cellular-infrastructure
/
osmo-pcu
mirror of https://gerrit.osmocom.org/osmo-pcu
9
0
Fork 1
Code Issues Releases Wiki Activity
osmo-pcu/tests/tbf/TbfTest.err

7911 lines
656 KiB
Plaintext
Raw Normal View History

TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=0/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
TbfTest: Make logging more verbose Sponsored-by: On-Waves ehf
2014-06-11 16:33:14 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Skipping TS 3, because num TBFs 0 >= 0
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=2 TFI=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 2, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 2
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 04, dl_slots = 04
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0x00002342, partly confirmed
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00002342, TA 220 -> 4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
TbfTest: Make logging more verbose Sponsored-by: On-Waves ehf
2014-06-11 16:33:14 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
alloc: Base algo A on reserved PDCHs Currently algorithm A bases its time slots selection on the number of TBF actively using the PDCHs. This statistically prefers the first time slots, especially with short living TBFs. So when the first TBF is triggered by an uplink transfer (which generally results in a short-lived TBF) the potentially longer living DL TBF will be bound to the same slot. When another MS then requests an uplink TBF, it will get the same slot (no UL TBF currently active). This commit changes the algorithm to base its selection on reserved slots instead. Sponsored-by: On-Waves ehf
2015-06-30 08:24:37 +00:00
- Skipping TS 3, because need to reuse TS
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign uplink TS=2 TFI=0 USF=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 2, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 2
tbf: Remove the TLLI from the TBFs Currently the TLLI is stored in each TBF. Since each MS is now represented by a GprsMs object which takes care of TLLI updating, and each TBF that has been associated with an TLLI also contains a reference to a GprsMs object, per TBF TLLI handling is no longer needed. Keeping all TBF m_tlli members up to date is complex and doesn't currently work correctly in all circumstances. This commit removes m_tlli and related members from the TBF class and the tbf_by_tlli functions from the BTS class. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-20 10:06:46 +00:00
Attaching TBF to MS object, TLLI = 0x00002342, TBF = TBF(TFI=0 TLLI=0x00002342 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00002342 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 04, dl_slots = 00
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
Modifying MS object, TLLI: 0x00000000 -> 0x00002342, already confirmed partly
ms: Support new and old TLLIs According to the specification (GSM 04.08/24.008, 4.7.1.5) after a new P-TMSI has been assigned, the old P-TMSI must be kept basically until it has been used by both sides. Since the TLLI will be derived from the P-TMSI, the old TLLI must also be kept until the new TLLI has been used by both MS and SGSN. This commit modifies the TLLI handling of GprsMs accordingly. set_tlli() is only used with TLLIs derived from MS messages, confirm_tlli() is used with TLLIs derived from messages received from the SGSN. tlli() returns the value set by the MS. check_tlli() matches each of the TLLI used by either MS or SGSN as well as the old TLLI until it has been confirmed. Sponsored-by: On-Waves ehf
2015-05-15 13:50:43 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0x00004232, partly confirmed
Modifying MS object, TLLI: 0x00002342 -> 0x00004232, already confirmed partly
tbf: Store the timing advance (TA) value in the GprsMs object The TA value rather relates to an MS and not to a single TBF. So all TBFs share the same TA value. Currently the TA value is stored per TBF and eventually copied from an old TBF to a new one. It is in general only passed with an RACH request when the TLLI and thus the MS is not yet known. This commit adds a TA member to the GprsMs class and uses that one when the TBF is associated to an MS object. Since the TBF is not always associated with an MS object (after RACH or when it has been replaced by another TBF), the TA value is still stored in each TBF and that value is used as long as no MS object is being associated. Sponsored-by: On-Waves ehf
2015-05-22 15:48:04 +00:00
Modifying MS object, TLLI = 0x00004232, TA 4 -> 6
tbf: Put the TFI->TBF mapping into the PDCH objects Currently the TBFs are registered in a TFI indexed array within the TRX objects. TBFs can be searched globally by TFI and TRX number. This conflicts with the use of the same TFI for different TBF on different PDCH. This use case requires the specification of the PDCH as additional search dimension. This commit moves the TFI index TBF arrays into the PDCH objects. The related methods are updated accordingly. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 17:52:37 +00:00
Searching for first unallocated TFI: TRX=0
tests/tbf: Test for final ack issue Ticket: SYS#382 Sponsored-by: On-Waves ehf
2014-08-15 16:19:41 +00:00
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tests/tbf: Test for final ack issue Ticket: SYS#382 Sponsored-by: On-Waves ehf
2014-08-15 16:19:41 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes state from NULL to FLOW
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) appending 200 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) appending 200 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) (TRX=0, TS=4)
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 0, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Dequeue next LLC (len=200)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 0, CS-1): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 0, CS-1): 07 00 01 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW)
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 1, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 1, CS-1): 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 1, CS-1): 07 00 03 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tests/tbf: Test for final ack issue Ticket: SYS#382 Sponsored-by: On-Waves ehf
2014-08-15 16:19:41 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=1
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL), 2 TBFs, USFs = 00, TFIs = 00000003.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
Attaching TBF to MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) Trigger downlink assignment on PACCH
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=NULL) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) exists
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=ASSIGN) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) stopping timer T3193 [freeing TBF]
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING), 1 TBFs, USFs = 00, TFIs = 00000002.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=ASSIGN) changes state from ASSIGN to RELEASING
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) free
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) stopping timer T0 [freeing TBF]
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=RELEASING)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf: Remove TBF chaining (m_new_tbf and m_old_tbf) Currently a new TBF is chained to an existing older one, either of the other direction (active or releasing) or of the same direction (releasing). This does not work properly work if and uplink and a downlink TBF are being established at the same time while an old TBF is being released. In that case, one of them is thrown away and the pending procedure is cancelled. The chaining is no longer necessary since the GprsMs objects have been introduced which keep track of the active TBFs. This commit removes the TBF members m_new_tbf and m_old_tbf and the related methods and code paths. Note that a new TBF can replace an older TBF entry of the same direction within an MS object when it is associated with an MS (e.g. by TLLI or because it is assigned via another, already associated TBF). In that case, the old TBF is no longer associated with an MS object. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-22 13:47:55 +00:00
Destroying MS object, TLLI = 0xffeeddcc
tbf: Put the TFI->TBF mapping into the PDCH objects Currently the TBFs are registered in a TFI indexed array within the TRX objects. TBFs can be searched globally by TFI and TRX number. This conflicts with the use of the same TFI for different TBF on different PDCH. This use case requires the specification of the PDCH as additional search dimension. This commit moves the TFI index TBF arrays into the PDCH objects. The related methods are updated accordingly. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 17:52:37 +00:00
Searching for first unallocated TFI: TRX=0
tbf/test: Modify test to create a dangling TBF pointer When new_tbf is freed before dl_tbf in test_tbf_final_ack, dl_tbf still contains a pointer to it in m_new_tbf. This patch changes the test to accept a test mode parameter and runs it twice which a different order of tbf_free in each run. Consistency checks are added, to check for a danglilng m_new_tbf pointer in both cases. Sponsored-by: On-Waves ehf
2015-02-23 13:26:59 +00:00
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Modify test to create a dangling TBF pointer When new_tbf is freed before dl_tbf in test_tbf_final_ack, dl_tbf still contains a pointer to it in m_new_tbf. This patch changes the test to accept a test mode parameter and runs it twice which a different order of tbf_free in each run. Consistency checks are added, to check for a danglilng m_new_tbf pointer in both cases. Sponsored-by: On-Waves ehf
2015-02-23 13:26:59 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes state from NULL to FLOW
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) appending 200 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) appending 200 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) (TRX=0, TS=4)
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 0, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Dequeue next LLC (len=200)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 0, CS-1): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 0, CS-1): 07 00 01 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW)
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 1, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 1, CS-1): 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 1, CS-1): 07 00 03 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf/test: Modify test to create a dangling TBF pointer When new_tbf is freed before dl_tbf in test_tbf_final_ack, dl_tbf still contains a pointer to it in m_new_tbf. This patch changes the test to accept a test mode parameter and runs it twice which a different order of tbf_free in each run. Consistency checks are added, to check for a danglilng m_new_tbf pointer in both cases. Sponsored-by: On-Waves ehf
2015-02-23 13:26:59 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=1
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL), 2 TBFs, USFs = 00, TFIs = 00000003.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
Attaching TBF to MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) Trigger downlink assignment on PACCH
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=NULL) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) exists
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=ASSIGN) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=ASSIGN) changes state from ASSIGN to RELEASING
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) free
TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) stopping timer T0 [freeing TBF]
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=RELEASING), 1 TBFs, USFs = 00, TFIs = 00000001.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=1 TLLI=0xffeeddcc DIR=DL STATE=RELEASING)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) stopping timer T3193 [freeing TBF]
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf: Remove TBF chaining (m_new_tbf and m_old_tbf) Currently a new TBF is chained to an existing older one, either of the other direction (active or releasing) or of the same direction (releasing). This does not work properly work if and uplink and a downlink TBF are being established at the same time while an old TBF is being released. In that case, one of them is thrown away and the pending procedure is cancelled. The chaining is no longer necessary since the GprsMs objects have been introduced which keep track of the active TBFs. This commit removes the TBF members m_new_tbf and m_old_tbf and the related methods and code paths. Note that a new TBF can replace an older TBF entry of the same direction within an MS object when it is associated with an MS (e.g. by TLLI or because it is assigned via another, already associated TBF). In that case, the old TBF is no longer associated with an MS object. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-22 13:47:55 +00:00
Destroying MS object, TLLI = 0xffeeddcc
tbf: Put the TFI->TBF mapping into the PDCH objects Currently the TBFs are registered in a TFI indexed array within the TRX objects. TBFs can be searched globally by TFI and TRX number. This conflicts with the use of the same TFI for different TBF on different PDCH. This use case requires the specification of the PDCH as additional search dimension. This commit moves the TFI index TBF arrays into the PDCH objects. The related methods are updated accordingly. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 17:52:37 +00:00
Searching for first unallocated TFI: TRX=0
tbf/test: Add test for delayed release This tests checks the implementation of the delayed release of an downlink TBF. Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-25 09:48:52 +00:00
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for delayed release This tests checks the implementation of the delayed release of an downlink TBF. Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-25 09:48:52 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes state from NULL to FLOW
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) appending 200 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) appending 200 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) (TRX=0, TS=4)
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 0, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Dequeue next LLC (len=200)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 0, CS-1): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 0, CS-1): 07 00 01 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW)
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 1, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 1, CS-1): 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 1, CS-1): 07 00 03 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 2, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 2, CS-1): 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 2, CS-1): 07 00 05 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 3, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 3, CS-1): 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 3 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 3, CS-1): 07 00 07 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 4, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 4, CS-1): 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 61 62 63
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 4, CS-1): 07 00 09 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 61 62 63
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 5, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 5, CS-1): 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f 70 71 72 73 74 75 76 77
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 5 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 5, CS-1): 07 00 0b 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f 70 71 72 73 74 75 76 77
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 6, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 6, CS-1): 78 79 7a 7b 7c 7d 7e 7f 80 81 82 83 84 85 86 87 88 89 8a 8b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 6, CS-1): 07 00 0d 78 79 7a 7b 7c 7d 7e 7f 80 81 82 83 84 85 86 87 88 89 8a 8b
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 7, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 7, CS-1): 8c 8d 8e 8f 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 7 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 7, CS-1): 07 00 0f 8c 8d 8e 8f 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 8, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 8, CS-1): a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af b0 b1 b2 b3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 8, CS-1): 07 00 11 a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af b0 b1 b2 b3
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 9, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 9, CS-1): 01 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5 c6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 9 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 9, CS-1): 07 00 12 01 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5 c6
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 10, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Complete DL frame, len=200
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Dequeue next LLC (len=200)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 10, CS-1): 07 c7 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 10 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 10, CS-1): 07 00 14 07 c7 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 11, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 11, CS-1): 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 11 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 11, CS-1): 07 00 17 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 12, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 12, CS-1): 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 12 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 12, CS-1): 07 00 19 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==13)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 13, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 13, CS-1): 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 13 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 13)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 13, CS-1): 07 00 1b 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==14)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 14, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 14, CS-1): 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 61
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 14 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 14)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 14, CS-1): 07 00 1d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 61
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==15)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 15, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 15, CS-1): 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f 70 71 72 73 74 75
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 15 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 15)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 15, CS-1): 07 00 1f 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f 70 71 72 73 74 75
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==16)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 16, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 16, CS-1): 76 77 78 79 7a 7b 7c 7d 7e 7f 80 81 82 83 84 85 86 87 88 89
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 16 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 16)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 16, CS-1): 07 00 21 76 77 78 79 7a 7b 7c 7d 7e 7f 80 81 82 83 84 85 86 87 88 89
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==17)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 17, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 17, CS-1): 8a 8b 8c 8d 8e 8f 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 17 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 17)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 17, CS-1): 07 00 23 8a 8b 8c 8d 8e 8f 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==18)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 18, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 18, CS-1): 9e 9f a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af b0 b1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 18 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 18)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 18, CS-1): 07 00 25 9e 9f a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af b0 b1
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==19)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 19, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 19, CS-1): b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 19 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 19)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 19, CS-1): 07 00 27 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==20)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new block at BSN 20, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Complete DL frame, len=200
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Empty chunk, added LLC dummy command of size 16, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Complete DL frame, len=16
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 20, CS-1): 0a 41 c6 c7 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 20 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 20)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 20, CS-1): 07 00 28 0a 41 c6 c7 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) ack: (BSN=85)"RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR"(BSN=20) R=ACK I=NACK
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) DL analysis, range=0:21, lost=0, recv=21, skipped=0, bsn=0, info='RRRRRRRRRRRRRRRRRRRRR...........................................'
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) V(B): (V(A)=21)""(V(S)-1=20) A=Acked N=Nacked U=Unacked X=Resend-Unacked I=Invalid
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==21 .. V(S)==21)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new dummy block at BSN 21, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Empty chunk, added LLC dummy command of size 19, drained_since=4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Complete DL frame, len=19
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) data block (BSN 21, CS-1): 4d 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 21 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Copying data unit 0 (BSN 21)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) msg block (BSN 21, CS-1): 07 00 2a 4d 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) ack: (BSN=86)"RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR"(BSN=21) R=ACK I=NACK
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) DL analysis, range=21:22, lost=0, recv=1, skipped=0, bsn=21, info='R...............................................................'
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) V(B): (V(A)=22)""(V(S)-1=21) A=Acked N=Nacked U=Unacked X=Resend-Unacked I=Invalid
tbf: Poll MS on idle DL TBFs If an MS wants to open a new UL TBF, it can either use (P)RACH or request one in a Ack/Nack message for a DL TBF (PACCH). When a TBF becomes idle (LCC queue is empty but the TBF is kept open), there aren't any Ack/Nack requests that can be used by the MS to ask for an UL TBF, therefore it has to use the RACH. This leads to many RACH requests even for a single HTTP transaction, so it takes some time to retrieve even a simple web page. This commit modifies the scheduler to regularly send Ack/Nack requests on idle DL TBFs. It does so by extending the priority based scheduling algorithm to have 5 priority levels (highest priority first): - Control block is pending - High age (100%) threshold reached (-> request Ack/Nack) - Data is waiting or there are pending Nacks - Low age (200ms) threshold reached (-> request Ack/Nack) - Pending Nacks that have been resent already - None of the above (-> send DL dummy control block) The 'age' refers to the time since since the last control block has been sent on the TBF. This high age threshold is set to dl-tbf-idle-time or to 50% of T3190 (whichever is smaller), aiming for at least a poll (and TBF shutdown) after the TBF has expired and to safely prevent expiry of T3190. So if dl-tbf-idle-time > 200ms, there will be a poll every 200ms and a final poll after dl-tbf-idle-time. On high load, the interval between polls can get higher, but the 'high age' poll should be in place. This commit implements the scheduling with respect to GSM 44.060, 9.3.1a ("Delayed release of downlink TBF"). Ticket: #556 Sponsored-by: On-Waves ehf
2015-03-20 13:26:05 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) downlink (V(A)==22 .. V(S)==22)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Sending new dummy block at BSN 22, CS=CS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Empty chunk, added LLC dummy command of size 19, drained_since=112
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) Complete DL frame, len=19
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) changes state from FLOW to FINISHED
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) data block (BSN 22, CS-1): 4d 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) need_padding 0 spb_status 0 spb 0 (BSN1 22 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) Copying data unit 0 (BSN 22)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) msg block (BSN 22, CS-1): 07 01 2c 4d 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FINISHED) changes state from FINISHED to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING) stopping timer T3193 [freeing TBF]
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING)
tbf/test: Attach TLLI and MS objects to TBFs Currently the DL TBF's TLLI are not set. This will have to change in the future, when the m_new_tbf chaining is replaced by the usage of MS object to group TBFs. This commit just calls update_ms() on newly created TBFs. This changes many of the lines written to stderr due to the TLLI change, but doesn't change other aspects or messages beside creating and destroying MS objects. Sponsored-by: On-Waves ehf
2015-05-22 13:40:08 +00:00
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf: Put the TFI->TBF mapping into the PDCH objects Currently the TBFs are registered in a TFI indexed array within the TRX objects. TBFs can be searched globally by TFI and TRX number. This conflicts with the use of the same TFI for different TBF on different PDCH. This use case requires the specification of the PDCH as additional search dimension. This commit moves the TFI index TBF arrays into the PDCH objects. The related methods are updated accordingly. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 17:52:37 +00:00
Searching for first unallocated TFI: TRX=0
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes state from NULL to FLOW
tbf: Put the TFI->TBF mapping into the PDCH objects Currently the TBFs are registered in a TFI indexed array within the TRX objects. TBFs can be searched globally by TFI and TRX number. This conflicts with the use of the same TFI for different TBF on different PDCH. This use case requires the specification of the PDCH as additional search dimension. This commit moves the TFI index TBF arrays into the PDCH objects. The related methods are updated accordingly. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 17:52:37 +00:00
Searching for first unallocated TFI: TRX=0
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Found TFI=1.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=1
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL), 2 TBFs, USFs = 00, TFIs = 00000003.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) changes state from NULL to FLOW
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xf1000001, partly confirmed
The MS object cannot fully confirm an unexpected TLLI: 0xf1000002, partly confirmed
Modifying MS object, TLLI = 0xf1000001, IMSI '' -> '001001000000001'
Modifying MS object, TLLI = 0xf1000001, IMSI '001001000000001' -> '001001000000002'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1000002 DIR=DL STATE=FLOW) IMSI '001001000000002' was already assigned to another MS object: TLLI = 0xf1000001, that IMSI will be removed
TBF(TFI=0 TLLI=0xf1000001 DIR=DL STATE=FLOW) changes state from FLOW to RELEASING
TBF(TFI=0 TLLI=0xf1000001 DIR=DL STATE=RELEASING) free
TBF(TFI=0 TLLI=0xf1000001 DIR=DL STATE=RELEASING) FIXME: Software error: Pending downlink assignment in state GPRS_RLCMAC_DL_ASS_SEND_ASS. This may not happen, because the assignment message never gets transmitted. Please be sure not to free in this state. PLEASE FIX!
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xf1000001 DIR=DL STATE=RELEASING), 1 TBFs, USFs = 00, TFIs = 00000002.
Detaching TBF from MS object, TLLI = 0xf1000001, TBF = TBF(TFI=0 TLLI=0xf1000001 DIR=DL STATE=RELEASING)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
ms: Move MS information merging to GprsMS Currently the merging of the meta information (MS class, IMSI) takes place in gprs_rlcmac_tbf::merge_and_clear_ms(). This makes it difficult to merge the internal state and does not directly relate to TBFs anyway. This commit moves this into a new method GprsMs::merge_old_ms. Sponsored-by: On-Waves ehf
2015-08-18 09:55:03 +00:00
Modifying MS object, TLLI = 0xf1000002, IMSI '' -> '001001000000002'
Clearing MS object, TLLI: 0xf1000001, IMSI: '001001000000002'
tbf: Clean old MS objects if they have the same TLLI Currently if an MS retries to access the PCU by using RACH and if there is already an entry for that MS, a duplicated MS object referring to the same TLLI is created. This is caused by blindly setting the TLLI without querying the MS storage to avoid inconsitencies. This leads to several entries in the MS storage that are assigned to the same TLLI. If that happens, 'show ms all' can display multiple entries with the same TLLI (note that an MS object can belong to several TLLIs, so there might be an intersection that is not visible in the list) or 'show tbf all' can show entries with MS_CLASS == 0 in some cases. This commit changes update_ms() to merge and clean up old entries that belong to the given TLLI if they exist. Some data (like the MS class) is copied to the new MS object. Note that TBF belonging to the old MS object are deleted immediately if they have not registered a timer. Sponsored-by: On-Waves ehf
2015-08-16 16:19:32 +00:00
Destroying MS object, TLLI = 0x00000000
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1000002 DIR=DL STATE=FLOW) changes state from FLOW to RELEASING
TBF(TFI=1 TLLI=0xf1000002 DIR=DL STATE=RELEASING) free
TBF(TFI=1 TLLI=0xf1000002 DIR=DL STATE=RELEASING) FIXME: Software error: Pending downlink assignment in state GPRS_RLCMAC_DL_ASS_SEND_ASS. This may not happen, because the assignment message never gets transmitted. Please be sure not to free in this state. PLEASE FIX!
