This commit is largely based on work by
Max <msuraev@sysmocom.de>
Adds LCLS parameters for A-interface transactions
This commit also adds a vty option to facilitate globally
disabling LCLS for all calls on this MSC.
Add a global call reference (GCR) to MNCC and therefore
bump the MNCC version to version 8. (This commit has to be
merged at the same time as the corresponing commit in the
osmo-sip-connector for mncc-external use.)
Depends: osmo-sip-connector Id40d7e0fed9356f801b3627c118150055e7232b1
Change-Id: I705c860e51637b4537cad65a330ecbaaca96dd5b
If the remote ESME would send us 0xffffffff as length field, don't try
to allocte 4GB of memory, but bail out.
Change-Id: I561f75210811826de06ea1673eca1df24faaa210
Fixes: CID#240738
During a recent pcap trace, it was spotted that subscriber coming from
SGs had a use count with 16 "SGs" items, and later it incremented to 17.
Further investigation shows that the related use_count item was never
decreased, meaning every time an SGs-LU was sent by the MME, the item
was incremented further and never decremented.
Let's rename the item to be referenced while in LU, and then decremented
when LU is done. At that time, either the LU was accepted and the
subscriber object has a use_count item "attached", or it was rejected
and we already sent the reject messages, so we are fine deleting it if
needed.
Related: SYS#5337
Change-Id: I22c386f02ffa57428f700b003cc2cf23133598d0
it was recently observed in a pcap trace with gsmtap_log that the
use_count contained a "vlr_sgs_imsi_detach" item despite no related
message was seen near by. Further investigation shows that there's an
unbalanced get+put code path, introduced by an early return added to fix
another issue.
related: SYS#5337
Fixes: 0803d88d9a
Change-Id: I91ae956e50fca2f4d0e1d145d60ccb0ebfb409e9
Will be used by I6fa37d6ca9fcb1637742b40e37b68d67664c9b60
"implement CM Re-Establish for voice calls"
Related: SYS#5130
Change-Id: I5291d098a02268bd1c2e30195ae61e4a13e8709c
As seen in a running osmo-msc:
"vlr_access_req_fsm.c:153
msc_a(IMSI-....:MSISDN-...:TMSI-0x...:GERAN-A-8:CM_SERVICE_REQ){MSC_A_ST_RELEASING}:
Event MSC_A_EV_CN_CLOSE not permitted"
Also seen in several unit tests, which need update.
The action event handler for that state is actually already
expecting/handling the event by ignoring it, so we should allow it.
Change-Id: I4d30cffab693529aab3ba736419dec116a4dd7ef
Forward the Kc128 key to the new BSS in BSSMAP Handover Request.
Depends: Ieb6e43eef9e57281d54d4b7c63664668df5aef3e (libosmocore)
Change-Id: Id5ce995a741c8e469a50a0c46e53c06a2378bb7e
Add A5/4 to the internal mask of allowed algorithms.
(Not actually working yet, A5/4 implementation follows in other
patches.)
Related: SYS#5324
Change-Id: I5b46aaa8579f8d069ca39caf996a8795ffe63dd7
Use new API in Cipher Mode Command to prepare for A5/4 support.
Depends: Ib3906085e0c6e5a496a9f755f0f786238a86ca34 (libosmocore)
Related: SYS#5324
Change-Id: Ib238d367b8d5d07b6ab4cb2e48fbf4ce22ca4476
Since recently, osmo-bsc behaves strictly as per specs, meaning it will
only send the "Cell selection indicator after release of all TCH and SDCCH IE"
in RR Channel Release iff:
* "Last Used E-UTRAN PLMN Id" was received in the CommonID sent MSC->BSC
* "Last Used E-UTRAN PLMN Id" was received insider "old BSS to new BSS Information"
in the HandoverRequest sent MSC->BSC.
On the other hand, CSFB_Indicator from ClearCommand MSC->BSC is nw
ignored and not taken into account.
Hence, let's update osmo-msc to also behave correctly by sending the
Last Used E-UTRAN PLMN ID at CommonID tx time to avoid regressions in
CSFB support when running against newer osmo-bsc.
Let's keep sending the CSFB Indicator in ClearCommand as we used too, in
order to keep compatibility with older BSCs (as per spec).
