gsm340_gen_oa() returns a negative value if the output buffer that the
caller passes is too small, so we have to check the return value of this
function.
Fixes: CID 174178
Fixes: CID 174179
Change-Id: I47215d7d89771730a7f84efa8aeeb187a0911fdb
This patch adds gsm340_sms_send_status_report_tpdu() to build a
status-report. Moreover, set sms->report field if we see a SMPP
SUBMIT_SM with Delivery Acknowledgment esm_class, so this identifies
that this is a delivery report.
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| | SUBMIT-SM |
| | esm_class = Delivery Ack |
| |<-------------------------------|
| | SUBMIT-SM-RESP |
| |------------------------------->|
| | |
| SMS-STATUS-REPORT | |
|<----------------------------| |
| GSM 04.11 RP-ACK | |
|---------------------------->| |
| | |
There is a FIXME message in this patch, that I just copied from
gsm340_gen_sms_deliver_tpdu() since TP-MMS is not supported by OpenBSC.
Change-Id: Ib70e534840308ed315f7add440351e649de3f907
Simple patch to test the new status-report support code, remove previous
code before Delivery Acknowledgement support was in place. Use
LOGL_DEBUG for logging messages here as suggested by Neels and Harald.
Change-Id: I877e228d8e174430f700631edbf9955972da7892
SMPP DELIVER_SM messages with esm_class = Delivery Receipt need to send
this message reference (that the mobile phone allocates) to the ESME.
Thus, the ESME propagates it via SUBMIT_SM with esm_class = Delivery
Acknoledgment so that the SMSC sends the GSM 03.40 status-report to the
origin including this. Given this field is useful for status-reports, we
need to store it in the HLR database.
Moreover, we need a new field that specifies if the entry represents a
SMS status-report, to do the right handling from the gsm411_send_sms() -
such new handling comes in a follow up patch entitled "libmsc: handle
delivery ack via SMPP SUBMIT SM / send GSM 03.40 status report".
This patch includes the migration routines to the new database schema
revision 5, it's quite a bit of dbi boilerplate code - copied-pasted and
adapted.
Change-Id: I7276d356d805a83ebeec72b02c8563b7135ea0b6
If the mobile phone requests a status report via SMS, send a DELIVER_SM
with esm_class = Delivery Receipt to ESME to indicate that the SMS has
been already delivered to its destination.
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| SMS-DELIVER | |
|<----------------------------| |
| GSM 04.11 RP-ACK | |
|---------------------------->| |
| | DELIVER-SM |
| | esm_class = Delivery Receipt |
| |------------------------------->|
| | DELIVER-SM-RESP |
| |<-------------------------------|
| | |
This patch implements "Appendix B. Delivery Receipt Format" as specified
in the SMPP 3.4 specs. This string is conveyed in the SMS message as
data, and it is only meaningful to the ESME, for logging purposes. The
"submit date" and "done date" are not yet set, and other fields are just
sent with dummy values, so they are left to be finished as future work.
The new SMPP TLV tag TLVID_user_message_reference is added to the SMPP
messages inconditionally now since this information is required by
delivery-reports to associate the status-report with the original SMS.
Change-Id: Ic1a9023074bfa938099377980b6aff9b262fab2a
Just munch and log SMPP delivery receipts by now, don't mirror this, it
is going to break things in openbsc.
Follow up patch removes this and mirrors this SMPP message as a
SUBMIT_SM with esm_class = Delivery Acknowledgement.
Change-Id: I78e93bc4034679e238c8642ccf6a0e844b1d6d8b
Propagate the status report request field to the SMPP message through
the registered_delivery field, so the ESME knows that the mobile phone
is asking for explicit delivery acknowledgment is required. See SMPP 3.4
specs section 5.2.17.
Change-Id: I59af60fa89cd10ae973c5e122789e3e03e3728ee
Rationale: allows seeing all timer defaults at once by doing
OsmoBSC(config-net)# timer ?
Before, defaults are visible only by doing on each timer:
OsmoBSC(config-net)# timer t1234 <tab>
Change-Id: I8259234e5c62e058dde56d531071440bbab11462
The VTY parsing already ensures the parameter range being 1..65535, no need to
check the range again.
