Currently an existing DL TBF can get lost in the process of
establishing an UL TBF via RACH. This can lead to stalled connections
until the network sends more LLC frames.
This commit adds a check for a non-empty LLC queue after the UL TBF
has been established to rcv_control_ack (GPRS_RLCMAC_UL_ASS_WAIT_ACK
path) to eventually establish a new DL TBF on the UL TBF's PACCH.
Sponsored-by: On-Waves ehf
Currently an existing DL TBF is freed immediately, when a resource
request is received. This makes sense since the MS might have dropped
it when switching to the PDCH signaled via the AGCH for the SBA. But
if the TBF still is assumed to exist on the MS side, there might be
TFI collisions if the old TBF object is not kept to block its TFI
for some time.
This commit changes rcv_resource_request to call release() instead of
tbf_free() on the DL TBF object (if it exists).
Sponsored-by: On-Waves ehf
Currently reuse_tbf (partly) resets the old DL TBF and uses its PACCH
to establish a new DL TBF. The method can not be used with UL TBFs.
This commit replaces the reuse_tbf method into a
gprs_rlcmac_dl_tbf:release method which triggers the TBF's timer
based deletion (so that the TFI is still reserved for some time) and
a gprs_rlcmac_tbf::establish_dl_tbf_on_pacch which can establish DL
TBFs on existing PACCHs of either DL or UL TBFs.
Sponsored-by: On-Waves ehf
Currently when a second MS object has been created for an MS, because
the TLLI was not known yet, the will be detected in
gprs_rlcmac_tbf::extract_tlli and the two objects will be merged by
update_ms. But when the dl_tbf is moved from the old to the new
(second) MS object, the old MS object can get idle and be removed
before the object are merged. This can cause LLC frame loss when the
MS object is deleted immediately after getting idle (no timeout
configured).
This commit adds a guard to keep the MS object until extract_tlli has
been executed.
Sponsored-by: On-Waves ehf
This reverts commit e91bd3babd.
That commit seems to cause hanging DL TBFs when there was a RACH
based UL TBF establishment while it that TBF is active. This could be
caused by the use of a different PDCH for the SBA.
Conflicts:
tests/tbf/TbfTest.cpp
tests/tbf/TbfTest.err
Currently all of these messages are discarded if they are assumend to
be caused by noise. But even in these cases, the FN and TN values
which are added by the DSP are valid. So these can be used to update
the current_frame value.
The osmo-bts sets the fBFILevel of a physical channel to -200dB if it
is used for PDTCH or PACCH which is the case for all PDCH. This way
a data_ind or ra_ind message is already send at least once per block
period (4 frames) per PDCH. These messages are passed to either
handle_ph_data_ind or handle_ph_ra_ind even if they contain garbage
data.
The ra_ind messages are sometimes sent a few frames earlier than
data_ind messages using the same frame.
This commit adds calls to update the current_frame value based on all
of these messages before they are discarded. The FN taken from ra_ind
are passed with an increased max_delay (5) to compensate for early
ra_ind messages.
Sponsored-by: On-Waves ehf
The FN of the data_ind taken from the DSP are monotonic, so latency
does not affect the detection of poll timeouts if these FN are used.
If the FN is larger than a poll_fn value, it can safely be assumed
that the poll response will not arrive later on.
Currently a max_delay of 60 frames is used, which has the drawback
that additional ~250ms will pass until a lost ACK is detected.
Using the data_ind's FN alone breaks the poll timeout detection if
there are no other MS sending data blocks.
This commit adds BTS::set_current_block_frame_number that is called
with the FN taken from data_ind messages. The max_delay is set to 0
which removes the additional delay, when this FN is used to detect
poll timeouts. So the average additional delay decreases with the
number of data_ind per time. The current_frame is updated unless it
seems to have been updated already (assumed if 0 < cur_fn - block_fn
< 500). Thus the time_ind has still priority to update the
current_frame value.
Sponsored-by: On-Waves ehf
This commit adds the relevant frame number to the "poll timeout"
logging message. In addition, logging is added to the places where
poll_fn gets set.
The goal is to track down the source for frequent "poll timeout"
messages.
Sponsored-by: On-Waves ehf
Currently when allocating tbf_alloc_ul_tbf or tbf_alloc_dl_tbf
objects, the allocated memory area is pre-initialised by talloc_zero
before the C++ constructors are called. This is not recognised by
Coverity, since there is no talloc model file yet. Thus Coverity
complains about missing initialisers.
On the other hand, it is still planned to convert the TBF classes
into real C++ ones. So instead of silencing Coverity directly, this
is an opportunity to do it the C++ way.
This commit adds initialisers and initialisation code for all
members that relied on talloc_zero. The corresponding calls to
talloc_zero are replaced by calls to talloc to give ASAN/valgrind
a chance to detect future initialisation errors. Some initialisation
code is also moved from setup_tbf to the constructors, notably the
initialisation of the bts pointer.
