* drop unused parameters (from both functions and structs)
* document used parameters and return values
* tighten types used for parameters
* use consistent formatting
Tests are adjusted accordingly but test results are left untouched to
avoid regressions.
Change-Id: I39d81ab64ff790b9c4c2d0312a574485cd83e755
Related: OS#2282
* add functions/macros for setting TBF's poll state
* add function for checking TBF's poll state
Change-Id: I6db1c4e7bd0a49aeb5e391afe371c36b96c6a702
Related: OS#1539
* add functions/macros for setting TBF's UL ack state
* add functions for checking TBF's UL ack state
N. B: this should not be confused with TBF-UL state.
Change-Id: I144483447d4b0b93e775da0e926ee45eb8ab39f3
Related: OS#1539
* add functions/macros for setting TBF's UL/DL state
* add functions for checking TBF's UL/DL state
* move pre-free check into separate function
N. B: this should not be confused with TBF-UL or TBF-DL state.
Change-Id: Idcbf5775d17b1247f2ed01788f9b0788ce66e871
Related: OS#1539
Previously all TBF-related events were logged as part of DRLCMAC which
is too broad to make it practically useful due to excessive amount of
log messages generated. Introduce dedicated log categories for
TBF-related events. Adjust test output as necessary.
Change-Id: I64d660e5971263d5c63d2ba95d50625c16a594aa
We use the same approach for osmo_fsm: when state transition happens,
it's not very useful to always log the transition function itself, it's
much more useful to see where the actual transition comes from.
Change-Id: I348ba89bdda2b44c7019e9c893c764ee08c80bec
Related: OS#1759
Move actual calculation into shared function and use it to set window
size for TBF. TBT test output requires cosmetic adjuestements due to
extended debug output.
Change-Id: Ib9f4a277082da3c71007f5f3b4f2acac8b994540
Related: OS#1759
The UL and DL TBF use different classes implementing window
management. Hence it's better to use it explicitly instead of using the
common window management superclass inside common TBF superclass. While
at it, also remove the direct access to window class - use accessor
functions instead.
Related: OS#1759
Change-Id: I0b55aa8947db65f7206adcf53ea32b74a831d9e6
* introduce generic function to check whether particular flag was set
for'a TBF and clear it if necessary. Use this instead of
clear_poll_timeout_flag()
* add function to explicitly set assignment and appropriate state flags
Overall this makes the code easier to read and debug.
Related: OS#1759
Change-Id: Ic4560280c72f91700f2e19c6c7f6658dc29625c2
It either returns 0 or LLC queue size() which has size_t return
type. This means it can never be negative - hence it's better to use
size_t as return type.
Change-Id: I2a6e849d349ab12854976bd0d68537a370a9c83d
Fixes: CID181478
Return right after logging error if attempting to start or stop unknown
timer.
Change-Id: Ie6ae564d41a5e03270685c6bafb3504278eb3551
Fixes: CID181512, CID181514
When troubleshooting TBF timers we're not only interested in timer
duration but also in the code which triggered it. Let's use LOGPSRC to
log it: wrap t_start() in a macro for convenience.
Change-Id: If5f883ae52c469e5158bad24da9904fdc455582f
Related: OS#2407
Use generic timer handling infrastracture to handle assignment/reject
internal timer. Rename timer array accordingly. Use defines with
explicit second/microsecond values to make it more readable.
Change-Id: I63fb7e6f0695383a83472c836a381a055f64690b
Properly reset the counter when receiving valid RLCMAC block and update
it when no data is received as per 3GPP TS 44.060 §8.1.1.1
Change-Id: I2f79c6153dc4073c9d293b2824979e6381576682
Fixes: OS#2407
Previously TBF got single timer so the pending timer was automatically
cancelled when new one was scheduled. Let's make it more robust by
implementing independent T31 xx timers from 3GPP TS 44.060 §13.2 with
corresponding start/stop functions and counters.
The semantics of the timers is preserved as before: pending timers are
restarted unconditionally. It might be neecessary to change this later on
after spec review.
N. B. T0: used for assign/reject timeouts, have to be properly
attributed and documented first.
Change-Id: I0305873ca47534f53441247217881da59625e1f7
Related: OS#2407
When troubleshooting complex issues with TBF lifecycle, it's much easier
to follow the logs which are consistently formatted. Add LOGTBF*() macro
similar to struct-specific log routines we use in other Osmocom project
and use it to log TBF-related messages in a unified way. Tweak test
output accordingly.
