Move actual calculation into shared function and use it to set window
size for TBF. TBT test output requires cosmetic adjuestements due to
extended debug output.
Change-Id: Ib9f4a277082da3c71007f5f3b4f2acac8b994540
Related: OS#1759
The UL and DL TBF use different classes implementing window
management. Hence it's better to use it explicitly instead of using the
common window management superclass inside common TBF superclass. While
at it, also remove the direct access to window class - use accessor
functions instead.
Related: OS#1759
Change-Id: I0b55aa8947db65f7206adcf53ea32b74a831d9e6
Move repetitive checks into corresponding macros to avoid copy-pasted
code. This also enables strickter checks some of which were apparently
omitted while copy-pasting.
This is part of preparation work to move to separate UL/DL windows.
Related: OS#1759
Change-Id: If7aa72f5aa66c5e9c255542c066b5494c098aab2
* move window size encoding and writing into separate functions
* introduce necessary TBF wrappers to avoid direct m_window access
This is part of preparation work to move to separate UL/DL windows.
Related: OS#1759
Change-Id: I60184d5049bc7d7b119df5a9eb82d1c4b788c840
Previously TBF got single timer so the pending timer was automatically
cancelled when new one was scheduled. Let's make it more robust by
implementing independent T31 xx timers from 3GPP TS 44.060 §13.2 with
corresponding start/stop functions and counters.
The semantics of the timers is preserved as before: pending timers are
restarted unconditionally. It might be neecessary to change this later on
after spec review.
N. B. T0: used for assign/reject timeouts, have to be properly
attributed and documented first.
Change-Id: I0305873ca47534f53441247217881da59625e1f7
Related: OS#2407
When troubleshooting complex issues with TBF lifecycle, it's much easier
to follow the logs which are consistently formatted. Add LOGTBF*() macro
similar to struct-specific log routines we use in other Osmocom project
and use it to log TBF-related messages in a unified way. Tweak test
output accordingly.
Related: OS#2407
Change-Id: I388249afefc32d2f6e5cb5e5abc6daf4dbd284ea
* log timer values
* log start/stop cause
* update test output as necessary
This simplifies debugging issues with TBF timers.
Related: OS#2407
Change-Id: Ib8e537416af9bec5d447356286f44e9e8bbf1b7a
Currently TBF support only single Txxxx timer so scheduling another
timer will cancel out the one which is already running. Until the proper
fix is in place, let's at least log this situation as error.
Note: cosmetic adjustement to test output is required - we do not report
restart of the same timer twice because "restarting" assumes it anyway.
Change-Id: I462464a1e6df937b72cad65d19cd48e95dc4db45
Related: OS#2407
There's no need for each test case to carry their own log_info and
filter function. They can simply use the global gprs_log_info and
configure the stderr log verbosity according to their needs.
Change-Id: I8706a624e5d06e062d1198711aa197fbd0860769
* introduce enum describing poll kind and use it in set_polling()
* move state change into set_polling()
* move logging into set_polling() and unify output
* move duplicated code into static function
* adjust tests to match unified logging output
Change-Id: I14074207f8bbc18b3ebd60875bb99a0a3a4b399d
Related: OS#1524
Numerous calls assign a return value without asserting its value. Add
assertions and thus also eliminate compiler warnings about unused values.
Change-Id: I7f14198cfd747dae68b8aaa3b8d6ff7fc49ab824
The rach request contains a relative frame number (Fn % 42432),
while BTS::rcv_rach() accepts the full frame number only.
Since the BTS is always aware of the full frame number this is
not a problem. But for BSC co-located PCU schemes it is a problem
since the rach request only contains the relative frame number
as mentioned above.
The pcu continusly receives frame number updates with the GSM time
indication message. It is simple to re-calculate the full frame
number from that information.
This patch makes BTS::rcv_rach() compatible with relative frame
numbers, while not breaking the compatibility for full frame
numbers
Change-Id: Iaa182d8d29c6a0f5fa06064c2eb48b21b1ba2775
When Packet resource request is received, PCU will generate the
packet access reject if no resources are present. The encoding is done
based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7.
This patch also includes the test case to validate the generated
packet access reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
This test case is for testing generation of
EGPRS PUAN. Corresponding log files .ok and .err
are modified.
Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
This adds compression of bitmap in PUAN. The compressed bitmap
is used only if the number of bits in the bitmap does not fit in
the message and there is a gain after compression.
The algorithm is part of libosmocore and so there is dependency
on the libosmocore for compilation.
The algorithm is tested on integration setup by forcing compression.
Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
Add value_string describing UL and DL TBF states and use it for logging
errors while freeing TBFs.
Change-Id: I292ec81ab602c65ef86e6e3e85740182b63474b6
When PDAN/EPDAN with channel description is received, PCU will generate the
packet access reject if no resources are present. The encoding is done
based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7.
This patch also includes the test case to validate the generated
packet access reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I096a3bb44a65533b9e9b091925dd5f70a8696d6
When RACH is received, PCU will generate the Immediate assignment reject
message if no resources are present. The encoding is done based on section
9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the
test case to validate the generated Immediate assignment reject message.
This patch is integration tested on Osmo-trx setup with Ettus B210 board
and LG F70 MS with some simulation code changes in Osmo-pcu.
Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
Fix alignment of EPDAN outside the RLC transmit window,
according to section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7.
The specification explains that a bit within the uncompressed bitmap
whose corresponding BSN is not within the transmit window shall be
ignored. Without this fix PCU was dropping the EPDAN message and not
updating the status of BSNs which are inside the RLC window. This patch
updates the status of the BSNs which are inside the window and ignores
the remaining bits.
Related: OS#1789
Change-Id: Id07d178970f168f5389016c1eea31eb6b82057b6
This patch adds a test case test_tbf_epdan_out_of_rx_window,
which expects a current bug with EPDAN for interpretation of the
bitmap explained in section 9.1.8.2.4 in 44.060 version 7.27.0
Release 7. The specification explains that a bit within the
uncompressed bitmap whose corresponding BSN is not within the
transmit window shall be ignored. But current PCU implementation
drops the EPDAN and does not update status of the BSN which are
inside the window. The test's expectation is corrected along with
the bug fix in a subsequent commit.
Related: OS#1789
Change-Id: If32b67f5c05707155281128b776a90a1e3d587b2
This reverts commit f1a7b8fc66.
Conflicts:
tests/tbf/TbfTest.err
The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002
with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e).
The error observed is the following log output (was viewing both osmo-bts-sysmo
and osmo-pcu logs interleaved):
<0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission
<0002> tbf.cpp:893 - Assignment was on CCCH
<0002> tbf.cpp:899 - No uplink data received yet
<0007> l1sap.c:904 RACH for packet access
<0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653
[repeat]
When removing this single commit from current osmo-pcu master, GPRS service
works well on SysmoBTS, with current osmo-bts master.