Fixes: Coverity CID 1320604, 1320605, 1320606
Sponsored-by: On-Waves ehf
Currently when calling GprsMs::attach_tbf and a TBF of the same
direction already exists, the old TBF gets detached from the MS
object.
Therefore that TBF object loses access to that MS object including
for instance TLLI and IMSI.
This leads to failing DL TBF reuses, since the downlink assigment
cannot be sent on the PACCH later on because that must be sent on the
old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved.
This commit fixes this bug by changing the GprsMs implementation to
keep a list of replaced (old) TBFs. TBFs are only removed when they
are being detached explicitely (see tbf_free and set_ms).
Addresses:
tbf.cpp:741 We have a schedule for downlink assignment at uplink
TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no
downlink TBF
Sponsored-by: On-Waves ehf
The missing const qualifier prevents the llist_empty() C++ wrapper
function from being compiled successfully when it is used.
Sponsored-by: On-Waves ehf
The TBF object are currently created by using talloc_zero/talloc_free
directly from plain functions. Therefore C++ constructors and destructors
are not called. So the only initialisation that is done is setting
every member to 0. Non POD members do not have their constructors
called either, which makes it impossible to use the current LListHead
class for real members when the LListHead::m_back member has to be set.
This commit changes the TBF allocation functions to call the
corresponding C++ constructor after the call to talloc_zero and to
register the C++ destructor with the talloc context, so that is is
called before talloc_free actually frees the memory.
With this change, non-POD members and custom
constructors/desctructors can be used with gprs_rlcmac_tbf,
gprs_rlcmac_dl_tbf, and gprs_rlcmac_ul_tbf.
Note that this change is only a single step of the plan to turn the
TBF classes into real C++ classes.
Sponsored-by: On-Waves ehf
This tests the usage of an existing TBF that is no longer in FLOW
state to request a new DL TBF via the old TBF's PACCH.
The test triggers a bug that breaks the association between both TBF
objects, resulting in packet loss and transmission stalling.
Sponsored-by: On-Waves ehf
Currently the assignment is completed by manipulating the state of
the TBF objects directly by setting the state fields to fixed values.
This way, the PCU's code that is responsible to update the state
accordingly is not tested.
This commit changes this to simulate RLC Control Acknowledgement
messages instead.
Sponsored-by: On-Waves ehf
This function basically request the generation of the next downlink
RLC block. Since this will no really send somthing to the PCU, the
current name can be misleading.
This commit just renames the function.
Sponsored-by: On-Waves ehf
The block number can always be deduced from the frame number. The
current test code handles the block number explicitely, which makes
the code more complex and has also led to block number errors cause
by not wrapping the numbers (valid block numbers range from 0 to 11).
This commit changes send_rlc_block to always compute the block number
based on the frame number. It also turns the block_nr into an
optionaly output-only parameter.
Sponsored-by: On-Waves ehf
The current implementation takes a lot of parameters (bts, trx_no,
...) that can also be taken from a TBF object.
This commit adds an alternative variant with just takes a TBF, the fn
(in/out), and the block number (in/out).
Sponsored-by: On-Waves ehf
Currently the pending LLC packets are lost in some cases when MS
objects are merged, for instance after a RACH when there were 2 MS
object for the same MS (they get merged, when the TLLI is known for
both objects).
This patch modifies GprsMs::merge_old_ms to move all pending LLC
packets (if there are any) to the current MS object.
Sponsored-by: On-Waves ehf
This methods takes all LLC frames from the old LLC queue and moves
them into the current. If both queues are ordered chronologically
(recv_time), the resulting queue is also ordered.
Sponsored-by: On-Waves ehf
Currently all active TBF of an MS are killed if a Packet Resource
Request is received from the MS. In general this happens after a RACH
request. This does not happen after a resource request that has been
included into a Downlink Ack/Nack.
Sometimes an UL TBF is requested by an MS via RACH while a DL TBF is
running for instance to send a TCP Ack. This can happen, if a former
request via PACCH did not work.
This commit removes the killing of the DL TBF from
gprs_rlcmac_pdch::rcv_resource_request().
Sponsored-by: On-Waves ehf
This adds tests for
- RA update with RACH for the RAUpdateComplete message
- RACH for UL while DL is active (LLC queue not empty)
Sponsored-by: On-Waves ehf
This commit fixes several issues:
- Set MS class in request
- Set IMSI in establish_ul_tbf_two_phase
- Fake assigment acknowledgement in establish_ul_tbf_two_phase
- Fix TFI bit offset to 1 (was 2)
Sponsored-by: On-Waves ehf
Currently the functions test_tbf_single_phase and test_tbf_two_phase
do the test logging, BTS intialisation, and the complete message
sequencing on their own. Therefore they cannot be used to test more
complex sequences like TBF reestablishment.
