The problem is that osmo_rat_type_name() calls get_value_string(),
so we first cast -1 to 'const enum osmo_rat_type' and then to
'uint32_t'. Let's rather use OSMO_RAT_UNKNOWN.
Found by GCC with -Wextra in CFLAGS:
warning: operand of ?: changes signedness from ‘int’ to
‘const enum osmo_rat_type’ due to unsignedness
of other operand [-Wsign-compare]
Change-Id: I63ba355102d3cc035ba90121e06aba7cf1776aa0
We unconditionally use logging level of the parent FSM anyway.
All callers of auth_fsm_start() always pass fi->log_level.
Change-Id: If2fdf2564eb56d3d94ec3800bdcb0aabcad4e48d
Since the split of OsmoNiTB, OsmoMSC does not deal with the radio
access network directly. Therefore the only purpose of T3212 is to
control subscriber expiration in the local VLR. The timeout value
indicated in System Information Type 3 needs to be configured
separately in the BSC/RNC.
This means that we don't need to store it in deci-hours anymore.
Let's move T3212 to the group of VLR specific timers, so it can
be configured and introspected using the generic 'timer' command,
and deprecate the old '[no] periodic location update' command.
It should be also noted that in the old code subscriber expiration
timeout was actually set to twice the T3212 value plus one minute.
After this change, we apply the configured value 'as-is', but
keep the old behaviour for 'periodic location update' command.
Change-Id: I9b12066599a7c834a53a93acf5902d91273bc74f
These timers so far were implemented as a list of unsigned integers,
which has never been initialized to any reasonable defaults. Since
they are used as state timeouts in several FSMs, we might end up
staying in some state forever.
Let's migrate to generic osmo_tdef API and use default values from
table 11.2 of 3GPP TS 24.008. This way the user can introspect and
change their values from the VTY / configuration file.
Change-Id: Ia8cf98da0aea0e626c5ff088a833d7359c43847f
Related: OS#4368
This change introduces several new VTY commands letting the user
a possibility to introspect and reconfigure some of the existing
timers implemented using libosmocore's osmo_tdef API.
At the moment this covers the following timers:
- MGW specific timers:
- X1 - MGCP response timeout,
- X2 - RTP stream establishing timeout,
- RAN specific timers (same names for GERAN and UTRAN):
- X1 - Authentication and Ciphering timeout,
- X2 - RAN connection release sanity timeout,
- X3 - Handover procedure timeout.
The following commands are introduced:
- 'enable' node:
- show timer [(mgw|mncc|sccp|geran|utran|sgs)] [TNNNN]
- 'config-msc' node:
- timer [(mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)]
Both MNCC and SCCP related timer definitions are empty at the
moment. Achieved by using osmo_tdef_group API of libosmovty.
Change-Id: I6024c104b6101666c8aa1108a043910eb75db9a5
Related: OS#4368
There was one libmsc commit to openbsc that was
thus far missing in osmo-msc.
This commit completes the work on delayed response
from an ESME. Without this patch, the SMR sends
an RP-ACK to the mobile station, and subsequently a
DELIVER_SM_REPONSE from the ESME provokes either a second
RP-ACK, or an RP-ERROR; both of which result in
"unhandled at this state (IDLE)" from the SMR
After this patch, we have two things corrected:
1) RP-ERROR respects Deliver-SM error cause.
2) No more "unhandled as this state" error from the SMR
Extract from original commit message:
--------
libmsc: annotate esme route in the sms object from deliver_to_esme()
Annotate this esme route, so we can use it to return -EINPROGRESS to
skip sending premature RP-ACK to the mobile station, in case we're
handling sms routes through SMPP.
--------
Fixes: #OS4351
Change-Id: Ic34d398e0a850856e20380ae35e5c2ae5e3c539b
This commit also, (for what it is worth) removes a
difference to the same file in openbsc, which I found
while looking for changes that affected SMPP delivery.
This is essentially a "forward-port" of [1]
[1] https://gerrit.osmocom.org/#/c/openbsc/+/3899/
Change-Id: I350c19f5bb70b2656171c096334c2ee83f49df7e
d34ed5768c introduced
comparison of GSM411_RP_CAUSE_MO_NUM_UNASSIGNED with
GSM48_CC_CAUSE_UNASSIGNED_NR
For consistency lets use the GSM411_RP constants
in SMS related code.
Change-Id: Ie54966560f66d2dcde905feb2eb19ef90406acd1
During the last congress, we have noticed that OsmoMSC crashes
on receipt of malformed MM Identity Response messages:
BSSAP
Message Type: Direct Transfer (0x01)
Data Link Connection Identifier
00.. .... = Control Channel: not further specified (0x0)
..00 0... = Spare: 0x0
.... .000 = SAPI: RR/MM/CC (0x0)
Length: 11
GSM A-I/F DTAP - Identity Response
Protocol Discriminator: Mobility Management messages (5)
.... 0101 = Protocol discriminator: Mobility Management messages (0x5)
0000 .... = Skip Indicator: No indication of selected PLMN (0)
01.. .... = Sequence number: 1
..01 1001 = DTAP Mobility Management Message Type: Identity Response (0x19)
Mobile Identity - Format Unknown
Length: 8
.... 1... = Odd/even indication: Odd number of identity digits
.... .111 = Mobile Identity Type: Unknown (7) <-- This makes OsmoMSC crash
[Expert Info (Warning/Protocol): Unknown format 7]
[Unknown format 7]
[Severity level: Warning]
[Group: Protocol]
The value '111'B is not a valid Mobile Identity type, and shall be
considered as reserved according to 3GPP TS 24.008, section 10.5.1.4.