The TbfTest.err expected output needed adjustment after the revert.
Disclaimer: I am not aware of adverse effects this commit may have. I have no
idea what the WAIT_ASSIGN state is used for -- further review is required.
Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
Earlier there was no handling for recalculation of DL window
size during tbf update. Which has been fixed in this patch.
Related: OS#1808
Change-Id: I41aa807068520460fd665a55e3529e60f6bbb630
row 4 of Table 10.4.14a.1 of Spec 44.060 version 7.27.0 Release 7. Says
"The previous RLC data block contains a Upper Layer PDU, or a part of it,
that fills precisely the previous data block and for which there is no
length indicator in that RLC data block.
The current RLC data block contains a Upper Layer PDU that either fills
the current RLC data block precisely or continues in the next RLC data block."
So when we receive block with 1st LI: value=0 and Value of E bit in the
same octet as 1, we expect 2 chunks with 1st chunk as length as 0 and complete
and 2nd chunk as length non zero. But with this bug we see only 1 chunk causing
incorrect assembling
This issue has been fixed in this patch.
Related: OS#1811
Change-Id: I2cd0fca3ed28a553ede3f4b8a7d3267284dd2c9b
This patch adds a test case test_tbf_li_decoding which
expects a current bug with LI decoding for row 4 of Table 10.4.14a.1
in 44.060 version 7.27.0 Release 7.
The test's expectation is corrected along with the bug
fix in a subsequent commit
Related: OS#1811
Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
The test failure was introduced by 9bbe1600cc
"Fix Timing Advance handling": between patch build checking and patch
submission, a new section was added to TbfTest.cpp which also needs adjustment.
Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de>
Change-Id: If077da5f21fd5cba54556f1dead05a1bc4ea5540
* initialize with invalid TA instead of making assumption that phone is
located within 550 meters (TA=0)
* only set valid TA
Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0
Related: OS#1526
This patch adds a test case test_tbf_update_ws. Which expects a
current bug with DL window size calculation. The test's expectation
is corrected along with the bug fix in a subsequent commit
Related: OS#1808
Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
Interface structure between osmo-bts and osmo-pcu is updated with
the parameters to differentiate the type of RACH and further
support 11 bit RACH. The function prototype and definitions are
changed accordingly. Interface version number is increased.
Change-Id: I265c2d92d36d6cbcbeee60cdd8407dafe1da06a4
Earlier there was an incorrect encoding of PUAN when VQ is not equal
VR case for EGPRS UL RLC window. The PCU was encoding the same PUAN
message always irrespective of radio condition. This was a bottle neck
for performance testing. Which has been fixed in this patch.
Related: OS#1793
unit test assertion in the previous commit is fixed in this patch.
Change-Id: Iba7b1995028bd81749ffb080616b2ad5f2540d57
This patch adds a test case which expects a current bug with EGPRS PUAN
encoding when VQ != VR. The test's expectation is corrected along with
the bugfix in a subsequent commit
Adds test_tbf_puan_urbb_len to describe the following bug:
EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN
messages regardless of the urbb_len.
Related: OS#1793
Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
Modify the EGPRS DL TBF flow to support Split block during
Retx. This patch will also Upgrade the test suite with test cases
to validate the EGPRS Downlink SPB for Retransmission
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly.
Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
This patch will modify the EGPRS UL TBF flow to support Split block
handling. This patch also contains test suite modification for SPB UL.
Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3
MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested
in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited.
Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
ARFCN is already part of TRX struct so there's no need to supply it
explicitly in a separate parameter. I've tested and those are the same
anyway.
Change-Id: I8e975c52cbc819427880093b1e5371fe1f8ce460
During MCS upgradation such as MCS6->MCS9, 2 blocks which
were sent separately as MCS6, will be clubbed into one MCS9
block during retransmission. Same holds good for
MCS5->MCS7 transistion. During MCS reduction such as
MCS9->MCS6,2 blocks which were sent together will be
sent separately during the retransmission case.
Same is verified through the generated log file. Currently
MCS8->MCS6 transition is not supported. The retransmission
MCS is being calculated from Table 8.1.1.2 of TS 44.060.
The same test cases are also integration tested on Nuran
1.0 platform.
Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
It makes no sense to call functions on null pointer object. Use
the name of the old tbf.
Change-Id: I93b8c07a0b2de40a11e94fd6c212897cbe3b50ef
Reviewed-on: https://gerrit.osmocom.org/212
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
Adds support to find the puncturing scheme for retransmission
with MCS change, retransmission with no MCS change, transmission
case. Puncturing scheme selection for retransmission case with
MCS change is aligned with TS 44.060 9.3.2.1. Puncturing scheme
selection for retransmission without MCS change, fresh transmission
is aligned with TS 44.060 10.4.8a.3.1, 10.4.8a.2.1, 10.4.8a.1.1
This patch is for fixing encoding of padding bits according to the
3gpp spec 44.060 section 11, wherein it shall always start with 0
bit followed with spare padding bits.
During introduction of basic EGPRS feature new hex dump messages
from a different working network log were used in Unit test. These
exposed the issue of incorrect handling of padding bits encoding
in osmo-pcu.
Corrections in the existing test vector of rlcmac is also updated.
In testsuite tbf appropriate corrections for the Tbftest.err is
also done.
Currently single BSN blocks of size 68 (a single unit from MCS-8)
are put into a MCS-6 block with padding according to TS 44.060
Annex J. Unfortunately, these packets are ignored by the E71. This
might be related to the currently incorrect usage of the puncturing
schemes and the RSB bit (the puncturing schemes are not updated and
the RBS flag is never set).
Avoid downgrading from MCS-8 to MCS-6 if there is no second block
available. Send the block twice instead.
Sponsored-by: On-Waves ehf
Currently only one BSN block is encoded in each RLC data message,
even if MSC7-9 are used, which transport two independant (except for a
max BSN delta of 512) BSN blocks. In that case, the same block is
just put twice into the same message.
The current create_dl_acked_block(fn, ts) method handles
block selection (resend, new BSN, dummy block, ...) and restart
handling in one method and is too complex to extend it accordingly.
Therefore this commit move the block selection/creation handling into
a new method (take_next_bsn) which delivers the next BSN along with a
hint, whether it may be combined with another block. In that case,
the function can be called a second time (this time with a valid
previous BSN, that's the one returned by the first call) to get the
second BSN. The real block generation method
create_dl_acked_block(fn, ts, index, index2) is then called with both
BSNs as indices (the second must be -1, if there is only one BSN).
