It's always set to OSMO_TERM_ERROR. Move the assignment to the caller.
In prepartion to use gmm_cause_to_fsm_and_mm_cause() in vlr_auth_fsm.
Change-Id: Ie4720ad40ef7bcfc528d8d63bfc606c9c0545fb2
We sometimes see errors like
libmsc/msc_a.c:361 msc_a(...){MSC_A_ST_RELEASING}: transition to state MSC_A_ST_RELEASING not permitted!
i.e. changing state to the state msc_a is already in.
Ignore re-entering the same state for most state changes. However, there is one
state change in msc_a where re-entering the MSC_A_ST_VALIDATE_L3 is necessary
to start the timeout.
Hence add msc_a_state_chg_always() and use that for re-entering
MSC_A_ST_VALIDATE_L3. Change msc_a_state_chg() to skip no-op state changes.
This should silence all no-op state change error messages for msc_a.
Related: OS#4169
Change-Id: I0c74c10b5fa7bbdd6ae3674926cc0393edf15a35
If an ID Response comes in during a non-LU L3 Complete (Paging or CM Service
Request), no event needs to be dispatched. So far vlr_subscr_rx_id_resp()
logged a NOTICE "gratuitous ID RESPONSE?!?" if no lu_fsm is present.
An ID Response can come in particularly as payload with a BSSMAP Cipher Mode
Complete message, even though osmo-msc didn't explicitly ask for it.
It is not an error to get a Cipher Mode Complete containing an ID Response
during Paging or CM Service Request, so remove the confusing log message.
Related: OS#4168 (only loosely related)
Change-Id: I8a5b8735eb41cd0976c7ab32cdd55440d3ef70ac
Add a network -> callwaiting VTY command as boolean.
When this is enabled (default) there is no change to
operation previous to this commit.
When this switch is disabled with "no call-waiting" in vty
then when a call arrives, we will check if we have an active
call transaction for this subscriber, no matter if it is
establishing, established, or alerting, in any of these cases we
will return USER BUSY to the calling party.
Change-Id: I3eb6f23f7103e3002874fb5d3a30c9de952202ae
Distinguish the enclosed DTAP RR Ciphering Mode Complete message from the outer
BSSMAP Cipher Mode Complete message in the DEBUG log.
Change-Id: I80c69b491e2ddb932bc4295a01caaf6a903b1fe4
So far we sent CC cause "Unassigned Number"
But the MSC doesn't trivially know whether the HLR has the number assigned or
not: any handset that is currently switched off would cause "Unassigned number"
to be displayed on the caller's handset.
Rather send a temporary failure cause code.
Send this cause code for all cases, because claiming that an assigned number is
unassigned is worse than rejecting an unassigned number with a temporary
failure.
Change-Id: Ia3d4f67b53fcc2654ff048fbc338e92cb763a095
Apparently, if a conn disappears during an ongoing call, the CC code tried to
send a CC REL on a NULL msc_a during cleanup, which lead to a crash
(cccamp2019). Guard against that.
