While at it, fix a typo in the test output.
This function is nowadays only used in ms_current_pacch_slots(), which
is used only to print the PACCH TS (the first common UL & DL TS).
Change-Id: Id1d0b681f6866618f9f3a8c64d6a6c809ca50ea7
Those function don't really require the full FN, hence let's pass only
the required information.
This makes the implementation here less dependent on how/if we are able to calculate
full FNs based on RFN: We get an RFN, and we have to encode so that the RFN can be
derived again, so feels less cumbersome having to go through RFN->FN->RFN which may
only cause possible issues if there's some FN timing bug.
3GPP TS 44.018 10.5.2.30 Request Reference:
"The purpose of the Request Reference information element is to provide the random
access information used in the channel request and the frame number, FN modulo 42432"
3GPP TS 44.018 10.5.2.38 Starting Time:
"The purpose of the Starting Time information element is to provide the start TDMA
frame number, FN modulo 42432."
Change-Id: If9b758434c00f2a3868534d5be84946809c989a9
The functions l1if_open_pdch and l1if_close_pdch have a misleading
naming since what they actually do is opening and closing the TRX since
they return and accept a context (obj) that is valid for a whole TRX.
This also explains why the other functions accept a timeslot as
parameter in addition to the context. Let's rename those functions so
that it is clear what they do.
Related: OS#6022
Change-Id: I395a60b2fba39bac4facec78989bac20f0cef0d3
This patch finally decouples TBF allocation from resource allocation.
This will allow in the future reserving resources without having to
require a TBF object to exist.
Change-Id: I2856c946cb62d6e5372a1099b60e5f3456eb8fd4
Make the caller hold a reference to the MS object just allocated, so
that it hs to explicitly unref it and, in turn, if no new references
were added during its use, trigger release of the MS object.
This is useful to avoid leaking MS object if it was allocated and then
no TBF is attached to it because allocation of TBF failed.
Related: OS#6002
Change-Id: I2088a7ddd76fe9157b6626ef96ae4315e88779ea
gprs_default_cb_ms_idle() is changed to have the same implementation as
previous bts_ms_idle_cb(), since that's the only one being used in
osmo-pcu code. It makes no sense to use different callback logic in unit
tests.
This is another step towards simplifying the code and getting rid of the
idle/active_cb().
Change-Id: I2a06d17588572a21dc5a14ddbde83766076b446d
That information is not required during allocation of the object, and
most times it is not known.
Defer setting it only to meaningul values in paths obtaining the
information from peers.
Change-Id: I36f07dc389f7abe205fc4bcddbde93735f5d5cfc
There is a function l1if_connect_pdch, but no complementary function
like we have it with l1if_open_pdch and l1if_close_pdch. The reason for
this is that the PHY implementations that rely on a femtocell DSP do not
need to disconnect the pdch explcitly. However, the planned support for
the E1 based Ercisson RBS CCU will require an explicit disconnect. So
lets add a function call for this.
Change-Id: Ied88f3289bda87c48f5f9255c4591470633cc805
Related: OS#5198
First commit towards trying to have alloc algorithm as isolated as
possible from others parts of the code trying to avoid state changes on
data structures.
Change name also because the alloc_algo not only allocated TS, but TFIs
and USFs.
Change-Id: I33a6c178c64a769f05d3880a69c38acb154afa62
There's no real reason (other than historical) why code in llc should be
kept as c++ code. Let's rewrite it as C so that it can be included by
existing C code without having to add C->C++ shim, ifdefs all around,
etc.
This simplifies code and easies modification/improvement of the related
objects.
Change-Id: I250680ba581167d7398b2f734769c756cbb61c48
There are 2 methods "rcvd_dl_ack()" in osmo-pcu code. One is used by
osmo-pcu itself, and the other is only used in tests.
Changing the tests to use the same method as osmo-pcu allows removing
the second one, and with it, a lot of code and complexity out of
osmo-pcu.
Change-Id: I14d9312cb61534dc97fca83141b9c0cd933c9206
This is only an initial implementation, where all state changes are
still done outside the FSM itself.
The idea is to do the move in several commits so that they can be
digested better in logical steps and avoid major break up.
Related: OS#2709
Change-Id: I6bb4baea2dee191ba5bbcbec2ea9dcf681aa1237
Let's disable category here since we don't care about its formatting here.
In any case, every test relying on logging output validation should
always explicitly state the config to avoid issues in the future if
default values change.
Change-Id: I7f9c56313cfaa74ebe666f44763a83d8102f5484
Related: OS#5034
This patch doesn't really tests whether osmo-pcu can work on a multi-bts
environment, but it prepares the data structures to be able to do so at
any later point in time.