Note that every BSN returned by take_next_bsn should be passed to
create_dl_acked_block to avoid state inconsistencies.
Sponsored-by: On-Waves ehf
Currently the method is hard-coded to support a single BSN only.
MCS-7 to MCS-9 encode 2 data blocks into a single RLC data message.
This commit refactors create_dl_acked_block to process any number
of blocks internally.
Note that this does not extend the parameter list accordingly and
just duplicates the BSN if these MCS are being used.
Sponsored-by: On-Waves ehf
Currently the state on the TBF is set to ASSIGN when it is created
and in general changed to FLOW when it is acknowledged by the MS. The
moment when the assignment is really transmitted to the MS (which can
take some time) is not reflected by the state. A TBF can considered
to be valid, when the assignment is received by the MS.
Add the state WAIT_ASSIGN that is entered when the assigment has been
send to the MS (more precisely: when the corresponding RTS has been
processed or the message has been sent to the BTS).
The TBF, its PDCH(s), and its TFI can be assumed to be valid, when the
TBF has a state of WAIT_ASSIGN or higher (assuming that the TBF
starting time has not been set, which is currently only done for SBA,
which are not associated with a TBF).
Note that due to queuing in the BTS there can still be a invalid
time period for immediate assignments, when the request is lingering
in the AGCH or PCH queues.
Sponsored-by: On-Waves ehf
The EGPRS support will need more information to encode the IMMEDIATE
ASSIGMENT. Instead of adding more parameters pass a pointer to the
TBF unless an SBA shall be done (indicated by tbf == NULL). All
values that can be derived from the TBF and are not needed for an SBA
are removed from the parameter list.
Return a negative value on error.
Sponsored-by: On-Waves ehf
Currently the old TFI is always used as ID when a
PACKET DOWNLINK ASSIGNMENT is generated. This fails
if the old TBF has not been fully assigned yet. The
MS will then ignore the PDA.
This commit changes write_packet_downlink_assignment to accept
an additional parameter old_tfi_is_valid and uses the new TBF's
TLLI instead of the olf TFI if that parameter is set to false.
Sponsored-by: On-Waves ehf
Currently the checks for and the actual polling is done in several
places by copy & paste of several lines of code. This hinders changes
of they polling is handled internally and also is likely source of
programming mistakes.
Separate this into a check_polling function, that checks whether
polling is possible and returns the FN and the RRBP to be used in
that case. Otherwise the cause is logged (LOGL_DEBUG) and a negative
error value is returned. There are no other side effect beside the
logging.
If the call is successful, the set_polling method can be used to
actually register the polling.
Extend the encoder functions' parameters lists by an rrbp parameter.
Sponsored-by: On-Waves ehf
Currently tbf->control_ts is used to look up an incoming poll
response. Since that may eventually change, poll timeouts could
theoretically happen in that case.
Store the real poll TS in tbf->poll_ts at all places where
tbf->poll_fn is set. Do not use tbf->control_ts to look up
outstanding polls.
Sponsored-by: On-Waves ehf
Currently existing TBF can be reused after an MS has sent a RACH
request. Since the MS can be or most probably is in packet idle mode
in that case, the TBF are no longer usable even if they share the
PDCHs and the control TS with the new one.
There are occasional freezes where the MS does no longer react to
messages sent on the PACCH.
This change aborts all pending TBFs if a new TBF is or has been
established via RACH.
Sponsored-by: On-Waves ehf
Currently the is a release() function which takes care of
statistics and shutdown of properly finished TBFs, but which
cannot be used for aborted TBFs.
This commit add an abort() method which handles unacked RLC blocks
as lost and doesn't start a release timer. This method will be
invoked by tbf_free() for downlink TBF.
Sponsored-by: On-Waves ehf
Make use of variables, log them to LOGL_DEBUG, and reduce code
duplication.
This should help to narrow down the cause why snd_dl_ass are not
answered by the MS sometimes.
Sponsored-by: On-Waves ehf
Currently the values in the BSSGP RA Cap IE are eventually use
overwrite the 'good' values obtained from the MS earlier.
Use the 'good' values when the are present, which is assumed if
at least one of ms->ms_class() or ms->egprs_ms_class() is set.
Sponsored-by: On-Waves ehf
Currently the window size is fixed to 64 even for EGPRS.
Support dynamic window sizes depending on the number of PDCH. The
WS can be set to b + f * N_PDCH. If the result is not valid according
to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the
next lower valid value (or 64).
The following VTY commands are added (config-pcu node):
window-size <0-1024> set base (b) value and leave f unchanged
window-size <0-1024> <0-256> set base (b) and factor (f)
Sponsored-by: On-Waves ehf
Currently the plain 'egprs' command enables EGPRS but doesn't prevent
phones from being served in GPRS mode if they do not support EGPRS.
This involves complex frame allocation implementations in dynamic
mode, especially if 8PSK is being used. This is due to the inability
of non-EGPRS phone to decode 8PSK USF and ES/P altogether. Since
polling has a higher priority than USF, collisions will have to be
prevented by the PCU by never using an GPRS USF if it refers to a FN
that is already being used for polling.
This commit just disables mixed usage by ignoring GPRS-only request
if EGPRS is enabled.
The following VTY command (config-pcu node) is changed:
egprs -> egprs only
Sponsored-by: On-Waves ehf
The bitvec RBB is always valid, even when FINAL_ACK_INDICATION is
set. This is done by the ack/nack decoder function which fake a
bitmap starting with V(A) up to V(S)-1 in that case (see
Decoding::handle_final_ack).
Call gprs_rlcmac_dl_tbf::update_window unconditionally and only use
is_final for logging and TBF state changes in
gprs_rlcmac_dl_tbf::rcvd_dl_ack.
Sponsored-by: On-Waves ehf
Currently TBF related tasks (status changes, counter updates,
LLC dummy command insertion) as well as
RLC data block generation are done within create_new_bsn.
The data block creation part has already been copied to
the stateless Encoding::rlc_data_to_dl_append function.
This commit changes create_new_bsn to use the encoder function and
just care about the TBF related stuff.
Since the rlc_data_to_dl_append function has been validated against
the test cases being described in annex B of TS 44.060, this
commit fixes an encoder bug which leads to broken LLC frames in
a special case (see example B.2, the main header's E bit was
erroneously set to 1 in that case). When this happens, the LLC frame
will get discarded after reassembly, so that TCP will have to
retransmit the lost packet.
Sponsored-by: On-Waves ehf
This commit removes the use of struct rlc_dl_header from
gprs_rlcmac_dl_tbf::create_dl_acked_block and
gprs_rlcmac_dl_tbf::create_new_bsn. Instead of patching the
data area directly, the RLC block encoding functions are used.