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=1 TLLI=0xf1000002 DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xf1000002, TBF = TBF(TFI=1 TLLI=0xf1000002 DIR=DL STATE=RELEASING)
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Destroying MS object, TLLI = 0xf1000002
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000000, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0000000 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000000, IMSI '' -> '001001000000000'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0000000 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000000)
TBF(TFI=0 TLLI=0xc0000000 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xc0000000 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0000000 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=1
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL), 2 TBFs, USFs = 00, TFIs = 00000003.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000001, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xc0000001 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000001, IMSI '' -> '001001000000001'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xc0000001 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000001)
TBF(TFI=1 TLLI=0xc0000001 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=1 TLLI=0xc0000001 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xc0000001 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=2
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=2 TLLI=0x00000000 DIR=DL STATE=NULL), 3 TBFs, USFs = 00, TFIs = 00000007.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=2 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000002, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0xc0000002 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000002, IMSI '' -> '001001000000002'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0xc0000002 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000002)
TBF(TFI=2 TLLI=0xc0000002 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=2 TLLI=0xc0000002 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0xc0000002 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=3
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=3 TLLI=0x00000000 DIR=DL STATE=NULL), 4 TBFs, USFs = 00, TFIs = 0000000f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=3 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000003, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0xc0000003 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000003, IMSI '' -> '001001000000003'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0xc0000003 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000003)
TBF(TFI=3 TLLI=0xc0000003 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=3 TLLI=0xc0000003 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0xc0000003 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=4
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=4 TLLI=0x00000000 DIR=DL STATE=NULL), 5 TBFs, USFs = 00, TFIs = 0000001f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=4 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000004, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0xc0000004 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000004, IMSI '' -> '001001000000004'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0xc0000004 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000004)
TBF(TFI=4 TLLI=0xc0000004 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=4 TLLI=0xc0000004 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0xc0000004 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=5
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=5 TLLI=0x00000000 DIR=DL STATE=NULL), 6 TBFs, USFs = 00, TFIs = 0000003f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=5 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000005, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0xc0000005 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000005, IMSI '' -> '001001000000005'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0xc0000005 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000005)
TBF(TFI=5 TLLI=0xc0000005 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=5 TLLI=0xc0000005 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0xc0000005 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=6
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=6 TLLI=0x00000000 DIR=DL STATE=NULL), 7 TBFs, USFs = 00, TFIs = 0000007f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=6 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000006, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0xc0000006 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000006, IMSI '' -> '001001000000006'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0xc0000006 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000006)
TBF(TFI=6 TLLI=0xc0000006 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=6 TLLI=0xc0000006 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0xc0000006 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=7
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=7 TLLI=0x00000000 DIR=DL STATE=NULL), 8 TBFs, USFs = 00, TFIs = 000000ff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=7 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=7 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=7 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000007, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=7 TLLI=0xc0000007 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000007, IMSI '' -> '001001000000007'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=7 TLLI=0xc0000007 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000007)
TBF(TFI=7 TLLI=0xc0000007 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=7 TLLI=0xc0000007 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=7 TLLI=0xc0000007 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=8
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=8 TLLI=0x00000000 DIR=DL STATE=NULL), 9 TBFs, USFs = 00, TFIs = 000001ff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=8 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=8 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=8 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000008, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=8 TLLI=0xc0000008 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000008, IMSI '' -> '001001000000008'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=8 TLLI=0xc0000008 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000008)
TBF(TFI=8 TLLI=0xc0000008 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=8 TLLI=0xc0000008 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=8 TLLI=0xc0000008 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=9
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=9 TLLI=0x00000000 DIR=DL STATE=NULL), 10 TBFs, USFs = 00, TFIs = 000003ff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=9 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=9 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=9 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000009, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=9 TLLI=0xc0000009 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000009, IMSI '' -> '001001000000009'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=9 TLLI=0xc0000009 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000009)
TBF(TFI=9 TLLI=0xc0000009 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=9 TLLI=0xc0000009 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=9 TLLI=0xc0000009 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=10
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=10 TLLI=0x00000000 DIR=DL STATE=NULL), 11 TBFs, USFs = 00, TFIs = 000007ff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=10 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=10 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=10 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000000a, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=10 TLLI=0xc000000a DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000000a, IMSI '' -> '001001000000010'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=10 TLLI=0xc000000a DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000010)
TBF(TFI=10 TLLI=0xc000000a DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=10 TLLI=0xc000000a DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=10 TLLI=0xc000000a DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=11
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=11 TLLI=0x00000000 DIR=DL STATE=NULL), 12 TBFs, USFs = 00, TFIs = 00000fff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=11 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=11 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=11 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000000b, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=11 TLLI=0xc000000b DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000000b, IMSI '' -> '001001000000011'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=11 TLLI=0xc000000b DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000011)
TBF(TFI=11 TLLI=0xc000000b DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=11 TLLI=0xc000000b DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=11 TLLI=0xc000000b DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=12
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=12 TLLI=0x00000000 DIR=DL STATE=NULL), 13 TBFs, USFs = 00, TFIs = 00001fff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=12 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=12 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=12 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000000c, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=12 TLLI=0xc000000c DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000000c, IMSI '' -> '001001000000012'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=12 TLLI=0xc000000c DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000012)
TBF(TFI=12 TLLI=0xc000000c DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=12 TLLI=0xc000000c DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=12 TLLI=0xc000000c DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=13
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=13 TLLI=0x00000000 DIR=DL STATE=NULL), 14 TBFs, USFs = 00, TFIs = 00003fff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=13 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=13 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=13 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000000d, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=13 TLLI=0xc000000d DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000000d, IMSI '' -> '001001000000013'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=13 TLLI=0xc000000d DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000013)
TBF(TFI=13 TLLI=0xc000000d DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=13 TLLI=0xc000000d DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=13 TLLI=0xc000000d DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=14
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=14 TLLI=0x00000000 DIR=DL STATE=NULL), 15 TBFs, USFs = 00, TFIs = 00007fff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=14 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=14 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=14 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000000e, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=14 TLLI=0xc000000e DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000000e, IMSI '' -> '001001000000014'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=14 TLLI=0xc000000e DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000014)
TBF(TFI=14 TLLI=0xc000000e DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=14 TLLI=0xc000000e DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=14 TLLI=0xc000000e DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=15
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=15 TLLI=0x00000000 DIR=DL STATE=NULL), 16 TBFs, USFs = 00, TFIs = 0000ffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=15 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=15 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=15 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000000f, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=15 TLLI=0xc000000f DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000000f, IMSI '' -> '001001000000015'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=15 TLLI=0xc000000f DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000015)
TBF(TFI=15 TLLI=0xc000000f DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=15 TLLI=0xc000000f DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=15 TLLI=0xc000000f DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=16
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=16 TLLI=0x00000000 DIR=DL STATE=NULL), 17 TBFs, USFs = 00, TFIs = 0001ffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=16 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=16 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=16 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000010, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=16 TLLI=0xc0000010 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000010, IMSI '' -> '001001000000016'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=16 TLLI=0xc0000010 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000016)
TBF(TFI=16 TLLI=0xc0000010 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=16 TLLI=0xc0000010 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=16 TLLI=0xc0000010 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=17
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=17 TLLI=0x00000000 DIR=DL STATE=NULL), 18 TBFs, USFs = 00, TFIs = 0003ffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=17 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=17 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=17 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000011, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=17 TLLI=0xc0000011 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000011, IMSI '' -> '001001000000017'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=17 TLLI=0xc0000011 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000017)
TBF(TFI=17 TLLI=0xc0000011 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=17 TLLI=0xc0000011 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=17 TLLI=0xc0000011 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=18
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=18 TLLI=0x00000000 DIR=DL STATE=NULL), 19 TBFs, USFs = 00, TFIs = 0007ffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=18 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=18 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=18 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000012, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=18 TLLI=0xc0000012 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000012, IMSI '' -> '001001000000018'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=18 TLLI=0xc0000012 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000018)
TBF(TFI=18 TLLI=0xc0000012 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=18 TLLI=0xc0000012 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=18 TLLI=0xc0000012 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=19
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=19 TLLI=0x00000000 DIR=DL STATE=NULL), 20 TBFs, USFs = 00, TFIs = 000fffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=19 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=19 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=19 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000013, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=19 TLLI=0xc0000013 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000013, IMSI '' -> '001001000000019'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=19 TLLI=0xc0000013 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000019)
TBF(TFI=19 TLLI=0xc0000013 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=19 TLLI=0xc0000013 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=19 TLLI=0xc0000013 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=20
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=20 TLLI=0x00000000 DIR=DL STATE=NULL), 21 TBFs, USFs = 00, TFIs = 001fffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=20 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=20 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=20 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000014, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=20 TLLI=0xc0000014 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000014, IMSI '' -> '001001000000020'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=20 TLLI=0xc0000014 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000020)
TBF(TFI=20 TLLI=0xc0000014 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=20 TLLI=0xc0000014 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=20 TLLI=0xc0000014 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=21
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=21 TLLI=0x00000000 DIR=DL STATE=NULL), 22 TBFs, USFs = 00, TFIs = 003fffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=21 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=21 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=21 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000015, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=21 TLLI=0xc0000015 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000015, IMSI '' -> '001001000000021'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=21 TLLI=0xc0000015 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000021)
TBF(TFI=21 TLLI=0xc0000015 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=21 TLLI=0xc0000015 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=21 TLLI=0xc0000015 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=22
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=22 TLLI=0x00000000 DIR=DL STATE=NULL), 23 TBFs, USFs = 00, TFIs = 007fffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=22 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=22 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=22 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000016, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=22 TLLI=0xc0000016 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000016, IMSI '' -> '001001000000022'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=22 TLLI=0xc0000016 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000022)
TBF(TFI=22 TLLI=0xc0000016 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=22 TLLI=0xc0000016 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=22 TLLI=0xc0000016 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=23
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=23 TLLI=0x00000000 DIR=DL STATE=NULL), 24 TBFs, USFs = 00, TFIs = 00ffffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=23 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=23 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=23 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000017, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=23 TLLI=0xc0000017 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000017, IMSI '' -> '001001000000023'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=23 TLLI=0xc0000017 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000023)
TBF(TFI=23 TLLI=0xc0000017 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=23 TLLI=0xc0000017 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=23 TLLI=0xc0000017 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=24
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=24 TLLI=0x00000000 DIR=DL STATE=NULL), 25 TBFs, USFs = 00, TFIs = 01ffffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=24 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=24 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=24 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000018, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=24 TLLI=0xc0000018 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000018, IMSI '' -> '001001000000024'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=24 TLLI=0xc0000018 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000024)
TBF(TFI=24 TLLI=0xc0000018 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=24 TLLI=0xc0000018 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=24 TLLI=0xc0000018 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=25
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL), 26 TBFs, USFs = 00, TFIs = 03ffffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0000019, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=25 TLLI=0xc0000019 DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc0000019, IMSI '' -> '001001000000025'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=25 TLLI=0xc0000019 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000025)
TBF(TFI=25 TLLI=0xc0000019 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=25 TLLI=0xc0000019 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=25 TLLI=0xc0000019 DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=26
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL), 27 TBFs, USFs = 00, TFIs = 07ffffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000001a, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=26 TLLI=0xc000001a DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000001a, IMSI '' -> '001001000000026'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=26 TLLI=0xc000001a DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000026)
TBF(TFI=26 TLLI=0xc000001a DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=26 TLLI=0xc000001a DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=26 TLLI=0xc000001a DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=27
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL), 28 TBFs, USFs = 00, TFIs = 0fffffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000001b, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=27 TLLI=0xc000001b DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000001b, IMSI '' -> '001001000000027'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=27 TLLI=0xc000001b DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000027)
TBF(TFI=27 TLLI=0xc000001b DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=27 TLLI=0xc000001b DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=27 TLLI=0xc000001b DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=28
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL), 29 TBFs, USFs = 00, TFIs = 1fffffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000001c, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=28 TLLI=0xc000001c DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000001c, IMSI '' -> '001001000000028'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=28 TLLI=0xc000001c DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000028)
TBF(TFI=28 TLLI=0xc000001c DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=28 TLLI=0xc000001c DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=28 TLLI=0xc000001c DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=29
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL), 30 TBFs, USFs = 00, TFIs = 3fffffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000001d, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=29 TLLI=0xc000001d DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000001d, IMSI '' -> '001001000000029'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=29 TLLI=0xc000001d DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000029)
TBF(TFI=29 TLLI=0xc000001d DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=29 TLLI=0xc000001d DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=29 TLLI=0xc000001d DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=30
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL), 31 TBFs, USFs = 00, TFIs = 7fffffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000001e, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=30 TLLI=0xc000001e DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000001e, IMSI '' -> '001001000000030'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=30 TLLI=0xc000001e DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000030)
TBF(TFI=30 TLLI=0xc000001e DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=30 TLLI=0xc000001e DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=30 TLLI=0xc000001e DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL TBF exhaustion This test calls gprs_rlcmac_dl_tbf::handle() with varying TLLI and IMSI until the function fails. Sponsored-by: On-Waves ehf
2015-04-09 17:17:21 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=31
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL), 32 TBFs, USFs = 00, TFIs = ffffffff.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf: Always call set_tlli/confirm_tlli in update_ms Currently the m_tlli member in GprsMs is set by the constructor, circumventing the TLLI confirmation mechanism. This commit replaces the get_or_create_ms() method by a create_ms() method which takes the TLLI and the direction (UL or DL) as parameters to select either set_tlli() or confirm_tlli(). The MS object is instantiated with TLLI = 0, and therefore GprsMs::tlli() is extended to return the DL TLLI if both of the other TLLI are not set. Note that create_ms() will not check whether an MS object with a matching TLLI is already stored in the list, so it should only be called after a corresponding get_ms() in general. Sponsored-by: On-Waves ehf
2015-05-21 14:58:22 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc000001f, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=31 TLLI=0xc000001f DIR=DL STATE=NULL) [DOWNLINK] START
tbf: Move IMSI to MS object Currently the IMSI is stored in the TBFs. Since it directly refers to an MS, it should rather be stored in an MS object. This patch move the m_imsi field from gprs_rlcmac_tbf to GprsMs, changes gprs_rlcmac_tbf::imsi() to get the IMSI from the associated MS object, and adds getter and setter to GprsMs. Before changing the IMSI of the associated MS object, assign_imsi() checks if there is already another MS object with the same IMSI and eventually resets the IMSI of that one. So using update_ms() and assign_imsi() ensures that there are not two MS object entries is the storage with the same TLLI or the same IMSI. Ticket: #1674 Sponsored-by: On-Waves ehf
2015-05-21 09:07:16 +00:00
Modifying MS object, TLLI = 0xc000001f, IMSI '' -> '001001000000031'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=31 TLLI=0xc000001f DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000000031)
TBF(TFI=31 TLLI=0xc000001f DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=31 TLLI=0xc000001f DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=31 TLLI=0xc000001f DIR=DL STATE=ASSIGN) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Move TFI selection into alloc_algorithm Currently the TFI and the TRX have to be determined before the actual TBF allocation function is called, passing TFI and TRX number as parameters. This does fit to TFI reuse for different slots, since this were tightly coupled with the slot selection. This commit just moves the TFI selection into the alloc_algorithm functions. The tfi parameter is removed from the the TFI alloc functions. The trx parameter is changed into use_trx to optionally limit the trx selection (same semantics like in tfi_find_free). Sponsored-by: On-Waves ehf
2015-07-10 08:41:36 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
Slot Allocation (Algorithm A) for class 45
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Failed to find a usable TRX (TFI exhausted)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
No PDCH resource
tbf: Move TFI selection into alloc_algorithm Currently the TFI and the TRX have to be determined before the actual TBF allocation function is called, passing TFI and TRX number as parameters. This does fit to TFI reuse for different slots, since this were tightly coupled with the slot selection. This commit just moves the TFI selection into the alloc_algorithm functions. The tfi parameter is removed from the the TFI alloc functions. The trx parameter is changed into use_trx to optionally limit the trx selection (same semantics like in tfi_find_free). Sponsored-by: On-Waves ehf
2015-07-10 08:41:36 +00:00
Destroying MS object, TLLI = 0x00000000
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 45
tbf/test: Add test for DL LLC packet loss Currently LLC frames are lost or even reordered when the TBF has be established via the AGCH and the procedure fails for some reason. This test tries to reproduce this behaviour by throwing away the first TBF while calling the handle() method several times. The results of create_dl_acked_block() are checked against expected values (this is currently party disabled because the bug still persists). Ticket: #1759 Sponsored-by: On-Waves ehf
2015-06-12 11:41:00 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
tbf/test: Add test for DL LLC packet loss Currently LLC frames are lost or even reordered when the TBF has be established via the AGCH and the procedure fails for some reason. This test tries to reproduce this behaviour by throwing away the first TBF while calling the handle() method several times. The results of create_dl_acked_block() are checked against expected values (this is currently party disabled because the bug still persists). Ticket: #1759 Sponsored-by: On-Waves ehf
2015-06-12 11:41:00 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xc0123456, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=NULL) [DOWNLINK] START
tbf/test: Add test for DL LLC packet loss Currently LLC frames are lost or even reordered when the TBF has be established via the AGCH and the procedure fails for some reason. This test tries to reproduce this behaviour by throwing away the first TBF while calling the handle() method several times. The results of create_dl_acked_block() are checked against expected values (this is currently party disabled because the bug still persists). Ticket: #1759 Sponsored-by: On-Waves ehf
2015-06-12 11:41:00 +00:00
Modifying MS object, TLLI = 0xc0123456, IMSI '' -> '001001000123456'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000123456)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
- TRX=0 (0) TS=4 TA=220 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) appending 19 bytes
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0xc0123456, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) appending 19 bytes
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) changes state from ASSIGN to RELEASING
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=RELEASING) free
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xc0123456, TBF = TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=RELEASING)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=45/0
tbf/test: Add test for DL LLC packet loss Currently LLC frames are lost or even reordered when the TBF has be established via the AGCH and the procedure fails for some reason. This test tries to reproduce this behaviour by throwing away the first TBF while calling the handle() method several times. The results of create_dl_acked_block() are checked against expected values (this is currently party disabled because the bug still persists). Ticket: #1759 Sponsored-by: On-Waves ehf
2015-06-12 11:41:00 +00:00
Slot Allocation (Algorithm A) for class 45
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
alloc: Load balancing for algo A Currently only the first enabled PDCH will be used. Beside the throughput this will also limit the number of TBFs: - number of UL TBFs <= 7 - number of DL TBFs <= 32 This commit changes the allocation algorithm to use the PDCH with the least number of attached TBFs. This will improve the troughput in both directions and the UL limits: - number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 14:35:38 +00:00
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign downlink TS=4 TFI=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
tbf/test: Add test for DL LLC packet loss Currently LLC frames are lost or even reordered when the TBF has be established via the AGCH and the procedure fails for some reason. This test tries to reproduce this behaviour by throwing away the first TBF while calling the handle() method several times. The results of create_dl_acked_block() are checked against expected values (this is currently party disabled because the bug still persists). Ticket: #1759 Sponsored-by: On-Waves ehf
2015-06-12 11:41:00 +00:00
Attaching TBF to MS object, TLLI = 0xc0123456, TBF = TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=NULL) [DOWNLINK] START
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=001001000123456)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
tbf: Refactor calls to write_immediate_assignment Make use of variables, log them to LOGL_DEBUG, and reduce code duplication. This should help to narrow down the cause why snd_dl_ass are not answered by the MS sometimes. Sponsored-by: On-Waves ehf
2016-01-20 17:26:13 +00:00
- TRX=0 (0) TS=4 TA=0 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) appending 19 bytes
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Sending new block at BSN 0, CS=CS-1
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Dequeue next LLC (len=19)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Complete DL frame, len=19
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Dequeue next LLC (len=19)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) data block (BSN 0, CS-1): 4d 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) msg block (BSN 0, CS-1): 07 00 00 4d 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
tbf: Fix downlink packet loss When the MS is pinged with a longer interval, many packets get lost even if the GprsMs object is kept. If the interval is above the time where the DL TBF is in state FLOW (mainly influenced be the dl-tbf-idle-time command), an new TBF must be requested via AGCH for each ICMP PING message. Currently the LLC frame containing the PING is immediately stored in the TBF and gets lost, if TBF establishment fails for some reason. This commit moves all calls to put_frame() to schedule_next_frame(), where the data is moved from the LLC queue to the frame storage within the TBF object. This method is only called from within create_new_bsn() when the TBF is in the FLOW state and the frame is going to be encoded immediately. At all other places, where put_frame() has been called before, the LLC message is just appended to the LLC queue in the GprsMs object. This change effectively simplifies the related code parts, since date/len information and discard notifications is no longer needed there. Ticket: #1759 Sponsored-by: On-Waves ehf
2015-06-12 12:06:09 +00:00
MSG = 07 00 00 4d 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Sending new block at BSN 1, CS=CS-1
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Complete DL frame, len=19
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Dequeue next LLC (len=19)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) data block (BSN 1, CS-1): 4d 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) msg block (BSN 1, CS-1): 07 00 02 4d 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02
tbf: Fix downlink packet loss When the MS is pinged with a longer interval, many packets get lost even if the GprsMs object is kept. If the interval is above the time where the DL TBF is in state FLOW (mainly influenced be the dl-tbf-idle-time command), an new TBF must be requested via AGCH for each ICMP PING message. Currently the LLC frame containing the PING is immediately stored in the TBF and gets lost, if TBF establishment fails for some reason. This commit moves all calls to put_frame() to schedule_next_frame(), where the data is moved from the LLC queue to the frame storage within the TBF object. This method is only called from within create_new_bsn() when the TBF is in the FLOW state and the frame is going to be encoded immediately. At all other places, where put_frame() has been called before, the LLC message is just appended to the LLC queue in the GprsMs object. This change effectively simplifies the related code parts, since date/len information and discard notifications is no longer needed there. Ticket: #1759 Sponsored-by: On-Waves ehf
2015-06-12 12:06:09 +00:00
MSG = 07 00 02 4d 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Sending new block at BSN 2, CS=CS-1
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) Complete DL frame, len=19
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=ASSIGN) changes state from ASSIGN to FINISHED
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=FINISHED) data block (BSN 2, CS-1): 4d 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=FINISHED) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=FINISHED) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=FINISHED) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=FINISHED) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=FINISHED) Polling cannot be scheduled in this TS 7 (first control TS 4)
TBF(TFI=0 TLLI=0xc0123456 DIR=DL STATE=FINISHED) msg block (BSN 2, CS-1): 07 01 04 4d 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03
tbf: Fix downlink packet loss When the MS is pinged with a longer interval, many packets get lost even if the GprsMs object is kept. If the interval is above the time where the DL TBF is in state FLOW (mainly influenced be the dl-tbf-idle-time command), an new TBF must be requested via AGCH for each ICMP PING message. Currently the LLC frame containing the PING is immediately stored in the TBF and gets lost, if TBF establishment fails for some reason. This commit moves all calls to put_frame() to schedule_next_frame(), where the data is moved from the LLC queue to the frame storage within the TBF object. This method is only called from within create_new_bsn() when the TBF is in the FLOW state and the frame is going to be encoded immediately. At all other places, where put_frame() has been called before, the LLC message is just appended to the LLC queue in the GprsMs object. This change effectively simplifies the related code parts, since date/len information and discard notifications is no longer needed there. Ticket: #1759 Sponsored-by: On-Waves ehf
2015-06-12 12:06:09 +00:00
MSG = 07 01 04 4d 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03
tbf: Put the TFI->TBF mapping into the PDCH objects Currently the TBFs are registered in a TFI indexed array within the TRX objects. TBFs can be searched globally by TFI and TRX number. This conflicts with the use of the same TFI for different TBF on different PDCH. This use case requires the specification of the PDCH as additional search dimension. This commit moves the TFI index TBF arrays into the PDCH objects. The related methods are updated accordingly. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 17:52:37 +00:00
Searching for first unallocated TFI: TRX=0
tbf/test: Add tests for single and two phase access These tests cover the message exchange from receiving from the first RACH request to the first data block when establishing an uplink TBF. This will be used to check, whether TA and other values are passed to an MS object correctly. In addition, the RX RACH log message in rcv_rach is extended to contain the single block fn. Sponsored-by: On-Waves ehf
2015-05-27 11:03:15 +00:00
Found TFI=0.