Related: SYS#5337
Change-Id: Ic5f175b179973d0a50d94f00e15f5a3e332605fc
Calling gsm48_cc_tx_release() before mncc_release_ind() has a side
effect: the former may change CC state to GSM_CSTATE_RELEASE_REQ.
This makes the later send MNCC_REL_CNF instead of MNCC_REL_IND, so
if one of the call leg disconnects due to RF failure, the other one
will not be terminated correctly.
Makes both TC_{mo,mt}_call_clear_request TTCN-3 test cases pass.
Change-Id: I3ad4a99757878de3796027325627c87d9a4e93f1
Related: Id16969fe0de04445d1320a96d35cf1d48cc8cf09
Related: SYS#5340
Previous code relied on abort() switching sigaction to SIG_FDL +
retriggering SIGABRT in case the signal handler returns, which would
then generate the coredump + terminate the process.
However, if a SIGABRT is received from somewhere else (kill -SIGABRT),
then the process would print the talloc report and continue running,
which is not desired.
Change-Id: Iff66eea9ee70850a4d038ece1d8473457023e1ee
Fixes: OS#4865
The function gsm48_rx_cm_reest_req() is the only one where the return
code of osmo_mobile_identity_decode_from_l3() is not checked, lets check
it here too.
Change-Id: I37981205870b094b3a40a20197461208daa62698
Fixes: CID#211037
We may never be able to deliver this SMS if it depends on the ESME, as we will
not resubmit the SMS to the ESME. Better to reject it at this time and have the MS
try again later.
Change-Id: I2c50904349dd4ed229b60b8468d776b817c0bd44
Related: OS#4740
The struct gsm_mncc which is created and populated in mncc_call_tx_setup_ind
casted to a union mncc_msg* pointer. This leads to a memory overrun
in mncc_call_tx because the union mncc_msg is larger then the gsm_mncc struct.
To fix this, lets just declare a union mncc_msg and populate the signal
member inside it. This can be handed over to mncc_call_tx. The data in
it will look the same, except that the memory will have the proper
lenght (longer).
Change-Id: Ifff28b3375d6bd5e4f837f25c46736952f7bfa9b
Fixes: CID 214330
Timer X1 is not defined in libosmo-mgcp-client, so this tdef had no effect.
Change this to X2427.
(libosmo-mgcp-client recently moved T2427001 to X2427.)
(X2 is still used in call_leg.c itself)
Related: OS#4539
Related: If097f52701fd81f29bcca1d252f4fb4fca8a04f7 (osmo-mgw)
Change-Id: I9804fdb2c24f49910f2386e3788bd1107b8ebc40
So far, the cmdline argument was the only way to set a database file.
Add a similar config to VTY as 'msc' / 'sms-database'. The cmdline arg is stronger
than the 'database' cfg item. DB is not reloaded from VTY command.
Change-Id: I18d954c30fcceb0b36a620b927fd3a93dcc79f49
"127.0.0.1" is changed to "localhost" to let local NSS decide whether to
use IPv4 or IPv6. In newish systems, IPv6 ::1 will be selected since
IPv6 takes precedence over IPv4.
Similarly, the default source addr needs to be changed from NULL to "localhost"
since for some yet unknwon reason, getaddrinfo(AF_UNSPEC, NULL) returns
first IPv4 "0.0.0.0" and later "::", which is inconsistent with
getaddrinfo("localhost") result, resulting in src=IPv4(0.0.0.0) and
dst=IPv6(::1), which is incompatible and will fail. In any case, since
the default remote address is a local one and it's the client side,
there's no real logical change since the kernel would anyway should have
taken a local address anyway.
Change-Id: I05a5c792ab1d053c6f38ba36d4b9fa6db293fbd0
We're already sending the RANAP CommonID message to the RNC,
let's do the same using BSSMAP CommonId towards the BSC. This
way the BSC knows about the IMSI of the served subscriber, which
is very useful for logging/debugging.
Change-Id: I2552736477663adb250c55728093500e8ae83ebb
Closes: OS#2969
Depends: libosmocore.git I353adc1aa72377f7d4b3336d2ff47791fb73d62c