Note that the data unit encoding is still hard-coded to GPRS in
create_new_bsn, so using MCS 1-4 (albeit being supported by the
encoder) will not work yet.
Sponsored-by: On-Waves ehf
Currently GPRS is always used for downlink, which violates TS 44.060
(concurrent TBF must have the same mode).
Enable EGPRS mode for downlink if the EGPRS MS class is != 0 and
EGRPS has been enabled.
Note that EGPRS Ack/Nack handling is not yet implemented, so enabling
EGPRS will not work still. But we will now get EGPRS DL ACK/NACK
messages now from the MS.
Sponsored-by: On-Waves ehf
Currently the TBF and MS object use a plain integer value
(current_cs) to manage the coding scheme. This makes it difficult to
support the MCS schemes. GprsCodingScheme supports a partial ordering
of these values (CS and MCS) and provides safe increment and
decrement methods.
Use the GprsCodingScheme type instead of integer for cs fields and
variables. Add a 'mode' to GprsMs which can be set to either GPRS,
EGPRS, or EGPRS_GMSK which also set the initial values of
current_cs_ul/dl. Select the mode based on max_mcs_ul and max_mcs_dl.
Sponsored-by: On-Waves ehf
Currently GPRS is handled by the old code path while EGPRS already
uses the unified functions. The rcv_block_egprs is basically not
specific to EGPRS and just needs minor modifications to handle GPRS.
This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified
rcv_data_block method and uses it for GPRS, too.
Note that the logging messages of the new parser are different.
Sponsored-by: On-Waves ehf
Currently gprs_rlcmac_tbf::extract_tlli takes care of decoding and
the TBF update. These are really different things and doing the
decoding in extract_tlli makes EGPRS support more complex.
This commit moves the TBF state related part into a new method
gprs_rlcmac_tbf::set_tlli_from_ul.
Sponsored-by: On-Waves ehf
Currently the block size is mapped by a switch statement to strip
extra bits that are not used for RLC blocks. That information is
already available via the GprsCodingScheme class.
This commit moves the CS/MCS detection to the rcv_block message and
passes the cs object via rcv_block_gprs, where the length gets
adjusted, to gprs_rlcmac_pdch::rcv_data_block_acknowledged. There the
switch statement is removed.
Note that the TbfTest.err changes due to an additional log message.
Sponsored-by: On-Waves ehf
The multislot (MS) class and the EGPRS MS class can also be passed
via BSSGP in an MS Radio Access Capability element which can
optionally be contained in a DL-UNITDATA PDU. While this case is fully
supported for GPRS, the EGPRS MS class in BSSGP messages is ignored.
This commit extends gprs_rlcmac_dl_tbf::handle to pass the EGPRS MS
class, too.
Note, that the EGPRS class is not yet taken from the CSN.1 RA
capability and is always set to 0. Note also, that append_data
still uses ms_class only.
Sponsored-by: On-Waves ehf
The leak rate sent to the SGSN does not reflect the current CS level,
lost frames, and control message overhead. So the SGSN cannot do
proper queue control under non-optimal conditions.
This commit computes the leak rate for the last flow control interval
by computing the maximum theoretical leak rate and basically
substracting control blocks, nacked blocks, and reduced block sizes
due to CS downgrade. By using this approach, the value will by more
stable on low load, where the value will tend to be near the value
derived from the configuration. On full load the transmitted value is
completely derived from the measurements.
Note that the MS default values are no adapted to the adapted BVC
leak rate, since a single MS which has a lower link quality would
otherwise be reducing the rate of another MS with good radio
conditions, which would not make much sense if they did not share any
PDCH.
Sponsored-by: On-Waves ehf
Currently an existing DL TBF can get lost in the process of
establishing an UL TBF via RACH. This can lead to stalled connections
until the network sends more LLC frames.
This commit adds a check for a non-empty LLC queue after the UL TBF
has been established to rcv_control_ack (GPRS_RLCMAC_UL_ASS_WAIT_ACK
path) to eventually establish a new DL TBF on the UL TBF's PACCH.
Sponsored-by: On-Waves ehf
Currently an existing DL TBF is freed immediately, when a resource
request is received. This makes sense since the MS might have dropped
it when switching to the PDCH signaled via the AGCH for the SBA. But
if the TBF still is assumed to exist on the MS side, there might be
TFI collisions if the old TBF object is not kept to block its TFI
for some time.
This commit changes rcv_resource_request to call release() instead of
tbf_free() on the DL TBF object (if it exists).
Sponsored-by: On-Waves ehf
Currently reuse_tbf (partly) resets the old DL TBF and uses its PACCH
to establish a new DL TBF. The method can not be used with UL TBFs.
This commit replaces the reuse_tbf method into a
gprs_rlcmac_dl_tbf:release method which triggers the TBF's timer
based deletion (so that the TFI is still reserved for some time) and
a gprs_rlcmac_tbf::establish_dl_tbf_on_pacch which can establish DL
TBFs on existing PACCHs of either DL or UL TBFs.
Sponsored-by: On-Waves ehf
Currently when a second MS object has been created for an MS, because
the TLLI was not known yet, the will be detected in
gprs_rlcmac_tbf::extract_tlli and the two objects will be merged by
update_ms. But when the dl_tbf is moved from the old to the new
(second) MS object, the old MS object can get idle and be removed
before the object are merged. This can cause LLC frame loss when the
MS object is deleted immediately after getting idle (no timeout
configured).
This commit adds a guard to keep the MS object until extract_tlli has
been executed.
Sponsored-by: On-Waves ehf
This reverts commit e91bd3babd.
That commit seems to cause hanging DL TBFs when there was a RACH
based UL TBF establishment while it that TBF is active. This could be
caused by the use of a different PDCH for the SBA.
Conflicts:
tests/tbf/TbfTest.cpp
tests/tbf/TbfTest.err
Currently all of these messages are discarded if they are assumend to
be caused by noise. But even in these cases, the FN and TN values
which are added by the DSP are valid. So these can be used to update
the current_frame value.
The osmo-bts sets the fBFILevel of a physical channel to -200dB if it
is used for PDTCH or PACCH which is the case for all PDCH. This way
a data_ind or ra_ind message is already send at least once per block
period (4 frames) per PDCH. These messages are passed to either
handle_ph_data_ind or handle_ph_ra_ind even if they contain garbage
data.
The ra_ind messages are sometimes sent a few frames earlier than
data_ind messages using the same frame.
This commit adds calls to update the current_frame value based on all
of these messages before they are discarded. The FN taken from ra_ind
are passed with an increased max_delay (5) to compensate for early
ra_ind messages.
