As we integrate osmo-pcu more and more with libosmocore features, it
becomes really hard to use them since libosmocore relies heavily on C
specific compilation features, which are not available in old C++
compilers (such as designated initializers for complex types in FSMs).
GprsMs is right now a quite simple object since initial design of
osmo-pcu made it optional and most of the logic was placed and stored
duplicated in TBF objects. However, that's changing as we introduce more
features, with the GprsMS class getting more weight. Hence, let's move
it now to be a C struct in order to be able to easily use libosmocore
features there, such as FSMs.
Some helper classes which GprsMs uses are also mostly move to C since
they are mostly structs with methods, so there's no point in having
duplicated APIs for C++ and C for such simple cases.
For some more complex classes, like (ul_,dl_)tbf, C API bindings are
added where needed so that GprsMs can use functionalitites from that
class. Most of those APIs can be kept afterwards and drop the C++ ones
since they provide no benefit in general.
Change-Id: I0b50e3367aaad9dcada76da97b438e452c8b230c
The assumption that TLLI 0x00000000 is invalid and can be used
as the initializer is wrong. Similar to TMSI, 0x00000000 is a
perfectly valid value, while 0xffffffff is reserved - use it.
According to 3GPP TS 23.003, section 2.4, a TMSI/P-TMSI with
all 32 bits equal to 1 is special and shall not be allocated by
the network. The reason is that it must be stored on the SIM,
where 'ff'O represents the erased state. According to section
2.6 of the same document, a local/foreign TLLI is derived from
P-TMSI, so the same rule applies to TLLI.
I manually checked and corrected all occurances of 'tlli' in the
code. The test expectations have been adjusted with this command:
$ find tests/ -name "*.err" | xargs sed -i "s/0x00000000/0xffffffff/g"
so there should be no behavior change. The only exception is
the 'TypesTest', where TLLI 0xffffffff is being encoded and
expected in the hexdump, so I regenerated the test output.
Change-Id: Ie89fab75ecc1d8b5e238d3ff214ea7ac830b68b5
Related: OS#4844
Avoid passing tons of params to internal helper function
tbf_nel_dl_assignment() in order to either fetch again the ms object or
create a new one. Let's instead create the ms function earlier if needed
and fill it with all the discovered information prior to calling the
helper function. This provides cleaner code and also better log output.
This way we also avoid trying to fill the MS twice and unneeded
getter+setter for TA.
tbf::imsi(): There' always an ms, so simply forward call to
ms()->imsi().
We can also get rid of assign_imsi, since the modified code is the only
place where it's used and there's already some code in place there to
update the MS. We instead merge it with set_imsi and keep the
duplication code to catch possible bugs from callers.
Move merge_and_clear_ms from tbf class to GprsMS, where it really
belongs.
Change-Id: Id18098bac3cff26fc4a8d2f419e21641a1f4c83b
This is another step forward towards a more clear data model where a TBF
always has a MS object (which may be lacking some information, and at a
later point when more information is found, it may actually be a
duplicated MS object and hence one duplicate removed and the TBF moved
to the object being kept).
This helps for instance in removing duplicated information stored in
the TBF which is really per MS, like ms_class, ta, etc. Since there's
always a MS object there's no need to keep a duplicate in both classes
in case there's no MS object.
It can already be seen looking at unit test logging that this kind of
data model already provides better information.
Some unit test parts were needed to adapt to the new model too.
Change-Id: I3cdf4d53e222777d5a2bf4c5aad3a7414105f14c
There's no real need for having different copies of this method in each
children. Furthermore, having the method implemented in the base class
made me shoot my foot while trying to move this to the tbf constructor
(see next commit), so let's simplify this and avoid other people
following into the same issue.
enable_egprs() in tbf.h is moved to be public since it needed (as it was
for the duplicated children mehtods with same name), but anyway it will
be moved to private in next commit.
Change-Id: Id7de060318201a42e51f277f898463f4b9a84eba
Return an interface to the window base class so that the tbf base class
can access the common window methods, such as set_ws(). It will be used
in next commit to get rid of duplicated function enable_egprs in both
dl_tbf and ul_tbf subclasses.
The user of the function can then decide to access more specific
functionaltiites of the window class by static casting it to the
specific direction (which is known by the caller since it operates on a
ul_tbf or a dl_tbf).
Change-Id: Ia2e1decf91be1184668e28297c2126affb9c7ae4
Output of all diag in different lines is really confusing, since the
user reads a timeout ocurred and then later in another line something
like "Downlink ACK was received" while no GSMTAP message shows any ACK.
Change-Id: I6a7d79c16c930f0712bc73b308409ececb1946ba
Since commit 322456ed47 (and previous
one), it is expected that a tbf object ALWAYS has a MS object referend
to it, even if it's a temporary copy which will later be merged when
TLLI/IMSI is retrieved and it is found that several MS objects relate to
the same MS.
The purpose of set_tlli_from_ul was mainly to update TBF's ms() to
old_ms before going through usual tbf->update_ms() path. That's not
really needed since ms() is already always set and TBFs for old_ms are
already freed in update_ms() and children function.