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x03 Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
tbf/test: Add tests for single and two phase access These tests cover the message exchange from receiving from the first RACH request to the first data block when establishing an uplink TBF. This will be used to check, whether TA and other values are passed to an MS object correctly. In addition, the RX RACH log message in rcv_rach is extended to contain the single block fn. Sponsored-by: On-Waves ehf
2015-05-27 11:03:15 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign uplink TS=7 TFI=0 USF=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x03, Fn=2654167 (17,25,9)
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
tbf: Refactor calls to write_immediate_assignment Make use of variables, log them to LOGL_DEBUG, and reduce code duplication. This should help to narrow down the cause why snd_dl_ass are not answered by the MS sometimes. Sponsored-by: On-Waves ehf
2016-01-20 17:26:13 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=0 USF=0
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) Got CS-1 RLC data block: CV=0, BSN=0, SPB=0, PI=0, E=1, TI=1, bitoffs=24
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) data_length=20, data=f1 22 33 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) Decoded premier TLLI=0x00000000 of UL DATA TFI=0.
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Frame 1 starts at offset 4, length=16, is_complete=1
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) complete UL frame len=16
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
LLC [PCU -> SGSN] TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) len=16
tbf/test: Add tests for single and two phase access These tests cover the message exchange from receiving from the first RACH request to the first data block when establishing an uplink TBF. This will be used to check, whether TA and other values are passed to an MS object correctly. In addition, the RX RACH log message in rcv_rach is extended to contain the single block fn. Sponsored-by: On-Waves ehf
2015-05-27 11:03:15 +00:00
No bctx
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) No gaps in received block, last block: BSN=0 CV=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Finished with UL TBF
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes state from FLOW to FINISHED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FINISHED) Scheduling Ack/Nack, because TLLI is included.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FINISHED) Scheduling Ack/Nack, because last block has CV==0.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FINISHED) changes UL ACK state from GPRS_RLCMAC_UL_ACK_NONE to GPRS_RLCMAC_UL_ACK_SEND_ACK
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FINISHED)', TA=7
tbf: Store the timing advance (TA) value in the GprsMs object The TA value rather relates to an MS and not to a single TBF. So all TBFs share the same TA value. Currently the TA value is stored per TBF and eventually copied from an old TBF to a new one. It is in general only passed with an RACH request when the TLLI and thus the MS is not yet known. This commit adds a TA member to the GprsMs class and uses that one when the TBF is associated to an MS object. Since the TBF is not always associated with an MS object (after RACH or when it has been replaced by another TBF), the TA value is still stored in each TBF and that value is used as long as no MS object is being associated. Sponsored-by: On-Waves ehf
2015-05-22 15:48:04 +00:00
Got MS: TLLI = 0xf1223344, TA = 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=0/0
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) [DOWNLINK] START
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Send dowlink assignment on PCH, no TBF exist (IMSI=0011223344)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) TX: START Immediate Assignment Downlink (PCH)
tbf: Refactor calls to write_immediate_assignment Make use of variables, log them to LOGL_DEBUG, and reduce code duplication. This should help to narrow down the cause why snd_dl_ass are not answered by the MS sometimes. Sponsored-by: On-Waves ehf
2016-01-20 17:26:13 +00:00
- TRX=0 (0) TS=7 TA=7 pollFN=-1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 4 bytes
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
tbf/test: Add tests for single and two phase access These tests cover the message exchange from receiving from the first RACH request to the first data block when establishing an uplink TBF. This will be used to check, whether TA and other values are passed to an MS object correctly. In addition, the RX RACH log message in rcv_rach is extended to contain the single block fn. Sponsored-by: On-Waves ehf
2015-05-27 11:03:15 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
tbf/test: Add tests for single and two phase access These tests cover the message exchange from receiving from the first RACH request to the first data block when establishing an uplink TBF. This will be used to check, whether TA and other values are passed to an MS object correctly. In addition, the RX RACH log message in rcv_rach is extended to contain the single block fn. Sponsored-by: On-Waves ehf
2015-05-27 11:03:15 +00:00
TX: Immediate Assignment Uplink (AGCH)
encoding: Redesign Encoding::write_immediate_assignment API The EGPRS support will need more information to encode the IMMEDIATE ASSIGMENT. Instead of adding more parameters pass a pointer to the TBF unless an SBA shall be done (indicated by tbf == NULL). All values that can be derived from the TBF and are not needed for an SBA are removed from the parameter list. Return a negative value on error. Sponsored-by: On-Waves ehf
2016-02-01 15:13:38 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
tbf: Put the TFI->TBF mapping into the PDCH objects Currently the TBFs are registered in a TFI indexed array within the TRX objects. TBFs can be searched globally by TFI and TRX number. This conflicts with the use of the same TFI for different TBF on different PDCH. This use case requires the specification of the PDCH as additional search dimension. This commit moves the TFI index TBF arrays into the PDCH objects. The related methods are updated accordingly. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 17:52:37 +00:00
Searching for first unallocated TFI: TRX=0
tbf/test: Add tests for single and two phase access These tests cover the message exchange from receiving from the first RACH request to the first data block when establishing an uplink TBF. This will be used to check, whether TA and other values are passed to an MS object correctly. In addition, the RX RACH log message in rcv_rach is extended to contain the single block fn. Sponsored-by: On-Waves ehf
2015-05-27 11:03:15 +00:00
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/0
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Creating MS object, TLLI = 0x00000000
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Slot Allocation (Algorithm A) for class 1
tbf/test: Add tests for single and two phase access These tests cover the message exchange from receiving from the first RACH request to the first data block when establishing an uplink TBF. This will be used to check, whether TA and other values are passed to an MS object correctly. In addition, the RX RACH log message in rcv_rach is extended to contain the single block fn. Sponsored-by: On-Waves ehf
2015-05-27 11:03:15 +00:00
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
alloc: Allocate TFI per slot (algorithm A) Currently the TFI are managed per TRX, thus only a maximum of 32 TBF per direction and per TRX are possible simultaneously. This commit modifies algorithm_a() to allow the sharing of TFI between different PDCH. Since algorithm A only assigns a single slot to each TBF, the TFI of each PDCH can be assigned independently. This increases the maximum to 32 TBF per direction and per PDCH concerning the TFI allocation. Ticket: #1793 Sponsored-by: On-Waves ehf
2015-07-10 10:25:25 +00:00
- Assign uplink TS=7 TFI=0 USF=0
tbf: Keep a set of used TFI and USF per PDCH Currently is is rather expensive to get TFI and USF usage per PDCH, because the TBFs need to be scanned to get that information. This commit adds corresponding bit sets which get updated by the attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class. Sponsored-by: On-Waves ehf
2015-06-30 12:10:13 +00:00
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
tbf: Always create an MS object on TBF allocation Currently the MS object are created when the TLLI gets known. Therefore some information (TA, MS class) must be stored in the TBF itself and is copied to the MS object later on. This would get even more complex, if the allocation algorithms were extended based on this scheme. This commit ensures, that an MS object will always be created on TBF allocation, even if the TLLI is not yet known. These 'anonymous' objects are still managed by the MS storage. To avoid dangling entries without a TLLI there (which cannnot be retrieved anyway), the timer in the MS objects is not started after all TBF have been detached, so that they get deleted immediately in that case. Note that an MS object can still be removed (e.g. by replacement) from an existing TBF, so tbf->ms() can be NULL. Ticket: #1794 Sponsored-by: On-Waves ehf
2015-06-19 07:08:23 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
tbf/test: Add tests for single and two phase access These tests cover the message exchange from receiving from the first RACH request to the first data block when establishing an uplink TBF. This will be used to check, whether TA and other values are passed to an MS object correctly. In addition, the RX RACH log message in rcv_rach is extended to contain the single block fn. Sponsored-by: On-Waves ehf
2015-05-27 11:03:15 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) (TRX=0, TS=7)
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes state from ASSIGN to FLOW
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) No gaps in received block, last block: BSN=0 CV=15
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW)', TA=7
tbf: Store the timing advance (TA) value in the GprsMs object The TA value rather relates to an MS and not to a single TBF. So all TBFs share the same TA value. Currently the TA value is stored per TBF and eventually copied from an old TBF to a new one. It is in general only passed with an RACH request when the TLLI and thus the MS is not yet known. This commit adds a TA member to the GprsMs class and uses that one when the TBF is associated to an MS object. Since the TBF is not always associated with an MS object (after RACH or when it has been replaced by another TBF), the TA value is still stored in each TBF and that value is used as long as no MS object is being associated. Sponsored-by: On-Waves ehf
2015-05-22 15:48:04 +00:00
Got MS: TLLI = 0xf1223344, TA = 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/0
tbf: Low prio for BSSPG values for GPRS/EGPRS MS class Currently the values in the BSSGP RA Cap IE are eventually use overwrite the 'good' values obtained from the MS earlier. Use the 'good' values when the are present, which is assumed if at least one of ms->ms_class() or ms->egprs_ms_class() is set. Sponsored-by: On-Waves ehf
2016-01-20 12:30:34 +00:00
Slot Allocation (Algorithm A) for class 1
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) [DOWNLINK] START
tbf/test: Fix existing tests This commit fixes several issues: - Set MS class in request - Set IMSI in establish_ul_tbf_two_phase - Fake assigment acknowledgement in establish_ul_tbf_two_phase - Fix TFI bit offset to 1 (was 2) Sponsored-by: On-Waves ehf
2015-08-21 16:00:54 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 4 bytes
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
TX: Immediate Assignment Uplink (AGCH)
encoding: Redesign Encoding::write_immediate_assignment API The EGPRS support will need more information to encode the IMMEDIATE ASSIGMENT. Instead of adding more parameters pass a pointer to the TBF unless an SBA shall be done (indicated by tbf == NULL). All values that can be derived from the TBF and are not needed for an SBA are removed from the parameter list. Return a negative value on error. Sponsored-by: On-Waves ehf
2016-02-01 15:13:38 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/0
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) (TRX=0, TS=7)
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes state from ASSIGN to FLOW
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) No gaps in received block, last block: BSN=0 CV=15
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW)', TA=7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/0
tbf: Low prio for BSSPG values for GPRS/EGPRS MS class Currently the values in the BSSGP RA Cap IE are eventually use overwrite the 'good' values obtained from the MS earlier. Use the 'good' values when the are present, which is assumed if at least one of ms->ms_class() or ms->egprs_ms_class() is set. Sponsored-by: On-Waves ehf
2016-01-20 12:30:34 +00:00
Slot Allocation (Algorithm A) for class 1
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) [DOWNLINK] START
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 10 bytes
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Old MS: TLLI = 0xf1223344, TA = 7, IMSI = 0011223344, LLC = 1
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
Received RTS for PDCH: TRX=0 TS=7 FN=2654275 block_nr=9 scheduling USF=0 for required uplink resource of UL TFI=0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Scheduled DL Assignment polling on PACCH (FN=2654288, TS=7)
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) (TRX=0, TS=7)
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) [UPLINK] DOWNLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) changes state from ASSIGN to FLOW
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) stopping timer T0 [control acked (DL-TBF)]
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
Received RTS for PDCH: TRX=0 TS=7 FN=2654279 block_nr=10 scheduling USF=0 for required uplink resource of UL TFI=0
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 0, CS=CS-4
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) changes state from FLOW to FINISHED
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) data block (BSN 0, CS-4): 29 52 41 55 5f 41 43 43 45 50 54 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Scheduled DL Acknowledgement polling on PACCH (FN=2654292, TS=7)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) starting timer T3191 [final block (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Scheduled Ack/Nack polling on FN=2654292, TS=7
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) msg block (BSN 0, CS-4): 0f 01 00 29 52 41 55 5f 41 43 43 45 50 54 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
Received RTS for PDCH: TRX=0 TS=7 FN=2654283 block_nr=11 scheduling USF=0 for required uplink resource of UL TFI=0
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Restarting at BSN 0, because all blocks have been transmitted.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Resending BSN 0
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) msg block (BSN 0, CS-4): 07 01 00 29 52 41 55 5f 41 43 43 45 50 54 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654232 qta=31 is_11bit=0:
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654232 (17,39,22), SBFn=2654335
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
TX: Immediate Assignment Uplink (AGCH)
encoding: Redesign Encoding::write_immediate_assignment API The EGPRS support will need more information to encode the IMMEDIATE ASSIGMENT. Instead of adding more parameters pass a pointer to the TBF unless an SBA shall be done (indicated by tbf == NULL). All values that can be derived from the TBF and are not needed for an SBA are removed from the parameter list. Return a negative value on error. Sponsored-by: On-Waves ehf
2016-02-01 15:13:38 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=1.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) poll timeout for FN=2654292, TS=7 (curr FN 2654335)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Timeout for polling PACKET DOWNLINK ACK.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Assignment was on PACCH
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) No downlink ACK received yet
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/0
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=1 USF=1
PDCH(TS 7, TRX 0): Attaching TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL), 2 TBFs, USFs = 03, TFIs = 00000003.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=ASSIGN) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf5667788, not yet confirmed
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0xf5667788, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
Received RTS for PDCH: TRX=0 TS=7 FN=2654335 block_nr=11 scheduling USF=0 for required uplink resource of UL TFI=0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) Scheduled UL Assignment polling on PACCH (FN=2654348, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) (TRX=0, TS=7)
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=ASSIGN) changes state from ASSIGN to FLOW
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=1, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=FLOW) UL DATA TFI=1 received (V(Q)=0 .. V(R)=0)
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=FLOW) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=FLOW) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=FLOW) BSN 0 storing in window (0..63)
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=FLOW) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=FLOW) Assembling frames: (len=20)
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=FLOW) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=1 TLLI=0xf5667788 DIR=UL STATE=FLOW) No gaps in received block, last block: BSN=0 CV=15
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Old MS: TLLI = 0xf1223344, TA = 7, IMSI = 0011223344, LLC = 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
There is a new MS object for the same MS: (0xf1223344, '0011223344') -> (0xf5667788, '')
IMSI 0011223344, old TBF TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED): moving DL TBF to new MS object
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Detaching TBF from MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED)
Attaching TBF to MS object, TLLI = 0xf5667788, TBF = TBF(TFI=0 TLLI=0xf5667788 DIR=DL STATE=FINISHED)
Modifying MS object, TLLI = 0xf5667788, IMSI '' -> '0011223344'
Clearing MS object, TLLI: 0xf1223344, IMSI: '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf5667788 DIR=DL STATE=FINISHED) appending 4 bytes
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, TLLI: 0xf5667788 confirmed
New MS: TLLI = 0xf5667788, TA = 7, IMSI = 0011223344, LLC = 1
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
TX: Immediate Assignment Uplink (AGCH)
encoding: Redesign Encoding::write_immediate_assignment API The EGPRS support will need more information to encode the IMMEDIATE ASSIGMENT. Instead of adding more parameters pass a pointer to the TBF unless an SBA shall be done (indicated by tbf == NULL). All values that can be derived from the TBF and are not needed for an SBA are removed from the parameter list. Return a negative value on error. Sponsored-by: On-Waves ehf
2016-02-01 15:13:38 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/0
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) (TRX=0, TS=7)
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes state from ASSIGN to FLOW
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) No gaps in received block, last block: BSN=0 CV=15
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW)', TA=7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/0
tbf: Low prio for BSSPG values for GPRS/EGPRS MS class Currently the values in the BSSGP RA Cap IE are eventually use overwrite the 'good' values obtained from the MS earlier. Use the 'good' values when the are present, which is assumed if at least one of ms->ms_class() or ms->egprs_ms_class() is set. Sponsored-by: On-Waves ehf
2016-01-20 12:30:34 +00:00
Slot Allocation (Algorithm A) for class 1
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) [DOWNLINK] START
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 20 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 20 bytes
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Old MS: TLLI = 0xf1223344, TA = 7, IMSI = 0011223344, LLC = 2
UL RSSI of TLLI=0xf1223344: 31 dBm
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) free
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) FIXME: Software error: Pending downlink assignment in state GPRS_RLCMAC_DL_ASS_SEND_ASS. This may not happen, because the assignment message never gets transmitted. Please be sure not to free in this state. PLEASE FIX!
