop the C++ ones
since they provide no benefit in general.
Change-Id: I0b50e3367aaad9dcada76da97b438e452c8b230c
NS2 introduce a ns dialect to differentiate
between the 4 possible dialects.
Related: OS#4472, OS#4890
Depends: libosmocore.git Ia118bb6f994845d84db09de7a94856f5ca573404
Change-Id: I16dc82c38eb75c2b9d1197640a955fec7df84efc
In previous status, if USF for GPRS-only MS was selected, then EGPRS
TBFs were skipped and either a GPRS TBF was selected or a Dummy Block
was sent. That means the behavior was unfair towards EGPRS TBFs, because
sometimes they were skipped in favor of GPRS ones.
This patch imporves the situation in the above mentioned USF scenario, by
first, under specific conditions, allowing selection of an EGPRS TBF and
then forcing it to transmit in EGPRS-GMSK (MCS1-4) so that the
USF-targeted MS can still decode the USF, while at the same time
providing more fairness by allowing the EGPRS TBF to transmit data.
The specific conditions mentioned above are, mainly, related to the fact
that once a DL data block has been sent, and hence a BSN was assigned to
it, it cannot be retransmitted later using another MCS, since lower
MCS1-4 wouldn't be able to contain higher MCS RLC payload.
The set of conditions could be expanded in the future by also selecting
the EGPRS TBF if retransmition is required and the block to be
retransmitted was originally transmitted as MCS1-4.
Related: OS#4544
Change-Id: I9af23e175435fe9ae7b0e4119ad52fcd4707b9ca
The assumption that TLLI 0x00000000 is invalid and can be used
as the initializer is wrong. Similar to TMSI, 0x00000000 is a
perfectly valid value, while 0xffffffff is reserved - use it.
According to 3GPP TS 23.003, section 2.4, a TMSI/P-TMSI with
all 32 bits equal to 1 is special and shall not be allocated by
the network. The reason is that it must be stored on the SIM,
where 'ff'O represents the erased state. According to section
2.6 of the same document, a local/foreign TLLI is derived from
P-TMSI, so the same rule applies to TLLI.
I manually checked and corrected all occurances of 'tlli' in the
code. The test expectations have been adjusted with this command:
$ find tests/ -name "*.err" | xargs sed -i "s/0x00000000/0xffffffff/g"
so there should be no behavior change. The only exception is
the 'TypesTest', where TLLI 0xffffffff is being encoded and
expected in the hexdump, so I regenerated the test output.
Change-Id: Ie89fab75ecc1d8b5e238d3ff214ea7ac830b68b5
Related: OS#4844
Properly clip initial_(m)cs values to be lower-equal than maximum
configured.
Regarding initial_mcs, use values provided by BTS, which were not used
before.
Change-Id: Ifc6bc7c2734d1ae404adc2497afec5366e4f9e50
BTS simply notifies the PCU about the supported MCS, and PCU is
responsible for providing correct data formatting supported for the BTS
and the target MS.
Related: OS#4544
Change-Id: Ifcf23771bd23afc64ca6fea38948f98f2d134ecb
Take into account the MCS values supported by the BTS. In osmo-bts,
in general all MCS are enabled if "mode egprs" is selected in BSC,
and none otherwise.
Change-Id: Ie8f0215ba17da1e545e98bec9325c02f1e8efaea
The code in gprs_nsvc_create_and_connect() stores NSEI there for
no reason, despite it's already stored in struct gprs_ns2_nse.
Change-Id: Ib30152a12384cf0448104a1ee1cfb949f4a27553
In get_paging_mi(), before this, an encoded buffer of Mobile Identity bytes is
returned. Code paths following this repeatedly decode the Mobile Identity
bytes, e.g. for logging. Also, in get_paging_mi(), since the TMSI is read in
from a different encoding than a typical Mobile Identity IE, the TMSI was
manually encoded into a typical Mobile Identity IE. This is essentially a code
dup of osmo_mobile_identity_encode(). Stop this madness.
Instead, in get_paging_mi(), return a decoded struct osmo_mobile_identity. Code
paths after this use the struct osmo_mobile_identity directly without repeated
decoding.
At the point of finally needing an encoded Mobile Identity IE (in
Encoding::write_paging_request()), do a proper osmo_mobile_identity_encode().
Since this may return errors, add an rc check for the caller of
write_paging_request(), gprs_rlcmac_paging_request().
A side effect is stricter validation of the Mobile Identity passing through the
Paging code path. Before, invalid MI might have passed through unnoticed.
Change-Id: Iad845acb0096b75dc453105c9c16b2252879b4ca
This patch is a set of tightly related changes:
- group all RACH.ind parameters into struct 'rach_ind_params';
- group Channel Request parameters into struct 'chan_req_params';
- get rid of egprs_mslot_class_from_ra(), priority_from_ra(),
and is_single_block(), introduce unified parse_rach_ind();
- improve logging, get rid of redundant information.
This is needed for proper EGPRS Packet Channel Request handling.
Change-Id: I5fe7e0f51bf5c9eac073935cc4f4edd667c67c6e
Related: OS#1548
We have same kind of object splitted into two layers, in coding_scheme
and gprs_coding_scheme. Let's merge them together and get rid of the
class, which is not really useful because it's only a set of functions
operating on one enum value.
