This is useful for affecting the 802.1Q PCP value without any separate
external packet filter rules for classification.
Change-Id: I69136c6dd114c24b1dace034e75dba5157bac37e
Depends: libosmocore.git I89abffcd125e6d073338a5c6437b9433220e1823
libosmocore If22988735fe05e51226c6b091a5348dcf1208cdf introduces
an even more convenient mechanism for specifying the DSCP of
an IP socket via OSMO_SOCK_F_DSCP()
Change-Id: If0b11dea08716ed3952a25b546b2a9bd013857bf
We have VTY options that allow to set the DSCP value. However, we
then call a function to set the TOS bits in the kernel. This is
very wrong. The DSCP is only the upper 6 bits of the 8-bit TOS
value, and hence we are mussing that translation.
As libosmocore now has a helper function osmo_sock_set_dscp(),
let's make use of it and don't care about the low-level details.
However, this means we need to finally remove the deprecated
alias for "rtp ip-tos <0-255>".
Closes: OS#5137
Change-Id: I9c18c90273be97aedd2ad212b82f650e35c32851
Depends: libosmocore.git Ia4ba389a5b7e3e9d5f17a742a900d6fd68c08e40
In I64ff22193ab2a95a9a7d66e9957a875d096e23de the soversion was
chhanged, but the spec.in file was not adjusted accordingly.
Change-Id: I45d7321adb2db8e7b9ea41b6bcf0c6cc59984a0e
In change I55605ea083565b6950d0820e3f72c50c9dc19ffa, the default
number of endpoints was increased to 512, however the
configuration examples were not updated.
Change-Id: I449a612065a5208c9f70ae74f594e8d45eb344cf
Related: OS#4711, SYS#5262
The manual does not say much about the endpoint naming, even though
osmo-mgw is oriented at RFC 3435 the endpoint names are specific to
osmo-mgw. In particular the E1/T1 endpoints and their overlapping need
some explaination
Change-Id: I16265eb667221959a69f33701d024bd8d9b22040
The cunfiguration chapter does not say anything about E1 trunk
configurations, lets add a subsection that explains how an E1
trunk is added.
Change-Id: I4059771df0f115242398d1af499c837005a7dabc
The E1 trunk lacks the VTY commands force-realloc and rtp-accept-all.
However, the function that write the E1 trunk config includes those
commands. Also they would be applicable, so lets add those two commands
also for E1 trunks.
Change-Id: Ief2bc7502bb8d1e0f9c784d42edbe1aed5ffb728
When a trunk 0 is created (which is legal) than it is impossible to
write this trunk back to the config. The reason for this that there is
still a filtering in place from the time where trunk 0 was not allowed.
This filter needs to be extended to filter only virtual trunk 0 but not
E1 trunk 0 out.
Change-Id: Iad6b577b5a711c35f98c477351fde567d8c87298
The trunk 0 was reserved for rtpbridge in earlier versions of osmo-mgw,
this was due to internal technical limitations which no longer exist.
Change-Id: Ic322f7dcf28db827187a4537e2634a887bd7b13b
Add a graph similar to "OsmoMGW used with OsmoMSC" that shows the
integration of a legacy E1 BTS into a AoIP network
Change-Id: I71dc2f4a188fbc25e81050be3dd4c83e1797e63d
The graph "OsmoMGW used with OsmoMSC" shows a BSC entity that accepts
AoIP and RTP, however osmo-bsc has no RTP proxy functionality. It makes
probably more sense to remove the BTS from the graph and call "BSC" "2G
BSS"
Change-Id: I6c7d26b6e45d0f953b82bca3ae7b2f26600982b2
The graph "OsmoMGW used with OsmoBSC" shows an RTP and 3GPP AoIP going
to OsmoMSC, this is technically wrong since osmoMSC has no RTP proxy
functionality whatsoever. Since the graph is not so much about OsmoMSC
it makes more sense to label OsmoMSC with "core-network", then it makes
sense and correctly highlights the role of osmo-mgw on the BSS side.
Change-Id: If3550a101e1e3cc2a25e21dcfe5474134015a6a7
The limitations section is outdated. We now have support for osmux and
E1 timeslots with trau frames. However, we did not mention that we still
have no transcoding as well.
Change-Id: Ia0fe8be96bbf880cfcd9d18256f4ac23a6efae79
To make clear which configuration changes (configure terminal)
apply when, add appropriate user attributes to VTY commands.