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) stopping timer T3169 [freeing TBF]
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
PDCH(TS 7, TRX 0): Detaching TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF ends here **********
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654224 qta=31 is_11bit=0:
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654224 (17,31,14), SBFn=2654327
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
TX: Immediate Assignment Uplink (AGCH)
encoding: Redesign Encoding::write_immediate_assignment API The EGPRS support will need more information to encode the IMMEDIATE ASSIGMENT. Instead of adding more parameters pass a pointer to the TBF unless an SBA shall be done (indicated by tbf == NULL). All values that can be derived from the TBF and are not needed for an SBA are removed from the parameter list. Return a negative value on error. Sponsored-by: On-Waves ehf
2016-02-01 15:13:38 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) Got RACH from TLLI=0xf1223344 while TBF still exists. Release pending DL TBF
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) changes state from ASSIGN to RELEASING
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING) free
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING) stopping timer T0 [freeing TBF]
tbf: Do not reuse old TBF after RACH requests Currently existing TBF can be reused after an MS has sent a RACH request. Since the MS can be or most probably is in packet idle mode in that case, the TBF are no longer usable even if they share the PDCHs and the control TS with the new one. There are occasional freezes where the MS does no longer react to messages sent on the PACCH. This change aborts all pending TBFs if a new TBF is or has been established via RACH. Sponsored-by: On-Waves ehf
2016-01-21 19:48:39 +00:00
PDCH(TS 7, TRX 0): Detaching TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
MS requests UL TBF in packet resource request of single block, so we provide one:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/0
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) Scheduled UL Assignment polling on PACCH (FN=2654340, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) (TRX=0, TS=7)
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes state from ASSIGN to FLOW
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/0
bts: Start a DL TBF if needed after establishment of an UL TBF Currently an existing DL TBF can get lost in the process of establishing an UL TBF via RACH. This can lead to stalled connections until the network sends more LLC frames. This commit adds a check for a non-empty LLC queue after the UL TBF has been established to rcv_control_ack (GPRS_RLCMAC_UL_ASS_WAIT_ACK path) to eventually establish a new DL TBF on the UL TBF's PACCH. Sponsored-by: On-Waves ehf
2015-09-01 09:38:40 +00:00
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
tbf: Do not reuse old TBF after RACH requests Currently existing TBF can be reused after an MS has sent a RACH request. Since the MS can be or most probably is in packet idle mode in that case, the TBF are no longer usable even if they share the PDCHs and the control TS with the new one. There are occasional freezes where the MS does no longer react to messages sent on the PACCH. This change aborts all pending TBFs if a new TBF is or has been established via RACH. Sponsored-by: On-Waves ehf
2016-01-21 19:48:39 +00:00
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7
tbf: Do not reuse old TBF after RACH requests Currently existing TBF can be reused after an MS has sent a RACH request. Since the MS can be or most probably is in packet idle mode in that case, the TBF are no longer usable even if they share the PDCHs and the control TS with the new one. There are occasional freezes where the MS does no longer react to messages sent on the PACCH. This change aborts all pending TBFs if a new TBF is or has been established via RACH. Sponsored-by: On-Waves ehf
2016-01-21 19:48:39 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Trigger downlink assignment on PACCH
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) No gaps in received block, last block: BSN=0 CV=15
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
New MS: TLLI = 0xf1223344, TA = 7, IMSI = 0011223344, LLC = 2
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
TX: Immediate Assignment Uplink (AGCH)
encoding: Redesign Encoding::write_immediate_assignment API The EGPRS support will need more information to encode the IMMEDIATE ASSIGMENT. Instead of adding more parameters pass a pointer to the TBF unless an SBA shall be done (indicated by tbf == NULL). All values that can be derived from the TBF and are not needed for an SBA are removed from the parameter list. Return a negative value on error. Sponsored-by: On-Waves ehf
2016-02-01 15:13:38 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/0
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) (TRX=0, TS=7)
tbf/test: Do RLC based ack instead of just faking Currently the assignment is completed by manipulating the state of the TBF objects directly by setting the state fields to fixed values. This way, the PCU's code that is responsible to update the state accordingly is not tested. This commit changes this to simulate RLC Control Acknowledgement messages instead. Sponsored-by: On-Waves ehf
2015-08-21 13:03:23 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes state from ASSIGN to FLOW
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) No gaps in received block, last block: BSN=0 CV=15
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW)', TA=7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/0
tbf: Low prio for BSSPG values for GPRS/EGPRS MS class Currently the values in the BSSGP RA Cap IE are eventually use overwrite the 'good' values obtained from the MS earlier. Use the 'good' values when the are present, which is assumed if at least one of ms->ms_class() or ms->egprs_ms_class() is set. Sponsored-by: On-Waves ehf
2016-01-20 12:30:34 +00:00
Slot Allocation (Algorithm A) for class 1
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) [DOWNLINK] START
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 20 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 20 bytes
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Old MS: TLLI = 0xf1223344, TA = 7, IMSI = 0011223344, LLC = 2
UL RSSI of TLLI=0xf1223344: 31 dBm
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) free
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) FIXME: Software error: Pending downlink assignment in state GPRS_RLCMAC_DL_ASS_SEND_ASS. This may not happen, because the assignment message never gets transmitted. Please be sure not to free in this state. PLEASE FIX!
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) stopping timer T3169 [freeing TBF]
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
PDCH(TS 7, TRX 0): Detaching TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF ends here **********
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x03 Fn=2654275 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x03, Fn=2654275 (17,31,13)
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
tbf: Refactor calls to write_immediate_assignment Make use of variables, log them to LOGL_DEBUG, and reduce code duplication. This should help to narrow down the cause why snd_dl_ass are not answered by the MS sometimes. Sponsored-by: On-Waves ehf
2016-01-20 17:26:13 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=0 USF=0
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) Got CS-1 RLC data block: CV=0, BSN=0, SPB=0, PI=0, E=1, TI=1, bitoffs=24
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) data_length=20, data=f1 22 33 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) Decoded premier TLLI=0x00000000 of UL DATA TFI=0.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) Got RACH from TLLI=0xf1223344 while TBF still exists: killing pending DL TBF
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) changes state from ASSIGN to RELEASING
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING) free
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING) stopping timer T0 [freeing TBF]
tbf: Do not reuse old TBF after RACH requests Currently existing TBF can be reused after an MS has sent a RACH request. Since the MS can be or most probably is in packet idle mode in that case, the TBF are no longer usable even if they share the PDCHs and the control TS with the new one. There are occasional freezes where the MS does no longer react to messages sent on the PACCH. This change aborts all pending TBFs if a new TBF is or has been established via RACH. Sponsored-by: On-Waves ehf
2016-01-21 19:48:39 +00:00
PDCH(TS 7, TRX 0): Detaching TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING), 0 TBFs, USFs = 01, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf: Refactor reuse_tbf into releasing and DL TBF establishment Currently reuse_tbf (partly) resets the old DL TBF and uses its PACCH to establish a new DL TBF. The method can not be used with UL TBFs. This commit replaces the reuse_tbf method into a gprs_rlcmac_dl_tbf:release method which triggers the TBF's timer based deletion (so that the TFI is still reserved for some time) and a gprs_rlcmac_tbf::establish_dl_tbf_on_pacch which can establish DL TBFs on existing PACCHs of either DL or UL TBFs. Sponsored-by: On-Waves ehf
2015-09-01 09:20:29 +00:00
Modifying MS object, TLLI = 0x00000000, IMSI '' -> '0011223344'
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Clearing MS object, TLLI: 0xf1223344, IMSI: '0011223344'
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
tbf: Refactor reuse_tbf into releasing and DL TBF establishment Currently reuse_tbf (partly) resets the old DL TBF and uses its PACCH to establish a new DL TBF. The method can not be used with UL TBFs. This commit replaces the reuse_tbf method into a gprs_rlcmac_dl_tbf:release method which triggers the TBF's timer based deletion (so that the TFI is still reserved for some time) and a gprs_rlcmac_tbf::establish_dl_tbf_on_pacch which can establish DL TBFs on existing PACCHs of either DL or UL TBFs. Sponsored-by: On-Waves ehf
2015-09-01 09:20:29 +00:00
Destroying MS object, TLLI = 0x00000000
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Frame 1 starts at offset 4, length=16, is_complete=1
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) complete UL frame len=16
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
LLC [PCU -> SGSN] TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) len=16
tbf/test: Add tests for RACH while DL TBFs are active This adds tests for - RA update with RACH for the RAUpdateComplete message - RACH for UL while DL is active (LLC queue not empty) Sponsored-by: On-Waves ehf
2015-08-21 16:15:38 +00:00
No bctx
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) No gaps in received block, last block: BSN=0 CV=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Finished with UL TBF
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes state from FLOW to FINISHED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FINISHED) Scheduling Ack/Nack, because TLLI is included.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FINISHED) Scheduling Ack/Nack, because last block has CV==0.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FINISHED) changes UL ACK state from GPRS_RLCMAC_UL_ACK_NONE to GPRS_RLCMAC_UL_ACK_SEND_ACK
tbf: Refactor reuse_tbf into releasing and DL TBF establishment Currently reuse_tbf (partly) resets the old DL TBF and uses its PACCH to establish a new DL TBF. The method can not be used with UL TBFs. This commit replaces the reuse_tbf method into a gprs_rlcmac_dl_tbf:release method which triggers the TBF's timer based deletion (so that the TFI is still reserved for some time) and a gprs_rlcmac_tbf::establish_dl_tbf_on_pacch which can establish DL TBFs on existing PACCHs of either DL or UL TBFs. Sponsored-by: On-Waves ehf
2015-09-01 09:20:29 +00:00
New MS: TLLI = 0xf1223344, TA = 7, IMSI = 0011223344, LLC = 2
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
TX: Immediate Assignment Uplink (AGCH)
encoding: Redesign Encoding::write_immediate_assignment API The EGPRS support will need more information to encode the IMMEDIATE ASSIGMENT. Instead of adding more parameters pass a pointer to the TBF unless an SBA shall be done (indicated by tbf == NULL). All values that can be derived from the TBF and are not needed for an SBA are removed from the parameter list. Return a negative value on error. Sponsored-by: On-Waves ehf
2016-02-01 15:13:38 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/0
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) (TRX=0, TS=7)
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN) changes state from ASSIGN to FLOW
edge: Use a single PDCH rcv_data_block method for GPRS and EGPRS Currently GPRS is handled by the old code path while EGPRS already uses the unified functions. The rcv_block_egprs is basically not specific to EGPRS and just needs minor modifications to handle GPRS. This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified rcv_data_block method and uses it for GPRS, too. Note that the logging messages of the new parser are different. Sponsored-by: On-Waves ehf
2015-12-09 16:39:56 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) No gaps in received block, last block: BSN=0 CV=15
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW)', TA=7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/0
tbf: Low prio for BSSPG values for GPRS/EGPRS MS class Currently the values in the BSSGP RA Cap IE are eventually use overwrite the 'good' values obtained from the MS earlier. Use the 'good' values when the are present, which is assumed if at least one of ms->ms_class() or ms->egprs_ms_class() is set. Sponsored-by: On-Waves ehf
2016-01-20 12:30:34 +00:00
Slot Allocation (Algorithm A) for class 1
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) [DOWNLINK] START
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) appending 13 bytes
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Old MS: TLLI = 0xf1223344, TA = 7, IMSI = 0011223344, LLC = 40
Received RTS for PDCH: TRX=0 TS=7 FN=2654275 block_nr=9 scheduling USF=0 for required uplink resource of UL TFI=0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) Scheduled DL Assignment polling on PACCH (FN=2654288, TS=7)
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) (TRX=0, TS=7)
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) [UPLINK] DOWNLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) changes state from ASSIGN to FLOW
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) stopping timer T0 [control acked (DL-TBF)]
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654279 block_nr=10 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 0, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 0, CS-1): 37 4c 4c 43 20 50 41 43 4b 45 54 20 30 30 4c 4c 43 20 50 41
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 0, CS-1): 07 00 00 37 4c 4c 43 20 50 41 43 4b 45 54 20 30 30 4c 4c 43 20 50 41
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654283 block_nr=11 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 1, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 1, CS-1): 1f 43 4b 45 54 20 30 31 4c 4c 43 20 50 41 43 4b 45 54 20 30
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 1, CS-1): 07 00 02 1f 43 4b 45 54 20 30 31 4c 4c 43 20 50 41 43 4b 45 54 20 30
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654288 block_nr=0 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 2, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 2, CS-1): 06 37 32 4c 4c 43 20 50 41 43 4b 45 54 20 30 33 4c 4c 43 20
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 2, CS-1): 07 00 04 06 37 32 4c 4c 43 20 50 41 43 4b 45 54 20 30 33 4c 4c 43 20
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654292 block_nr=1 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==3)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 3, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 3, CS-1): 27 50 41 43 4b 45 54 20 30 34 4c 4c 43 20 50 41 43 4b 45 54
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 3 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 3)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 3, CS-1): 07 00 06 27 50 41 43 4b 45 54 20 30 34 4c 4c 43 20 50 41 43 4b 45 54
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654296 block_nr=2 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 4, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 4, CS-1): 0e 37 20 30 35 4c 4c 43 20 50 41 43 4b 45 54 20 30 36 4c 4c
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 4, CS-1): 07 00 08 0e 37 20 30 35 4c 4c 43 20 50 41 43 4b 45 54 20 30 36 4c 4c
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654301 block_nr=3 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==5)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 5, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 5, CS-1): 2f 43 20 50 41 43 4b 45 54 20 30 37 4c 4c 43 20 50 41 43 4b
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 5 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 5)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 5, CS-1): 07 00 0a 2f 43 20 50 41 43 4b 45 54 20 30 37 4c 4c 43 20 50 41 43 4b
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654305 block_nr=4 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 6, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 6, CS-1): 16 35 45 54 20 30 38 4c 4c 43 20 50 41 43 4b 45 54 20 30 39
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 6, CS-1): 07 00 0c 16 35 45 54 20 30 38 4c 4c 43 20 50 41 43 4b 45 54 20 30 39
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654309 block_nr=5 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==7)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 7, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 7, CS-1): 37 4c 4c 43 20 50 41 43 4b 45 54 20 31 30 4c 4c 43 20 50 41
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 7 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 7)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 7, CS-1): 07 00 0e 37 4c 4c 43 20 50 41 43 4b 45 54 20 31 30 4c 4c 43 20 50 41
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654314 block_nr=6 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 8, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 8, CS-1): 1f 43 4b 45 54 20 31 31 4c 4c 43 20 50 41 43 4b 45 54 20 31
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 8, CS-1): 07 00 10 1f 43 4b 45 54 20 31 31 4c 4c 43 20 50 41 43 4b 45 54 20 31
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654318 block_nr=7 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==9)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 9, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 9, CS-1): 06 37 32 4c 4c 43 20 50 41 43 4b 45 54 20 31 33 4c 4c 43 20
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 9 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 9)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 9, CS-1): 07 00 12 06 37 32 4c 4c 43 20 50 41 43 4b 45 54 20 31 33 4c 4c 43 20
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654322 block_nr=8 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==10)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 10, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 10, CS-1): 27 50 41 43 4b 45 54 20 31 34 4c 4c 43 20 50 41 43 4b 45 54
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 10 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 10)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 10, CS-1): 07 00 14 27 50 41 43 4b 45 54 20 31 34 4c 4c 43 20 50 41 43 4b 45 54
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654327 block_nr=9 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==11)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 11, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 11, CS-1): 0e 37 20 31 35 4c 4c 43 20 50 41 43 4b 45 54 20 31 36 4c 4c
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 11 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 11)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 11, CS-1): 07 00 16 0e 37 20 31 35 4c 4c 43 20 50 41 43 4b 45 54 20 31 36 4c 4c
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654331 block_nr=10 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==12)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 12, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 12, CS-1): 2f 43 20 50 41 43 4b 45 54 20 31 37 4c 4c 43 20 50 41 43 4b
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 12 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 12)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 12, CS-1): 07 00 18 2f 43 20 50 41 43 4b 45 54 20 31 37 4c 4c 43 20 50 41 43 4b
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654335 block_nr=11 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 13, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 13, CS-1): 16 35 45 54 20 31 38 4c 4c 43 20 50 41 43 4b 45 54 20 31 39
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 13 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 13, CS-1): 07 00 1a 16 35 45 54 20 31 38 4c 4c 43 20 50 41 43 4b 45 54 20 31 39
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654340 block_nr=0 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==14)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 14, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 14, CS-1): 37 4c 4c 43 20 50 41 43 4b 45 54 20 32 30 4c 4c 43 20 50 41
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 14 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 14)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 14, CS-1): 07 00 1c 37 4c 4c 43 20 50 41 43 4b 45 54 20 32 30 4c 4c 43 20 50 41
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654344 block_nr=1 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==15)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 15, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 15, CS-1): 1f 43 4b 45 54 20 32 31 4c 4c 43 20 50 41 43 4b 45 54 20 32
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 15 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 15)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 15, CS-1): 07 00 1e 1f 43 4b 45 54 20 32 31 4c 4c 43 20 50 41 43 4b 45 54 20 32
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654348 block_nr=2 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==16)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 16, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 16, CS-1): 06 37 32 4c 4c 43 20 50 41 43 4b 45 54 20 32 33 4c 4c 43 20
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 16 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 16)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 16, CS-1): 07 00 20 06 37 32 4c 4c 43 20 50 41 43 4b 45 54 20 32 33 4c 4c 43 20
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654353 block_nr=3 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==17)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 17, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 17, CS-1): 27 50 41 43 4b 45 54 20 32 34 4c 4c 43 20 50 41 43 4b 45 54
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 17 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 17)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 17, CS-1): 07 00 22 27 50 41 43 4b 45 54 20 32 34 4c 4c 43 20 50 41 43 4b 45 54
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654357 block_nr=4 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==18)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 18, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 18, CS-1): 0e 37 20 32 35 4c 4c 43 20 50 41 43 4b 45 54 20 32 36 4c 4c
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 18 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 18)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 18, CS-1): 07 00 24 0e 37 20 32 35 4c 4c 43 20 50 41 43 4b 45 54 20 32 36 4c 4c
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654361 block_nr=5 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==19)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 19, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 19, CS-1): 2f 43 20 50 41 43 4b 45 54 20 32 37 4c 4c 43 20 50 41 43 4b
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 19 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 19)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 19, CS-1): 07 00 26 2f 43 20 50 41 43 4b 45 54 20 32 37 4c 4c 43 20 50 41 43 4b
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654366 block_nr=6 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=5
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==20)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 20, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 20, CS-1): 16 35 45 54 20 32 38 4c 4c 43 20 50 41 43 4b 45 54 20 32 39
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 20 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 20)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Scheduling Ack/Nack polling, because 20 blocks sent.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Scheduled DL Acknowledgement polling on PACCH (FN=2654379, TS=7)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Scheduled Ack/Nack polling on FN=2654379, TS=7
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 20, CS-1): 0f 00 28 16 35 45 54 20 32 38 4c 4c 43 20 50 41 43 4b 45 54 20 32 39
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654370 block_nr=7 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==21)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 21, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 21, CS-1): 37 4c 4c 43 20 50 41 43 4b 45 54 20 33 30 4c 4c 43 20 50 41
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 21 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 21)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 21, CS-1): 07 00 2a 37 4c 4c 43 20 50 41 43 4b 45 54 20 33 30 4c 4c 43 20 50 41
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654374 block_nr=8 scheduling free USF for polling at FN=2654379 of TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==22)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 22, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 22, CS-1): 1f 43 4b 45 54 20 33 31 4c 4c 43 20 50 41 43 4b 45 54 20 33
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 22 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 22)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 22, CS-1): 07 00 2c 1f 43 4b 45 54 20 33 31 4c 4c 43 20 50 41 43 4b 45 54 20 33
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654379 block_nr=9 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==23)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 23, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 23, CS-1): 06 37 32 4c 4c 43 20 50 41 43 4b 45 54 20 33 33 4c 4c 43 20
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 23 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 23)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 23, CS-1): 07 00 2e 06 37 32 4c 4c 43 20 50 41 43 4b 45 54 20 33 33 4c 4c 43 20
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654383 block_nr=10 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==24)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 24, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 24, CS-1): 27 50 41 43 4b 45 54 20 33 34 4c 4c 43 20 50 41 43 4b 45 54
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 24 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 24)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 24, CS-1): 07 00 30 27 50 41 43 4b 45 54 20 33 34 4c 4c 43 20 50 41 43 4b 45 54
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654387 block_nr=11 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==25)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 25, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 25, CS-1): 0e 37 20 33 35 4c 4c 43 20 50 41 43 4b 45 54 20 33 36 4c 4c
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 25 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 25)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 25, CS-1): 07 00 32 0e 37 20 33 35 4c 4c 43 20 50 41 43 4b 45 54 20 33 36 4c 4c
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654392 block_nr=0 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==26)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 26, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 26, CS-1): 2f 43 20 50 41 43 4b 45 54 20 33 37 4c 4c 43 20 50 41 43 4b
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 26 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 26)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 26, CS-1): 07 00 34 2f 43 20 50 41 43 4b 45 54 20 33 37 4c 4c 43 20 50 41 43 4b
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654396 block_nr=1 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==27)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 27, CS=CS-1
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=13)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=13
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FLOW) changes state from FLOW to FINISHED
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) data block (BSN 27, CS-1): 16 35 45 54 20 33 38 4c 4c 43 20 50 41 43 4b 45 54 20 33 39
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) need_padding 0 spb_status 0 spb 0 (BSN1 27 BSN2 -1)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Copying data unit 0 (BSN 27)
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Polling is already scheduled
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) msg block (BSN 27, CS-1): 07 01 36 16 35 45 54 20 33 38 4c 4c 43 20 50 41 43 4b 45 54 20 33 39
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) appending 21 bytes
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) RX: [PCU <- BTS] Packet Downlink Ack/Nack
tbf: Use bitvec based window methods for GPRS Currently the old fixed 64 bit RBB based implementation is used for GPRS. Use the new bitvec based methods instead. Sponsored-by: On-Waves ehf
2016-01-14 12:40:01 +00:00
Got GPRS DL ACK bitmap: SSN: 0, BSN 0 to 28 - 1 (28 blocks), "RRRRRRRRRRRRRRRRRRRRRRRRRRRR"
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) downlink acknowledge
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) ack: (BSN=0)"RRRRRRRRRRRRRRRRRRRRRRRRRRRR"(BSN=27) R=ACK I=NACK
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) DL analysis, range=0:28, lost=0, recv=28, skipped=0, bsn=0, info='RRRRRRRRRRRRRRRRRRRRRRRRRRRR....................................'