This commit moves the code that does the actual messaging into own
functions. The frame number handling is generalised which also fixes
a block number wrapping error on the way.
Sponsored-by: On-Waves ehf
Currently the merging of the meta information (MS class, IMSI) takes
place in gprs_rlcmac_tbf::merge_and_clear_ms(). This makes it
difficult to merge the internal state and does not directly relate to
TBFs anyway.
This commit moves this into a new method GprsMs::merge_old_ms.
Sponsored-by: On-Waves ehf
Currently there is not support for Network Service (NS) logging.
This commit adds the missing definitions and sets the default level
to INFO. Further configuration can now be done with the 'logging
level ns' VTY command.
Sponsored-by: On-Waves ehf
Currently if an MS retries to access the PCU by using RACH and if
there is already an entry for that MS, a duplicated MS object
referring to the same TLLI is created. This is caused by blindly
setting the TLLI without querying the MS storage to avoid
inconsitencies.
This leads to several entries in the MS storage that are assigned to
the same TLLI. If that happens, 'show ms all' can display multiple
entries with the same TLLI (note that an MS object can belong to
several TLLIs, so there might be an intersection that is not visible
in the list) or 'show tbf all' can show entries with MS_CLASS == 0 in
some cases.
This commit changes update_ms() to merge and clean up old entries
that belong to the given TLLI if they exist. Some data (like the MS
class) is copied to the new MS object.
Note that TBF belonging to the old MS object are deleted immediately
if they have not registered a timer.
Sponsored-by: On-Waves ehf
Currently when receiving a PACKET DL ACK/NACK message with the Final
Ack Indicator bit set, the TBF's state is set to
GPRS_RLCMAC_WAIT_RELEASE but T3193 is only started when the LLC queue is
empty. Otherwise the reuse_tbf() method is called to establish a new
DL TBF. In that case, the timer is not started. This will leave the
current TBF without a timer so it is potentially not released later
on.
This is recognisable by sticky entries in the output of the
'show tbf all' command and possibly allocation failures if there are
too many of them.
This commit changes the code to always start T3193 to make sure, that
a timer is always active when the the state is set to
GPRS_RLCMAC_WAIT_RELEASE.
Note that TS 44.060, 9.3.2.6 requests to release the 'old' TBF
immediately in some cases, which is not implemented by this change.
This will lead to a longer reservation period of the TFI only, which
is safer than reassigning it too early.
Sponsored-by: On-Waves ehf
This commit adds an implementation of the CoDel algorithm based on
the reference pseudocode presented in
http://queue.acm.org/appendices/codel.html. Instead of abstracting
the queue itself, the implementation provides a time stamp based
automaton which is invoked after a package has been dequeued.
Note that the modifications of the algorithm shown in
https://tools.ietf.org/html/draft-ietf-aqm-codel-01 are not yet
applied.
Sponsored-by: On-Waves ehf
Currently there is no persistent state being used in
alloc_algorithm_dynamic. So algorithm B is even used in persistent
high usage scenarios. If there are many active TBFs, multislot
assigments are not fair, because MS of a "higher" multislot class get
higher troughputs. On the other hand, as long as all PDCH are busy no
bandwidth will be wasted even if all MS use algorithm A.
This commit modifies alloc_algorithm_dynamic to disable algorithm B
when that call fails. It then keeps it disabled until there is a
single PDCH which is idle (it is considered idle, if there is at most
one active DL TBF assigned to it).
Sponsored-by: On-Waves ehf
Currently the value of trx_no2 is used in the assertion, even if the
call to tfi_find_free has failed.
This commit fixes the asserted expression to only compare the trx_no
values if the function call has succeeded.
Sponsored-by: On-Waves ehf
Currently if both an uplink and a downlink TBF are to be allocated by
alloc_tbfs() and the second allocation fails, the first TBF is not
freed.
This commit changes the recursive function to free the TBF if the ms
variable has been changed to NULL.
Sponsored-by: On-Waves ehf
Indicate those slots with lower case letters that do not have a spare
TFI for the other direction if such a TBF has not been attached to
the MS object yet.
Sponsored-by: On-Waves ehf
Currently algorithm A can select an TBF even when there is no free
TBF in the reverse direction. While this does not necessarily lead to
an allocation failure, the probabily is higher. In addition, the
current slot reservations are not taken into account.
This commit changes the selection algorithm to prefer slots where TFI
are available in both directions and which are less reserved.
Sponsored-by: On-Waves ehf
The idea behind this meta algorithm is to automatically select one of
the other algorithms based on the system state. Basically algorithm B
will be selected if the PDCH usage is low to improve throughput and
latency. Algorithm A will be selected to support more concurrent MS.
This commit adds a first simple state-less version of this algorithm
that always tries B first and only if that fails A is tried
afterwards.