Crash:
#0 msc_a_tx_dtap_to_i (msc_a=0x0, dtap=0x55a4bf2fa0f0) at ../../../../src/osmo-msc/src/libmsc/msc_a.c:1565
#1 0x000055a4be1bb03c in trans_tx_gsm48 (trans=0x55a4bf2d52a0, trans=0x55a4bf2d52a0, trans=0x55a4bf2d52a0, msg=<optimized out>)
at ../../../../src/osmo-msc/src/libmsc/gsm_04_08_cc.c:82
#2 gsm48_cc_tx_release (trans=trans@entry=0x55a4bf2d52a0, arg=arg@entry=0x7ffdd731a0e0) at ../../../../src/osmo-msc/src/libmsc/gsm_04_08_cc.c:1101
#3 0x000055a4be1bee65 in _gsm48_cc_trans_free (trans=trans@entry=0x55a4bf2d52a0) at ../../../../src/osmo-msc/src/libmsc/gsm_04_08_cc.c:278
#4 0x000055a4be1ab654 in trans_free (trans=trans@entry=0x55a4bf2d52a0) at ../../../../src/osmo-msc/src/libmsc/transaction.c:170
#5 0x000055a4be1bd091 in mncc_tx_to_gsm_cc (net=<optimized out>, msg=msg@entry=0x55a4bf2d3b68)
at ../../../../src/osmo-msc/src/libmsc/gsm_04_08_cc.c:1971
#6 0x000055a4be1bf1e5 in mncc_tx_to_cc (net=<optimized out>, arg=arg@entry=0x55a4bf2d3b68)
at ../../../../src/osmo-msc/src/libmsc/gsm_04_08_cc.c:2049
#7 0x000055a4be18ed63 in mncc_sock_read (bfd=0x55a4bf2563b8, bfd=0x55a4bf2563b8) at ../../../../src/osmo-msc/src/libmsc/mncc_sock.c:121
#8 mncc_sock_cb (bfd=0x55a4bf2563b8, flags=1) at ../../../../src/osmo-msc/src/libmsc/mncc_sock.c:189
#9 0x00007fcfad607ce1 in osmo_fd_disp_fds (_eset=0x7ffdd731a9a0, _wset=0x7ffdd731a920, _rset=0x7ffdd731a8a0)
at ../../../src/libosmocore/src/select.c:223
#10 osmo_select_main (polling=<optimized out>) at ../../../src/libosmocore/src/select.c:263
#11 0x000055a4be17dd56 in main (argc=3, argv=<optimized out>) at ../../../../src/osmo-msc/src/osmo-msc/msc_main.c:723
Change-Id: Ia1bb0410ad0618c182a5f6da06af342b6d483eff
All other calls check acl before deref because in a setup
with no access policy, there won't be any acl structure
Change-Id: Ibe0256535b40351594d79baa05a0147a9f89dc26
When a CSFB call is over the MS changes back to LTE after the call is
cleared. However, at the moment the MSC does not change the
cs.attached_via_ran flag. This may cause problems with the next call. Lets
make sure that if there is an SGs association present, the ran type is
set back to SGs when the call is cleared.
Related: SYS#4624
Change-Id: I104adecb0645b81b90ee230c57bf8b463c9e7045
When the VLR/MSC receives an SGsAP-MO-CSFB-INDICATION message it sets
the RAN type back to SGs. This is wrong, the message
SGsAP-MO-CSFB-INDICATION has just an informative character. It informs
the VLR that the UE has initiated an MO CSFB call (service request).
Change-Id: I625574fc42fc915ba483db3bb406922ad6df370d
Related: SYS#4624
Recently, the ability to run UTRAN without encryption was added, but the config
for it was tied to the A5 GERAN encryption configuration. This affected
osmo-msc's default behavior of Iu, breaking osmo-msc ttcn3 Iu tests: the ttcn3
test suite sets A5 to 0 (no encryption) but still expects Iu to enable air
encryption. Fix this "regression".
Add a separate vty config option for UEA encryption, even if it does not
provide full granularity to select individual UEA algorithms yet.
As a result, Iu default behavior remains to enable encryption regardless of the
A5 config. UTRAN encryption can be disabled by the new cfg option
"encryption uea 0" alone.
Even though the new vty command already allows passing various combinations of
the UEA algorithm numbers, only '0' and '1 2' are accepted as valid
combinations, to reflect current osmo-msc capabilities.
Revert most changes to the msc_vlr test suite in commit "do not force
encryption on UTRAN" (I04ecd7a3b1cc603b2e3feb630e8c7c93fc36ccd7): use new
net->iu_encryption instead of net->a5_encryption_mask.
Adjust/add to test_nodes.vty transcript tests.
Related: OS#4144
Change-Id: Ie138f2fcb105533f7bc06a6d2e6deccf6faccc5b
The function mncc_tx_to_gsm_cc() is declared as non static but only used
from within gsm_04_08_cc.c. Lets declare it as static to increase
readability of the code
Change-Id: Icd02c669cfee6dd7e6b154e303cd0f4c148c83c4
Event VLR_ULA_E_ID_IMEISV is listed as permitted in VLR_ULA_S_WAIT_LU_COMPL,
but is missing from the switch() on the incoming event. So, sending an IMEISV
identity during the WAIT_LU_COMPL state would crash osmo-msc.