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) V(B): (V(A)=28)""(V(S)-1=27) A=Acked N=Nacked U=Unacked X=Resend-Unacked I=Invalid
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Final ACK received.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=FINISHED) changes state from FINISHED to WAIT RELEASE
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/0
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=1
PDCH(TS 7, TRX 0): Attaching TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL), 2 TBFs, USFs = 01, TFIs = 00000003.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) Trigger downlink assignment on PACCH
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=NULL) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=NULL) changes state from NULL to ASSIGN
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
Received RTS for PDCH: TRX=0 TS=7 FN=2654400 block_nr=2 scheduling USF=0 for required uplink resource of UL TFI=0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) Scheduled DL Assignment polling on UNKNOWN (FN=2654413, TS=7)
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) (TRX=0, TS=7)
tbf/test: Add test_tbf_dl_reuse This tests the usage of an existing TBF that is no longer in FLOW state to request a new DL TBF via the old TBF's PACCH. The test triggers a bug that breaks the association between both TBF objects, resulting in packet loss and transmission stalling. Sponsored-by: On-Waves ehf
2015-08-21 13:04:39 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) [UPLINK] DOWNLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=WAIT RELEASE) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING) free
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING) stopping timer T3193 [freeing TBF]
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 7, TRX 0): Detaching TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING), 1 TBFs, USFs = 01, TFIs = 00000002.
Detaching TBF from MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=RELEASING)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=ASSIGN) changes state from ASSIGN to FLOW
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) stopping timer T0 [control acked (DL-TBF)]
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654405 block_nr=3 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 0, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 0, CS-1): 4c 4c 43 20 50 41 43 4b 45 54 20 30 30 20 28 54 42 46 20 32
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 0)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 0, CS-1): 07 02 01 4c 4c 43 20 50 41 43 4b 45 54 20 30 30 20 28 54 42 46 20 32
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654409 block_nr=4 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 1, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 1, CS-1): 07 29 4c 4c 43 20 50 41 43 4b 45 54 20 30 31 20 28 54 42 46
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 1, CS-1): 07 02 02 07 29 4c 4c 43 20 50 41 43 4b 45 54 20 30 31 20 28 54 42 46
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654413 block_nr=5 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 2, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 2, CS-1): 0f 20 32 29 4c 4c 43 20 50 41 43 4b 45 54 20 30 32 20 28 54
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 2)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 2, CS-1): 07 02 04 0f 20 32 29 4c 4c 43 20 50 41 43 4b 45 54 20 30 32 20 28 54
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654418 block_nr=6 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==3)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 3, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 3, CS-1): 17 42 46 20 32 29 4c 4c 43 20 50 41 43 4b 45 54 20 30 33 20
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 3 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 3)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 3, CS-1): 07 02 06 17 42 46 20 32 29 4c 4c 43 20 50 41 43 4b 45 54 20 30 33 20
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654422 block_nr=7 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 4, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 4, CS-1): 1f 28 54 42 46 20 32 29 4c 4c 43 20 50 41 43 4b 45 54 20 30
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 4)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 4, CS-1): 07 02 08 1f 28 54 42 46 20 32 29 4c 4c 43 20 50 41 43 4b 45 54 20 30
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654426 block_nr=8 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==5)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 5, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 5, CS-1): 27 34 20 28 54 42 46 20 32 29 4c 4c 43 20 50 41 43 4b 45 54
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 5 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 5)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 5, CS-1): 07 02 0a 27 34 20 28 54 42 46 20 32 29 4c 4c 43 20 50 41 43 4b 45 54
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654431 block_nr=9 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 6, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 6, CS-1): 2f 20 30 35 20 28 54 42 46 20 32 29 4c 4c 43 20 50 41 43 4b
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 6)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 6, CS-1): 07 02 0c 2f 20 30 35 20 28 54 42 46 20 32 29 4c 4c 43 20 50 41 43 4b
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654435 block_nr=10 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==7)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 7, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 7, CS-1): 37 45 54 20 30 36 20 28 54 42 46 20 32 29 4c 4c 43 20 50 41
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 7 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 7)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 7, CS-1): 07 02 0e 37 45 54 20 30 36 20 28 54 42 46 20 32 29 4c 4c 43 20 50 41
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654439 block_nr=11 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 8, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 8, CS-1): 3f 43 4b 45 54 20 30 37 20 28 54 42 46 20 32 29 4c 4c 43 20
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 8)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 8, CS-1): 07 02 10 3f 43 4b 45 54 20 30 37 20 28 54 42 46 20 32 29 4c 4c 43 20
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654444 block_nr=0 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==9)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 9, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Dequeue next LLC (len=21)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) data block (BSN 9, CS-1): 47 50 41 43 4b 45 54 20 30 38 20 28 54 42 46 20 32 29 4c 4c
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) need_padding 0 spb_status 0 spb 0 (BSN1 9 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Copying data unit 0 (BSN 9)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) msg block (BSN 9, CS-1): 07 02 12 47 50 41 43 4b 45 54 20 30 38 20 28 54 42 46 20 32 29 4c 4c
ms: Store references to replaced TBFs in the MS object Currently when calling GprsMs::attach_tbf and a TBF of the same direction already exists, the old TBF gets detached from the MS object. Therefore that TBF object loses access to that MS object including for instance TLLI and IMSI. This leads to failing DL TBF reuses, since the downlink assigment cannot be sent on the PACCH later on because that must be sent on the old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved. This commit fixes this bug by changing the GprsMs implementation to keep a list of replaced (old) TBFs. TBFs are only removed when they are being detached explicitely (see tbf_free and set_ms). Addresses: tbf.cpp:741 We have a schedule for downlink assignment at uplink TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no downlink TBF Sponsored-by: On-Waves ehf
2015-08-21 13:24:02 +00:00
Received RTS on disabled PDCH: TRX=0 TS=0
Received RTS on disabled PDCH: TRX=0 TS=1
Received RTS on disabled PDCH: TRX=0 TS=2
Received RTS on disabled PDCH: TRX=0 TS=3
Received RTS on disabled PDCH: TRX=0 TS=4
Received RTS on disabled PDCH: TRX=0 TS=5
Received RTS on disabled PDCH: TRX=0 TS=6
Received RTS for PDCH: TRX=0 TS=7 FN=2654448 block_nr=1 scheduling USF=0 for required uplink resource of UL TFI=0
Scheduling data message at RTS for DL TFI=1 (TRX=0, TS=7) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) downlink (V(A)==0 .. V(S)==10)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Sending new block at BSN 10, CS=CS-1
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) Complete DL frame, len=21
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FLOW) changes state from FLOW to FINISHED
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FINISHED) data block (BSN 10, CS-1): 4d 43 20 50 41 43 4b 45 54 20 30 39 20 28 54 42 46 20 32 29
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FINISHED) need_padding 0 spb_status 0 spb 0 (BSN1 10 BSN2 -1)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Copying data unit 0 (BSN 10)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Scheduled DL Acknowledgement polling on PACCH (FN=2654461, TS=7)
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FINISHED) starting timer T3191 [final block (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FINISHED) Scheduled Ack/Nack polling on FN=2654461, TS=7
TBF(TFI=1 TLLI=0xf1223344 DIR=DL STATE=FINISHED) msg block (BSN 10, CS-1): 0f 03 14 4d 43 20 50 41 43 4b 45 54 20 30 39 20 28 54 42 46 20 32 29
Not accepting non-EGPRS phone in EGPRS-only mode
No PDCH resource
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=12/0
edge: Make window size configurable Currently the window size is fixed to 64 even for EGPRS. Support dynamic window sizes depending on the number of PDCH. The WS can be set to b + f * N_PDCH. If the result is not valid according to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the next lower valid value (or 64). The following VTY commands are added (config-pcu node): window-size <0-1024> set base (b) value and leave f unchanged window-size <0-1024> <0-256> set base (b) and factor (f) Sponsored-by: On-Waves ehf
2016-01-19 14:53:30 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 12
Searching for first unallocated TFI: TRX=0
Found TFI=0.
Slot Allocation (Algorithm B) for class 12
- Rx=4 Tx=4 Sum Rx+Tx=5 Tta=2 Ttb=1 Tra=2 Trb=1 Type=1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Possible DL/UL slots: (TS=0)"..CCCC.."(TS=7)
- Selected DL slots: (TS=0)"..DDDD.."(TS=7)
Using 4 slots for DL
- Reserved DL/UL slots: (TS=0)"..DDCD.."(TS=7)
- Assigning DL TS 2
PDCH(TS 2, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
- Assigning DL TS 3
PDCH(TS 3, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
- Assigning DL TS 4
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
- Assigning DL TS 5
PDCH(TS 5, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
edge: Make window size configurable Currently the window size is fixed to 64 even for EGPRS. Support dynamic window sizes depending on the number of PDCH. The WS can be set to b + f * N_PDCH. If the result is not valid according to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the next lower valid value (or 64). The following VTY commands are added (config-pcu node): window-size <0-1024> set base (b) value and leave f unchanged window-size <0-1024> <0-256> set base (b) and factor (f) Sponsored-by: On-Waves ehf
2016-01-19 14:53:30 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 3c
edge: Make window size configurable Currently the window size is fixed to 64 even for EGPRS. Support dynamic window sizes depending on the number of PDCH. The WS can be set to b + f * N_PDCH. If the result is not valid according to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the next lower valid value (or 64). The following VTY commands are added (config-pcu node): window-size <0-1024> set base (b) value and leave f unchanged window-size <0-1024> <0-256> set base (b) and factor (f) Sponsored-by: On-Waves ehf
2016-01-19 14:53:30 +00:00
DL TBF slots: 0x3c, N: 4, WS: 64
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes state from NULL to RELEASING
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING) free
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 2, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
PDCH(TS 3, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
PDCH(TS 5, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING)
edge: Make window size configurable Currently the window size is fixed to 64 even for EGPRS. Support dynamic window sizes depending on the number of PDCH. The WS can be set to b + f * N_PDCH. If the result is not valid according to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the next lower valid value (or 64). The following VTY commands are added (config-pcu node): window-size <0-1024> set base (b) value and leave f unchanged window-size <0-1024> <0-256> set base (b) and factor (f) Sponsored-by: On-Waves ehf
2016-01-19 14:53:30 +00:00
Destroying MS object, TLLI = 0x00000000
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=12/12
edge: Make window size configurable Currently the window size is fixed to 64 even for EGPRS. Support dynamic window sizes depending on the number of PDCH. The WS can be set to b + f * N_PDCH. If the result is not valid according to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the next lower valid value (or 64). The following VTY commands are added (config-pcu node): window-size <0-1024> set base (b) value and leave f unchanged window-size <0-1024> <0-256> set base (b) and factor (f) Sponsored-by: On-Waves ehf
2016-01-19 14:53:30 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 12
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 12
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
edge: Make window size configurable Currently the window size is fixed to 64 even for EGPRS. Support dynamic window sizes depending on the number of PDCH. The WS can be set to b + f * N_PDCH. If the result is not valid according to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the next lower valid value (or 64). The following VTY commands are added (config-pcu node): window-size <0-1024> set base (b) value and leave f unchanged window-size <0-1024> <0-256> set base (b) and factor (f) Sponsored-by: On-Waves ehf
2016-01-19 14:53:30 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
Slot Allocation (Algorithm B) for class 12
- Rx=4 Tx=4 Sum Rx+Tx=5 Tta=2 Ttb=1 Tra=2 Trb=1 Type=1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Possible DL/UL slots: (TS=0)"..CCCC.."(TS=7)
- Selected DL slots: (TS=0)"..DDDD.."(TS=7)
Using 4 slots for DL
- Reserved DL/UL slots: (TS=0)"..DDCD.."(TS=7)
- Assigning DL TS 2
PDCH(TS 2, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
- Assigning DL TS 3
PDCH(TS 3, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
- Assigning DL TS 4
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
- Assigning DL TS 5
PDCH(TS 5, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
edge: Make window size configurable Currently the window size is fixed to 64 even for EGPRS. Support dynamic window sizes depending on the number of PDCH. The WS can be set to b + f * N_PDCH. If the result is not valid according to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the next lower valid value (or 64). The following VTY commands are added (config-pcu node): window-size <0-1024> set base (b) value and leave f unchanged window-size <0-1024> <0-256> set base (b) and factor (f) Sponsored-by: On-Waves ehf
2016-01-19 14:53:30 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 3c
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 384, base(128) slots(4) ws_pdch(64)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(384)
edge: Make window size configurable Currently the window size is fixed to 64 even for EGPRS. Support dynamic window sizes depending on the number of PDCH. The WS can be set to b + f * N_PDCH. If the result is not valid according to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the next lower valid value (or 64). The following VTY commands are added (config-pcu node): window-size <0-1024> set base (b) value and leave f unchanged window-size <0-1024> <0-256> set base (b) and factor (f) Sponsored-by: On-Waves ehf
2016-01-19 14:53:30 +00:00
DL TBF slots: 0x3c, N: 4, WS: 384
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to RELEASING
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS) free
tbf: Add abort method for downlink TBF Currently the is a release() function which takes care of statistics and shutdown of properly finished TBFs, but which cannot be used for aborted TBFs. This commit add an abort() method which handles unacked RLC blocks as lost and doesn't start a release timer. This method will be invoked by tbf_free() for downlink TBF. Sponsored-by: On-Waves ehf
2016-01-21 19:42:40 +00:00
PDCH(TS 2, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
PDCH(TS 3, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
PDCH(TS 5, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS)
edge: Make window size configurable Currently the window size is fixed to 64 even for EGPRS. Support dynamic window sizes depending on the number of PDCH. The WS can be set to b + f * N_PDCH. If the result is not valid according to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the next lower valid value (or 64). The following VTY commands are added (config-pcu node): window-size <0-1024> set base (b) value and leave f unchanged window-size <0-1024> <0-256> set base (b) and factor (f) Sponsored-by: On-Waves ehf
2016-01-19 14:53:30 +00:00
Destroying MS object, TLLI = 0x00000000
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
TX: Immediate Assignment Uplink (AGCH)
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
MS supports EGPRS multislot class 1.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/1
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Setting Control TS 7
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) setting EGPRS UL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN EGPRS) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) (TRX=0, TS=7)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes state from ASSIGN to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=0 CV=15
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS)', TA=7
Got MS: TLLI = 0xf1223344, TA = 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/1
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 7
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) [DOWNLINK] START
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) appending 256 bytes
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
TX: Immediate Assignment Uplink (AGCH)
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
MS supports EGPRS multislot class 1.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/1
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Setting Control TS 7
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) setting EGPRS UL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN EGPRS) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
TBF flow: unit test compilation error fix The test failure was introduced by 9bbe1600cc02e1b538380393edb1dcdabe9247a2 "Fix Timing Advance handling": between patch build checking and patch submission, a new section was added to TbfTest.cpp which also needs adjustment. Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de> Change-Id: If077da5f21fd5cba54556f1dead05a1bc4ea5540
2016-09-12 07:16:32 +00:00
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) (TRX=0, TS=7)
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes state from ASSIGN to FLOW
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=0 CV=15
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=1)
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=1, SPB=2, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 1 storing in window (1..64)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(2) cs(MCS-3) data block with BSN (1), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) First seg is received second seg is not received set the status to first seg received
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=1)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=1, SPB=3, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 1 storing in window (1..64)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(3) cs(MCS-3) data block with BSN (1), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Second seg is received first seg is already present set the status to complete
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Upgrading to MCS6
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=74, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=74)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=74, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=1 CV=7
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because MS is stalled.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes UL ACK state from GPRS_RLCMAC_UL_ACK_NONE to GPRS_RLCMAC_UL_ACK_SEND_ACK
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=2 .. V(R)=2)
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=2, SPB=3, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 2 storing in window (2..65)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(3) cs(MCS-3) data block with BSN (2), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Second seg is received first seg is not received set the status to second seg received
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=2 .. V(R)=2)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=2, SPB=2, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 2 storing in window (2..65)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(2) cs(MCS-3) data block with BSN (2), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) First seg is received second seg is already present set the status to complete
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Upgrading to MCS6
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=74, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=74)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=74, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=2 CV=7
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because MS is stalled.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=3 .. V(R)=3)
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=3, SPB=1, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 3 storing in window (3..66)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(1) cs(MCS-3) data block with BSN (3), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) spb(1) Not supported SPB for this EGPRS configuration
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=3 .. V(R)=3)
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=3, SPB=2, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 3 storing in window (3..66)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(2) cs(MCS-3) data block with BSN (3), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) First seg is received second seg is not received set the status to first seg received
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=3 .. V(R)=3)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=3, SPB=3, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 3 storing in window (3..66)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(3) cs(MCS-3) data block with BSN (3), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Second seg is received first seg is already present set the status to complete
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Upgrading to MCS6
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=74, data=82 02 83 03 84 04 85 05 86 06 87 07 88 08 89 09 8a 0a 8b 0b 8c 0c 8d 0d 8e 0e 8f 0f 90 10 91 11 92 12 93 13 94 82 02 83 03 84 04 85 05 86 06 87 07 88 08 89 09 8a 0a 8b 0b 8c 0c 8d 0d 8e 0e 8f 0f 90 10 91 11 92 12 93 13 94
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=74)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=74, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=3 CV=7
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because MS is stalled.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=4 .. V(R)=4)
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=4, SPB=2, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 4 storing in window (4..67)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(2) cs(MCS-3) data block with BSN (4), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) First seg is received second seg is not received set the status to first seg received
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=4 .. V(R)=4)
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=4, SPB=2, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 4 storing in window (4..67)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(2) cs(MCS-3) data block with BSN (4), TFI(0).
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=4 .. V(R)=4)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=4, SPB=3, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 4 storing in window (4..67)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(3) cs(MCS-3) data block with BSN (4), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Second seg is received first seg is already present set the status to complete
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Upgrading to MCS6
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=74, data=82 02 83 03 84 04 85 05 86 06 87 07 88 08 89 09 8a 0a 8b 0b 8c 0c 8d 0d 8e 0e 8f 0f 90 10 91 11 92 12 93 13 94 82 02 83 03 84 04 85 05 86 06 87 07 88 08 89 09 8a 0a 8b 0b 8c 0c 8d 0d 8e 0e 8f 0f 90 10 91 11 92 12 93 13 94
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=74)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=74, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=4 CV=7
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because MS is stalled.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=5 .. V(R)=5)
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=5, SPB=3, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 5 storing in window (5..68)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(3) cs(MCS-3) data block with BSN (5), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Second seg is received first seg is not received set the status to second seg received
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got MCS-3 RLC block: R=1, SI=1, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=5 .. V(R)=5)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=5, SPB=2, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 5 storing in window (5..68)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got SPB(2) cs(MCS-3) data block with BSN (5), TFI(0).