The following VTY command is added to the 'pcu' node:
- alloc-algorithm dynamic
Ticket: #1934
Sponsored-by: On-Waves ehf
Currently these algorithms modify other objects (MS, TBF, PDCH) even
if the allocation will fail later on. To implement an algorithm that
dynamically tries another algorithm on failure (e.g. A after B), the
first (failing) algorithm should not change or damage anything.
This commit refactors algorithm A and B to delay the actual allocation
until it is known that the allocation will not fail.
Ticket: #1934
Sponsored-by: On-Waves ehf
MS iniated TCP connections generally result in a sequence
of short time UL and longer lasting DL TBFs, being interleaved
between several MS. This scenario is not covered by the existing
tests.
This commit adds a test, that allocates as man as possible TBFs
several times with different test modes without clearing the BTS (and
thus the TBF list) in between. The number of allocated DL TBFs in
each round is expected to be constant.
Sponsored-by: On-Waves ehf
Currently all TBFs are deleted after the allocation loop finishes.
This make it difficult to interleave the TBF allocation like it
happens with real MS.
This commit refactors the allocation loop into alloc_many_tbfs and
adds support for TLLIs, which are derived from the counter value and
used to retrieve an old MS object if alloc_many_tbfs is called a
second time.
Note that this does not make a difference for the existing tests.
Sponsored-by: On-Waves ehf
Currently the TBFs are registered in a TFI indexed array within the TRX
objects. TBFs can be searched globally by TFI and TRX number. This
conflicts with the use of the same TFI for different TBF on different
PDCH. This use case requires the specification of the PDCH as
additional search dimension.
This commit moves the TFI index TBF arrays into the PDCH objects. The
related methods are updated accordingly.
Ticket: #1793
Sponsored-by: On-Waves ehf
Currently the TFI are managed per TRX, thus only a maximum of 32 TBF
per direction and per TRX are possible simultaneously.
This commit modifies algorithm_a() to allow the sharing of TFI
between different PDCH. Since algorithm A only assigns a single slot
to each TBF, the TFI of each PDCH can be assigned independently.
This increases the maximum to 32 TBF per direction and per PDCH
concerning the TFI allocation.
Ticket: #1793
Sponsored-by: On-Waves ehf
Currently the TFI and the TRX have to be determined before the actual TBF
allocation function is called, passing TFI and TRX number as
parameters. This does fit to TFI reuse for different slots, since
this were tightly coupled with the slot selection.
This commit just moves the TFI selection into the alloc_algorithm
functions. The tfi parameter is removed from the the TFI alloc
functions. The trx parameter is changed into use_trx to optionally
limit the trx selection (same semantics like in tfi_find_free).
Sponsored-by: On-Waves ehf
Currently a single bit set is used to maintain a set of used TFI
without distinguishing between uplink and downlink. Since the
namespaces of UL and DL TFI are separate, this implementation is
not correct.
This commit changes gprs_rlcmac_pdch to use a separate bit set for
each direction. It also replace the corresponding conditional fprintf
statement in check_tfi_usage (AllocTest.cpp) by an equivalent
OSMO_ASSERT.
Sponsored-by: On-Waves ehf
This commit adds the check_tfi_usage function that checks the TFI
usage. It iterates through all TBFs, records on which PDCH it uses
which TFI and check for conflicts. It also checks the bits returned
by pdch->assigned_tfi(). The latter suffers from an bug in that
method (no separation of uplink and downlink), so a conditional
fprintf is used instead of an assertion. The method tfi_find_free
is checked for conflicts after allocations.
Sponsored-by: On-Waves ehf
Currently the handling of MS_B and MS_C is not compliant with TS
45.002, annex B.1. These values may only interpreted as 0, if
frequency hopping is not enabled and if there is no change from Rx to
Tx or vice-versa.
This commit sets Ttb/Trb to 1 if the table entry is MS_B/MS_C, since
only combined down/up access modes are supported.
Sponsored-by: On-Waves ehf
Currently the masks are computed equally for each class type. This
does not make much sense for class type 2 MS, since those are capable
to work in full duplex mode.
This commit sets the masks to 0xff for class type 2 MS.
Sponsored-by: On-Waves ehf
According to TS 45.002, 6.4.2.2 the choice whether Tta or Tra has to
be applied, depends on the medium access mode (currently always
dynamic) and the number of UL/DL slots. Currently either value can be
used which might result in combinations not covered by the spec.
This commit changes find_multi_slots() to skip non-compliant
combinations.
Note that this code will have to be extended, if other medium
access modes are implemented.
Sponsored-by: On-Waves ehf
Currently the slot selection of algorithm A is based on the current
slot usage by active TBF. Especially in the Dl after UL case which
reflects the commen use case "MS initiates TCP connection", the
resulting distribution is not optimal with respect to PDCH usage.
This commit changes the implementation to use the slot reservation
information instead.
