Store the mapping from request to channel type in the GSM Network
struct as there is some policy involved with handling the request.
E.g. in a half rate network we don't want emergy calls to be getting
a TCH/F, or we want to have a different policy for early/late assignment
of phone calls. Update the table when creating the network and when
the neci is changed.
We are going to have more than one trunk, so all code hardcoding the
multiplex to zero must go. Avoid this kind of problem by saving the
MGCP endpoint number and comparing that.
common_vty.c was including bsc_nat.h which tried to
get the sccp/sccp_types.h which is not required to be
installed. Move all structs using/embedding SCCP structures
into the bsc_nat_sccp.h and include. This should fix
the compilation.
Add --enable-nat and --enable-osmo-bsc to build applications
requiring the Osmo SCCP library to be installed. We are not
using autodiscover as this is out of fashion.
Inside the access-list we have a list of entries that have
either one allow or one deny rule... we do not allow to remove
a single rule but one has to remove the whole list, in that case
talloc will handle cleaning all entries.
Right now the matching is O(n*m) as we traverse the list
(multiple times) and run the regexp multiple times. One
way to make it faster would be to concat all regexps into
one.
One can set one access-list to one BSC and one
access-list to one NAT. The matching of IMSIs
remains the same for now, also applying the
white/blacklist. Access lists can not be deleted
for now and no perf opt is done (e.g. one could
cache the result of the last lookup in the bsc
struct).
Right now it was not possible to just find a connection, by returning
the connection that is created we will have direct access to it. It
will be used by the local connection handling.
Now we are parsing a CM Service Request, Location Updating Request
and the Paging Response. For all other messages we claim to not
support it and force a refuse.
For now we have:
1.) bsc imsi deny to deny at the BSC level
2.) bsc imsi allow to allow a SIM at the BSC level
3.) nat imsi deny to deny at the global level
When setting a new MSC timeslot to a SCCP connection check if
any of the existing connections have this timeslot, if so we will
send a DLCX down the stream to make sure it is closed there, when
we will CRCX this new timeslot we will happily reallocate it.
When the SCCP connection goes away, or we get a DLCX from the
network, or the BSC is gone we will send a DLCX message down the
stream as well.
When we receive a CRCX from the network we will forward the CRCX
as usual and send a dummy MDCX after it.
For the DLCX and the dummy MDCX we send a custom MGCP message
that will not provoke an answer. Even if the downstream MGCP GW
will answer we will ignore it due the dummy transaction id that
is not used anywhere else.
This change should make sure that we close the dowstream endpoint
all the time, even when the DLCX arrives after the SCCP connection
is torndown.
When sending a MSG to the MSC try to find the to be used "src" reference
by comparing the reference on the BSC and the BSC connection. Only this
tuple needs to be unique.
Actually only when looking at the SRC REF we need to compare the BSC as the
dest reference should be unique but we are just making the check a bit stronger
to make it look symmetric.
We will reset the multiplex in a DLCX message and then
we can reset the multiplex as well...even if the MGCP
connection is staying open. or at least this is a theory.
The MSC likes to leave a connection open during CallControl
when hanging up early enough in the process.
Remove the code to parse port as we need to discover the
BTS behind the nat and most likely it will have a different
port than the one advertised by the BTS.
This reverts commit c6a1fe773d.
Fix the test to search for the original message instead
of the already patched one that should not find any items
anyway.
The remove is called on already patched connections so we
need to match it with the patch reference count.
Instead of checking the token for NULL we need to check if running
was set to null. Look at the data of the token and check if the line
was ending with a \r\n or \n and then when rewriting a line use that
line ending as well. Add a new test for that.
The MGCP protocol parsing is adding '\0' to make sure we do not
parse beyond where we should parse. This does not mix with strtok
or similiar routines.
For now we will read the msg into a global array first, then copy
it to the msgb for mgcp protocol handling and if we are required
to forward it to the MGCP we have a untouched copy we will modify
into our own msgb.
Attempt to find the message by transaction id, then patch
the response and use the IP/PORT of the local network, update
the ci with the one from the BSC.
This is currently not tracking any state of the MGCP and will
not handle two bsc's... this will need to happen later.
With this in we should be feature complete and now enter the
mode of making all of this work reliable and fixing thinko's
and other bugs.
Add code to change the ip and port for audio data inside
MGCP messages. This is needed because the BSS might be
behind the NAT and can not reach the network directly and
might be behind a nat so the announced sourceport is not
the one as we see it.
When losing the SCCP connection make sure that we free all
endpoints. The disconnection of the BSC should already make
sure they are closed but this makes sure everything is
properly reset.