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) First seg is received second seg is already present set the status to complete
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Upgrading to MCS6
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=74, data=82 02 83 03 84 04 85 05 86 06 87 07 88 08 89 09 8a 0a 8b 0b 8c 0c 8d 0d 8e 0e 8f 0f 90 10 91 11 92 12 93 13 94 82 02 83 03 84 04 85 05 86 06 87 07 88 08 89 09 8a 0a 8b 0b 8c 0c 8d 0d 8e 0e 8f 0f 90 10 91 11 92 12 93 13 94
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=74)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=74, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=5 CV=7
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because MS is stalled.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS)', TA=7
Got MS: TLLI = 0xf1223344, TA = 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/1
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add support for SPB handling for EGPRS UL TBF This patch will modify the EGPRS UL TBF flow to support Split block handling. This patch also contains test suite modification for SPB UL. Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. The scope of Unit testing is limited. Change-Id: I39ca53218b6e0982abc2ab9c703c24c8bf0a09c0
2016-07-26 12:56:21 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 7
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) [DOWNLINK] START
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) appending 256 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 10 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) (TRX=0, TS=4)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 10, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-1): 14 15 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-1): 07 00 00 16 28 2a 02 02 02 02 02 02 02 02 02 02 86 80 03 56 56 56 56 56 56 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 512 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=512)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-1): 07 40 00 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 2, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 2, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 2, MCS-1): 07 80 00 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 3, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 3, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 3 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 3, MCS-1): 07 c0 00 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 4, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 4, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 4, MCS-1): 07 00 01 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 5, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 5, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 5 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 5, MCS-1): 07 40 01 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 6, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 6, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 6, MCS-1): 07 80 01 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 7, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 7, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 7 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 7, MCS-1): 07 c0 01 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 8, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 8, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 8, MCS-1): 07 00 02 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 9, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 9, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 9 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 9, MCS-1): 07 40 02 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 10, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 10, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 10 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 10, MCS-1): 07 80 02 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 11, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 11, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 11 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 11, MCS-1): 07 c0 02 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 12, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 12, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 12 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 12, MCS-1): 07 00 03 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==13)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 13, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 13, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 13 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 13)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 13, MCS-1): 07 40 03 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==14)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 14, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 14, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 14 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 14)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 14, MCS-1): 07 80 03 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==15)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 15, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 15, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 15 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 15)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 15, MCS-1): 07 c0 03 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==16)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 16, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 16, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 16 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 16)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 16, MCS-1): 07 00 04 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==17)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 17, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 17, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 17 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 17)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 17, MCS-1): 07 40 04 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==18)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 18, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 18, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 18 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 18)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 18, MCS-1): 07 80 04 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==19)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 19, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 19, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 19 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 19)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 19, MCS-1): 07 c0 04 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==20)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 20, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 20, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 20 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 20)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 20, MCS-1): 07 00 05 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==21)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 21, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 21, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 21 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 21)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 21, MCS-1): 07 40 05 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==22)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 22, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 22, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 22 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 22)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 22, MCS-1): 07 80 05 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==23)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 23, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 23, MCS-1): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 23 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 23)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 23, MCS-1): 07 c0 05 96 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==24)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 24, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=512
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 14, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=14
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 24, MCS-1): 0c 1d 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 24 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 24)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 24, MCS-1): 07 00 06 16 18 3a 02 02 02 02 02 02 86 80 03 56 56 56 56 56 56 56 56 56 56 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 10 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) (TRX=0, TS=4)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 16, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=16
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-2): 14 21 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-2): 07 00 00 12 28 42 02 02 02 02 02 02 02 02 02 02 86 80 03 56 56 56 56 56 56 56 56 56 56 56 56 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 512 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=512)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-2): 07 40 00 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 2, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 2, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 2, MCS-2): 07 80 00 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 3, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 3, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 3 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 3, MCS-2): 07 c0 00 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 4, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 4, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 4, MCS-2): 07 00 01 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 5, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 5, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 5 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 5, MCS-2): 07 40 01 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 6, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 6, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 6, MCS-2): 07 80 01 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 7, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 7, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 7 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 7, MCS-2): 07 c0 01 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 8, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 8, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 8, MCS-2): 07 00 02 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 9, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 9, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 9 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 9, MCS-2): 07 40 02 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 10, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 10, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 10 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 10, MCS-2): 07 80 02 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 11, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 11, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 11 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 11, MCS-2): 07 c0 02 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 12, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 12, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 12 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 12, MCS-2): 07 00 03 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==13)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 13, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 13, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 13 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 13)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 13, MCS-2): 07 40 03 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==14)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 14, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 14, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 14 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 14)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 14, MCS-2): 07 80 03 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==15)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 15, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 15, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 15 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 15)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 15, MCS-2): 07 c0 03 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==16)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 16, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 16, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 16 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 16)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 16, MCS-2): 07 00 04 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==17)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 17, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 17, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 17 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 17)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 17, MCS-2): 07 40 04 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==18)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 18, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 18, MCS-2): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 18 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 18)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 18, MCS-2): 07 80 04 92 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==19)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 19, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=512
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 18, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=18
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 19, MCS-2): 10 25 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 19 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 19)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 19, MCS-2): 07 c0 04 12 20 4a 02 02 02 02 02 02 02 02 86 80 03 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 10 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) (TRX=0, TS=4)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 25, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=25
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-3): 14 33 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-3): 07 00 00 06 28 66 02 02 02 02 02 02 02 02 02 02 86 80 03 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 512 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=512)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-3): 07 40 00 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 2, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 2, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 2, MCS-3): 07 80 00 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 3, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 3, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 3 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 3, MCS-3): 07 c0 00 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 4, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 4, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 4, MCS-3): 07 00 01 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 5, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 5, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 5 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 5, MCS-3): 07 40 01 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 6, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 6, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 6, MCS-3): 07 80 01 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 7, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 7, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 7 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 7, MCS-3): 07 c0 01 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 8, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 8, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 8, MCS-3): 07 00 02 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 9, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 9, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 9 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 9, MCS-3): 07 40 02 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 10, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 10, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 10 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 10, MCS-3): 07 80 02 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 11, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 11, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 11 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 11, MCS-3): 07 c0 02 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 12, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 12, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 12 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 12, MCS-3): 07 00 03 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==13)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 13, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 13, MCS-3): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 13 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 13)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 13, MCS-3): 07 40 03 86 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==14)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 14, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=512
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 6, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 14, MCS-3): 3f 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 14 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 14)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 14, MCS-3): 07 80 03 06 7e 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 86 80 03 56 56 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==15)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 15, CS=MCS-3
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 34, drained_since=4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=34
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 15, MCS-3): 02 45 2b 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 15 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 15)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 15, MCS-3): 07 c0 03 06 04 8a 56 86 80 03 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 10 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) (TRX=0, TS=4)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 32, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=32
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-4): 14 41 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-4): 07 00 00 00 28 82 02 02 02 02 02 02 02 02 02 02 86 80 03 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 512 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=512)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-4): 07 40 00 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 2, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 2, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 2, MCS-4): 07 80 00 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 3, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 3, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 3 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 3, MCS-4): 07 c0 00 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 4, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 4, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 4, MCS-4): 07 00 01 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 5, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 5, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 5 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 5, MCS-4): 07 40 01 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 6, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 6, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 6, MCS-4): 07 80 01 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 7, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 7, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 7 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 7, MCS-4): 07 c0 01 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 8, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 8, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 8, MCS-4): 07 00 02 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 9, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 9, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 9 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 9, MCS-4): 07 40 02 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 10, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 10, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 10 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 10, MCS-4): 07 80 02 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 11, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 11, MCS-4): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 11 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 11)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 11, MCS-4): 07 c0 02 80 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=4
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 12, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=512
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 14, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=14
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 12, MCS-4): 38 1d 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 12 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 12)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 12, MCS-4): 07 00 03 00 70 3a 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 86 80 03 56 56 56 56 56 56 56 56 56 56 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 10 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) (TRX=0, TS=4)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 44, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=44
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-5): 14 59 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-5): 07 00 00 08 45 56 40 40 40 40 40 40 40 40 40 c0 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 512 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=512)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-5): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-5): 07 40 00 58 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 2, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 2, MCS-5): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 2, MCS-5): 07 80 00 58 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 3, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 3, MCS-5): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 3 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 3, MCS-5): 07 c0 00 58 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 4, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 4, MCS-5): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 4, MCS-5): 07 00 01 58 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 5, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 5, MCS-5): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 5 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 5, MCS-5): 07 40 01 58 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 6, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 6, MCS-5): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 6, MCS-5): 07 80 01 58 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 7, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 7, MCS-5): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 7 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 7, MCS-5): 07 c0 01 58 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 8, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 8, MCS-5): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 8, MCS-5): 07 00 02 58 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 9, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 9, MCS-5): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 9 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 9, MCS-5): 07 40 02 58 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 10, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=512
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 46, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=46
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 10, MCS-5): 10 5d 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 10 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 10, MCS-5): 07 80 02 08 44 57 40 40 40 40 40 40 40 c0 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 10 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) (TRX=0, TS=4)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 62, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=62
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-6): 14 7d 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-6): 07 00 00 00 45 5f 40 40 40 40 40 40 40 40 40 c0 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 512 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=512)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-6): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-6): 07 40 00 50 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 2, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 2, MCS-6): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 2, MCS-6): 07 80 00 50 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 3, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 3, MCS-6): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 3 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 3, MCS-6): 07 c0 00 50 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 4, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 4, MCS-6): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 4, MCS-6): 07 00 01 50 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 5, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 5, MCS-6): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 5 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 5, MCS-6): 07 40 01 50 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 6, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 6, MCS-6): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 6, MCS-6): 07 80 01 50 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 7, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=512
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 6, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 7, MCS-6): 89 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 7 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 7, MCS-6): 07 c0 01 40 62 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 c0 10 70 c0 ca 0a
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 8, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 71, drained_since=5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=71
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 8, MCS-6): 02 8f 2b 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 8, MCS-6): 07 00 02 80 c0 e3 ca 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 10 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) (TRX=0, TS=4)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 44, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=44
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-7): 14 59 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Restarting at BSN 0, because all blocks have been transmitted (FLOW).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-5): 07 00 00 08 45 56 40 40 40 40 40 40 40 40 40 c0 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 512 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(7) last_mcs(5) demanded_mcs(7) cs_trans(7) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=512)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-7): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-7): 07 00 00 02 b8 50 64 05 04 04 04 04 04 04 04 04 04 0c 01 07 ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 2, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 2, MCS-7): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 3, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 3, MCS-7): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 2, MCS-7): 07 80 00 02 a0 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 4, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 4, MCS-7): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 5, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 5, MCS-7): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 4, MCS-7): 07 00 01 02 a0 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 6, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 6, MCS-7): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 7, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 7, MCS-7): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 6, MCS-7): 07 80 01 02 a0 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 8, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 8, MCS-7): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 9, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 9, MCS-7): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 9)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 8, MCS-7): 07 00 02 02 a0 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 10, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=512
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 46, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=46
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 10, MCS-7): 10 5d 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Restarting at BSN 0, because all blocks have been transmitted (FLOW).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 10 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 10, MCS-5): 07 80 02 08 44 57 40 40 40 40 40 40 40 c0 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 10 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) (TRX=0, TS=4)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-8
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 56, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=56
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-8): 14 71 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Restarting at BSN 0, because all blocks have been transmitted (FLOW).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-8): 07 00 00 00 60 50 c4 05 04 04 04 04 04 04 04 04 04 0c 01 07 ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac 40 11 17 10 10 10 10 10 10 10 10 10 30 04 1c b0 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 02
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 512 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(8) last_mcs(8) demanded_mcs(8) cs_trans(8) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-8
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=512)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-8): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-8): 07 00 00 02 88 50 c4 05 04 04 04 04 04 04 04 04 04 0c 01 07 ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 2, CS=MCS-8
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 2, MCS-8): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 3, CS=MCS-8
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 3, MCS-8): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 2, MCS-8): 07 80 00 02 58 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 4, CS=MCS-8
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 4, MCS-8): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 5, CS=MCS-8
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 5, MCS-8): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 4, MCS-8): 07 00 01 02 58 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 6, CS=MCS-8
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 6, MCS-8): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 7, CS=MCS-8
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 7, MCS-8): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 6, MCS-8): 07 80 01 02 58 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 8, CS=MCS-8
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=512
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 30, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=30
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 8, MCS-8): 48 3d 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Restarting at BSN 0, because all blocks have been transmitted (FLOW).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 8, MCS-8): 07 00 02 00 60 20 f5 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 0c 01 07 ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac 80 d4 13 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 30 04 1c b0 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 02
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 10 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) New and old TBF are the same.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Assignment polling on UNKNOWN (FN=13, TS=4)
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) (TRX=0, TS=4)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=10)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 62, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=62
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-9): 14 7d 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Restarting at BSN 0, because all blocks have been transmitted (FLOW).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-6): 07 00 00 00 45 5f 40 40 40 40 40 40 40 40 40 c0 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 512 bytes
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Received RTS for PDCH: TRX=0 TS=4 FN=8 block_nr=2 scheduling free USF for polling at FN=13 of TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS)
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(9) last_mcs(6) demanded_mcs(9) cs_trans(9) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=512)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-9): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-9): 07 00 00 02 20 50 f4 05 04 04 04 04 04 04 04 04 04 0c 01 07 ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac ac 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 2, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 2, MCS-9): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 3, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 3, MCS-9): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 2 BSN2 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 3)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 2, MCS-9): 07 80 00 02 00 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 4, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 4, MCS-9): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 5, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 5, MCS-9): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 4 BSN2 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 5)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 4, MCS-9): 07 00 01 02 00 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 14 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 00
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 6, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 6, MCS-9): 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 7, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=512
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 6, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 7, MCS-9): 89 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 43 c0 01 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 6 BSN2 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 6)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 7)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 6, MCS-9): 07 80 01 02 00 05 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 90 18 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 30 04 1c b0 b2 02
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
Scheduling data message at RTS for DL TFI=0 (TRX=0, TS=4) prio=3
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 8, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 71, drained_since=5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=71
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 8, MCS-9): 02 8f 2b 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Restarting at BSN 0, because all blocks have been transmitted (FLOW).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 8)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Polling is already scheduled
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 8, MCS-6): 07 00 02 80 c0 e3 ca 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_WAIT_ACK to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
tbf/tests: Add tests for EGPRS TBF establishment Add a test for EGPRS two phase access based on RA caps. Add a test for DL TBFs where data block are encoded with each MCS. Sponsored-by: On-Waves ehf
2016-02-04 10:09:19 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-6): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-6): 07 00 00 10 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d 4e 8e ce 0e 4f 8f cf 0f 50 90 d0 10 51 91 d1 11 52 12
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(6) last_mcs(6) demanded_mcs(6) cs_trans(6) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-6): 07 00 00 12 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d 4e 8e ce 0e 4f 8f cf 0f 50 90 d0 10 51 91 d1 11 52 12
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-1): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-1): 07 00 00 96 00 02 04 06 08 0a 0c 0e 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(1) last_mcs(1) demanded_mcs(1) cs_trans(1) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-1): 07 00 00 98 00 02 04 06 08 0a 0c 0e 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-2
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-2): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-2): 07 00 00 92 00 02 04 06 08 0a 0c 0e 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 2c 2e 30 32 34 36 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(2) last_mcs(2) demanded_mcs(2) cs_trans(2) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-2): 07 00 00 94 00 02 04 06 08 0a 0c 0e 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 2c 2e 30 32 34 36 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-5): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-5): 07 00 00 18 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=100
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 10, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-5): 58 15 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 61 62 63 43 c0 01 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Acknowledgement polling on UNKNOWN (FN=21, TS=4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled Ack/Nack polling on FN=21, TS=4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-5): 0f 40 00 08 56 05 4e 8e ce 0e 4f 8f cf 0f 50 90 d0 10 51 91 d1 11 52 92 d2 12 53 93 d3 13 54 94 d4 14 55 95 d5 15 56 96 d6 16 57 97 d7 17 58 98 d8 d8 10 70 c0 ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(5) last_mcs(5) demanded_mcs(7) cs_trans(7) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(5) last_mcs(5) demanded_mcs(7) cs_trans(7) arq_type(1) bsn(1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-7): 07 00 00 02 c0 01 04 08 0c 10 14 18 1c 20 24 28 2c 30 34 38 3c 40 44 48 4c 50 54 58 5c 60 64 68 6c 70 74 78 7c 80 84 88 8c 90 94 98 9c a0 a4 a8 ac b0 b4 b8 bc c0 c4 c8 cc d0 d4 d8 dc 80 55 81 93 a3 b3 c3 d3 e3 f3 03 14 24 34 44 54 64 74 84 94 a4 b4 c4 d4 e4 f4 04 15 25 35 45 55 65 75 85 95 a5 b5 c5 d5 e5 f5 05 16 26 36 36 04 1c b0 b2 b2 b2 b2 b2 b2 02
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-6): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-6): 07 00 00 10 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d 4e 8e ce 0e 4f 8f cf 0f 50 90 d0 10 51 91 d1 11 52 12
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=100
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 46, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=46
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-6): 34 5d 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 61 62 63 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Acknowledgement polling on UNKNOWN (FN=21, TS=4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled Ack/Nack polling on FN=21, TS=4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-6): 0f 40 00 00 4d 97 d2 12 53 93 d3 13 54 94 d4 14 55 95 d5 15 56 96 d6 16 57 97 d7 17 58 98 d8 d8 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(6) last_mcs(6) demanded_mcs(9) cs_trans(9) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(6) last_mcs(6) demanded_mcs(9) cs_trans(9) arq_type(1) bsn(1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-9): 07 00 00 02 28 01 04 08 0c 10 14 18 1c 20 24 28 2c 30 34 38 3c 40 44 48 4c 50 54 58 5c 60 64 68 6c 70 74 78 7c 80 84 88 8c 90 94 98 9c a0 a4 a8 ac b0 b4 b8 bc c0 c4 c8 cc d0 d4 d8 dc e0 e4 e8 ec f0 f4 f8 fc 00 05 09 0d 11 15 19 1d 21 25 41 d3 a5 b4 c4 d4 e4 f4 04 15 25 35 45 55 65 75 85 95 a5 b5 c5 d5 e5 f5 05 16 26 36 36 04 1c b0 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 02
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-7): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-7
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=100
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 10, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=10
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-7): 58 15 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 61 62 63 43 c0 01 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Acknowledgement polling on UNKNOWN (FN=17, TS=4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled Ack/Nack polling on FN=17, TS=4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-7): 0f 00 00 02 a0 01 04 08 0c 10 14 18 1c 20 24 28 2c 30 34 38 3c 40 44 48 4c 50 54 58 5c 60 64 68 6c 70 74 78 7c 80 84 88 8c 90 94 98 9c a0 a4 a8 ac b0 b4 b8 bc c0 c4 c8 cc d0 d4 d8 dc 80 55 81 93 a3 b3 c3 d3 e3 f3 03 14 24 34 44 54 64 74 84 94 a4 b4 c4 d4 e4 f4 04 15 25 35 45 55 65 75 85 95 a5 b5 c5 d5 e5 f5 05 16 26 36 36 04 1c b0 b2 b2 b2 b2 b2 b2 02
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(7) last_mcs(7) demanded_mcs(5) cs_trans(5) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-5): 07 00 00 18 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(7) last_mcs(7) demanded_mcs(5) cs_trans(5) arq_type(1) bsn(1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-5): 07 40 00 08 56 05 4e 8e ce 0e 4f 8f cf 0f 50 90 d0 10 51 91 d1 11 52 92 d2 12 53 93 d3 13 54 94 d4 14 55 95 d5 15 56 96 d6 16 57 97 d7 17 58 98 d8 d8 10 70 c0 ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
Fix Timing Advance handling * initialize with invalid TA instead of making assumption that phone is located within 550 meters (TA=0) * only set valid TA Change-Id: Idfc40ff0c11bdac13d9e28fbfa4e95dfc6b735b0 Related: OS#1526
2016-07-18 10:50:18 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-9): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 1, CS=MCS-9
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=100
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Empty chunk, added LLC dummy command of size 46, drained_since=0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Complete DL frame, len=46
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 1, MCS-9): 34 5d 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 61 62 63 43 c0 01 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 2 RLC blocks, 2 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 1 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduling Ack/Nack polling, because is was requested explicitly (e.g. first final block sent).