Sponsored-by: On-Waves ehf
Currently when using the test modes TEST_MODE_DL_AFTER_UL or
TEST_MODE_UL_AFTER_DL, the first TBF is deleted before the second is
allocated. The far more interesting case were to keep the first TBF a
little bit longer until the second TBF has been created and delete
then. This comes closer the the situation observed with real MS,
where the first TBF takes some time (timeout or waiting for Ack)
before it gets deleted and thus detached from the MS object.
This commit delays the call to tbf_free accordingly.
The effect can be observed in the results of the algo A tests, where
the uniform distribution of the allocated PDCH is lost.
Sponsored-by: On-Waves ehf
Currently is is rather expensive to get TFI and USF usage per PDCH,
because the TBFs need to be scanned to get that information.
This commit adds corresponding bit sets which get updated by the
attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class.
Sponsored-by: On-Waves ehf
Currently the search of the "best" slot combination is done
separately from the UL slot selection, which can lead to an
allocation failure due to USF exhaustion even if another combination
had been possible.
This commit reduces the probability for this event by skipping UL
slots without free USF while calculation the capacity.
Note that the implementation is rather inefficient which will be
fixed by the following commits.
Sponsored-by: On-Waves ehf
Since currently the algorithm B will only allocate a single UL slot
and will have to stick to it (first common TS), the other possible UL
slots will not be allocated while the reservation is kept.
This commit adds code to update the reserved set of UL slots to only
reserve the single common TS when the UL TBF is allocated.
Interestingly this leads to fewer allocated TBF in some cases due to
USF exhaustion. This will be improved by the following commit "alloc:
Skip common TS without free USF".
Sponsored-by: On-Waves ehf
Currently al possible UL slots are included in the capacity
calculation which is the base of the slot selection. Nevertheless
UL-only slots will never be used, since only one uplink slot (which
must be a common slot) will be used.
This patch changes the code to only include common slots in the
capacity sum.
Note that this might not be optimal if algorithm B supported
multiple uplink slots.
Sponsored-by: On-Waves ehf
The current implementation always starts the downlink slot allocation
with the first possible slot, depending on which channels are enabled
and which multislot class is offered by the MS. So in configurations
with many (>4) PDCH, some PDCH are not really used.
The new implementation introduced by this commit differs as follows:
- The reservation mechanism provided by GprsMs is used to avoid
incompatibilities is used in the same way like algo A does. This
basically means, that the allocation is done once when the first
TBF is requested and then used until all TBF have been released.
- All combinations of Rx and Tx slots are checked for compatibility
with the multiscot class. Basically the combination with the most
usable PDCH and the least number of reservations is used.
- Only one UL slots is provided.
- Tta and Tra are checked.
Sponsored-by: On-Waves ehf
Since both TBF are based on the same reservation which means that
they should be compatible with respect to the slot usage, and since
the new TBF has not been forced to single slot usage, an update of
the allocation is not necessary now.
This commit removes the call to update() from within reuse_tbf().
Sponsored-by: On-Waves ehf
The call to tbf_alloc_dl_tbf misses the pointer to the GprsMs object
which is already known in that case (tbf_reuse). This leads to a full
reallocation of the PDCH slots, which is possibly incompatible with
the old set of slots. This can result in hanging TCP connections and
TCP connection failures.
This commit replaces the old NULL value by the actual GprsMs object.
Since the set_ms() is also done within the tbf_alloc_dl_tbf method,
that call is removed.
Sponsored-by: On-Waves ehf
Currently algorithm A bases its time slots selection on the number of
TBF actively using the PDCHs. This statistically prefers the first
time slots, especially with short living TBFs. So when the first TBF
is triggered by an uplink transfer (which generally results in a
short-lived TBF) the potentially longer living DL TBF will be bound
to the same slot. When another MS then requests an uplink TBF, it
will get the same slot (no UL TBF currently active).
This commit changes the algorithm to base its selection on reserved
slots instead.
Sponsored-by: On-Waves ehf
Currently only the first enabled PDCH will be used. Beside the
throughput this will also limit the number of TBFs:
- number of UL TBFs <= 7
- number of DL TBFs <= 32
This commit changes the allocation algorithm to use the PDCH with the
least number of attached TBFs. This will improve the troughput in
both directions and the UL limits:
- number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs
Ticket: #1794
Sponsored-by: On-Waves ehf
To avoid the need for a switch or conditional statement when needing
a TBF from an MS object in direction independant code, this method
contains that case distinction. For additional flexibility, a
reverse() function is added to get the opposite direction.
Sponsored-by: On-Waves ehf
Currently the PDCH object do not know anything about the TBFs using
them. To make the slot allocation load dependant, at least some
numbers are required.
This commit adds TBF counters (one per direction) and the related methods
attach_tbf, detach_tbf, and num_tbfs to gprs_rlcmac_pdch.
