Since we are keeping a bitvec of the neighbor cells, we can now use
bitvec_get_nth_set_bit() to determine the ARFCN for each reported
cell in the 04.08 MEASUREMENT REPORT.
In some cases, we can try to close the lchan a bit faster than our
lchan release timeout:
* After we've sent LOC UPD ACCEPT and MM INFO
* After a phone has confirmed the RELEASE of a call
With ip.access, in case of TCH/H, we have one RTP stream for each half-slot
(lchan), not just one per on-air timeslot. This is quite different from
a classic BTS where the TRAU frames of the two TCH/H channels would be
part of the same 16k sub-slot in a E1 timeslot.
This introduces the signals S_LCHAN_ACTIVATE_{ACK,NACK} and
S_LCAN_HANDOVER_{FAIL,COMPL,DETECT} as well as code that actually issues
those signals. The signals are relevant for a yet-to-be-written handover
control logic.
This patch extends struct gsm_meas_rep into a complete structure containing all
information from both uplink and downlink measurement results/reports.
This is a first step to provide this complete measurement data as a C structure
into a to-be-implemented handover decision algorithm.
Both GSM 04.08 RR and GSM 08.58 RSL need the multirate config
in the channel modify. Place the config in the lchan, change
the gsm48 methods to not take the argument, change the RSL
implementation to make use of it with the right IE.
The other code should use the t(l)v_put routines as well but
were left untouched for now.
IPA is naming these functions CRCX, MDCX, DLCX to follow
the naming of the MediaGatewayControlProtocol. Change the
code to go from BIND to CRCX (create connection) and from
CONNECT to MDCX (modify connection).
Connect indicates that it is only possible to call it once
while it is possible to call it more than once to modify
the audio parmaters and such. So the IPA terminology is
making a bit more sense here (now that we know it).
On channel mode modify and assignment command when using
the a multirate code the multirate configuration must be
present in the packet.
Add a parameter and add a warning when using it in a
broken way.
In the case a transaction has been already scheduled return 0 was
called but the subscriber and transaction would leak. Fix it by
calling subscr_put and trans_free.
After claiming the channel also remove the reference on the subscr.
Be able to send RR CHANNEL MODIFY from the BSC/MSC code
as well. Move the method that knows about the IPAccess RTP
and issues the "bind" to the utils tool
Add support for 1900 nanoBTS by using unified bts_type
GSM_BTS_TYPE_NANOBTS for 900, 1800 and 1900 versions.
Reduce the nanoBTS enum values to one and derive the
version from the user supplied band. In the future we
might want to do auto band detection.
The configuration file needs to be changed to refer
to nanobts instead of nanobts900/nanobts1800.
Signed-off-by: Mike Haben <michael.haben@btinternet.com>
Signed-off-by: Holger Hans Peter Freyther <zecke@selfish.org>
Add one method to extract the MI which will allow to load
the gsm_subscriber depending on the MSC/BSC setup and then
use gsm48_handle_paging_resp to finish the paging response
handling.
tmsi is four octets long, there is no need to make it a string
and then jump through hoops to convert it to a number. Keep the database
using it as a string to benefit from the NULL handling of the db.
Introduce the reserved tmsi which has all bits set to 1 according
to GSM 03.03 §2.4 and start checking for it and make sure the db
code will never allocate such a tmsi.
The algorithm ID used in the GSM 04.08 RR message is
(x-1) for A5/x. In RSL it's (x+1) for A5/x so there is
a difference of 2.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This just adds the 04.08 and RSL bits for A5, but not the logic
for performing authentication.
The caller would first set lchan->encr and then call
gsm48_send_rr_ciph_mode(lchan), which encapsulates the 04.08
CIPHERING MODE COMMAND into a RSL ENCRYPTION COMMAND and sends it
to the BTS for execution + forwarding.
Prefix generate_mid_from_tmsi with a gsm48_, create a new method
to binary encode the imsi. Add a unit test for parsing and decoding.
The implementation can parse the data it generated and the
last octet seems to be filled with the end mark.
The existing gsm_04_08.c implementation is mixing BSC and MSC
behavior. Move some simple parsing and generation functions over
to gsm_04_08_utils.c to allow a different MSC to define the policy.
the various constructors get called in a non-obvious, linker determined
order, which makes certain objects disappear from the talloc report.
This change moves the talloc context creation into a new talloc_ctx.c file
SMS related messages are all sent over SAPI=3. But in addition
to that, we also need to send it over the correct link identifier,
i.e. SACCH or main signalling channel
As it turns out, we start to allocate SDCCH for voice calls. Since we
don't yet implement switching from SDCCH to TCH during call setup,
this leads to various problems.
we now have the full path from the MS into the database (SUBMIT), as well as
back from the database to the MS (DELIVER). The database gets correctly
updated once a SMS has been successfully delivered.
What's still missing is the periodic scan over all undelivered messages,
trying to deliver them to the respective MS. So far, you have to manually
trigger this on the telnet interface with 'sms send pending 1'
* we only need one piece of code to calculate rsl_ie_chan_mode from
our run-time data structures (gsm_lchan)
* add some more channel modes for TCH/H and data
* use enum's to make the compiler warn us about unhandled enum values
* make sure the caller determines the (signalling,speech,data) mode
only after the LCHAN_MODIFY we know the final mode of the channel,
so we have to postpone our IPAC_BIND until then to make sure we set
the correct speech codec.
Up until now, we only supported direct RTP streams between ip.access BTS.
With this commit, the user can specify '-P' to the command line to enable
a RTP/RTCP proxy inside OpenBSC. The nanoBTS will then send all their voice
data to OpenBSC, which will relay it to the respective destination BTS (which
can be the same BTS).
The default behaviour remains unchanged. Without '-P' on the command line,
RTP/RTCP is exchanged directly.
There were many places in the code where we had to explicitly
reference the transaction_id and put it into a packet. By introducing
and optional gsm_trans parameter to gsm48_sendmsg(), we can implement
this code once rather than dozens of time.
since a subscriber is an element of the gsm_network, we have to ensure
subscr->net is always set correctly. We do this by using gsm_network
as an argument to all functions that resolve or create a subscriber.
Since a transaction is associated to a gsm_subscriber, and the subsciber
is part of a network, we don't need to have a dedicated transaction->network
pointer.
This changeset factors out gsm_transaction as something independent
of call control in preparation to re-use the code from SMS. A
transaction is uniquely identified by either its callref, or by
a tuple of (transaction_id, protocol, subscriber).
Since a transaction is associated to a gsm_subscriber, and the subsciber
is part of a network, we don't need to have a dedicated transaction->network
pointer.
This changeset factors out gsm_transaction as something independent
of call control in preparation to re-use the code from SMS. A
transaction is uniquely identified by either its callref, or by
a tuple of (transaction_id, protocol, subscriber).
since a subscriber is an element of the gsm_network, we have to ensure
subscr->net is always set correctly. We do this by using gsm_network
as an argument to all functions that resolve or create a subscriber.
For further evaluation/analysis, this patch stores the classmark 1, 2 and 3
values of every equipment in the SQL database. We can use this non-volatile
data to determine the supported features for each handset that we've ever
seen on our network.
* when paging callback is called, we need to consider a failed paging
operation (i.e. lchan == NULL)
* we have to zero-initialize every transaction that is allocated
after passing the mncc structure (contained in msgb) to the mncc layer,
we have to release its memory. This leak was discovered as a direct result of
using talloc.
Harald Welte
Harald Welte
Sylvain Munaut