* Return the SCCP connection. This will be needed to store the
assigned timeslot in there.
* Update code to work with this change
* This uncovered a bug in the CC handling, at the time the BSC was
passed it was still a null pointer and the code would have failed.
Moving it here means we can more easily test this code, there is one
behaviour change with the code that we only support paging messages
with one LAC and will silently ignore the others.
This test case tests connectiont tracking by sending
a CR, getting a CC, sending a DTAP, receiving a DTAP,
receiving a RLSD, sending a RLC. It verifies that the
messages are properly patched specially the references
at the BSC.
Introduce a bsc_nat_parse method to parse a IP Access method
into various parts. Write out the IPA Proto, in case SCCP is used,
store the msg type, pointers to the source/dest local reference and
other information.
Use the result of bsc_nat_parse inside the bsc_nat_filter method
to decide if the message should be dropped or not.
In the future the bsc_nat_parse result will be used for patching
SCCP references and other parts of the message.
The filter language should be able to filter the msg type of SCCP
messages and gain the "NOT" word in the filter language.
The logging/debugging code is generic enough to move it into libosmocore
while keeping OpenBSC specific definitions in openbsc itself.
This commit uses the logging support present in libosmocore-0.1.2,
you will have to update your library to this version.
Instead of deleting the msgb within the SCCP library the implementor
of the write callback needs to free it. This is required for non
blocking io with the server.
* use pkg-config from openbsc to find header and library
* move sms and timer tests to libosmocore itself
* ensure "make distcheck" works on both packages
This is the new logging architecture, including
* support for multiuple logging targets like stderr and vty
* log levels in addition to categories/subsystems
* filtering based on imsi, i.e. only see events for one subscriber
* dynamically change log level for each category for each vty
In file included from sms_test.c:27:
../../include/openbsc/gsm_utils.h:33: warning: `enum gsm_band' declared inside parameter list
../../include/openbsc/gsm_utils.h:33: warning: its scope is only this definition or declaration, which is probably not what you want
../../include/openbsc/gsm_utils.h:34: warning: `enum gsm_band' declared inside parameter list
Currently this will send a dummy inactivity test message,
there is currently no parsing or API to receive the messages.
The sequencing and credit entries are empty as sequencing
is currently not used at all.
The test is currently limited to send the message and see
if the application is crashing or not.
include/sccp/sccp_types.h contain Q.713 and GSM definitions
include/sccp/sccp.h is the application interface resembling
the esentials of the UNIX socket interface.
src/sccp.c is the actual implementation of SCCP featuring
connection and UDT1 support.
tests/sccp/sccp.c is testing connection creation and formating
of the SCCP messages used by the A-interface. And
it contains a simple fuzzing test to test the
robustnes of the implementation.
tmsi is four octets long, there is no need to make it a string
and then jump through hoops to convert it to a number. Keep the database
using it as a string to benefit from the NULL handling of the db.
Introduce the reserved tmsi which has all bits set to 1 according
to GSM 03.03 §2.4 and start checking for it and make sure the db
code will never allocate such a tmsi.
Prefix generate_mid_from_tmsi with a gsm48_, create a new method
to binary encode the imsi. Add a unit test for parsing and decoding.
The implementation can parse the data it generated and the
last octet seems to be filled with the end mark.
The existing gsm_04_08.c implementation is mixing BSC and MSC
behavior. Move some simple parsing and generation functions over
to gsm_04_08_utils.c to allow a different MSC to define the policy.
Currently we have circular dependencies from libbsc to libmsc
and this requires to play some linker tricks. The problem will
be solved in two ways, first we will get rid of the circular
dependencies and second we can start using --start-group and
--end-group of the linker to play the tricks for us.
For the BSC part we still assign a gsm_subscriber to lchan but it
might only contain the TMSI of this subscriber.
For the MSC part we will need the HLR/VLR feature of the gsm_subscriber,
specially the lookup's by number...
So if libbsc.a/libmsc.a are compiled in one app and used the
subscribers will be shared, and if only libbsc.a gets used we will
have more empty gsm_subscriber.c..
Attempt to split up bsc/msc functionality according to the specs. The
libbsc.a will be responsible for communicating with the BTS, configuring
it, paging, channel allocation and passing layer3 messages in both
ways. libmsc.a will implement the policy and such.
The test for the 7bit encoding and decoding remains in the code. The
test didn't compile and the code changed too much so the current test
didn't make any sense.
This is simulating a successfull request and is causing
a segfault. The test is done with a "mock object" in this
case a minimalistic paging implementation which is enough
to show the crash.
Compare that the callback data is supposed to be the same....
Holger Hans Peter Freyther
Harald Welte