Sponsored-by: On-Waves ehf
When this environment variable is set, the logging level is set to
LOGL_DEBUG to help debugging without putting everything into
AllocTest.err.
Sponsored-by: On-Waves ehf
This commit adds:
- an assertion to check that count is valid,
- an assertion the verify that tbf_alloc did not fail
- a slots parameter to specify the enabled slots
- additional test invocations with more slots enabled
Sponsored-by: On-Waves ehf
This test allocates as many as possible UL/DL TBF pairs, shows their
PDCH usage, and checks how many of them has been created
successfully.
Sponsored-by: On-Waves ehf
Currently the MS object are created when the TLLI gets known.
Therefore some information (TA, MS class) must be stored in the TBF
itself and is copied to the MS object later on. This would get even
more complex, if the allocation algorithms were extended based on
this scheme.
This commit ensures, that an MS object will always be created on TBF
allocation, even if the TLLI is not yet known. These 'anonymous'
objects are still managed by the MS storage. To avoid dangling
entries without a TLLI there (which cannnot be retrieved anyway), the
timer in the MS objects is not started after all TBF have been
detached, so that they get deleted immediately in that case.
Note that an MS object can still be removed (e.g. by replacement)
from an existing TBF, so tbf->ms() can be NULL.
Ticket: #1794
Sponsored-by: On-Waves ehf
Currently the old TBF (either uplink or downlink) is passed around at
TBF allocation mainly to get information about the MS. To implement
more complex allocation algorithms, the MS object itself will be
needed anyway.
This commit replaces the old_tbf arguments by MS object arguments.
Sponsored-by: On-Waves ehf
This method does not do anything anymore, it's functionality has been
taken over by update_ms.
This commit removes gprs_rlcmac_tbf::update_tlli completely.
Sponsored-by: On-Waves ehf
Using complex initialiser lists doesn't seem to work well with Debian
Squeeze.
This commit changes the initialisation to use separate assignments
instead.
Fixes: Jenkins #601, #602
Addresses:
CXX LlcTest.o
../../tests/llc/LlcTest.cpp: In function 'void test_llc_meta()':
../../tests/llc/LlcTest.cpp:137: error: expected primary-expression
before '.' token
../../tests/llc/LlcTest.cpp:137: warning: extended initializer
lists only available with -std=c++0x or -std=gnu++0x
Sponsored-by: On-Waves ehf
To support extended initialiser lists some platforms (at least debian
squeeze) require to add -std=c++0x or -std=gnu++0x to CXXFLAGS. While
that option is deprecated on newer platforms (at least gcc 4.8) this
options is still supported on every platform currently in use.
This commit adds -std=gnu++0x to the CXXFLAGS used to compile
LlcTest.cpp.
Sponsored-by: On-Waves ehf
Currently the receive and expiry timestamps are prepended to the LLC
msgb before it is passed to gprs_llc_queue::enqueue(). Since this meta
information should not be counted as LLC octets, the gprs_llc_queue
needs to known about this (unless the correction was done in the LLC
layer).
This commit moves the meta information storage code into
gprs_llc_queue. The meta data is now stored in the control block
(cb) area of the msgb.
Note that the info pointer that is returned from the dequeue method
is only valid if that method returns a (non-NULL) msgb. It must not
be used after that msgb has been modified or freed.
Sponsored-by: On-Waves ehf
If just a few bytes are left to send to the MS, it makes sense to
reduce the coding scheme level to increase the throughput. This
has been shown by Chen and Goodman in their paper "Theoretical
Analysis of GPRS Throughput and Delay". See their throughput over C/I
measurement graphs (figures 4 and 5 in the paper) for details.
This commit implements a simplified CS downgrade feature for the
downlink. The coding scheme will be downgraded if there are only a
few octets are left to be send over the TBF (see the
downgrade-threshold command below) and the NACK rate is not low (the
CS will not get degraded on a high quality RF link). As an exception,
CS-3 will be degraded to CS-1, since CS-2 does not improve the
throughput in general when a few small packets are sent and the
signal fades slowly (see Chen/Goodman).
The following VTY command is added to the config-pcu node:
- cs downgrade-threshold <1-10000>
- cs no downgrade-threshold
to set the threshold of the number of remaining bytes to be RLC/MAC
encoded. The CS will only be reduced, if the number is below the
threshold. The 'no' command disables this feature completely. The
default value is 200 octets.
Sponsored-by: On-Waves ehf
To get the number of LLC octets that are stored in the queue, this
commit adds a m_queue_octets member along with a octets() method.
This value is updated similarly to m_queue_size on each modifying
method call.
Sponsored-by: On-Waves ehf
When the MS is pinged with a longer interval, many packets get lost
even if the GprsMs object is kept. If the interval is above the time
where the DL TBF is in state FLOW (mainly influenced be the
dl-tbf-idle-time command), an new TBF must be requested via AGCH for
each ICMP PING message.