Sponsored-by: On-Waves ehf
The FN of the data_ind taken from the DSP are monotonic, so latency
does not affect the detection of poll timeouts if these FN are used.
If the FN is larger than a poll_fn value, it can safely be assumed
that the poll response will not arrive later on.
Currently a max_delay of 60 frames is used, which has the drawback
that additional ~250ms will pass until a lost ACK is detected.
Using the data_ind's FN alone breaks the poll timeout detection if
there are no other MS sending data blocks.
This commit adds BTS::set_current_block_frame_number that is called
with the FN taken from data_ind messages. The max_delay is set to 0
which removes the additional delay, when this FN is used to detect
poll timeouts. So the average additional delay decreases with the
number of data_ind per time. The current_frame is updated unless it
seems to have been updated already (assumed if 0 < cur_fn - block_fn
< 500). Thus the time_ind has still priority to update the
current_frame value.
Sponsored-by: On-Waves ehf
This commit adds the relevant frame number to the "poll timeout"
logging message. In addition, logging is added to the places where
poll_fn gets set.
The goal is to track down the source for frequent "poll timeout"
messages.
Sponsored-by: On-Waves ehf
Currently when calling GprsMs::attach_tbf and a TBF of the same
direction already exists, the old TBF gets detached from the MS
object.
Therefore that TBF object loses access to that MS object including
for instance TLLI and IMSI.
This leads to failing DL TBF reuses, since the downlink assigment
cannot be sent on the PACCH later on because that must be sent on the
old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved.
This commit fixes this bug by changing the GprsMs implementation to
keep a list of replaced (old) TBFs. TBFs are only removed when they
are being detached explicitely (see tbf_free and set_ms).
Addresses:
tbf.cpp:741 We have a schedule for downlink assignment at uplink
TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no
downlink TBF
Sponsored-by: On-Waves ehf
This tests the usage of an existing TBF that is no longer in FLOW
state to request a new DL TBF via the old TBF's PACCH.
The test triggers a bug that breaks the association between both TBF
objects, resulting in packet loss and transmission stalling.
Sponsored-by: On-Waves ehf
Currently the assignment is completed by manipulating the state of
the TBF objects directly by setting the state fields to fixed values.
This way, the PCU's code that is responsible to update the state
accordingly is not tested.
This commit changes this to simulate RLC Control Acknowledgement
messages instead.
Sponsored-by: On-Waves ehf
This function basically request the generation of the next downlink
RLC block. Since this will no really send somthing to the PCU, the
current name can be misleading.
This commit just renames the function.
Sponsored-by: On-Waves ehf
The block number can always be deduced from the frame number. The
current test code handles the block number explicitely, which makes
the code more complex and has also led to block number errors cause
by not wrapping the numbers (valid block numbers range from 0 to 11).
This commit changes send_rlc_block to always compute the block number
based on the frame number. It also turns the block_nr into an
optionaly output-only parameter.
Sponsored-by: On-Waves ehf
The current implementation takes a lot of parameters (bts, trx_no,
...) that can also be taken from a TBF object.
This commit adds an alternative variant with just takes a TBF, the fn
(in/out), and the block number (in/out).
Sponsored-by: On-Waves ehf
Currently the pending LLC packets are lost in some cases when MS
objects are merged, for instance after a RACH when there were 2 MS
object for the same MS (they get merged, when the TLLI is known for
both objects).
This patch modifies GprsMs::merge_old_ms to move all pending LLC
packets (if there are any) to the current MS object.
Sponsored-by: On-Waves ehf
Currently all active TBF of an MS are killed if a Packet Resource
Request is received from the MS. In general this happens after a RACH
request. This does not happen after a resource request that has been
included into a Downlink Ack/Nack.
Sometimes an UL TBF is requested by an MS via RACH while a DL TBF is
running for instance to send a TCP Ack. This can happen, if a former
request via PACCH did not work.
This commit removes the killing of the DL TBF from
gprs_rlcmac_pdch::rcv_resource_request().
Sponsored-by: On-Waves ehf
This adds tests for
- RA update with RACH for the RAUpdateComplete message
- RACH for UL while DL is active (LLC queue not empty)
Sponsored-by: On-Waves ehf
This commit fixes several issues:
- Set MS class in request
- Set IMSI in establish_ul_tbf_two_phase
- Fake assigment acknowledgement in establish_ul_tbf_two_phase
- Fix TFI bit offset to 1 (was 2)
Sponsored-by: On-Waves ehf
Currently the functions test_tbf_single_phase and test_tbf_two_phase
do the test logging, BTS intialisation, and the complete message
sequencing on their own. Therefore they cannot be used to test more
complex sequences like TBF reestablishment.
This commit moves the code that does the actual messaging into own
functions. The frame number handling is generalised which also fixes
a block number wrapping error on the way.
Sponsored-by: On-Waves ehf
Currently the merging of the meta information (MS class, IMSI) takes
place in gprs_rlcmac_tbf::merge_and_clear_ms(). This makes it
difficult to merge the internal state and does not directly relate to
TBFs anyway.
This commit moves this into a new method GprsMs::merge_old_ms.
Sponsored-by: On-Waves ehf
Currently there is not support for Network Service (NS) logging.
This commit adds the missing definitions and sets the default level
to INFO. Further configuration can now be done with the 'logging
level ns' VTY command.
Sponsored-by: On-Waves ehf
Currently if an MS retries to access the PCU by using RACH and if
there is already an entry for that MS, a duplicated MS object
referring to the same TLLI is created. This is caused by blindly
setting the TLLI without querying the MS storage to avoid
inconsitencies.
This leads to several entries in the MS storage that are assigned to
the same TLLI. If that happens, 'show ms all' can display multiple
entries with the same TLLI (note that an MS object can belong to
several TLLIs, so there might be an intersection that is not visible
in the list) or 'show tbf all' can show entries with MS_CLASS == 0 in
some cases.
This commit changes update_ms() to merge and clean up old entries
that belong to the given TLLI if they exist. Some data (like the MS
class) is copied to the new MS object.
Note that TBF belonging to the old MS object are deleted immediately
if they have not registered a timer.
Sponsored-by: On-Waves ehf
Currently when receiving a PACKET DL ACK/NACK message with the Final
Ack Indicator bit set, the TBF's state is set to
GPRS_RLCMAC_WAIT_RELEASE but T3193 is only started when the LLC queue is
empty. Otherwise the reuse_tbf() method is called to establish a new
DL TBF. In that case, the timer is not started. This will leave the
current TBF without a timer so it is potentially not released later
on.