Change-Id: I1cffa5b01cd5c589f1e42998e32135f1da8c960b
Move the sms message-type-identifier (mti) handling away from the
routing logic. This patch allows us to reuse the sms_route_mt_sms()
function in a follow up patch for sms reports send through SMPP
DELIVER_SM with esm_class = Delivery Receipt whose Change-Id is
Ic1a9023074bfa938099377980b6aff9b262fab2a.
Change-Id: I3f3d30e0762b91e2099243b0be1a4b67cbb5e9c0
No need to cache the sms object, just cache what we need into the
smpp_cmd structure. This simplifies what that I introduced in
93ffbd0029 ("libmsc: send RP-ACK to MS after ESME sends SMPP
DELIVER-SM-RESP").
Change-Id: Iba5f864f9bb963baff95969e306b1b7cff00c1e3
The following branch:
if (!rc && !gsms->receiver)
rc = GSM411_RP_CAUSE_MO_NUM_UNASSIGNED;
at the end of sms_route_mt_sms() always evaluates false.
Just a bit before, in such function, we have this:
if (!gsms->receiver) {
...
#ifdef BUILD_SMPP
...
#else
...
#endif
return rc;
}
So, if there is no receiver, we just stop running code and return the RP
cause via the rc variable. Same applies to the smpp_first check under
the BUILD_SMPP ifdef (that I have removed in this snippet to keep this
commit message small).
Change-Id: Ic3502b5b169bc7a73a67fd6ff53d8b6c0dc045c8
libgtp is calling gtpie_tv2 which will convert this uint16_t from host
to network order. So far libosmogsm and the sgsn treated the charging
characteristics as opaque data. So when moving from byte array to the
uint16_t do the swapping.
Change-Id: I977aec2e2f8d57802e45f591754e5733562d5c2a
We no longer permit timers with a 0 value, so this case can never
happen. Also, if it should happen, I'd rather have a timter expiring
immediately (and breaking something) than not being started in the
first place.
Change-Id: Ibfcdd3ddc0155caee89c501498329bde247621a0
It typically doesn't make sense to configure any of the GSM RR timer
to 0 (Seconds). In fact, accidentially configuring any of the timers
to zero might have severe side effects, such as "stuck channels"
described in https://osmocom.org/issues/2380
Change-Id: I517828f2f0c80ec01cb63648db2626f17a67fe57
A number of the GSM timers (including T3109) had no reasonable
default values if not specified in the VTY / config file. Together
with unconditional writing to the config file, this created
config files with a persistent setting for important timers as '0'.
To make things worse, many of our example cofig files suffered from the
same problem.
Let's avoid this from happening by
* having reasonable defaults if nothing specified in the config file
* conditionally savingg timers only if they differ from default
* reject any timer values that state zero during start-up (see previous
commit)
Change-Id: Iaac0bfca423852b61d8b9eb1438157ef00d0d8c8
Closes: OS#2380
Using this new command (introduced in OsmoBSC + OsmoNITB), you can
simulate the generation of TRAP events for testin purposes.
start the control interface monitor as an example client program:
./openbsc/contrib/bsc_control.py -m -d localhost -p 4249
then start OsmoBSC or OsmoNITB, telnet to the VTY and enter 'enable'
mode and issue the following (example) command:
ctrl-interface generate-trap my.foo.var 2342
As a result, on the bsc_control.py you will see:
Got message: TRAP 0 my.foo.var 2342
Change-Id: Ib1d2ec38290dc94797c1b365d9b733e5215ab7d1
In case the counter group allocation fails, we must handle this
gracefully and fail the allocation of the parent object, too.
The recent change (Id I7dad4a4d52fe05f6b990359841b4408df5990e21) seems
to have missed one instance, so let's follow-up.
Change-Id: I1ee9e3d26dcc18e7f979fd9a786162cbcc50942c
Related: OS#2361
If we previously had a given SI present/active, we must send a
zero-length BCCH FILLING for that SI type to the BTS to stop it from
further transmitting this SI.