Change-Id: I2d9487801b3b78f94577264b56d217c926ef76a9
Related: SYS#4937, OS#1601
The initialization of the E1 line in mgcp_e1.c is controlled internally,
there is no need to expose the function mgcp_e1_init(), lets make it
static and remove the prefix mgcp_
Change-Id: I6aba1c55c9b1d729709ee1fba2994c77bd848a9b
The VTY command "bind early" is deprecated but it prints an error
message and the DEFUN is not set to DEFUN_DEPRECATED.
Change-Id: I594a87d2f63826a9d7b4f6a380586b08b3b79518
There exist trunk_loop commands, which sets an trunk->audio_loop
variable, however all it does is to turn on a log message. There is no
actual implementation present. Lets set the VTY commands to
DEFUN_DEPRECATED and remove the variable.
Change-Id: I72b0f8b908e32643e6e3db6ac024371b13c074a1
The error message: "abrupt FSM termination with connections still
present, sending unconditional DLCX..." implies a more serious problem
than in actually is. Even when connections are present on the
mgcp_client_fsm while it terminates, normal operation is still possible.
Lets change the loglevel to NOTICE and remove the "aprupt" from the
phrase.
Change-Id: I9749c024e208835bd4188bace13f723008de54c8
Related: SYS#5082
libosmo-mgcp-client looks up this timer in a caller provided osmo_tdef
definition. So far, all of our libosmo-mgcp-client callers do not configure
such a timer, so that we always use the default timer value.
We have introduced X timers (negative numbers) to indicate Osmocom specific
timers, and reserve T timers for 3GPP specified ones. So now is still a good
chance to move this timer to the Osmocom X realm.
Remove a comment about this timer at an unrelated place. It is still described
at osmo_mgcpc_ep_alloc().
Change-Id: If097f52701fd81f29bcca1d252f4fb4fca8a04f7
It is currently done upon receival of RTP packets in rx_rtp for pure RTP
conns, but nothing similar is done for Osmux conns, which eventually
trigger a connection time out.
Change-Id: Id592d7db7b9399a497176e0d28cc826b3bce48c0
Otherwise some state is kept, like the previous CallId, which may then
provoke issues next time the endpoint is to be used.
Change-Id: I3ac4f4542c1c8c877127c64acce6c82b458f697f
MDCX may provide a new remote address, which means we may need to update
our announced IP addr and re-bind our local end. This can happen for
instance if MGW initially provided an IPv4 during CRCX ACK, and now MDCX
tells us the remote has an IPv6 address.
Change-Id: Iaed424e2c209e1753e1f579752fc684aaad7a512
It doesn't make sense to call the function several times since anyway we
are only binding during
allocate_port()->mgcp_bind_net_rtp_port()->bind_rtp()->mgcp_create_bind()->osmo_sock_init2().
Let's better calculate the local IP addr once and use that stored value.
THis is a previous step towards next commit updating the local IP addr
and re-bindng if encessary.
Change-Id: I803b99c5e5fe0f92a5bf6796d8c25df88d1608e6
This commit allows for fully IPv6 systems to work fine. However, if a
remote endpoint still wants to use IPv4, it will fail since at this
point osmo-mgw still doesn't re-bind the local end of the connection to
an IPv4 after having initially bound it to an IPv6 one. This kind of
scenarios get fixed in next commits.
TODO: really bind the socket if a different IP address is requested.
Change-Id: I8ed94bd3f674f498e6ba315f44a351fff9c1be15
This commit contains the bulky work of moving all address parsing to
support IPv6 together with IPv4.
Some specific patches required for full IPv6+IPv4 support requiring
behavioral changes come after this one.
Full Osmux IPv6 support is left out of the scope of this patch.
Depends: libosmocore.git Ie07a38b05b7888885dba4ae795e9f3d9a561543d (> 1.4.0)
Depends: libosmocore.git I59bf4b4b3ed14766a5a5285923d1ffa9fc8b2294 (> 1.4.0)
Change-Id: I504ca776d88fd852bbaef07060c125980db3fdd7
This is needed in case MGW changes the local IP address (for instance
because it initlaly offered an IPv4 address, and a client submitted a
remote IPv6 address, so MGW needs then to offer a local IPv6 address for
the RTP connection to be possible).
Change-Id: Ie964412b81fe6e10914790baaea724ca5f772adc
Harald Welte
Pau Espin
Oliver Smith
Vadim Yanitskiy
Philipp Maier
Neels Hofmeyr