This is recognisable by sticky entries in the output of the
'show tbf all' command and possibly allocation failures if there are
too many of them.
This commit changes the code to always start T3193 to make sure, that
a timer is always active when the the state is set to
GPRS_RLCMAC_WAIT_RELEASE.
Note that TS 44.060, 9.3.2.6 requests to release the 'old' TBF
immediately in some cases, which is not implemented by this change.
This will lead to a longer reservation period of the TFI only, which
is safer than reassigning it too early.
Sponsored-by: On-Waves ehf
Currently the TBFs are registered in a TFI indexed array within the TRX
objects. TBFs can be searched globally by TFI and TRX number. This
conflicts with the use of the same TFI for different TBF on different
PDCH. This use case requires the specification of the PDCH as
additional search dimension.
This commit moves the TFI index TBF arrays into the PDCH objects. The
related methods are updated accordingly.
Ticket: #1793
Sponsored-by: On-Waves ehf
Currently the TFI are managed per TRX, thus only a maximum of 32 TBF
per direction and per TRX are possible simultaneously.
This commit modifies algorithm_a() to allow the sharing of TFI
between different PDCH. Since algorithm A only assigns a single slot
to each TBF, the TFI of each PDCH can be assigned independently.
This increases the maximum to 32 TBF per direction and per PDCH
concerning the TFI allocation.
Ticket: #1793
Sponsored-by: On-Waves ehf
Currently the TFI and the TRX have to be determined before the actual TBF
allocation function is called, passing TFI and TRX number as
parameters. This does fit to TFI reuse for different slots, since
this were tightly coupled with the slot selection.
This commit just moves the TFI selection into the alloc_algorithm
functions. The tfi parameter is removed from the the TFI alloc
functions. The trx parameter is changed into use_trx to optionally
limit the trx selection (same semantics like in tfi_find_free).
Sponsored-by: On-Waves ehf
Currently is is rather expensive to get TFI and USF usage per PDCH,
because the TBFs need to be scanned to get that information.
This commit adds corresponding bit sets which get updated by the
attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class.
Sponsored-by: On-Waves ehf
Since both TBF are based on the same reservation which means that
they should be compatible with respect to the slot usage, and since
the new TBF has not been forced to single slot usage, an update of
the allocation is not necessary now.
This commit removes the call to update() from within reuse_tbf().
Sponsored-by: On-Waves ehf
The call to tbf_alloc_dl_tbf misses the pointer to the GprsMs object
which is already known in that case (tbf_reuse). This leads to a full
reallocation of the PDCH slots, which is possibly incompatible with
the old set of slots. This can result in hanging TCP connections and
TCP connection failures.
This commit replaces the old NULL value by the actual GprsMs object.
Since the set_ms() is also done within the tbf_alloc_dl_tbf method,
that call is removed.
Sponsored-by: On-Waves ehf
Currently algorithm A bases its time slots selection on the number of
TBF actively using the PDCHs. This statistically prefers the first
time slots, especially with short living TBFs. So when the first TBF
is triggered by an uplink transfer (which generally results in a
short-lived TBF) the potentially longer living DL TBF will be bound
to the same slot. When another MS then requests an uplink TBF, it
will get the same slot (no UL TBF currently active).
This commit changes the algorithm to base its selection on reserved
slots instead.
Sponsored-by: On-Waves ehf
Currently only the first enabled PDCH will be used. Beside the
throughput this will also limit the number of TBFs:
- number of UL TBFs <= 7
- number of DL TBFs <= 32
This commit changes the allocation algorithm to use the PDCH with the
least number of attached TBFs. This will improve the troughput in
both directions and the UL limits:
- number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs
Ticket: #1794
Sponsored-by: On-Waves ehf
To avoid the need for a switch or conditional statement when needing
a TBF from an MS object in direction independant code, this method
contains that case distinction. For additional flexibility, a
reverse() function is added to get the opposite direction.
Sponsored-by: On-Waves ehf
Currently the PDCH object do not know anything about the TBFs using
them. To make the slot allocation load dependant, at least some
numbers are required.
This commit adds TBF counters (one per direction) and the related methods
attach_tbf, detach_tbf, and num_tbfs to gprs_rlcmac_pdch.
Sponsored-by: On-Waves ehf
Currently the MS object are created when the TLLI gets known.
Therefore some information (TA, MS class) must be stored in the TBF
itself and is copied to the MS object later on. This would get even
more complex, if the allocation algorithms were extended based on
this scheme.
This commit ensures, that an MS object will always be created on TBF
allocation, even if the TLLI is not yet known. These 'anonymous'
objects are still managed by the MS storage. To avoid dangling
entries without a TLLI there (which cannnot be retrieved anyway), the
timer in the MS objects is not started after all TBF have been
detached, so that they get deleted immediately in that case.
Note that an MS object can still be removed (e.g. by replacement)
from an existing TBF, so tbf->ms() can be NULL.
Ticket: #1794
Sponsored-by: On-Waves ehf
Currently the old TBF (either uplink or downlink) is passed around at
TBF allocation mainly to get information about the MS. To implement
more complex allocation algorithms, the MS object itself will be
needed anyway.
This commit replaces the old_tbf arguments by MS object arguments.
Sponsored-by: On-Waves ehf
This method does not do anything anymore, it's functionality has been
taken over by update_ms.
This commit removes gprs_rlcmac_tbf::update_tlli completely.
Sponsored-by: On-Waves ehf
When the MS is pinged with a longer interval, many packets get lost
even if the GprsMs object is kept. If the interval is above the time
where the DL TBF is in state FLOW (mainly influenced be the
dl-tbf-idle-time command), an new TBF must be requested via AGCH for
each ICMP PING message.
Currently the LLC frame containing the PING is immediately stored
in the TBF and gets lost, if TBF establishment fails for some reason.
This commit moves all calls to put_frame() to schedule_next_frame(),
where the data is moved from the LLC queue to the frame storage
within the TBF object. This method is only called from within
create_new_bsn() when the TBF is in the FLOW state and the frame is
going to be encoded immediately.
At all other places, where put_frame() has been called before, the
LLC message is just appended to the LLC queue in the GprsMs object.
This change effectively simplifies the related code parts, since
date/len information and discard notifications is no longer needed
there.
Ticket: #1759
Sponsored-by: On-Waves ehf
Currently LLC frames are lost or even reordered when the TBF has be
established via the AGCH and the procedure fails for some reason.
This test tries to reproduce this behaviour by throwing away the
first TBF while calling the handle() method several times. The
results of create_dl_acked_block() are checked against expected
values (this is currently party disabled because the bug still
persists).