Currently the LLC frame containing the PING is immediately stored
in the TBF and gets lost, if TBF establishment fails for some reason.
This commit moves all calls to put_frame() to schedule_next_frame(),
where the data is moved from the LLC queue to the frame storage
within the TBF object. This method is only called from within
create_new_bsn() when the TBF is in the FLOW state and the frame is
going to be encoded immediately.
At all other places, where put_frame() has been called before, the
LLC message is just appended to the LLC queue in the GprsMs object.
This change effectively simplifies the related code parts, since
date/len information and discard notifications is no longer needed
there.
Ticket: #1759
Sponsored-by: On-Waves ehf
Currently LLC frames are lost or even reordered when the TBF has be
established via the AGCH and the procedure fails for some reason.
This test tries to reproduce this behaviour by throwing away the
first TBF while calling the handle() method several times. The
results of create_dl_acked_block() are checked against expected
values (this is currently party disabled because the bug still
persists).
Ticket: #1759
Sponsored-by: On-Waves ehf
Currently only the RSSI value is passed to the upper layers. Other
values like TA and BER which are needed for TA update respectively CS
selection are not propagated.
This commit introduces and passes a struct that contains a set of
measurement values.
Sponsored-by: On-Waves ehf
This is needed to link programs using clock_gettime and related
functions when compiling with older glibc versions.
This should fix the Jenkins build. Nevertheless fixing this in
configure.ac were probably nicer.
Sponsored-by: On-Waves ehf
Currently the current CS value is stored in the cs field of
gprs_rlcmac_tbf and initialised when it is used the first time.
This commit adds separate fields for UL and DL CS values to the
GprsMs class and provides corresponding getter methods for GprsMs and
gprs_rlcmac_tbf.
Ticket: #1739
Sponsored-by: On-Waves ehf
Since more functionality will be moved to the GprsMs class, a pointer
to the current BTS object is added to allow access to configuration
data and other methods.
Sponsored-by: On-Waves ehf
The ms_class value is a property of the MS and thus belongs to the
GprsMs class. Nevertheless the MS object is created after the TLLI
gets known, so the value still has to be stored in the TBF initially.
This commit add the ms_class value to the GprsMs class and introduces
TBF accessor functions which either access that object or, if that is
not available, the value stored locally.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the MS object is immediately idle when all TBFs are
detached and if no guard is being used. Since the plan is to use the
MS objects to pass information from one TBF to the next one even
across the gap of some seconds of inactivity, a mechanism is needed
to keep the MS objects around for some time.
This commit extends the GprsMs class by a timer that keeps the MS
objects in non-idle state for some time after all TBFs have been
detached. The set_timeout method must be used with a non-zero value
to activate this feature.
Sponsored-by: On-Waves ehf
The TA value rather relates to an MS and not to a single TBF. So all
TBFs share the same TA value. Currently the TA value is stored per
TBF and eventually copied from an old TBF to a new one. It is in
general only passed with an RACH request when the TLLI and thus the
MS is not yet known.
This commit adds a TA member to the GprsMs class and uses that one
when the TBF is associated to an MS object. Since the TBF is not
always associated with an MS object (after RACH or when it has been
replaced by another TBF), the TA value is still stored in each TBF
and that value is used as long as no MS object is being associated.
Sponsored-by: On-Waves ehf
These tests cover the message exchange from receiving from the first
RACH request to the first data block when establishing an uplink TBF.
This will be used to check, whether TA and other values are passed to
an MS object correctly.
In addition, the RX RACH log message in rcv_rach is extended to
contain the single block fn.
Sponsored-by: On-Waves ehf
Currently a new TBF is chained to an existing older one, either of
the other direction (active or releasing) or of the same direction
(releasing). This does not work properly work if and uplink and a
downlink TBF are being established at the same time while an old TBF
is being released. In that case, one of them is thrown away and the
pending procedure is cancelled.
The chaining is no longer necessary since the GprsMs objects have
been introduced which keep track of the active TBFs.
This commit removes the TBF members m_new_tbf and m_old_tbf and the
related methods and code paths.
Note that a new TBF can replace an older TBF entry of the same
direction within an MS object when it is associated with an MS (e.g.
by TLLI or because it is assigned via another, already associated
TBF). In that case, the old TBF is no longer associated with an MS
object.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the DL TBF's TLLI are not set. This will have to change in
the future, when the m_new_tbf chaining is replaced by the usage of MS
object to group TBFs.
This commit just calls update_ms() on newly created TBFs. This
changes many of the lines written to stderr due to the TLLI change,
but doesn't change other aspects or messages beside creating and
destroying MS objects.
Sponsored-by: On-Waves ehf
This commit extends get_ms() to really compare the IMSI if it has
been given. Matching by TLLI has a higher precedence than matching by
IMSI.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the IMSI is stored in the TBFs. Since it directly refers to
an MS, it should rather be stored in an MS object.