Change-Id: I6b10913f46c19d438c4e250a436a7446694b725a
Previous work on BTS class started to get stuff out of the C++ struct
into a C struct (BTS -> struct gprs_glcmac_bts) so that some parts of
it were accessible from C code. Doing so, however, ended up being messy
too, since all code needs to be switching from one object to another,
which actually refer to the same logical component.
Let's instead rejoin the structures and make sure the struct is
accessible and usable from both C and C++ code by rewriting all methods
to be C compatible and converting 3 allocated suboject as pointers.
This way BTS can internally still use those C++ objects while providing
a clean APi to both C and C++ code.
Change-Id: I7d12c896c5ded659ca9d3bff4cf3a3fc857db9dd
Currently the BTS object (and gprs_rlcmac_bts struct) are used to hold
both PCU global fields and BTS specific fields, all mangled together.
The BTS is even accessed in lots of places by means of a singleton.
This patch introduces a new struct gprs_pcu object aimed at holding all
global state, and several fields are already moved from BTS to it. The
new object can be accessed as global variable "the_pcu", reusing and
including an already exisitng "the_pcu" global variable only used for
bssgp related purposes so far.
This is only a first step towards having a complete split global pcu and
BTS, some fields are still kept in BTS and will be moved over follow-up
smaller patches in the future (since this patch is already quite big).
So far, the code still only supports one BTS, which can be accessed
using the_pcu->bts. In the future that field will be replaced with a
list, and the BTS singletons will be removed.
The cur_fn output changes in TbfTest are actually a side effect fix,
since the singleton main_bts() now points internally to the_pcu->bts,
hence the same we allocate and assign in the test. Beforehand, "the_bts"
was allocated in the stack while main_bts() still returned an unrelated
singleton BTS object instance.
Related: OS#4935
Change-Id: I88e3c6471b80245ce3798223f1a61190f14aa840
As we integrate osmo-pcu more and more with libosmocore features, it
becomes really hard to use them since libosmocore relies heavily on C
specific compilation features, which are not available in old C++
compilers (such as designated initializers for complex types in FSMs).
GprsMs is right now a quite simple object since initial design of
osmo-pcu made it optional and most of the logic was placed and stored
duplicated in TBF objects. However, that's changing as we introduce more
features, with the GprsMS class getting more weight. Hence, let's move
it now to be a C struct in order to be able to easily use libosmocore
features there, such as FSMs.
Some helper classes which GprsMs uses are also mostly move to C since
they are mostly structs with methods, so there's no point in having
duplicated APIs for C++ and C for such simple cases.
For some more complex classes, like (ul_,dl_)tbf, C API bindings are
added where needed so that GprsMs can use functionalitites from that
class. Most of those APIs can be kept afterwards and drop the C++ ones
since they provide no benefit in general.
Change-Id: I0b50e3367aaad9dcada76da97b438e452c8b230c
The assumption that TLLI 0x00000000 is invalid and can be used
as the initializer is wrong. Similar to TMSI, 0x00000000 is a
perfectly valid value, while 0xffffffff is reserved - use it.
According to 3GPP TS 23.003, section 2.4, a TMSI/P-TMSI with
all 32 bits equal to 1 is special and shall not be allocated by
the network. The reason is that it must be stored on the SIM,
where 'ff'O represents the erased state. According to section
2.6 of the same document, a local/foreign TLLI is derived from
P-TMSI, so the same rule applies to TLLI.
I manually checked and corrected all occurances of 'tlli' in the
code. The test expectations have been adjusted with this command:
$ find tests/ -name "*.err" | xargs sed -i "s/0x00000000/0xffffffff/g"
so there should be no behavior change. The only exception is
the 'TypesTest', where TLLI 0xffffffff is being encoded and
expected in the hexdump, so I regenerated the test output.
Change-Id: Ie89fab75ecc1d8b5e238d3ff214ea7ac830b68b5
Related: OS#4844
BTS simply notifies the PCU about the supported MCS, and PCU is
responsible for providing correct data formatting supported for the BTS
and the target MS.
Related: OS#4544
Change-Id: Ifcf23771bd23afc64ca6fea38948f98f2d134ecb
Some tests were wrong (TypesTest) and required modification, since they
were setting a EGPRS MS but then expecting a GPRS assignment.
Change-Id: I9d3ee21c765054a36bd22352e48bde5ffca9225a
Return an interface to the window base class so that the tbf base class
can access the common window methods, such as set_ws(). It will be used
in next commit to get rid of duplicated function enable_egprs in both
dl_tbf and ul_tbf subclasses.
The user of the function can then decide to access more specific
functionaltiites of the window class by static casting it to the
specific direction (which is known by the caller since it operates on a
ul_tbf or a dl_tbf).