Ticket: #1759
Sponsored-by: On-Waves ehf
Currently only the RSSI value is passed to the upper layers. Other
values like TA and BER which are needed for TA update respectively CS
selection are not propagated.
This commit introduces and passes a struct that contains a set of
measurement values.
Sponsored-by: On-Waves ehf
Currently the current CS value is stored in the cs field of
gprs_rlcmac_tbf and initialised when it is used the first time.
This commit adds separate fields for UL and DL CS values to the
GprsMs class and provides corresponding getter methods for GprsMs and
gprs_rlcmac_tbf.
Ticket: #1739
Sponsored-by: On-Waves ehf
The ms_class value is a property of the MS and thus belongs to the
GprsMs class. Nevertheless the MS object is created after the TLLI
gets known, so the value still has to be stored in the TBF initially.
This commit add the ms_class value to the GprsMs class and introduces
TBF accessor functions which either access that object or, if that is
not available, the value stored locally.
Ticket: #1674
Sponsored-by: On-Waves ehf
The TA value rather relates to an MS and not to a single TBF. So all
TBFs share the same TA value. Currently the TA value is stored per
TBF and eventually copied from an old TBF to a new one. It is in
general only passed with an RACH request when the TLLI and thus the
MS is not yet known.
This commit adds a TA member to the GprsMs class and uses that one
when the TBF is associated to an MS object. Since the TBF is not
always associated with an MS object (after RACH or when it has been
replaced by another TBF), the TA value is still stored in each TBF
and that value is used as long as no MS object is being associated.
Sponsored-by: On-Waves ehf
These tests cover the message exchange from receiving from the first
RACH request to the first data block when establishing an uplink TBF.
This will be used to check, whether TA and other values are passed to
an MS object correctly.
In addition, the RX RACH log message in rcv_rach is extended to
contain the single block fn.
Sponsored-by: On-Waves ehf
Currently a new TBF is chained to an existing older one, either of
the other direction (active or releasing) or of the same direction
(releasing). This does not work properly work if and uplink and a
downlink TBF are being established at the same time while an old TBF
is being released. In that case, one of them is thrown away and the
pending procedure is cancelled.
The chaining is no longer necessary since the GprsMs objects have
been introduced which keep track of the active TBFs.
This commit removes the TBF members m_new_tbf and m_old_tbf and the
related methods and code paths.
Note that a new TBF can replace an older TBF entry of the same
direction within an MS object when it is associated with an MS (e.g.
by TLLI or because it is assigned via another, already associated
TBF). In that case, the old TBF is no longer associated with an MS
object.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the DL TBF's TLLI are not set. This will have to change in
the future, when the m_new_tbf chaining is replaced by the usage of MS
object to group TBFs.
This commit just calls update_ms() on newly created TBFs. This
changes many of the lines written to stderr due to the TLLI change,
but doesn't change other aspects or messages beside creating and
destroying MS objects.
Sponsored-by: On-Waves ehf
This commit extends get_ms() to really compare the IMSI if it has
been given. Matching by TLLI has a higher precedence than matching by
IMSI.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the IMSI is stored in the TBFs. Since it directly refers to
an MS, it should rather be stored in an MS object.
This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs,
changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated
MS object, and adds getter and setter to GprsMs. Before changing the
IMSI of the associated MS object, assign_imsi() checks if there is
already another MS object with the same IMSI and eventually resets
the IMSI of that one. So using update_ms() and assign_imsi() ensures
that there are not two MS object entries is the storage with the
same TLLI or the same IMSI.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the generated IMSI contains blanks due to a missing '0'
flag in the corresponding snprintf statement. In addition, the buffer
is effectively limited to 15 bytes which is shorter than the
generated character sequence, such that the last character of the
IMSI is removed.
This patch fixes both issues. Since snprintf itself will add a
terminating \0 character, the whole buffer can be passed to snprintf.
Sponsored-by: On-Waves ehf
Currently the m_tlli member in GprsMs is set by the constructor,
circumventing the TLLI confirmation mechanism.
This commit replaces the get_or_create_ms() method by a create_ms()
method which takes the TLLI and the direction (UL or DL) as
parameters to select either set_tlli() or confirm_tlli(). The MS
object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is
extended to return the DL TLLI if both of the other TLLI are not set.
Note that create_ms() will not check whether an MS object with a
matching TLLI is already stored in the list, so it should only be
called after a corresponding get_ms() in general.
Sponsored-by: On-Waves ehf
Currently the TLLI is stored in each TBF. Since each MS is now
represented by a GprsMs object which takes care of TLLI updating,
and each TBF that has been associated with an TLLI also contains a
reference to a GprsMs object, per TBF TLLI handling is no longer
needed. Keeping all TBF m_tlli members up to date is complex and
doesn't currently work correctly in all circumstances.
This commit removes m_tlli and related members from the TBF class and
the tbf_by_tlli functions from the BTS class.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the MS will be searched based on the TLLI in resue_tbf().
Since the MS object is already known in the TBF when the TLLI is set,
it can just be passed to the new TBF.
This commit removes the call to update_ms() and just adds
new_tbf->set_ms(ms()) which will also work as expected if ms() == NULL.
Sponsored-by: On-Waves ehf
The type of the TBF update_ms() is being called on does not always
reflect whether the TLLI has been signaled by the MS or the SGSN.
This commit adds an additional parameter to tell the method, in which
direction the TLLI has been passed.
Sponsored-by: On-Waves ehf
According to the specification (GSM 04.08/24.008, 4.7.1.5) after a
new P-TMSI has been assigned, the old P-TMSI must be kept basically
until it has been used by both sides. Since the TLLI will be derived
from the P-TMSI, the old TLLI must also be kept until the new TLLI
has been used by both MS and SGSN.
This commit modifies the TLLI handling of GprsMs accordingly.
set_tlli() is only used with TLLIs derived from MS messages,
confirm_tlli() is used with TLLIs derived from messages received from
the SGSN. tlli() returns the value set by the MS. check_tlli()
matches each of the TLLI used by either MS or SGSN as well as the old
TLLI until it has been confirmed.
Sponsored-by: On-Waves ehf
To show the talloc report more easily, this commit adds a call to
talloc_report_full if the TALLOC_REPORT_FULL environment variable is
set (the value is ignored). Since the stderr output is checked by the
test suite, this feature is not enabled by default.
Sponsored-by: On-Waves ehf
This commit adds MS object creation and cleanup to the TBF related
code. MS objects are created when a TBF that has been "anonymous" so
far gets associated with a TLLI. When a TBF is replaced by another,
the old TBF is detached and the new one is attached to the MS. When
all TBFs have been detached, the MS object gets deleted.