When receiving an IMEISV, vlr_subscr_set_imeisv() in turn calls
vlr_subscr_set_imei(), so as far as the lu_fsm is concerned, receiving an
IMEISV is identical to receiving an IMEI, and it can continue to send a Check
IMEI request to the HLR. Thus simply add VLR_ULA_E_ID_IMEISV to the
VLR_ULA_E_ID_IMEI switch case.
Change-Id: I11106cb108a4b1406ff9a8b8ff5761440a274dad
Remove the conditions that always enable encryption on UTRAN.
We so far lack an explicit configuration for UTRAN encryption, and this patch
does not add any either. Instead, whether UTRAN encryption is enabled is simply
triggered on whether GERAN has A5 encryption enabled (A5/n with n > 0). Though
GERAN and UTRAN encryption are not technically related at all, this makes UTRAN
behave like GERAN for now, until we implement a proper separate configuration
for UTRAN encryption.
Adjust the msc_vlr_test_* configuration by setting the net->a5_encryption_mask
such that the expected output remains unchanged. A subsequent patch
(I54227f1f08c38c0bf69b9c48924669c4829b04b9) will add more tests, particularly
cases of UTRAN without encryption.
Adjust manual and vty doc.
Related: OS#2783
Change-Id: I04ecd7a3b1cc603b2e3feb630e8c7c93fc36ccd7
Since March 15th 2017, libosmocore API logging_vty_add_cmds() had its
parameter removed (c65c5b4ea075ef6cef11fff9442ae0b15c1d6af7). However,
definition in C file doesn't contain "(void)", which means number of
parameters is undefined and thus compiler doesn't complain. Let's remove
parameters from all callers before enforcing "(void)" on it.
Change-Id: Ia2b24ffd7f9cbb271fcdb979b851f3a07b9d6d3e
Related: OS#4138
GSM 04.08 10.5.4.11
The Release indication needs to have the Coding Standard set.
For phones that would display a message on screen, such as
"Number not in use", if the coding standard is not defined,
the display may show "Error in Connection"
Change-Id: Ib28b62a41d433e231cff5910d19455296b284df6
Don't call tx_lu_rej() in the "vlr_lu_compl" FSM. It is always getting
called in the parent "lu" FSM and is therefore redundant:
_vlr_lu_compl_fsm_done(fi, VLR_FSM_RESULT_FAILURE, cause)
-> osmo_fsm_inst_state_chg(fi, LU_COMPL_VLR_S_DONE, 0, 0)
-> vlr_lu_compl_fsm_dispatch_result()
-> lu_fsm_wait_lu_compl()/lu_fsm_wait_lu_compl_standalone()
-> lu_fsm_failure()
-> lfp->vlr->ops.tx_lu_rej()
I have noticed the bug with the TTCN3 tests. This patch fixes
TC_lu_imsi_auth_tmsi_check_imei_{nack,err} after stricter checking
in [1] and also TC_iu_mo_crcx_ran_reject.
[1] I836f76242463789c4c003feec757714827f2a31b (osmo-ttcn3-hacks)
Change-Id: I127b27937613ea0ff29d67991c0414fca6d441d9
osmo_counter will be soon deprecated. Use the newer and more flexible
osmo_stat_item instead.
Depends on: Id2462c4866bd22bc2338c9c8f69b775f88ae7511 (libosmocore)
Change-Id: I6a20123b263f4f808153794ee8a735092deb399e
The RANAP DirectTransfer message may contain an optional SAPI IE.
Thanks to our TTCN-3 tests (and Wireshark!), it was discovered
that this IE is ignored, so even if the MO SMS related messages
arrive on SAPI 3 (as per GSM TS 04.11, section 2.3) OsmoMSC sends
MT messages on SAPI 0.
In ran_iu_decode_l3() we need to check if the SAPI IE is present,
and tag the NAS PDU message buffer with a proper DLCI value.
This change makes the failing SMS related test cases pass.