Change-Id: Ia2e1decf91be1184668e28297c2126affb9c7ae4
In order to be able to encode frequency hopping parameters, let's
pass a const pointer to 'gprs_rlcmac_pdch' (PDCH slot) directly,
instead of passing all related parameters separately.
Change-Id: I6bccad508f0fdccc4a763211008dd847a9111a8d
Related: SYS#4868, OS#4547
Newer gcc 10.1.0 is erroring due to memset being applied on a complex
type, so let's start by removing this only function outside of the
struct.
Change-Id: I20426557d9b3049ab275fadb92e10ea8a860a119
The default loglevels of some log categories are configured to
LOGL_INFO. This is still to verbose, lets use LOGL_NOTICE here.
Change-Id: Ibb1cd1a94fb4fdd0147e073f8c1c82562c2c14ef
Related: OS#2577
It's really non-sense from architectural point of view to pass an
optional pointer to the MS holding the TBF and creating it otherwise.
TBFs shouldn't be creating MS they belong too.
This simple change requiring so many code line changes really exhibits
how badly entangled the object relationship is.
Another commit will follow doing the same for dl tbf.
Change-Id: I010aa5877902816ae246e09ad5ad87946f96855c
Write TAI (if available) when generating Rest Octets for UL
Assignment. This should not affect actual PCU behavior because TAI is
not yet supported by upper layers but we have to adjust corresponding
tests anyway.
That's updated version of reverted commit.
Change-Id: I69407793bdb863be5fc42adadf75842d22f27335
Related: OS#3014
Use bitvec_set_*() directly without external write pointer tracking to
simplify the code. This is part of IA Rest Octets (3GPP TS 44.018
§10.5.2.16) which is the last part of the message so it should not
interfere with the rest of encoding functions.
The difference in the expected test output is due to proper handling of
TAI which should not be transmitted for SBA according to the Note in
Table 10.5.2.16.1 in 3GPP TS 44.018.
The change was manually tested against real mobile phone using options
'gprs mode gprs' in osmo-bsc.cfg and 'two-phase-access' in osmo-pcu.cfg
to make sure appropriate code path is actually triggered.
That's partially based on reverted commit 93d947f5e8.
Change-Id: I97d53c27c1ca9e032d431b3aa7f915027d63ddc0
Related: OS#3014
Previously result of ".to_num() - 1" was used without any checks which
means that in case of to_num() returning zero we would effectively try
to encode (uint8_t)(-1).
Let's fix this by using proper mcs_chan_code() function which returns
Channel Coding Command for MCS without the need to further correct it
and adjust expected tests output accordingly.
Change-Id: I868062a81fffe6714a811c032215f25a79259905
There is a duality of initialization: early_init() in bts.cpp wants to init
logging even before static instances get initialized. Make sure that
tall_pcu_ctx is initialized during early_init() as well. There is a build
context that does not seem to include bts.cpp (osmo-pcu-remote), so to be sure,
init tall_pcu_ctx as NULL and both in early_init() as well as pcu_main.cpp,
init both tall_pcu_ctx and logging if it is still NULL.
Change-Id: I2199b62d0270bd35dec2283e8f5b364b7c63915b
Receive the mnc_3_digits flag from the PCU interface.
Bump the PCU interface to 9.
This is one part of the three identical pcuif_proto.h patches:
- I49cd762c3c9d7ee6a82451bdf3ffa2a060767947 (osmo-bts)
- I787fed84a7b613158a5618dd5cffafe4e4927234 (osmo-pcu)
- I78f30aef7aa224b2e9db54c3a844d8f520b3aee0 (osmo-bsc)
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore)
Change-Id: I787fed84a7b613158a5618dd5cffafe4e4927234
This utility functions is used by TBF allocation routines and only
tested indirectly through allocation test. Let's add proper exhaustive
test which checks all uint8_t values.
This also requires adding missing include to pcu_utils.h
Change-Id: If08a7f0d31f0e5ad8a5efa5885880aed19c329ab
When RACH is received, PCU will generate the Immediate assignment reject
message if no resources are present. The encoding is done based on section
9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the
test case to validate the generated Immediate assignment reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
Earlier there was an incorrect encoding of BSN status in GPRS PUAN message.
This was a bottle neck for GPRS performance testing for UL. Which has been fixed
in this patch.
Related: OS#1806
Change-Id: I98e586aa5cb9200cf03e092556304211d4d459aa
This patch adds a test case which expects a current bug with
GPRS PUAN encoding. The test's expectation
is corrected along with the bug fix in a subsequent commit
Related: OS#1806
Change-Id: Ied0f1dd3037d8fac6a772f4e097defb72634f955