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled DL Acknowledgement polling on UNKNOWN (FN=17, TS=4)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Scheduled Ack/Nack polling on FN=17, TS=4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-9): 0f 00 00 02 00 01 04 08 0c 10 14 18 1c 20 24 28 2c 30 34 38 3c 40 44 48 4c 50 54 58 5c 60 64 68 6c 70 74 78 7c 80 84 88 8c 90 94 98 9c a0 a4 a8 ac b0 b4 b8 bc c0 c4 c8 cc d0 d4 d8 dc e0 e4 e8 ec f0 f4 f8 fc 00 05 09 0d 11 15 19 1d 21 25 41 d3 a5 b4 c4 d4 e4 f4 04 15 25 35 45 55 65 75 85 95 a5 b5 c5 d5 e5 f5 05 16 26 36 36 04 1c b0 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 b2 02
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(9) last_mcs(9) demanded_mcs(6) cs_trans(6) arq_type(1) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-6): 07 00 00 12 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d 4e 8e ce 0e 4f 8f cf 0f 50 90 d0 10 51 91 d1 11 52 12
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==2)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(9) last_mcs(9) demanded_mcs(6) cs_trans(6) arq_type(1) bsn(1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 1
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 1, MCS-6): 07 40 00 02 4d 97 d2 12 53 93 d3 13 54 94 d4 14 55 95 d5 15 56 96 d6 16 57 97 d7 17 58 98 d8 d8 10 70 c0 ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca ca 0a
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Add test cases to support ARQ-II for EGPRS DL Retx During MCS upgradation such as MCS6->MCS9, 2 blocks which were sent separately as MCS6, will be clubbed into one MCS9 block during retransmission. Same holds good for MCS5->MCS7 transistion. During MCS reduction such as MCS9->MCS6,2 blocks which were sent together will be sent separately during the retransmission case. Same is verified through the generated log file. Currently MCS8->MCS6 transition is not supported. The retransmission MCS is being calculated from Table 8.1.1.2 of TS 44.060. The same test cases are also integration tested on Nuran 1.0 platform. Change-Id: Ia357acfe30f4dea95e00749916c6818354f93285
2016-07-12 10:20:29 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
TBF flow: unit test compilation error fix The test failure was introduced by 9bbe1600cc02e1b538380393edb1dcdabe9247a2 "Fix Timing Advance handling": between patch build checking and patch submission, a new section was added to TbfTest.cpp which also needs adjustment. Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de> Change-Id: If077da5f21fd5cba54556f1dead05a1bc4ea5540
2016-09-12 07:16:32 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-6): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-6): 07 00 00 10 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d 4e 8e ce 0e 4f 8f cf 0f 50 90 d0 10 51 91 d1 11 52 12
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(6) last_mcs(6) demanded_mcs(3) cs_trans(3) arq_type(0) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 2 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-3): 07 00 00 c6 00 02 04 06 08 0a 0c 0e 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 2c 2e 30 32 34 36 38 3a 3c 3e 40 42 44 46 48 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(6) last_mcs(3) demanded_mcs(3) cs_trans(3) arq_type(0) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 1 spb 3 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-3): 07 00 00 e6 4a 4c 4e 50 52 54 56 58 5a 5c 5e 60 62 64 66 68 6a 6c 6e 70 72 74 76 78 7a 7c 7e 80 82 84 86 88 8a 8c 8e 90 92 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
TBF flow: unit test compilation error fix The test failure was introduced by 9bbe1600cc02e1b538380393edb1dcdabe9247a2 "Fix Timing Advance handling": between patch build checking and patch submission, a new section was added to TbfTest.cpp which also needs adjustment. Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de> Change-Id: If077da5f21fd5cba54556f1dead05a1bc4ea5540
2016-09-12 07:16:32 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-5
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-5): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-5): 07 00 00 18 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(5) last_mcs(5) demanded_mcs(2) cs_trans(2) arq_type(0) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 2 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-2): 07 00 00 d2 00 02 04 06 08 0a 0c 0e 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 2c 2e 30 32 34 36 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(5) last_mcs(2) demanded_mcs(2) cs_trans(2) arq_type(0) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 1 spb 3 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-2): 07 00 00 f2 38 3a 3c 3e 40 42 44 46 48 4a 4c 4e 50 52 54 56 58 5a 5c 5e 60 62 64 66 68 6a 6c 6e 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
TBF flow: unit test compilation error fix The test failure was introduced by 9bbe1600cc02e1b538380393edb1dcdabe9247a2 "Fix Timing Advance handling": between patch build checking and patch submission, a new section was added to TbfTest.cpp which also needs adjustment. Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de> Change-Id: If077da5f21fd5cba54556f1dead05a1bc4ea5540
2016-09-12 07:16:32 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-4
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-4): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-4): 07 00 00 80 00 02 04 06 08 0a 0c 0e 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 2c 2e 30 32 34 36 38 3a 3c 3e 40 42 44 46 48 4a 4c 4e 50 52 54 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(4) last_mcs(4) demanded_mcs(1) cs_trans(1) arq_type(0) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 2 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-1): 07 00 00 d6 00 02 04 06 08 0a 0c 0e 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(4) last_mcs(1) demanded_mcs(1) cs_trans(1) arq_type(0) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 1 spb 3 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-1): 07 00 00 f6 2c 2e 30 32 34 36 38 3a 3c 3e 40 42 44 46 48 4a 4c 4e 50 52 54 56 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
TBF flow: unit test compilation error fix The test failure was introduced by 9bbe1600cc02e1b538380393edb1dcdabe9247a2 "Fix Timing Advance handling": between patch build checking and patch submission, a new section was added to TbfTest.cpp which also needs adjustment. Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de> Change-Id: If077da5f21fd5cba54556f1dead05a1bc4ea5540
2016-09-12 07:16:32 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) appending 100 bytes
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Sending new block at BSN 0, CS=MCS-6
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Dequeue next LLC (len=100)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) data block (BSN 0, MCS-6): 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-6): 07 00 00 10 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d 4e 8e ce 0e 4f 8f cf 0f 50 90 d0 10 51 91 d1 11 52 12
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(6) last_mcs(6) demanded_mcs(3) cs_trans(3) arq_type(0) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 0 spb 2 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-3): 07 00 00 c6 00 02 04 06 08 0a 0c 0e 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 2c 2e 30 32 34 36 38 3a 3c 3e 40 42 44 46 48 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(6) last_mcs(3) demanded_mcs(3) cs_trans(3) arq_type(0) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 1 spb 3 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-3): 07 00 00 e6 4a 4c 4e 50 52 54 56 58 5a 5c 5e 60 62 64 66 68 6a 6c 6e 70 72 74 76 78 7a 7c 7e 80 82 84 86 88 8a 8c 8e 90 92 00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink (V(A)==0 .. V(S)==1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) initial_cs_dl(6) last_mcs(3) demanded_mcs(6) cs_trans(6) arq_type(0) bsn(0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Resending BSN 0
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) need_padding 0 spb_status 2 spb 0 (BSN1 0 BSN2 -1)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying 1 RLC blocks, 1 BSNs
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Copying data unit 0 (BSN 0)
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) msg block (BSN 0, MCS-6): 07 00 00 10 40 80 c0 00 41 81 c1 01 42 82 c2 02 43 83 c3 03 44 84 c4 04 45 85 c5 05 46 86 c6 06 47 87 c7 07 48 88 c8 08 49 89 c9 09 4a 8a ca 0a 4b 8b cb 0b 4c 8c cc 0c 4d 8d cd 0d 4e 8e ce 0e 4f 8f cf 0f 50 90 d0 10 51 91 d1 11 52 12
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) Final ACK received.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to WAIT RELEASE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) starting timer T3193 [release (DL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_SEND_ASS to GPRS_RLCMAC_DL_ASS_NONE
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=WAIT RELEASE EGPRS) changes state from WAIT RELEASE to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) stopping timer T3193 [freeing TBF]
Modify EGPRS DL TBF flow to support SPB Modify the EGPRS DL TBF flow to support Split block during Retx. This patch will also Upgrade the test suite with test cases to validate the EGPRS Downlink SPB for Retransmission Scenarios like MCS6->MCS3, MCS4->MCS1, MCS5->MCS2, MCS9->MCS3 MCS7->MCS2, MCS8->MCS3 have been simulated and Integration tested in NuRAN 1.0 hardware thoroughly. Change-Id: I242afdd8ae7622dec8593b26382ad66bad5b9516
2016-08-22 11:51:10 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
TX: Immediate Assignment Uplink (AGCH)
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
MS supports EGPRS multislot class 1.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/1
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Setting Control TS 7
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) setting EGPRS UL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN EGPRS) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
TBF flow: unit test compilation error fix The test failure was introduced by 9bbe1600cc02e1b538380393edb1dcdabe9247a2 "Fix Timing Advance handling": between patch build checking and patch submission, a new section was added to TbfTest.cpp which also needs adjustment. Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de> Change-Id: If077da5f21fd5cba54556f1dead05a1bc4ea5540
2016-09-12 07:16:32 +00:00
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) (TRX=0, TS=7)
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes state from ASSIGN to FLOW
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Got CS-1 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=184
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got CS-1 RLC data block: CV=15, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=24
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=20, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=20)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=20, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=0 CV=15
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Got MCS-3 RLC block: R=1, SI=0, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=1)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=1, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 1 storing in window (1..64)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=37, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=37)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=37, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=1 CV=7
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes UL ACK state from GPRS_RLCMAC_UL_ACK_NONE to GPRS_RLCMAC_UL_ACK_NONE
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Got MCS-3 RLC block: R=1, SI=0, TFI=0, CPS=5, RSB=0, rc=329
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=2 .. V(R)=2)
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-3 RLC data block: CV=7, BSN=4, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 4 storing in window (2..65)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=37, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes UL ACK state from GPRS_RLCMAC_UL_ACK_NONE to GPRS_RLCMAC_UL_ACK_NONE
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS)', TA=7
Got MS: TLLI = 0xf1223344, TA = 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/1
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 7
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) [DOWNLINK] START
EGPRS: PUAN encoding: add test case to show wrong urbb_len issue This patch adds a test case which expects a current bug with EGPRS PUAN encoding when VQ != VR. The test's expectation is corrected along with the bugfix in a subsequent commit Adds test_tbf_puan_urbb_len to describe the following bug: EGPRS PUAN encoding disregards the urbb_len, leading to identical PUAN messages regardless of the urbb_len. Related: OS#1793 Change-Id: I00662a564f64c0c83627401ae8f7bfef0f0a5de8
2016-08-25 11:07:30 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) appending 256 bytes
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
DL: add test case to show wrong window size This patch adds a test case test_tbf_update_ws. Which expects a current bug with DL window size calculation. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1808 Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
2016-08-30 10:09:04 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
DL: add test case to show wrong window size This patch adds a test case test_tbf_update_ws. Which expects a current bug with DL window size calculation. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1808 Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
2016-08-30 10:09:04 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
Slot Allocation (Algorithm B) for class 11
- Rx=4 Tx=3 Sum Rx+Tx=5 Tta=3 Ttb=1 Tra=2 Trb=1 Type=1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Possible DL/UL slots: (TS=0)"..CCCC.."(TS=7)
- Selected DL slots: (TS=0)"..ddDd.."(TS=7), single
Using single slot at TS 4 for DL
- Reserved DL/UL slots: (TS=0)"....C..."(TS=7)
- Assigning DL TS 4
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
DL: add test case to show wrong window size This patch adds a test case test_tbf_update_ws. Which expects a current bug with DL window size calculation. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1808 Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
2016-08-30 10:09:04 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 192, base(128) slots(1) ws_pdch(64)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(192)
DL: add test case to show wrong window size This patch adds a test case test_tbf_update_ws. Which expects a current bug with DL window size calculation. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1808 Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
2016-08-30 10:09:04 +00:00
DL TBF slots: 0x10, N: 1, WS: 192
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF update **********
DL: add test case to show wrong window size This patch adds a test case test_tbf_update_ws. Which expects a current bug with DL window size calculation. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1808 Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
2016-08-30 10:09:04 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Searching for first unallocated TFI: TRX=0
Found TFI=0.
- Selected DL slots: (TS=0)"..DDDD.."(TS=7)
Using 4 slots for DL
- Assigning DL TS 2
PDCH(TS 2, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
- Assigning DL TS 3
PDCH(TS 3, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
- Assigning DL TS 4
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
- Assigning DL TS 5
PDCH(TS 5, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 384, base(128) slots(4) ws_pdch(64)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(384)
Fix EGPRS DL window calculation during tbf update Earlier there was no handling for recalculation of DL window size during tbf update. Which has been fixed in this patch. Related: OS#1808 Change-Id: I41aa807068520460fd665a55e3529e60f6bbb630
2016-09-15 12:24:46 +00:00
DL TBF slots: 0x3c, N: 4, WS: 384
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to RELEASING
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS) free
DL: add test case to show wrong window size This patch adds a test case test_tbf_update_ws. Which expects a current bug with DL window size calculation. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1808 Change-Id: I4659494c6f93ae89e4cc4ac79fff5fcaf2d23699
2016-08-30 10:09:04 +00:00
PDCH(TS 2, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
PDCH(TS 3, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
PDCH(TS 5, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0x00000000
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
MS requests single block allocation
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
TX: Immediate Assignment Uplink (AGCH)
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
MS supports EGPRS multislot class 1.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/1
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Setting Control TS 7
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) setting EGPRS UL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN EGPRS) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Revert "tbf: Add state WAIT_ASSIGN" This reverts commit f1a7b8fc6651f92a8b7f3f27b7ca05d07f4e44e0. Conflicts: tests/tbf/TbfTest.err The commit broke GPRS service at least for osmo-bts-sysmo on a SysmoBTS 1002 with current master of osmo-bts (ef30f50d5d6d5f863fc147d05ccdceb89284934e). The error observed is the following log output (was viewing both osmo-bts-sysmo and osmo-pcu logs interleaved): <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission <0002> tbf.cpp:893 - Assignment was on CCCH <0002> tbf.cpp:899 - No uplink data received yet <0007> l1sap.c:904 RACH for packet access <0001> pcu_l1_if.cpp:311 RACH request received: sapi=1 qta=0, ra=121, fn=13653 [repeat] When removing this single commit from current osmo-pcu master, GPRS service works well on SysmoBTS, with current osmo-bts master. The TbfTest.err expected output needed adjustment after the revert. Disclaimer: I am not aware of adverse effects this commit may have. I have no idea what the WAIT_ASSIGN state is used for -- further review is required. Change-Id: I1532f8e93194368cdc1e3846f82afa6d68cd5fbd
2016-06-08 13:27:40 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) (TRX=0, TS=7)
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes state from ASSIGN to FLOW
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Got MCS-4 RLC block: R=1, SI=0, TFI=0, CPS=5, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=7, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 0 storing in window (0..63)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=44)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=44, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=0 CV=7
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Got MCS-4 RLC block: R=1, SI=0, TFI=0, CPS=5, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=1)
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=7, BSN=1, SPB=0, PI=0, E=0, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 1 storing in window (1..64)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=44)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) complete UL frame len=44
EGPRS: Fix issue with row 4 of Table 10.4.14a.1 of 44.060 version 7.27.0 Release 7 row 4 of Table 10.4.14a.1 of Spec 44.060 version 7.27.0 Release 7. Says "The previous RLC data block contains a Upper Layer PDU, or a part of it, that fills precisely the previous data block and for which there is no length indicator in that RLC data block. The current RLC data block contains a Upper Layer PDU that either fills the current RLC data block precisely or continues in the next RLC data block." So when we receive block with 1st LI: value=0 and Value of E bit in the same octet as 1, we expect 2 chunks with 1st chunk as length as 0 and complete and 2nd chunk as length non zero. But with this bug we see only 1 chunk causing incorrect assembling This issue has been fixed in this patch. Related: OS#1811 Change-Id: I2cd0fca3ed28a553ede3f4b8a7d3267284dd2c9b
2016-09-15 11:54:49 +00:00
LLC [PCU -> SGSN] TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) len=44
No bctx
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 2 starts at offset 1, length=43, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=1 CV=7
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS)', TA=7
Got MS: TLLI = 0xf1223344, TA = 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/1
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 7
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) [DOWNLINK] START
EGPRS: add test case to show LI decoding bug This patch adds a test case test_tbf_li_decoding which expects a current bug with LI decoding for row 4 of Table 10.4.14a.1 in 44.060 version 7.27.0 Release 7. The test's expectation is corrected along with the bug fix in a subsequent commit Related: OS#1811 Change-Id: Ida410dab1aa4b0cf3e15b2090586377eb19b2469
2016-09-15 11:49:54 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) appending 256 bytes
EGPRS: add test case to show EPDAN BSN out of window bug This patch adds a test case test_tbf_epdan_out_of_rx_window, which expects a current bug with EPDAN for interpretation of the bitmap explained in section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7. The specification explains that a bit within the uncompressed bitmap whose corresponding BSN is not within the transmit window shall be ignored. But current PCU implementation drops the EPDAN and does not update status of the BSN which are inside the window. The test's expectation is corrected along with the bug fix in a subsequent commit. Related: OS#1789 Change-Id: If32b67f5c05707155281128b776a90a1e3d587b2
2016-10-25 07:15:24 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
EGPRS: add test case to show EPDAN BSN out of window bug This patch adds a test case test_tbf_epdan_out_of_rx_window, which expects a current bug with EPDAN for interpretation of the bitmap explained in section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7. The specification explains that a bit within the uncompressed bitmap whose corresponding BSN is not within the transmit window shall be ignored. But current PCU implementation drops the EPDAN and does not update status of the BSN which are inside the window. The test's expectation is corrected along with the bug fix in a subsequent commit. Related: OS#1789 Change-Id: If32b67f5c05707155281128b776a90a1e3d587b2
2016-10-25 07:15:24 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
EGPRS: add test case to show EPDAN BSN out of window bug This patch adds a test case test_tbf_epdan_out_of_rx_window, which expects a current bug with EPDAN for interpretation of the bitmap explained in section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7. The specification explains that a bit within the uncompressed bitmap whose corresponding BSN is not within the transmit window shall be ignored. But current PCU implementation drops the EPDAN and does not update status of the BSN which are inside the window. The test's expectation is corrected along with the bug fix in a subsequent commit. Related: OS#1789 Change-Id: If32b67f5c05707155281128b776a90a1e3d587b2
2016-10-25 07:15:24 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 4
EGPRS: add test case to show EPDAN BSN out of window bug This patch adds a test case test_tbf_epdan_out_of_rx_window, which expects a current bug with EPDAN for interpretation of the bitmap explained in section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7. The specification explains that a bit within the uncompressed bitmap whose corresponding BSN is not within the transmit window shall be ignored. But current PCU implementation drops the EPDAN and does not update status of the BSN which are inside the window. The test's expectation is corrected along with the bug fix in a subsequent commit. Related: OS#1789 Change-Id: If32b67f5c05707155281128b776a90a1e3d587b2
2016-10-25 07:15:24 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 64, base(0) slots(1) ws_pdch(0)
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(64)
EGPRS: add test case to show EPDAN BSN out of window bug This patch adds a test case test_tbf_epdan_out_of_rx_window, which expects a current bug with EPDAN for interpretation of the bitmap explained in section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7. The specification explains that a bit within the uncompressed bitmap whose corresponding BSN is not within the transmit window shall be ignored. But current PCU implementation drops the EPDAN and does not update status of the BSN which are inside the window. The test's expectation is corrected along with the bug fix in a subsequent commit. Related: OS#1789 Change-Id: If32b67f5c05707155281128b776a90a1e3d587b2
2016-10-25 07:15:24 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) changes state from NULL to FLOW
EGPRS: add test case to show EPDAN BSN out of window bug This patch adds a test case test_tbf_epdan_out_of_rx_window, which expects a current bug with EPDAN for interpretation of the bitmap explained in section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7. The specification explains that a bit within the uncompressed bitmap whose corresponding BSN is not within the transmit window shall be ignored. But current PCU implementation drops the EPDAN and does not update status of the BSN which are inside the window. The test's expectation is corrected along with the bug fix in a subsequent commit. Related: OS#1789 Change-Id: If32b67f5c05707155281128b776a90a1e3d587b2
2016-10-25 07:15:24 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
Add compression support in EGPRS PUAN This adds compression of bitmap in PUAN. The compressed bitmap is used only if the number of bits in the bitmap does not fit in the message and there is a gain after compression. The algorithm is part of libosmocore and so there is dependency on the libosmocore for compilation. The algorithm is tested on integration setup by forcing compression. Change-Id: Id2eec4b5eb6da0ebd24054b541b09b700b9b40ba
2017-01-16 10:11:21 +00:00
ws(480)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) downlink acknowledge
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) ack: (BSN=1176)"RRRRRRRRRRIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIRRRIRRRRRRRRRRRRRRRRRRRRRRRRRRI"(BSN=1287) R=ACK I=NACK
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) DL analysis, range=1176:1288, lost=73, recv=39, skipped=0, bsn=1944, info='RRRRRRRRRRRRRRRRRRRRRRRRRRLRRRLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLRRRRRRRRRR................................................................................................................................................................................................................................................................................................................................................................................'
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) V(B): (V(A)=1186)"NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNAAANAAAAAAAAAAAAAAAAAAAAAAAAAA"(V(S)-1=1287) A=Acked N=Nacked U=Unacked X=Resend-Unacked I=Invalid
EGPRS: fix for EPDAN out of window Fix alignment of EPDAN outside the RLC transmit window, according to section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7. The specification explains that a bit within the uncompressed bitmap whose corresponding BSN is not within the transmit window shall be ignored. Without this fix PCU was dropping the EPDAN message and not updating the status of BSNs which are inside the RLC window. This patch updates the status of the BSNs which are inside the window and ignores the remaining bits. Related: OS#1789 Change-Id: Id07d178970f168f5389016c1eea31eb6b82057b6
2016-11-02 10:18:00 +00:00
DL packet loss of IMSI= / TLLI=0xffeeddcc: 78%
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW EGPRS) changes state from FLOW to RELEASING
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS) FIXME: Software error: Pending downlink assignment in state GPRS_RLCMAC_DL_ASS_SEND_ASS. This may not happen, because the assignment message never gets transmitted. Please be sure not to free in this state. PLEASE FIX!