The TBF related code should not call attach_tbf/detach_tbf directly
but use set_ms instead to make sure, that the references are updated
properly. GprsMs::detach_tbf also calls set_ms(NULL) on the detached
TBF object.
The MS object is not really used yet, the focus is still on object
creation, TBF association, and cleanup.
Ticket: #1674
Sponsored-by: On-Waves ehf
Currently the ul_tbf is used in its own declaration as an argument to
tbf_alloc_ul_tbf, where dl_tbf can be used instead and makes more
sense.
This commit uses dl_tbf instead of ul_tbf as old_tbf.
Addresses:
tbf/TbfTest.cpp:71:14: warning: ‘ul_tbf’ may be used uninitialized in
this function
Sponsored-by: On-Waves ehf
Currently the PCU silently discard LLC frames from the SGSN if a
DL TBF cannot be allocated.
This commit changes tbf_new_dl_assignment and reuse_tbf to send an
LLC discarded message to the SGSN in this case.
Ticket: #607
Sponsored-by: On-Waves ehf
If an MS wants to open a new UL TBF, it can either use (P)RACH or
request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF
becomes idle (LCC queue is empty but the TBF is kept open), there
aren't any Ack/Nack requests that can be used by the MS to ask for an
UL TBF, therefore it has to use the RACH. This leads to many RACH
requests even for a single HTTP transaction, so it takes some time to
retrieve even a simple web page.
This commit modifies the scheduler to regularly send Ack/Nack
requests on idle DL TBFs. It does so by extending the priority based
scheduling algorithm to have 5 priority levels (highest priority
first):
- Control block is pending
- High age (100%) threshold reached (-> request Ack/Nack)
- Data is waiting or there are pending Nacks
- Low age (200ms) threshold reached (-> request Ack/Nack)
- Pending Nacks that have been resent already
- None of the above (-> send DL dummy control block)
The 'age' refers to the time since since the last control block has
been sent on the TBF. This high age threshold is set to
dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming
for at least a poll (and TBF shutdown) after the TBF has expired and
to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms,
there will be a poll every 200ms and a final poll after
dl-tbf-idle-time. On high load, the interval between polls can get
higher, but the 'high age' poll should be in place.
This commit implements the scheduling with respect to GSM 44.060,
9.3.1a ("Delayed release of downlink TBF").
Ticket: #556
Sponsored-by: On-Waves ehf
Currently if append_data() is used when there is no LLC data in the DL TBF,
it will either call reuse_tbf() which in turn will call put_frame(),
or it will append the LLC message to the queue, even if the queue and
the frame buffer are empty. This only happens with the test case so
far, but this would change when idle DL TBFs are kept open for some
time. It results in empty LLC message being sent to the MS (see log
below).
This commit changes append_data to check for this case and to
eventually use put_frame() instead of appending the LLC data to the
queue.
Addresses:
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=FLOW) downlink (V(A)==0 ..
V(S)==0)
- Sending new block at BSN 0
-- Chunk with length 0 is less than remaining space (20): add length
header to to delimit LLC frame
Complete DL frame for TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=FLOW)len=0
- Dequeue next LLC for TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=FLOW)
(len=200)
Sponsored-by: On-Waves ehf
Currently fn and block_nr are not incremented correctly. In addition,
the comments around the sending of blocks are not accurate either.
This commit introduces the send_rlc_block helper function which takes
care of the increments, updates the comments to reflect what is
really happening, and adds assertion to verify at least some aspects
of what is now stated in the comments.
Sponsored-by: On-Waves ehf
Put the generic parts of test_tbf_final_ack into helper functions to
reduce the size of the test and to avoid too much code duplication
when creating new tests.
Sponsored-by: On-Waves ehf
Currently tbf->m_new_tbf may point to itself if no new TBF is
assigned. But this leads to additional logging messages, since the
code in set_new_tbf and tbf_free assumes, that a real new TBF is
assigned and generates log messages accordingly.
This commit adds checks to avoid those messages in the above case.
Sponsored-by: On-Waves ehf
Currently tbf_name() must not be used twice in a printf statement
with different TBFs, since the same baffer will be used for each.
This commit puts the text buffer into struct gprs_rlcmac_tbf to avoid
this problem.
Sponsored-by: On-Waves ehf
Currently if a 'new' TBF is freed before the 'old' one (where
old_tbf->m_new_tbf == new_tbf), the old_tbf->m_new_tbf is not cleared
and can be accessed later on. This can lead to inconsistencies or
segmentation faults.
This commit adds m_old_tbf which points back from new_tbf to old_pdf.
m_new_tbf and m_old_tbf are either both set to NULL or one is the
reverse pointer of the other (tbf->m_new_tbf->m_old_tbf == tbf and
tbf->m_old_tbf->m_new_tbf == tbf). It extends set_new_tbf and
tbf_free to update the pointee accordingly.
The TBF test is extended to check this invariant at several places.
Sponsored-by: On-Waves ehf
When new_tbf is freed before dl_tbf in test_tbf_final_ack, dl_tbf
still contains a pointer to it in m_new_tbf.
This patch changes the test to accept a test mode parameter and runs
it twice which a different order of tbf_free in each run. Consistency
checks are added, to check for a danglilng m_new_tbf pointer in both
cases.
Sponsored-by: On-Waves ehf
The test called the llc enqueue() function directly which didn't take
care of prepending the tv values for the timeout to the data.
Now the test uses dl_tbf.append() which takes care of prepending the tv
values. With this patch make distcheck on jenkins should no longer fail
with "Discarding LLC PDU because lifetime limit reached." messages.
UL and DL tbfs are used in very separate parts and are not the same
thing so split the alloc function and use the UL/DL version throughout
the code.
Ticket: SYS#389
Sponsored-by: On-Waves ehf
During a routing area update a new P-TMSI was assigned. During
the PACKET CONTROL ACK on the DL we notice the change of TLLI
but didn't propagate this. This means that a Routing Area Update
Complete was only sent after a new RACH request.
Addresses:
<0007> gprs_rlcmac_meas.cpp:103 UL RSSI of TLLI=0x88661bc6: -67 dBm
<0002> bts.cpp:945 Got ACK, but UL TBF is gone TLLI=0xe512eba3
<0007> gprs_rlcmac_meas.cpp:158 DL packet loss of IMSI=274080000004765 / TLLI=0xe512eba3: 0%
<0002> tbf.cpp:668 TBF TFI=0 TLLI=0x88661bc6 T3169 timeout during transsmission
<0002> tbf.cpp:690 - Assignment was on PACCH
<0002> tbf.cpp:694 - No uplink data received yet
Max
Harald Welte
Neels Hofmeyr
Philipp Maier
Daniel Willmann