Change-Id: I33e356e2fa3a69efac9080813e3e9ef4e6438ed1
Closes: OS#2368
If we want to instruct the BTS to stop sending a given SI, we must be
able to send the respective BCCH INFO / SACCH FILLING with a header but
without any L3 data IE. This patch enables the related functions to do
this whenever their data argument points to NULL.
Change-Id: I88b85614951a108574f05db3b706884afe7e87a9
In commit 8b1a2f8cd7 we started to
initialize bts->si_valid to 0. This means we are skipping the manually
configured static system information.
Instead, we have to initialize bts->si_valid to bts->si_mode_static,
i.e. start with those that are static and not to be auto-generated.
Found while developing
http://git.osmocom.org/osmo-ttcn3-hacks/tree/sysinfo
Change-Id: Iab9cc93cf6d54560a72cc393cc3721a8d10e04bf
Closes: #2367
In case the counter group allocation fails, we must handle this
gracefully and fail the allocation of the parent object, too.
RelateD: OS#2361
Change-Id: I7dad4a4d52fe05f6b990359841b4408df5990e21
This is useful if you are updating some configuration parameters which
affect the content of the SYSTEM INFORMATION messages. Currently, we
only send them at the time the RSL connection is established (i.e. when
the BTS is initialized), so if you change something, you need to bring
down and re-start the BTS.
Using the newly-introduced "bts <0-255> resend-system-information"
command, you can re-generate + re-send SYSTEM INFORMATION without
bringing the BTS down, i.e. without any radio carrier downtime.
Change-Id: I326df47de98f6d36c9a4d2d5475225d1e62bafb5
A valid subscriber is indespensible when allocating a new
transaction. Return NULL if no subscriber is supplied. This
will cause unidentified subscribers to be rejected.
Note: Under normal conditions, the problem does not occour,
but it is still possible that a misbehaving MS might trigger
the problem by sending a SETUP command before authenticating
the subscriber. (unencrypted networks)
Change-Id: Ia8739b6e329ab02c0064270d02ad1d6ee245520d
* fix BTS numbers: use 0 to indicate given BTS and 0xFF to indicate all
BTS' as it's explained in 3GPP TS 52.021 §9.3.
* only request attributes from supported (OsmoBTS) types
Change-Id: I8f43055c38000248033a8ff9ddaf0910d68d794b
Related: OS#2317
TS 04.14 (TS 44.014) specifies a series of commands specific to
conformance testing. Let's add some VTY commands to play (at least
initially) with closing and opening voice loops in the MS.
Change-Id: I38b1ee9dbf26f5689c38cb83b1b3c5e9eaad7678
For some GGSNs we need to insert the PDP Charging Characteristics
that were returned. We receive these values from GSUP and will
fill them into the tlv structure when finding the ggsn context.
Change-Id: I1725bfd2403d29ce3550bfcd6fcc1498426ef906
On incoming 04.08 messages, we log only the protocol discriminator in
decimal. Enhance: log pdisc and message type in hex, and also log the
protocol and message type as human readable string.
Also adjust the msc_vlr tests' log statements for wrapped rx/tx functions
of dtap from/to the MS.
Adjust the expected output of msc_vlr_tests.
Change-Id: Ida205d217e304337d816b14fd15e2ee435e7397d
Depends: libosmocore change-id I0fca8e95ed5c2148b1a7440eff3fc9c7583898df
The ip.access nano3G needs the first RTP payload's first two bytes to read hex
'e400', or it will reject the RAB assignment. Add flag
patched_first_rtp_payload to mgcp_rtp_state to detect the first RTP payload on
a stream, and overwrite its first bytes with e400. This should probably be
configurable, but seems to not harm other femto cells (as long as we patch only
the first RTP payload in each stream). Only do this when sending to the BTS
side.
Related: OS#2459
Change-Id: I5eff04dcb0936e21690e427ae5e49228cd459bd4
osmo-nitb becomes osmo-msc
add DIUCS debug log constant
add iucs.[hc]
add msc vty, remove nitb vty
add libiudummy, to avoid linking Iu deps in tests
Use new msc_tx_dtap() instead of gsm0808_submit_dtap()
libmgcp: add mgcpgw client API
bridge calls via mgcpgw
Enable MSC specific CTRL commands, bsc_base_ctrl_cmds_install() still needs to
be split up.