This change also fixes gcc 10.1.0 error about memseting a complex type
in rlc.h init().
Change-Id: Ie9ce2144ba9e8dbba9704d4e0000a2929e3e41df
It's super annoying seeing lots of functions being called everywhere
only to find out they are only incrementing a counter. Let's drop all
those functions and increment the counter so people looking at code
doesn't see dozens of code paths evyerwhere.
Most of the commit was generated by following sh snippet:
"""
#!/bin/bash
define_pattern="^CREATE_COUNT_ADD_INLINE"
generic_func="do_rate_ctr_add"
grep -r -l "${define_pattern}" . | xargs cat | grep "${define_pattern}("| tr -d ",;" | tr "()" " " | awk '{ print $2 " " $3 }' >/tmp/hello
while read -r func_name ctr_name
do
#echo "$func_name -> $ctr_name";
files="$(grep -r -l "${func_name}(" .)"
for f in $files; do
echo "$f: $func_name -> $ctr_name";
sed -i "s#${func_name}(#${generic_func}(${ctr_name}, #g" $f
done;
done < /tmp/hello
grep -r -l "void ${generic_func}" | xargs sed -i "/void ${generic_func}(CTR/d"
grep -r -l "$define_pattern" | xargs sed -i "/$define_pattern/d"
"""
Change-Id: I966221d6f9fb9bb4f6068bf45ca2978008a0efed
It's super annoying seeing lots of functions being called everywhere
only to find out they are only incrementing a counter. Let's drop all
those functions and increment the counter so people looking at code
doesn't see dozens of code paths evyerwhere.
Most of the commit was generated by following sh snippet:
"""
#!/bin/bash
grep -r -l ^CREATE_COUNT_INLINE . | xargs cat | grep "^CREATE_COUNT_INLINE("| tr -d ",;" | tr "()" " " | awk '{ print $2 " " $3 }' >/tmp/hello
while read -r func_name ctr_name
do
#echo "$func_name -> $ctr_name"
files="$(grep -r -l "${func_name}()" .)"
for f in $files; do
echo "$f: $func_name -> $ctr_name";
sed -i "s#${func_name}()#do_rate_ctr_inc(${ctr_name})#g" $f
done;
done < /tmp/hello
grep -r -l "void do_rate_ctr_inc" | xargs sed -i "/void do_rate_ctr_inc(CTR/d"
grep -r -l "CREATE_COUNT_INLINE" | xargs sed -i "/^CREATE_COUNT_INLINE/d"
"""
Change-Id: I360e322a30edf639aefb3c0f0e4354d98c9035a3
Original file from wireshark.git (packet-gsm_csn1.c) is being built and
maintained as a C file. There's no real need for us to maintain it as a
C++, and doing so will make both files derive over time (as already
happened). Let's keep it as a C compiler (which btw seems to be more
strict) to make it easier to port patches back and forth wireshark.git.
Take the chance to move some declarations we added to csn1.h to be able
to build it out of wireshark. Let's keep those in a separate header file
to ease looking for differences.
Change-Id: I818a8ae947f002d35142f9f5473454cfd80e1830
It's not really needed to have those together in some function calls,
and makes it more difficult to follow the code. Furthermore, new callers
not having content already aligned (len+value) will be using these
functions in forthcoming commits.
Change-Id: Ifb9d3997bfb74b35366c3d1bc51ce458f19abf16
Some are used to control (M)CS values for downlink while some do it for
uplink. Let's make clear which one is used for what. Take the chance to
document the fields a bit better than they were.
Some more information about the origin of cs_downgrade_threshold can be
found in the commit introducing it: 70b96aa232.
Related: OS#4286
Change-Id: I4e890e924b094a1937fbd3794de96704cf0421a8
This commit would also remove the option from config_write_pcu() since
it's automatically filled in by osmo_tdef, but there was actually a bug
because that param was never printed when saving the config...
Change-Id: Id8e70b0f44ef2f7e20ecdb3fd8ca93ae2a05b9a3
Receive an Application Information Request from the BTS via PCU
interface. Construct a Packet Application Information message from it
(3GPP TS 44.060 11.2.47) and send it to all MS with active TBF.
The TTCN-3 test infrastructure to test this feature is not quite ready
yet, so I've added C unit tests instead.
Related: OS#4048
Change-Id: Ie35959f833f46bde5f2126314b6f96763f863b36
This will allow for configuration of some of the timers by the user,
and allow him to inspect current values being used.
It will be also useful for TTCN3 tests which may want to test some of
the timers without having to wait for lots of time.
Timers are splitted into 2 groups: BTS controlled ones and PCU controlled
ones. The BTS controlled ones are read-only by the user (hence no
"timer" VTY command is provided to change them).
TbfTest.err output changes due to timers being set up correctly as a
consequence of changes. Other application such as pcu_emu.cpp and
pcu_main.cpp had to previosuly set the initial values by hand (and did
so), but apparently TbfTest.c was missing that part, which is now fixed
for free.
Depends: libosmocore.git Id56a1226d724a374f04231df85fe5b49ffd2c43c
Change-Id: I5cfb9ef01706124be262d4536617b9edb4601dd5
Pau Espin
Pau Espin Pedrol
Vadim Yanitskiy
Oliver Smith