Change-Id: Ie8795e7a02032336e53febb65c11f9150c36d2a0
We have same kind of object splitted into two layers, in coding_scheme
and gprs_coding_scheme. Let's merge them together and get rid of the
class, which is not really useful because it's only a set of functions
operating on one enum value.
This change also fixes gcc 10.1.0 error about memseting a complex type
in rlc.h init().
Change-Id: Ie9ce2144ba9e8dbba9704d4e0000a2929e3e41df
The function is simply setting the ta on the ms, so simply make sure ta
is set on callers before passing the ms object.
Change-Id: Iebb9c57f458690e045ddc45c800209ad8cf621e0
It's really non-sense from architectural point of view to pass an
optional pointer to the MS holding the TBF and creating it otherwise.
TBFs shouldn't be creating MS they belong too.
This simple change requiring so many code line changes really exhibits
how badly entangled the object relationship is.
Another commit will follow doing the same for dl tbf.
Change-Id: I010aa5877902816ae246e09ad5ad87946f96855c
For a long time the VTY command to show all active TBFs was broken.
The TBF filtering (by allocation origin) logic allows one to show
TBFs allocated on CCCH, PACCH, or on both of them. In the latter
case we have been checking whether a TBF was allocated on both
logical channels at the same time.
Let's fix this by passing a flag-mask instead of boolean arguments.
To be able to use GPRS_RLCMAC_FLAG_* definitions from "tbf.h", let's
exclude them from "#ifdef __cplusplus ... #endif" block.
Change-Id: I1c9f401368af880a97d32905c4cce0da481ffc21
This will allow for configuration of some of the timers by the user,
and allow him to inspect current values being used.
It will be also useful for TTCN3 tests which may want to test some of
the timers without having to wait for lots of time.
Timers are splitted into 2 groups: BTS controlled ones and PCU controlled
ones. The BTS controlled ones are read-only by the user (hence no
"timer" VTY command is provided to change them).
TbfTest.err output changes due to timers being set up correctly as a
consequence of changes. Other application such as pcu_emu.cpp and
pcu_main.cpp had to previosuly set the initial values by hand (and did
so), but apparently TbfTest.c was missing that part, which is now fixed
for free.
Depends: libosmocore.git Id56a1226d724a374f04231df85fe5b49ffd2c43c
Change-Id: I5cfb9ef01706124be262d4536617b9edb4601dd5
Those namings my collide with usual osmocom "T" variable name associated
to a timer number, which will be added in following patches.
Change-Id: Ic2b5068a4882e4a043bf81496be30a378fdb9a09
* use enum CodingScheme directly instead of converting it to class and
back
* drop useless mode check
* log errorneous update attempt
Change-Id: I763136c2f356d63aa3d28d09c57fd5faf5336258
There have been test failures on the osmo-pcu Jenkins builders due
to apparent clock drift. Switch relevant code from gettimeofday()
to clock_gettime() with CLOCK_MONOTONIC to prevent time from going
backwards and causing negative time deltas in calculations.
Change-Id: I775d85d0d3ac740330879e588bdab6fce7f0b46c
Related: OS#3225
* store N310* counters in shared array similar to corresponding timers
* add functions to increment/reset counters
This avoids direct access to TBF counters from PDCH.
Change-Id: I8ffff9c7186f74bde7e6ac5f6e98f0b3e4c35274
Related: OS#1539
Many files include unnecessary headers and don't include headers which
are actually used. Because of that combined with the fact that OsmoPCU
is a mixture of C and C++, it makes it hard to modularize code. Fix
this (using iwyu [1] tool):
* add missing headers
* remove unused headers
[1] https://include-what-you-use.org/
Related: OS#1539
Change-Id: I8c9f488a43b099c72b2d30d3245e7ba50872fc00
* add function to set/unset given assignment type
* log assignment type flag changes
* update tests output with additional logs
This enables us to carefully track the TBF assignment type transitions.
Change-Id: I3fe9d52472be8b7f257e8326b2f84e8e7d7bd1f4
Related: OS#1759
* drop unused parameters (from both functions and structs)
* document used parameters and return values
* tighten types used for parameters
* use consistent formatting
Tests are adjusted accordingly but test results are left untouched to
avoid regressions.
Change-Id: I39d81ab64ff790b9c4c2d0312a574485cd83e755
Related: OS#2282
* add functions/macros for setting TBF's poll state
* add function for checking TBF's poll state
Change-Id: I6db1c4e7bd0a49aeb5e391afe371c36b96c6a702
Related: OS#1539
* add functions/macros for setting TBF's UL ack state
* add functions for checking TBF's UL ack state
N. B: this should not be confused with TBF-UL state.
Change-Id: I144483447d4b0b93e775da0e926ee45eb8ab39f3
Related: OS#1539
* add functions/macros for setting TBF's UL/DL state
* add functions for checking TBF's UL/DL state
* move pre-free check into separate function
N. B: this should not be confused with TBF-UL or TBF-DL state.
Change-Id: Idcbf5775d17b1247f2ed01788f9b0788ce66e871
Related: OS#1539
Previously all TBF-related events were logged as part of DRLCMAC which
is too broad to make it practically useful due to excessive amount of
log messages generated. Introduce dedicated log categories for
TBF-related events. Adjust test output as necessary.