Change-Id: I5b5b6a9678b458affa86800afb1ec726e66eed88
In an upcoming commit, sgsn_vty_init() will require access to the global sgsn
config struct to initialize a generic VTY command with the proper config
destination address, see Change-Id I5b5b6a9678b458affa86800afb1ec726e66eed88.
Change-Id: Ie6b6e5422987586531a898e0c5b867623dbecb0f
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
libvlr now delegates subscriber management to osmo-hlr, so the database no
longer represents a HLR. It basically only stores SMS, so reflect that fact in
the default database name.
Change-Id: I3289d68d3eb63aff940b48a25b584d5e83cd0197
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
SMS:
The SQL based lookup of SMS for attached subscribers no longer works since the
SQL database no longer has the subscriber data. Replace with a round-robin on
the SMS recipient MSISDNs paired with a VLR subscriber RAM lookup whether the
subscriber is currently attached.
If there are many SMS for not-attached subscribers in the SMS database, this
will become inefficient: a DB hit returns a pending SMS, the RAM lookup will
reveal that the subscriber is not attached, after which the DB is hit for the
next SMS. It would become more efficient e.g. by having an MSISDN based hash
list for the VLR subscribers and by marking non-attached SMS recipients in the
SMS database so that they can be excluded with the SQL query already.
There is a sanity limit to do at most 100 db hits per attempt to find a pending
SMS. So if there are more than 100 stored SMS waiting for their recipients to
actually attach to the MSC, it may take more than one SMS queue trigger to
deliver SMS for subscribers that are actually attached.
This is not very beautiful, but is merely intended to carry us over to a time
when we have a proper separate SMSC entity.
Introduce gsm_subscriber_connection ref-counting in libmsc.
Remove/Disable VTY and CTRL commands to create subscribers, which is now a task
of the OsmoHLR. Adjust the python tests accordingly.
Remove VTY cmd subscriber-keep-in-ram.
Use OSMO_GSUP_PORT = 4222 instead of 2222. See
I4222e21686c823985be8ff1f16b1182be8ad6175.
So far use the LAC from conn->bts, will be replaced by conn->lac in
Id3705236350d5f69e447046b0a764bbabc3d493c.
Related: OS#1592 OS#1974
Change-Id: I639544a6cdda77a3aafc4e3446a55393f60e4050
Original libvlr code is by Harald Welte <laforge@gnumonks.org>,
polished and tweaked by Neels Hofmeyr <nhofmeyr@sysmocom.de>.
This is a long series of trial-and-error development collapsed in one patch.
This may be split in smaller commits if reviewers prefer that. If we can keep
it as one, we have saved ourselves the additional separation work.
Related: OS#1592
Change-Id: Ie303c98f8c18e40c87c1b68474b35de332033622
Before, each GSUP client would contact the HLR with an identical unit id, i.e.
"SGSN-00-00-00-00-00-00", with the result that some messages were sucked off by
the wrong client.
Pass explicit unit name from each gsup client user, so that OsmoMSC is "MSC"
and OsmoSGSN is "SGSN". Hence the HLR can properly route the messages.
Todo: also set some values instead of the zeros.
Unrelated cosmetic change while editing the arguments: gsup_client_create()'s
definition's oap client config arg name mismatched the one used in the
declaration. Use oapc_config in both.
Change-Id: I0a60681ab4a4d73e26fe8f0637447db4b6fe6eb2
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
during attachment, the "tmsi" field of the subscriber may be an empty
string, so the string must be quoted in the sql request, or the sql
request fails due to incorrect syntax.
also i added "extension" field to debug output.
Introduce the internal gsm0408_authorize that will determine
if we allow the user into our network. If allowed a new tmsi
will be allocated, the subscr_update will be called, the loc_operation
released, and the accept sent. Otherwise just return 0.
The code was copied from mm_rx_id_resp.
If location update is requested, but subscriber is not yet authorised
within mm_rx_loc_upd_req() function, the subscr_update() is not called,
because subscriber information is not complete.