Change-Id: I728b55b04e87fc23be6d4f8735e8cad82b6f640e
This change is similar to I6b68a0f0b32eb126e0f7e914a314130254d28467.
If we 100% sure that trans == NULL, it makes more sense to use
generic LOGP(DLSMS, LOGL_*, ...) call, so the logs can reflect
more information than such dummy prefix:
trans(NULL NULL callref-0x0 tid-0) ...
Change-Id: I3c1e633aee5dd7cd0d367404a3def9cffe0b3baa
This change is similar to I5540556b1c75f6873883e46b78656f31fc1ef186.
In gsm411_gsup_rx() we do call vlr_subscr_find_by_imsi(), which
increases subscriber's reference count by one using the function
name as the token. However, we never release this token, so the
reference count grows on every received GSUP FORWARD-SM message.
Change-Id: Ic729beb5f94cbbfbb251bc9ab66a5e7b799286c0
Otherwise when read in a log file it seems it's really going to send 20
sms even if there's none to send.
Change-Id: Ieb9bb61a90f295d2ba5fb67a2abee2d30785876d
When periodic Location Update is disabled (T3212 = 0), it was noticed
that OsmoMSC does expire subscribers quite soon - after 60 seconds
(VLR_SUBSCRIBER_LU_EXPIRATION_INTERVAL) since the last LU.
In order to avoid that, we need to check T3212 timer value in
vlr_subscr_expire_lu(), and if it's equal to 0, do not expire
anybody until the explicit IMSI Detach.
Change-Id: I2ead2241a3394dbdd5417f4554190df3fd698af2
If we 100% sure that trans == NULL, it makes more sense to use
generic LOGP(DSS, LOGL_*, ...) call, so the logs can reflect
more information than such dummy prefix:
trans(NULL NULL callref-0x0 tid-0) ...
Change-Id: I6b68a0f0b32eb126e0f7e914a314130254d28467
In gsm0911_gsup_rx() we do call vlr_subscr_find_by_imsi(), which
increases subscriber's reference count by one using the function
name as the token. However, we never release this token, so the
reference count grows on every received GSUP PROC-SS message.
Change-Id: I5540556b1c75f6873883e46b78656f31fc1ef186
This message can be used by the HLR/EUSE to indicate that something
went wrong, e.g. the connection with EUSE is lost, EUSE or the MS
did not respond in time, etc. OsmoMSC needs to release the SS/USSD
transaction, and send GSM 04.80 RELEASE COMPLETE message to the MS
if there is an active RAN connection.
Change-Id: I076d12ef24d7320eda1df1ee4588da7375ef3d9e
Related: (TTCN-3) I5586a88136c936441a842f49248824680603672e
Related: OS#2931
This check was copy-pasted from the CC handling code during the
initial development of "SS/USSD over GSUP" feature. It probably
makes sense for MT calls, but definitely not for SS/USSD.
Change-Id: I2899a23ee49fd7917443943629603700a5025cf4
This check was copy-pasted either from CC, or from SMS handling
code during the initial development of "SS/USSD over GSUP". Now
this is the only one survived after the recent refactoring.
I doubt this is exactly the right way to check whether subscriber
is attached or not. Moreover, this check should rather be done in
a single place, rather then in each CC/SS/SMS handler separately.
Change-Id: I7bd48860e923cb1f1a5bccc4b0f497ec1a7bcf84
In case of network-originated SS/USSD session establishment, we
need to verify the received GSUP PROC_SS_REQ message and make
sure that all mandatory IEs are present.
There is no sensible need to allocate a new transaction before
doing all the checks, other than the ability to use LOG_TRANS().
This complicates the code, so let's avoid the early allocation.
Change-Id: I4e027b19e8065a39324a1647957cef4066b82ce7
reported by _dev_zero in #osmocom
Change-Id: Ib5679ab5d06b6ef735725b4a68eeb1e9cbcc11ba
Depends-On: libosmocore I52b9f6b5f3e96d85a390ba2af21d7814df8aaeec
Alexander Couzens
Pau Espin
Keith Whyte
Philipp Maier
Oliver Smith
Eric Wild