Change-Id: I64d660e5971263d5c63d2ba95d50625c16a594aa
We use the same approach for osmo_fsm: when state transition happens,
it's not very useful to always log the transition function itself, it's
much more useful to see where the actual transition comes from.
Change-Id: I348ba89bdda2b44c7019e9c893c764ee08c80bec
Related: OS#1759
Move actual calculation into shared function and use it to set window
size for TBF. TBT test output requires cosmetic adjuestements due to
extended debug output.
Change-Id: Ib9f4a277082da3c71007f5f3b4f2acac8b994540
Related: OS#1759
The UL and DL TBF use different classes implementing window
management. Hence it's better to use it explicitly instead of using the
common window management superclass inside common TBF superclass. While
at it, also remove the direct access to window class - use accessor
functions instead.
Related: OS#1759
Change-Id: I0b55aa8947db65f7206adcf53ea32b74a831d9e6
* introduce generic function to check whether particular flag was set
for'a TBF and clear it if necessary. Use this instead of
clear_poll_timeout_flag()
* add function to explicitly set assignment and appropriate state flags
Overall this makes the code easier to read and debug.
Related: OS#1759
Change-Id: Ic4560280c72f91700f2e19c6c7f6658dc29625c2
* move window size encoding and writing into separate functions
* introduce necessary TBF wrappers to avoid direct m_window access
This is part of preparation work to move to separate UL/DL windows.
Related: OS#1759
Change-Id: I60184d5049bc7d7b119df5a9eb82d1c4b788c840
It either returns 0 or LLC queue size() which has size_t return
type. This means it can never be negative - hence it's better to use
size_t as return type.
Change-Id: I2a6e849d349ab12854976bd0d68537a370a9c83d
Fixes: CID181478
When troubleshooting TBF timers we're not only interested in timer
duration but also in the code which triggered it. Let's use LOGPSRC to
log it: wrap t_start() in a macro for convenience.
Change-Id: If5f883ae52c469e5158bad24da9904fdc455582f
Related: OS#2407
Use generic timer handling infrastracture to handle assignment/reject
internal timer. Rename timer array accordingly. Use defines with
explicit second/microsecond values to make it more readable.
Change-Id: I63fb7e6f0695383a83472c836a381a055f64690b
Properly reset the counter when receiving valid RLCMAC block and update
it when no data is received as per 3GPP TS 44.060 §8.1.1.1
Change-Id: I2f79c6153dc4073c9d293b2824979e6381576682
Fixes: OS#2407
Previously TBF got single timer so the pending timer was automatically
cancelled when new one was scheduled. Let's make it more robust by
implementing independent T31 xx timers from 3GPP TS 44.060 §13.2 with
corresponding start/stop functions and counters.
The semantics of the timers is preserved as before: pending timers are
restarted unconditionally. It might be neecessary to change this later on
after spec review.
N. B. T0: used for assign/reject timeouts, have to be properly
attributed and documented first.
Change-Id: I0305873ca47534f53441247217881da59625e1f7
Related: OS#2407
When troubleshooting complex issues with TBF lifecycle, it's much easier
to follow the logs which are consistently formatted. Add LOGTBF*() macro
similar to struct-specific log routines we use in other Osmocom project
and use it to log TBF-related messages in a unified way. Tweak test
output accordingly.
Related: OS#2407
Change-Id: I388249afefc32d2f6e5cb5e5abc6daf4dbd284ea
This is preparation patch for transition to separate UL/DL window
variables instead of current shared generic window. The setting of
window parameters is performed in functions specific to UL/DL TBFs but
the general EGPRS flag remains the same and is set via the same function
which is now marked as protected since it's only meant to be used by
UL/DL subclasses.
Related: OS#1759
Change-Id: I6056194b28a1eb9d69093d1dfdc65a11bc1fc579
* log timer values
* log start/stop cause
* update test output as necessary
This simplifies debugging issues with TBF timers.
Related: OS#2407
Change-Id: Ib8e537416af9bec5d447356286f44e9e8bbf1b7a
Move function declarations which use gprs_rlcmac_ul_tbf into tbf.h to
avoid compiler warning:
In file included from pcu_vty.c:15:0:
bts.h:166:27: warning: ‘struct gprs_rlcmac_ul_tbf’ declared inside parameter list will not be visible outside of this definition or declaration
void update_tbf_ta(struct gprs_rlcmac_ul_tbf *tbf, int8_t ta_delta);
^~~~~~~~~~~~~~~~~~
bts.h:167:24: warning: ‘struct gprs_rlcmac_ul_tbf’ declared inside parameter list will not be visible outside of this definition or declaration
void set_tbf_ta(struct gprs_rlcmac_ul_tbf *tbf, uint8_t ta);
^~~~~~~~~~~~~~~~~~
Change-Id: Ic34c72c8bff6d7c775f56bb6026fec5425f7dcb4
Pau Espin Pedrol
Vadim Yanitskiy
Pau Espin