During mm_rx_id_resp() the subscriber informations is may be complete,
so authorize subscriber succeeds and database must be updated.
this small tool is used to enable layer 1 and 2 on a given isdn card.
the card can be used to retrieve clock signal from a network. layer 2
(PTP) is required to keep layer 1 without interruption. this tool works
on e1 and s0 cards. to use the clock signal with other cards,
interconnection with a clock-slave-card is required.
(Andreas Eversberg)
Do not allow two location updating requests on the same lchan. Such
an event is certainly spoofed and can confuse the internal logic of
the application. Prevent that.
The abnormal case is that lchan_free ist getting called due
a RSL_MT_CHAN_REL_ACK in the RSL but the refcount of this
channel is not zero. This means that some "logical operation"
is still going on that needs to be cancelled.
Instead of always queuing up all operations in the
struct gsm_lchan use the signal framework to inform higher
layers about this abnormal case.
In gsm_04_08.c a signal handler is installed and in the
abnormal case the location updating request operation is
freed.
This was a stupid decision. We will have to assign the
network at some other place. The problem will be a problem
when we have two gsm_networks in one process and the same
subscriber is traveling in both networks.
The pointer was initially added to support to open a lchan
by using the gsm_subscriber structure. We would have restored
the struct gsm_bts from the db when loading the subscriber.
Instead we will dynamically resolve the gsm_bts and might end
up paging multiple bts in the same (stored/old) location area
until it answers.
It will define -DVTY_CRYPT_PW= if crypt is found. If -lcrypt is
needed, $(LIB_CRYPT) will be -lcrypt.
Compiles on OS X and Linux and reenables crypt.
Patch by: Lars Immisch
Tells mISDN not to release layer 2 on closing socket, when not
requested. If mISDN was told to release layer 2 once, it will continue
to release layer 2 on every shutdown of OpenBSC.
During bootstrap of BS11, the e1links are initialized. This must also be
done when BS11 is already bootstrapped (when restarting OpenBSC). It is
required to correctly multiplex the audio traffic between channels.
Without it, all time slots refer to card 0, slot 0, subslot 0, which
causes crashes when handling TRAU frames..
This patch will fix subscriber usage countinig.
It may happen, that the subscriber count will not be 0 after releasing
of a call. (This problem is solved with the application patch (27),
which will replace static call transaction by a dynamic transaction
list, and use subscriber for each transaction created.)
* add nm_state objects for RACK and CCLK
* add obj_class human-readable printing for all vendor obj_classes
* add human-readable printing of administrative state
* add enum for cell_alloc numbers
A new function trau_recv_lchan() is used to link a channel to a call reference
of a transaction. (Transactions are used in later patches.) TRAU frames will
then be forwarded to the application with the given call reference (in later
patches). Also the application can send TRAU frames by using trau_send_lchan().
A new list is introduced in trau_mux.c. (upqueue_entry) All subslots
that must be sent to application are listed here.
Received TRAU frames are written in the upqueue of application
interface, if a call reference is found in the upqueue-list. If an entry
is found the ss_entry list, the TRAU frames are bridged as before. The
frames have a message type (msg_type), a call reference (callref) and a
trau frame (data). The length of trau frame is defined by the content of
the c-bits inside the frame.
There is no support for ip.access yet, as they don't use the traditional
TRAU frame format. Harald must add this in order to use application interface
with ip-access. The bridging with ip-access works as before.
(Andreas Eversberg)
no IE type included in the message. These information elements are
mandatory, so their actual IE type is known. The improved parse_tlv()
function allows to parse zero, one, or two length-value elements.
(Andreas Eversberg)
is used for the E1's time slot. This timer replaces the "usleep()"
function, so the process will not block the execution of libbsc. The
timer is started after a frame is transmitted. If another frame is in
the transmit queue, the frame will only be queued until the timer times
out. If the timer is not running or times out, the frame is transmitted
and the timer is restarted.
The problem with partly provisioned TRX (locks show on LMT) is solved.
The adjustment for the inter frame delay of 50 miliseconds is for
further study.
(Andreas Eversberg)
select function ob libbsc. A "polling" flag is used to enable polling.
In this case select() will not sleep until file descriptor events occurr
or nearest timer expires. Also a return value will indicate if there was
an event that has been handled. If there was an event, the application
decides to poll again and don't wait.