Later on it was discovered that '000'B also crashes OsmoMSC in the same way.
The crash itself is provoked by OSMO_ASSERT(0) in vlr_subscr_rx_id_resp().
Let's keep that assert in there, and make sure that:
- on receipt of MM Identity Response, Mobile Identity type
matches the one in MM Identity Request;
- on receipt of RR Ciphering Mode Complete, Mobile Identity
contains IMEI(SV) if present.
Change-Id: Ica4c90b8eb4d90325313c6eb400fa4a6bc5df825
TTCN-3 test case: I62f23355eb91df2edf9dc837c928cb86b530b743
Fixes: OS#4340
We shall not include additional BCD length octet into the value part
of SM-RP-OA (Originating Address) IE. Instead, there should be
ToA/NPI header (1 octet).
Since we do not get ToN/NPI fields from the VLR/HLR, let's assume
the following default values:
1... .... = Extension: No extension
.001 .... = Type of number: International (1)
.... 0001 = Numbering plan: ISDN/telephone (E.164/E.163) (1)
Change-Id: I0f32e2af0ed2d2fea6addf45efbdfee120c2425d
TTCN-3 test case: Ib467eeca6439bc6cce72293fbb5bb48f6d233db9
Related: OS#4324
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I53ccde96dd3785098df0f7d693c504c8b8302e90
In order for osmo-hlr to be able to 100% guarantee distinct INDs for CS and PS,
set CN-Domain = CS in all SendAuthInfo Requests.
In Milenage auth, it is highly desirable that osmo-hlr guarantees use of
distinct INDs for CS and PS domains. If an MSC and SGSN attached at the same
time use the same IND bucket to generate Milenage SQN, that collision would
rapidly waste SQNs and load osmo-hlr with requesting new auth tuples on each
CS/PS Complete-Layer3.
So far, osmo-msc did not indicate the CN domain in the GSUP SendAuthInfo
Request, which was neither required nor evaluated. The CN-Domain is only sent
for the UpdateLocation Request that usually follows later.
Related: OS#4318
Change-Id: I22f44068268e62801cadbf6542efaf153423cd65
Please note that counter "sms:delivered" assumes "Delivered MT SMS",
but actually counts total number MT SMS delivery attempts. This
change describes its _actual_ (erroneous) behaviour.
Change-Id: I081cf962ce2658ceab02699f3cdee19658d00939
Related: OS#4273
Add a char buffer of 1024 characters length as space for SDP to pass to /
receive from MNCC.
Actually support receiving MNCC without such an SDP tail. The main reason for
this is to avoid the need to adjust the ttcn3 implementation of MNCC: it would
stop working for older osmo-msc.
Older or non-SIP MNCC peers could operate the previous MNCC protocol unchanged
(save the protocol number bump) without having to implement SDP.
The SDP part in the MNCC protocol will be used in upcoming patch
I8c3b2de53ffae4ec3a66b9dabf308c290a2c999f.
This patch must be merged at the same time as osmo-sip-connector patch
Iaca9ed6611fc5ca8ca749bbbefc31f54bea5e925, so that both sides have a matching
MNCC protocol version number.
Change-Id: Ie16f0804c4d99760cd4a0c544d0889b6313eebb7
Rationale: in order to add full SDP to the MNCC protocol (upcoming patch
I8c3b2de53ffae4ec3a66b9dabf308c290a2c999f), we need to parse and compose SDP
messages. Obviously, libosmo-mgcp-client already contains similar code, but
that is unfortunately heavily glued to the actual MGCP implementation. The
simplest solution is to create this separate implementation, copy-pasting from
the existing libosmo-mgcp-client code as is convenient.
This API is added here to probe whether it works well. When it does, the
intention is to "move it up" to osmo-mgw and overhaul the SDP parsing in our
MGCP client and MGCP server APIs using this same API.
Change-Id: If3ce23cd5bab15e2ab4c52ef3e4c75979dffe931
Do not free the CC transaction when an MT subscriber is already being Paged.
Instead, invoke another paging request, which paging.c will correctly add to
the list of pending paging response callbacks to run.
A ttcn3 test is linked in the related patch (s.b.).
Related: OS#4240
Related: Ieeae6322d4e80893ea3408c6b74bf8e32bea8e46
Change-Id: Idd4537b5f4817d17e5c87d9a93775a32aee0e7be
When the CRCX OK returns an invalid RTP address, abort the call; fixes
MSC_Tests.TC_invalid_mgcp_crash.
The original crash happened when adding this error handling without this commit
I08c03946605aa12e0a5ce8b3c773704ef5327a7a ("fsm: use deferred deallocation" for
osmo-mgw I7df2e9202b04e7ca7366bb0a8ec53cf3bb14faf3 "fix use-after-free: require
new fsm deferred dealloc, check for term"). With this error handling added,
even though avoiding a crash, the test does not pass yet, because instead of
rejecting the call, it currently composes an Assignment Command without a
Transport Layer Address. Fix that.
Change-Id: I00c3b5ff74c05bcc2b7c39375c33419916a57193