Related: OS#2407
Change-Id: I388249afefc32d2f6e5cb5e5abc6daf4dbd284ea
This is preparation patch for transition to separate UL/DL window
variables instead of current shared generic window. The setting of
window parameters is performed in functions specific to UL/DL TBFs but
the general EGPRS flag remains the same and is set via the same function
which is now marked as protected since it's only meant to be used by
UL/DL subclasses.
Related: OS#1759
Change-Id: I6056194b28a1eb9d69093d1dfdc65a11bc1fc579
* log timer values
* log start/stop cause
* update test output as necessary
This simplifies debugging issues with TBF timers.
Related: OS#2407
Change-Id: Ib8e537416af9bec5d447356286f44e9e8bbf1b7a
Currently TBF support only single Txxxx timer so scheduling another
timer will cancel out the one which is already running. Until the proper
fix is in place, let's at least log this situation as error.
Note: cosmetic adjustement to test output is required - we do not report
restart of the same timer twice because "restarting" assumes it anyway.
Change-Id: I462464a1e6df937b72cad65d19cd48e95dc4db45
Related: OS#2407
We do not use this style (#warning as an issue tracker replacement) in
any other Osmocom project. Also those warnings clutter compiler output
making it harder to spot warnings for the actual code.
Change-Id: I72070e2a027e60e8b80c12ccfa23ff075434689f
* introduce enum describing poll kind and use it in set_polling()
* move state change into set_polling()
* move logging into set_polling() and unify output
* move duplicated code into static function
* adjust tests to match unified logging output
Change-Id: I14074207f8bbc18b3ebd60875bb99a0a3a4b399d
Related: OS#1524
This function does not really belongs to BTS and it heavily relies on
direct access to TBF-DL members anyway.
Change-Id: I04584103018675a2f35cfb565473bfd81a208d7c
Closes: OS#1540
In case the counter group allocation fails, we must handle this
gracefully and fail the allocation of the parent object, too.
Change-Id: Id6d780c67b4af15aaa5c6f2b8b00f2a0b70a7385
Related: OS#2361
When Packet resource request is received, PCU will generate the
packet access reject if no resources are present. The encoding is done
based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7.
This patch also includes the test case to validate the generated
packet access reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
This adds compression of bitmap in PUAN. The compressed bitmap
is used only if the number of bits in the bitmap does not fit in
the message and there is a gain after compression.
The algorithm is part of libosmocore and so there is dependency
on the libosmocore for compilation.
The algorithm is tested on integration setup by forcing compression.
Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
Add value_string describing UL and DL TBF states and use it for logging
errors while freeing TBFs.
Change-Id: I292ec81ab602c65ef86e6e3e85740182b63474b6
Adds spb counters at BTS level(show bts statistics).
Adds RLC/MAC downlink control msg at ms level(show ms imsi <imsi_val>).
Adds the number of coding schemes counter for UL at TBF level.
Change-Id: Icbe4ba95e34bea89ee36f532d099db68204b7c38
Adds DL throughput in show ms imsi <imsi_value>.
Adds the number of coding schemes counter and rlc nacked counter at TBf level.
Change-Id: Ia95b0404989b00db0e7ba416bc40d09ef41fde1c
When PDAN/EPDAN with channel description is received, PCU will generate the
packet access reject if no resources are present. The encoding is done
based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7.
This patch also includes the test case to validate the generated
packet access reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I096a3bb44a65533b9e9b091925dd5f70a8696d6
This reverts commit f1a7b8fc66.
Conflicts:
tests/tbf/TbfTest.err
The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002
with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e).
The error observed is the following log output (was viewing both osmo-bts-sysmo
and osmo-pcu logs interleaved):
<0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission
<0002> tbf.cpp:893 - Assignment was on CCCH
<0002> tbf.cpp:899 - No uplink data received yet
<0007> l1sap.c:904 RACH for packet access
<0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653
[repeat]
When removing this single commit from current osmo-pcu master, GPRS service
works well on SysmoBTS, with current osmo-bts master.
The TbfTest.err expected output needed adjustment after the revert.