In case for bsc_hack, the polling flag is not set. select will sleep as
usual.
(Andreas Eversberg)
The problem in the old logic was that we started talking to a given object
(e.g. radio carrier) one we received an administrative state change report. It
turns out we have to wait for the software activation report instead - and
everything suddenly works.
* keep track of site_id/bts_id in struct gsm_bts
* dynamically match incoming OML/RSL over TCP connections by BTS Unit ID
* introduce new debug category DINP (separate from DMI for hexdumps)
* remove ia_config() as it is no longer needed
*
* ensure that signalling links / E1 line information is correctly printed
* when bootstrapping RSL or OML, tell us for which BTS it is being doen
* separate bootstrap_bts() out from bootstrap_network()
* statically configure two ip.access BTS, one with unit id's 1800/0/0 and 1801/0/0
Patch by Andreas Eversberg to automatically release
layer2 on exit of the application. Made the naming of
the variables consistent (only release_l2 and not both
release_l2 and l2_release).
Let us establish the rule that there is one DB
per network. This will allow to assign a BTS of
the network to a subscriber that is loaded from
the db across restarts.
We directly assign the call->state and then check for something
that will never be true, and then immediately put the lchan and
schedule it's disconnect... and then directly after having closed
it down we send a message...
Change this to uncondtionally put down the lchan after having
changed the last(?) command.
Kill mi_set_pcap_fd from the header, introduce e1_set_pcap_fd
and call it from bsc_hack.c. Hook into abis_rsl_sendmsg and
_abis_nm_sendmsg for sending and e1inp_rx_ts for reading. It compiles
and should not cause a regression.
* gsm_util now uses caller-allocated data (rather than callee-allocated)
* correctly parse destination address
* parse (but not transcode) non-default encodings of SMS
* reject SMS to unknown destination number
* resolve target subscriber id and store incoming SMS (without header) in 'sms' table
What we're now missing is the sending part, i.e. a regular task iterating over
all pending SMS and trying to deliver them. Also, check for pending SMS once
we get a LOCATION UPDATE.
* initialize some data structures before using them in RSL
* DATA_REQ is a transparent message
* more elaborate DEBUGP statements here and there
* don't call 04.08 with zero-length RSL DATA INDICATION
* reject 04.08 CC HOLD and RETRIEVE, as we don't support them yet
- Fix the length (almost)
- Move the second part by 8 - b_off
e.g. with (ba) 0x62 0x61 the first bit of
0x61 goes to the highest on the first byte and
the second word contains 0x110000...
- The simple test case is almost passed... just a missing
character at the end.
- created for the creation of the SMS
- sent the time the message was submitted
- sender_id the subscriber for the return path/report
- receiver_id the subscriber
- header the (optional) SMS PDU header
- payload the payload (utf8), raw data
Apparently the BS-11 sends soem undocumented cause 0x18 as part of a CONN FAIL IND message
shortly after we establish the call. If we close the channel, the voice call
is aborted. If we ignore the message, everything just continues to work.
* add the concept of commands in addition to options
* add commands for querying essential configuration
* add command for explicit create/delete of TRX1
* software download is now an explicit operation
* correctly lchan_put the second lchan of a call at teardown
* map the RTP streams of ip.access onto each other
* fix bug that prevented a CONNECt message to ever reach the 'B' side
* initiate phone calls from one MS
* look-up the subscriber based on dialled extension
* page the called subscriber
* send the SETUP to the called subscriber, including CLIP/CLIR
* get ALERTING notification back to caller
* relay DISCONNECT from either side to the other
This is still far from being complete, but it at least works for the most common case
with the signals, but I think paging always has one reason and thus one caller wants to
get notified about completion, including a caller-specific context, etc)
* introduce TLV parser definitions for GSM 04.08
* parse and generate BCD number IE's for 04.08 call control
* introduce new notion of subsystem in addition to signal number
* no need for bitmasks of 'areas' (aka subsystems)
* pass subsystem/signal_nr/... per argument rather than by data structure
Pablo Neira Ayuso
Neels Hofmeyr
Harald Welte
Pau Espin