This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs,
changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated
MS object, and adds getter and setter to GprsMs. Before changing the
IMSI of the associated MS object, assign_imsi() checks if there is
already another MS object with the same IMSI and eventually resets
the IMSI of that one. So using update_ms() and assign_imsi() ensures
that there are not two MS object entries is the storage with the
same TLLI or the same IMSI.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the generated IMSI contains blanks due to a missing '0'
flag in the corresponding snprintf statement. In addition, the buffer
is effectively limited to 15 bytes which is shorter than the
generated character sequence, such that the last character of the
IMSI is removed.
This patch fixes both issues. Since snprintf itself will add a
terminating \0 character, the whole buffer can be passed to snprintf.
Sponsored-by: On-Waves ehf
Currently the m_tlli member in GprsMs is set by the constructor,
circumventing the TLLI confirmation mechanism.
This commit replaces the get_or_create_ms() method by a create_ms()
method which takes the TLLI and the direction (UL or DL) as
parameters to select either set_tlli() or confirm_tlli(). The MS
object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is
extended to return the DL TLLI if both of the other TLLI are not set.
Note that create_ms() will not check whether an MS object with a
matching TLLI is already stored in the list, so it should only be
called after a corresponding get_ms() in general.
Sponsored-by: On-Waves ehf
Currently the TLLI is stored in each TBF. Since each MS is now
represented by a GprsMs object which takes care of TLLI updating,
and each TBF that has been associated with an TLLI also contains a
reference to a GprsMs object, per TBF TLLI handling is no longer
needed. Keeping all TBF m_tlli members up to date is complex and
doesn't currently work correctly in all circumstances.
This commit removes m_tlli and related members from the TBF class and
the tbf_by_tlli functions from the BTS class.
Ticket: #1674
Sponsored-by: On-Waves ehf
Debian is using the classic bfd linker and when passing
libosmogb as link dependency it always wants/needs to
resolve the bssgp_prim_cb symbol (which is to be provided
by the application).
Only keep the libosmocore dependency.
Fixes:
lib/libosmogb.so: undefined reference to `bssgp_prim_cb'
collect2: error: ld returned 1 exit status
Makefile:511: recipe for target 'llist/LListTest' failed
Currently the MS will be searched based on the TLLI in resue_tbf().
Since the MS object is already known in the TBF when the TLLI is set,
it can just be passed to the new TBF.
This commit removes the call to update_ms() and just adds
new_tbf->set_ms(ms()) which will also work as expected if ms() == NULL.
Sponsored-by: On-Waves ehf
The type of the TBF update_ms() is being called on does not always
reflect whether the TLLI has been signaled by the MS or the SGSN.
This commit adds an additional parameter to tell the method, in which
direction the TLLI has been passed.
Sponsored-by: On-Waves ehf
According to the specification (GSM 04.08/24.008, 4.7.1.5) after a
new P-TMSI has been assigned, the old P-TMSI must be kept basically
until it has been used by both sides. Since the TLLI will be derived
from the P-TMSI, the old TLLI must also be kept until the new TLLI
has been used by both MS and SGSN.
This commit modifies the TLLI handling of GprsMs accordingly.
set_tlli() is only used with TLLIs derived from MS messages,
confirm_tlli() is used with TLLIs derived from messages received from
the SGSN. tlli() returns the value set by the MS. check_tlli()
matches each of the TLLI used by either MS or SGSN as well as the old
TLLI until it has been confirmed.
Sponsored-by: On-Waves ehf
Use the MS storage to find a MS object for a given TLLI instead of
searching the TBF lists. The TBFs are then taken from the MS object,
if one has been found. If all TBF might be temporarily detached from
the MS object, a GprsMs::Guard is added to prevent the deletion of
the object, in case another TBF gets attached later on in the scope.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the MS objects are contained in the TBF objects only. To
allow for an extended life time after the TBF objects have been freed
and to find them based on TLLI, a container for the MS objects is
needed.
This commit adds the container class and also adds the corresponding
m_list member to GprsMs. Further integration into the PCU code is not
yet done.
Ticket: #1674
Sponsored-by: On-Waves ehf
This commit adds the LListHead class which is a wrapper around the
linuxlist. It adds an additional member to refer to the container,
since the container_of macro doesn't work properly with C++ classes.
All functions and macros from linuxlist.h are support except for the
entry macros (e.g. llist_entry, llist_for_each_entry, ...). To access
the container (entry), an entry() method is provided instead:
llist_for_each(pos, &elems) {
pos->entry()->do_something();
}
Sponsored-by: On-Waves ehf
To show the talloc report more easily, this commit adds a call to
talloc_report_full if the TALLOC_REPORT_FULL environment variable is
set (the value is ignored). Since the stderr output is checked by the
test suite, this feature is not enabled by default.
Sponsored-by: On-Waves ehf
Jacob Erlbeck