EGPRS: add test case to show EPDAN BSN out of window bug This patch adds a test case test_tbf_epdan_out_of_rx_window, which expects a current bug with EPDAN for interpretation of the bitmap explained in section 9.1.8.2.4 in 44.060 version 7.27.0 Release 7. The specification explains that a bit within the uncompressed bitmap whose corresponding BSN is not within the transmit window shall be ignored. But current PCU implementation drops the EPDAN and does not update status of the BSN which are inside the window. The test's expectation is corrected along with the bug fix in a subsequent commit. Related: OS#1789 Change-Id: If32b67f5c05707155281128b776a90a1e3d587b2
2016-10-25 07:15:24 +00:00
PDCH(TS 4, TRX 0): Detaching TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS), 0 TBFs, USFs = 00, TFIs = 00000000.
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=RELEASING EGPRS)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF ends here **********
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x78 Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x78, Fn=2654167 (17,25,9)
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=0 USF=0
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x79 Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=1 USF=1
PDCH(TS 7, TRX 0): Attaching TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL), 2 TBFs, USFs = 03, TFIs = 00000003.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x79, Fn=2654167 (17,25,9)
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=1 USF=1
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7a Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=2 USF=2
PDCH(TS 7, TRX 0): Attaching TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL), 3 TBFs, USFs = 07, TFIs = 00000007.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7a, Fn=2654167 (17,25,9)
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=2 USF=2
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7b Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=3 USF=3
PDCH(TS 7, TRX 0): Attaching TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL), 4 TBFs, USFs = 0f, TFIs = 0000000f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7b, Fn=2654167 (17,25,9)
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=3 USF=3
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7c Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=4 USF=4
PDCH(TS 7, TRX 0): Attaching TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL), 5 TBFs, USFs = 1f, TFIs = 0000001f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7c, Fn=2654167 (17,25,9)
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=4 USF=4
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7d Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=5 USF=5
PDCH(TS 7, TRX 0): Attaching TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL), 6 TBFs, USFs = 3f, TFIs = 0000003f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7d, Fn=2654167 (17,25,9)
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=5 USF=5
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7e Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=6 USF=6
PDCH(TS 7, TRX 0): Attaching TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL), 7 TBFs, USFs = 7f, TFIs = 0000007f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7e, Fn=2654167 (17,25,9)
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=6 USF=6
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7f Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because no USF available
- Failed to allocate a TS, no USF available
No PDCH resource sending Immediate Assignment Uplink (AGCH) reject
Destroying MS object, TLLI = 0x00000000
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x70 Fn=2654167 qta=31 is_11bit=0:
Handle Immediate assignment reject When RACH is received, PCU will generate the Immediate assignment reject message if no resources are present. The encoding is done based on section 9.1.20 of 44.018 version 11.7.0 Release 11. This patch also includes the test case to validate the generated Immediate assignment reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I3d33e2b9746fa4f338fad0e6b63b1c5f07de6f9b
2016-11-09 10:57:00 +00:00
MS requests single block allocation
No PDCH available.
No PDCH resource for single block allocation.sending Immediate Assignment Uplink (AGCH) reject
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x73 Fn=2654167 qta=31 is_11bit=0:
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
MS requests single block allocation
RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x73, Fn=2654167 (17,25,9), SBFn=2654270
TX: Immediate Assignment Uplink (AGCH)
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=-1 USF=7
Searching for first unallocated TFI: TRX=0
Found TFI=0.
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
MS supports EGPRS multislot class 1.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=1/1
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 1
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 1
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Slot Allocation (Algorithm A) for class 1
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Setting Control TS 7
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) setting EGPRS UL window size to 192, base(128) slots(1) ws_pdch(64)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
ws(192)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=ASSIGN EGPRS) starting timer T3169 [allocation (UL-TBF)] with 0 sec. 0 microsec.
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Modifying MS object, UL TLLI: 0x00000000 -> 0xf1223344, not yet confirmed
Modifying MS object, TLLI = 0xf1223344, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) change control TS 7 -> 7 until assinment is complete.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) start Packet Uplink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Uplink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Uplink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) Scheduled UL Assignment polling on PACCH (FN=2654283, TS=7)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) (TRX=0, TS=7)
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) RX: [PCU <- BTS] Packet Control Ack
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes poll state from GPRS_RLCMAC_POLL_SCHED to GPRS_RLCMAC_POLL_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) [DOWNLINK] UPLINK ASSIGNED
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes UL ASS state from GPRS_RLCMAC_UL_ASS_WAIT_ACK to GPRS_RLCMAC_UL_ASS_NONE
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=ASSIGN EGPRS) changes state from ASSIGN to FLOW
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 0 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=44)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=44, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=0 CV=10
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=1)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=2, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 2 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=3)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=4, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 4 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=5)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=6, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 6 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=7)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=8, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 8 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=9)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=10, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 10 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=11)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=12, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 12 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=13)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=14, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 14 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=15)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=16, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 16 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=17)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=18, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 18 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=19)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=20, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 20 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=21)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=22, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 22 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=23)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=24, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 24 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=25)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=26, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 26 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=27)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=28, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 28 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=29)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=30, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 30 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=31)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=32, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 32 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=33)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=34, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 34 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=35)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=36, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 36 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=37)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=38, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 38 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because 20 frames received.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes UL ACK state from GPRS_RLCMAC_UL_ACK_NONE to GPRS_RLCMAC_UL_ACK_SEND_ACK
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=39)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=40, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 40 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=41)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=42, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 42 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=43)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=44, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 44 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=45)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=46, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 46 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=47)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=48, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 48 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=49)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=50, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 50 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=51)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=52, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 52 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=53)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=54, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 54 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=55)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=56, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 56 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=57)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=58, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 58 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=59)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=60, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 60 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=61)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=62, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 62 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=63)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=64, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 64 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=65)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=66, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 66 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=67)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=68, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 68 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=69)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=70, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 70 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=71)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=72, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 72 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=73)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=74, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 74 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=75)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=76, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 76 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=77)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=78, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 78 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because 20 frames received.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=79)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=80, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 80 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=81)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=82, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 82 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=83)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=84, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 84 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=85)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=86, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 86 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=87)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=88, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 88 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=89)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=90, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 90 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=91)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=92, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 92 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=93)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=94, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 94 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=95)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=96, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 96 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=97)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=98, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 98 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=99)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=100, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 100 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=101)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=102, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 102 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=103)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=104, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 104 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=105)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=106, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 106 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=107)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=108, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 108 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=109)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=110, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 110 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=111)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=112, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 112 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=113)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=114, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 114 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=115)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=116, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 116 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=117)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=118, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 118 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because 20 frames received.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=119)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=120, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 120 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=121)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=122, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 122 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=123)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=124, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 124 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=125)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=126, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 126 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=127)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=128, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 128 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=129)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=130, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 130 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=131)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=132, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 132 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=133)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=134, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 134 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=135)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=136, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 136 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=137)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=138, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 138 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=139)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=140, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 140 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=141)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=142, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 142 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=143)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=144, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 144 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=145)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=146, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 146 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=147)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=148, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 148 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=149)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=150, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 150 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=151)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=152, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 152 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=153)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=154, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 154 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=155)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=156, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 156 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=157)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=158, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 158 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because 20 frames received.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes UL ACK state from GPRS_RLCMAC_UL_ACK_SEND_ACK to GPRS_RLCMAC_UL_ACK_NONE
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=159)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=0, BSN=64, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 64 already received
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Received RTS for PDCH: TRX=0 TS=7 FN=2654275 block_nr=9 scheduling USF=0 for required uplink resource of UL TFI=0
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS)', TA=7
Got MS: TLLI = 0xf1223344, TA = 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=1/1
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Enabled EGPRS, mode EGPRS
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign downlink TS=7 TFI=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL EGPRS) Setting Control TS 7
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Attaching TBF to MS object, TLLI = 0xf1223344, TBF = TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Allocated: trx = 0, ul_slots = 80, dl_slots = 80
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) setting EGPRS DL window size to 192, base(128) slots(1) ws_pdch(64)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
ws(192)
Modifying MS object, TLLI: 0xf1223344 confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) [DOWNLINK] START
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Modifying MS object, TLLI = 0xf1223344, IMSI '' -> '0011223344'
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) Send dowlink assignment on PACCH, because TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) exists
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=NULL EGPRS) changes state from NULL to ASSIGN
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) starting timer T0 [assignment (PACCH)] with 2 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) appending 256 bytes
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=0, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 0 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Assembling frames: (len=44)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Frame 1 starts at offset 0, length=44, is_complete=0
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) No gaps in received block, last block: BSN=0 CV=10
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=1)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=2, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 2 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=3)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=4, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 4 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=5)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=6, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 6 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=7)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=8, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 8 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=9)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=10, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 10 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=11)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=12, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 12 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=13)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=14, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 14 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=15)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=16, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 16 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=17)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=18, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 18 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=19)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=20, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 20 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=21)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=22, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 22 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=23)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=24, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 24 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=25)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=26, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 26 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=27)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=28, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 28 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=29)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=30, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 30 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=31)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=32, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 32 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=33)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=34, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 34 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=35)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=36, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 36 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because 20 frames received.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes UL ACK state from GPRS_RLCMAC_UL_ACK_NONE to GPRS_RLCMAC_UL_ACK_SEND_ACK
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=37)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=38, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 38 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes UL ACK state from GPRS_RLCMAC_UL_ACK_SEND_ACK to GPRS_RLCMAC_UL_ACK_NONE
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=1 .. V(R)=39)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=0, BSN=64, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 64 storing in window (1..192)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Received RTS for PDCH: TRX=0 TS=7 FN=2654279 block_nr=10 scheduling USF=0 for required uplink resource of UL TFI=0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) start Packet Downlink Assignment (PACCH)
+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++
------------------------- TX : Packet Downlink Assignment -------------------------
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduled DL Assignment polling on PACCH (FN=2654292, TS=7)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) (TRX=0, TS=7)
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS)', TA=7
Got MS: TLLI = 0xf1223344, TA = 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) appending 256 bytes
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=0)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=80, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 80 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=81)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=81, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 81 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=82)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=82, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 82 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=83)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=83, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 83 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=84)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=84, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 84 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=85)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=85, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 85 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=86)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=86, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 86 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=87)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=87, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 87 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=88)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=88, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 88 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=89)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=89, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 89 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=90)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=90, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 90 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=91)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=91, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 91 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=92)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=92, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 92 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=93)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=93, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 93 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=94)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=94, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 94 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=95)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=95, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 95 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=96)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=96, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 96 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=97)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=97, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 97 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because 20 frames received.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes UL ACK state from GPRS_RLCMAC_UL_ACK_NONE to GPRS_RLCMAC_UL_ACK_SEND_ACK
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=98)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=98, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 98 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=99)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=99, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 99 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=100)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=100, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 100 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=101)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=101, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 101 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=102)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=102, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 102 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=103)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=103, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 103 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=104)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=104, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 104 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=105)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=105, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 105 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=106)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=106, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 106 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=107)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=107, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 107 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=108)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=108, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 108 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=109)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=109, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 109 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=110)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=110, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 110 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=111)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=111, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 111 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=112)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=112, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 112 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=113)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=113, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 113 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=114)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=114, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 114 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=115)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=115, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 115 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=116)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=116, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 116 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=117)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=117, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 117 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because 20 frames received.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=118)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=118, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 118 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=119)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=119, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 119 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=120)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=120, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 120 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=121)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=121, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 121 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=122)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=122, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 122 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=123)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=123, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 123 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=124)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=124, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 124 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=125)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=125, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 125 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=126)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=126, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 126 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=127)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=127, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 127 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=128)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=128, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 128 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=129)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=129, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 129 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=130)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=130, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 130 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=131)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=131, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 131 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=132)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=132, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 132 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=133)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=133, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 133 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=134)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=134, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 134 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=135)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=135, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 135 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=136)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=136, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 136 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=137)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=137, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 137 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because 20 frames received.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=138)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=138, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 138 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=139)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=139, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 139 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=140)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=140, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 140 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=141)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=141, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 141 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=142)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=142, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 142 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=143)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=143, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 143 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=144)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=144, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 144 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=145)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=145, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 145 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=146)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=146, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 146 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=147)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=147, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 147 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=148)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=148, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 148 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=149)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=149, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 149 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=150)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=150, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 150 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=151)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=151, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 151 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=152)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=152, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 152 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=153)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=153, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 153 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=154)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=154, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 154 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=155)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=155, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 155 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=156)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=156, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 156 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=157)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=157, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 157 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Scheduling Ack/Nack, because 20 frames received.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Sending Ack/Nack is already triggered, don't schedule!
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=158)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=158, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 158 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=159)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=10, BSN=159, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 159 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=00 80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) changes UL ACK state from GPRS_RLCMAC_UL_ACK_SEND_ACK to GPRS_RLCMAC_UL_ACK_NONE
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Got MCS-4 RLC block: R=0, SI=0, TFI=0, CPS=0, RSB=0, rc=385
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) UL DATA TFI=0 received (V(Q)=0 .. V(R)=160)
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
max_cs_ul cannot be derived (current UL CS: UNKNOWN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) restarting timer T3169 [acked (data)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) Got MCS-4 RLC data block: CV=0, BSN=64, SPB=0, PI=0, E=1, TI=0, bitoffs=33
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) BSN 64 storing in window (0..191)
TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS) data_length=44, data=80 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95
Add test case for testing PUAN This test case is for testing generation of EGPRS PUAN. Corresponding log files .ok and .err are modified. Change-Id: I18e6d4a9e90fd6453fe14187beab27dfeae8dbe9
2017-01-24 10:23:35 +00:00
Received RTS for PDCH: TRX=0 TS=7 FN=2654283 block_nr=11 scheduling USF=0 for required uplink resource of UL TFI=0
Got 'TBF(TFI=0 TLLI=0xf1223344 DIR=UL STATE=FLOW EGPRS)', TA=7
Got MS: TLLI = 0xf1223344, TA = 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xf1223344 DIR=DL STATE=ASSIGN EGPRS) appending 256 bytes
Handle packet access reject during EPDAN/PDAN with channel description When PDAN/EPDAN with channel description is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I096a3bb44a65533b9e9b091925dd5f70a8696d6
2016-11-11 11:45:10 +00:00
Searching for first unallocated TFI: TRX=0
Found TFI=0.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** DL-TBF starts here **********
Allocating DL TBF: MS_CLASS=11/11
Handle packet access reject during EPDAN/PDAN with channel description When PDAN/EPDAN with channel description is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I096a3bb44a65533b9e9b091925dd5f70a8696d6
2016-11-11 11:45:10 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
Slot Allocation (Algorithm A) for class 11
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because not enabled
- Assign downlink TS=4 TFI=0
PDCH(TS 4, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL), 1 TBFs, USFs = 00, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4
Handle packet access reject during EPDAN/PDAN with channel description When PDAN/EPDAN with channel description is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I096a3bb44a65533b9e9b091925dd5f70a8696d6
2016-11-11 11:45:10 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10
Handle packet access reject during EPDAN/PDAN with channel description When PDAN/EPDAN with channel description is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I096a3bb44a65533b9e9b091925dd5f70a8696d6
2016-11-11 11:45:10 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes DL ASS state from GPRS_RLCMAC_DL_ASS_NONE to GPRS_RLCMAC_DL_ASS_SEND_ASS
TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) changes state from NULL to FLOW
Handle packet access reject during EPDAN/PDAN with channel description When PDAN/EPDAN with channel description is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I096a3bb44a65533b9e9b091925dd5f70a8696d6
2016-11-11 11:45:10 +00:00
The MS object cannot fully confirm an unexpected TLLI: 0xffeeddcc, partly confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=DL STATE=FLOW) appending 100 bytes
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x78 Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=0 USF=0
PDCH(TS 7, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x78, Fn=2654167 (17,25,9)
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=0 USF=0
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x79 Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=1 USF=1
PDCH(TS 7, TRX 0): Attaching TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL), 2 TBFs, USFs = 03, TFIs = 00000003.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x79, Fn=2654167 (17,25,9)
TBF(TFI=1 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=1 USF=1
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7a Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=2 USF=2
PDCH(TS 7, TRX 0): Attaching TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL), 3 TBFs, USFs = 07, TFIs = 00000007.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7a, Fn=2654167 (17,25,9)
TBF(TFI=2 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=2 USF=2
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7b Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=3 USF=3
PDCH(TS 7, TRX 0): Attaching TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL), 4 TBFs, USFs = 0f, TFIs = 0000000f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7b, Fn=2654167 (17,25,9)
TBF(TFI=3 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=3 USF=3
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7c Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=4 USF=4
PDCH(TS 7, TRX 0): Attaching TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL), 5 TBFs, USFs = 1f, TFIs = 0000001f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7c, Fn=2654167 (17,25,9)
TBF(TFI=4 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=4 USF=4
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7d Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=5 USF=5
PDCH(TS 7, TRX 0): Attaching TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL), 6 TBFs, USFs = 3f, TFIs = 0000003f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7d, Fn=2654167 (17,25,9)
TBF(TFI=5 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=5 USF=5
cosmetic: Fix log output In BTS::rcv_rach() the log output is messed up because of a stray "\n". This commit removes that. Change-Id: I40d01c71982ad83589f070cf0047a4ae04695411
2017-01-26 10:39:16 +00:00
MS requests UL TBF on RACH, so we provide one: ra=0x7e Fn=2654167 qta=31 is_11bit=0:
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=0/0
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Creating MS object, TLLI = 0x00000000
Slot Allocation (Algorithm A) for class 0
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Assign uplink TS=7 TFI=6 USF=6
PDCH(TS 7, TRX 0): Attaching TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL), 7 TBFs, USFs = 7f, TFIs = 0000007f.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL) Setting Control TS 7
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 00
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Modifying MS object, TLLI = 0x00000000, TA 220 -> 7
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer T3169 [RACH (new UL-TBF)] with 0 sec. 0 microsec.
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=31 ra=0x7e, Fn=2654167 (17,25,9)
TBF(TFI=6 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH)
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
- TRX=0 (0) TS=7 TA=7 TSC=0 TFI=6 USF=6
+++++++++++++++++++++++++ RX : Uplink Control Block +++++++++++++++++++++++++
------------------------- RX : Uplink Control Block -------------------------
MS requests UL TBF in packet resource request of single block, so we provide one:
MS requests UL TBF in packet resource request of single block, but there is no resource request scheduled!
MS supports EGPRS multislot class 11.
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF starts here **********
Allocating UL TBF: MS_CLASS=11/11
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, TLLI = 0x00000000, MS class 0 -> 11
Modifying MS object, TLLI = 0x00000000, EGPRS MS class 0 -> 11
Slot Allocation (Algorithm A) for class 11
- Skipping TS 0, because not enabled
- Skipping TS 1, because not enabled
- Skipping TS 2, because not enabled
- Skipping TS 3, because not enabled
- Skipping TS 4, because not enabled
- Skipping TS 5, because not enabled
- Skipping TS 6, because not enabled
- Skipping TS 7, because no USF available
- Failed to allocate a TS, no USF available
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
No PDCH resource
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Creating MS object, TLLI = 0x00000000
Modifying MS object, UL TLLI: 0x00000000 -> 0xffeeddcc, not yet confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to ASSIGN
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Attaching TBF to MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS_REJ
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Received RTS for PDCH: TRX=0 TS=7 FN=2654218 block_nr=8 scheduling USF=0 for required uplink resource of UL TFI=0
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) starting timer T0 [reject (PACCH)] with 0 sec. 2000 microsec.
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) (TRX=0, TS=7)
Destroying MS object, TLLI = 0x00000000
Creating MS object, TLLI = 0x00000000
Modifying MS object, UL TLLI: 0x00000000 -> 0xffeeddcc, not yet confirmed
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to ASSIGN
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Attaching TBF to MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) changes UL ASS state from GPRS_RLCMAC_UL_ASS_NONE to GPRS_RLCMAC_UL_ASS_SEND_ASS_REJ
TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) starting timer T0 [reject (PACCH)] with 0 sec. 2000 microsec.
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Scheduling control message at RTS for TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) (TRX=0, TS=7)
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) timer 0 expired.
TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) releasing due to PACCH assignment timeout.
TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) free
TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN) stopping timer T0 [freeing TBF]
Handle packet access reject during packet resource request When Packet resource request is received, PCU will generate the packet access reject if no resources are present. The encoding is done based on section 7.1.3.2.1 and 8.1.2.5 of 44.060 version 7.27.0 Release 7. This patch also includes the test case to validate the generated packet access reject message. This patch is integration tested on Osmo-trx setup with Ettus B210 board and LG F70 MS with some simulation code changes in Osmo-pcu. Change-Id: I05ff25124b58905586caa0c0c37023d69724f121
2017-01-24 07:06:08 +00:00
Detaching TBF from MS object, TLLI = 0xffeeddcc, TBF = TBF(TFI=0 TLLI=0xffeeddcc DIR=UL STATE=ASSIGN)
Destroying MS object, TLLI = 0xffeeddcc
TBF: adjust test log levels * enable debugging for DTBF* * disable excessive DRLCMAC* Change-Id: I122620941e7939d513742c8589a75e0ab76f79ab
2018-01-24 10:04:59 +00:00
********** UL-TBF ends here **********