Disclaimer: I am not aware of adverse effects this commit may have. I have no
idea what the WAIT_ASSIGN state is used for -- further review is required.
Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
gcc6 is optimizing if (!this) {CODE} as this is assumed to never be a
std::nullptr here. Move the null check to the caller. In preparation of
removing the check within llc_queue->size(), all callers must check the object
before calling it. Make sure of that: make the llc_queue() access function
protected and offer only a public llc_queue_size() function that incorporates
the NULL check. All current callers are only interested in the
llc_queue_size().
Tweaked-by: nhofmeyr
Change-Id: I88cc3180f8f86785e3f07981895dabddf50b60a2
Earlier there was no handling for recalculation of DL window
size during tbf update. Which has been fixed in this patch.
Related: OS#1808
Change-Id: I41aa807068520460fd665a55e3529e60f6bbb630
A subsequent patch needs to call this from gprs_rlcmac_tbf::update(),
so to avoid code dup, put the calculation in a separate function.
Related: OS#1808
Change-Id: I7c7777d43f843bbd3421503fc2a8600f148ca035
* initialize with invalid TA instead of making assumption that phone is
located within 550 meters (TA=0)
* only set valid TA
Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0
Related: OS#1526
All checks of (this == null) will be eliminated by GCC >= 6.1
(https://gcc.gnu.org/gcc-6/changes.html, Value range propagation now
assumes that the this pointer of C++ member functions is non-null.
Change-Id: Ifddaef70bb0a4402050c817b1000d515c3a7118b
Reviewed-on: https://gerrit.osmocom.org/136
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Reviewed-by: Holger Freyther <holger@freyther.de>
Currently the state on the TBF is set to ASSIGN when it is created
and in general changed to FLOW when it is acknowledged by the MS. The
moment when the assignment is really transmitted to the MS (which can
take some time) is not reflected by the state. A TBF can considered
to be valid, when the assignment is received by the MS.
Add the state WAIT_ASSIGN that is entered when the assigment has been
send to the MS (more precisely: when the corresponding RTS has been
processed or the message has been sent to the BTS).
The TBF, its PDCH(s), and its TFI can be assumed to be valid, when the
TBF has a state of WAIT_ASSIGN or higher (assuming that the TBF
starting time has not been set, which is currently only done for SBA,
which are not associated with a TBF).
Note that due to queuing in the BTS there can still be a invalid
time period for immediate assignments, when the request is lingering
in the AGCH or PCH queues.
Sponsored-by: On-Waves ehf
Currently the CCCH flag is cleared and the PACCH flag is set when a
multislot upgrade is scheduled for a downlink TBF, even if the MS has
never confirmed in any way that the PACCH really exists. This can
happen if the MS did not receive the DL IMM.ASS. Since the CCCH flags
gets cleared in that case, the IMM.ASSS is never retried and all
subsequent PACKET DOWNLINK ASSIGNMENTS will fail.
This commit delays the update of these flags until the MS has
responded with a corresponding CONTROL ACK.
Sponsored-by: On-Waves ehf
Currently the old TFI is always used as ID when a
PACKET DOWNLINK ASSIGNMENT is generated. This fails
if the old TBF has not been fully assigned yet. The
MS will then ignore the PDA.
This commit changes write_packet_downlink_assignment to accept
an additional parameter old_tfi_is_valid and uses the new TBF's
TLLI instead of the olf TFI if that parameter is set to false.
Sponsored-by: On-Waves ehf
Currently the checks for and the actual polling is done in several
places by copy & paste of several lines of code. This hinders changes
of they polling is handled internally and also is likely source of
programming mistakes.
Separate this into a check_polling function, that checks whether
polling is possible and returns the FN and the RRBP to be used in
that case. Otherwise the cause is logged (LOGL_DEBUG) and a negative
error value is returned. There are no other side effect beside the
logging.
If the call is successful, the set_polling method can be used to
actually register the polling.
Extend the encoder functions' parameters lists by an rrbp parameter.
Sponsored-by: On-Waves ehf
Currently tbf->control_ts is used to look up an incoming poll
response. Since that may eventually change, poll timeouts could
theoretically happen in that case.
Store the real poll TS in tbf->poll_ts at all places where
tbf->poll_fn is set. Do not use tbf->control_ts to look up
outstanding polls.
Sponsored-by: On-Waves ehf