VTY cmd "logging level all" is deprecated in favour of "logging level
set-all", but the required behaviour in this case is "logging level
set-all".
Change-Id: Ice54fca6be86f05a02ce4ae783e6e42e6958b95d
Run osmo-trx in a separate more powerful machine (i5) rather than
running in low end APU where osmo-gsm-tester runs.
Change-Id: I0479643789783d5e8a142042a65c4d53020d1e79
Previous implementation was done due to osmo-pcu dying if failed to
connect to not-yet prepared BTS. This is no longer the case, so we can
start osmo-pcu as soon as the socket exists.
Change-Id: I3aa6bef0c4893bdcac668002ca018af019f666a3
First of all, it was found that vty allocation must be forced (-t -t)
during ssh session creation to make sure SIGHUP is forwarded when
session is closed.
Second, since osmo-trx ignores SIGHUP (osmo_init_ignore_signals()), we
must add a wrapper script which converts received SIGHUP into a SIGINT
to stop osmo-trx.
Change-Id: Ic334a54b1a1827d74fe0b453ac32bb77b8616147
Inroduce a way to not take a 2x performance hit when testing. It
is of importance if we run with hundreds of BTSes and 10k+ subscribers.
In the absence of using getops or shflags use an environment for it.
Change-Id: I540ba1c35e8fb72abcee0d86e0bdc1136b47345c
Instead of cloning osmocom-bb three times this will allow us to
re-use the repository. Simply change the directory, set the new
origin and fetch.
Change-Id: I63f103b2f70559e969e8c66477ab9ee7f2886832
It seems for not yet clear reasons the MS require some time after the
PDCH channels have been activated again to use them reliably. If no
sleep is used between call hangup and gprs activate pdp ctx, the MS
fails to activate the pdp ctx due to QMI error respone to the "Start
network" requested.
Related: OS#2582
Change-Id: I73b51c31309ac4c28c64ed7eb7c8c649e535aa22
We want to write repo name in there, not $dep which actually doesn't
exist in local context of have_repo function. In most cases it's
actually the same because in almost all cases $dep is passed as $1 to
have_repo and thus is the same as local $repo. But in a few recipes
which don't use build_repo directly but instead use have_repo and build
manually, $dep may not point to $repo. That's the case for osmocom-bb
for instance. As a result, "libosmocore" is printed twice, were second
word should be "osmocom-bb".
Change-Id: I7a7db7cf4cc020295d216c60d6dc688f110916dc
2nd TRX arfcn is changed in defaults.conf because multi_arfcn requires
them to be alocated in steps of 4 starting from TRX0.
It is not enabled by default yet on B200 (it must use it to support
several TRX) because current host running osmo-gsm-tester is not
performant enough and cannot keep up with timers due to multi-arfcn CPU
overhead.
Change-Id: I096df82ad1f4cbb41dfbd6a78466a845f34be385
To build osmo-nitb we need to clone "openbsc" and then enter the
"openbsc" sub-directory. For building "mobile" and "virt_phy" of
OsmocomBB we will need to do something similar. Instead of added
more hardcoded paths, add a variant that allows to specify the
source directory.
Change-Id: I67fbd54296f2c68316bf8e89cfeb37d147193d53
When first suites were added, osmo-nitb was used. Then new tests using
regular split components were added with "aoip_" prefix. At some point
it was clear that osmo-nitb was being deprecated so new tests for split
components were added without any prefix, as they are expected to be the
default one. Since most current and future development is going to be done
for split components, as well as new tests added, it makes sense to move
the few old testsuites using osmo-nitb to have all "nitb_" prefix, while
keeping the split component tests without prefix as it's the regular
network topology.
Change-Id: Idea2e053d337548e0e9b1b47441dbb262124f909
At all times have a list of mobiles that were created. Make a shallow
copy and use it as the unstarted list.
This will be used by the upcoming gsm tester integration to build a list
of subscribers to be added into the HLR/AuC database.
Change-Id: Id72b7ce8821cf53ac0d5e4a141b9a2b66242e2a3
In osmo-mgw.git 31b4729f2731c747b8b33c4646dd5ade2ace29bc, osmo-bsc_mgcp
was dropped and the one from openbsc.git must be used.
Change-Id: Ib1c46baf4d36ab18f8064a2234a0ba28a1e7d2c2
Otherwise since we install without root perissins to a local directory,
systemd files will fail to be installed to regular systemd location
/lib/systemd/system/).
Change-Id: I20a285e4e92fec7990770568e8d5dc117d6bf477
Take an IMSI/KI when creating the OsmoMobile and not when starting
it. This will allow other code to know which IMSIs will be used
before the system starts (e.g. to add it to the HLR/nitb db).
Change-Id: I79e259e948aa797c13118143ecd64bb7e29d274b
* This commit is a preparation for future commits to add support for
different osmo-trx devices and backends like osmo-trx-lms.
* Drop deprecated osmo-trx-* cmd line params and use VTY cfg to set them.
* As number of osmo-trx related osmo-gsm-tester attributes grow, group
them togther in an "osmo_trx" dictionary.
Change-Id: I77d29413c9e3b600b796627ba366f80c3281b7e1
Since latest release firmware, we have been unable to start up octobts
correctly. As it's annoying having all those tests failing all the time,
let's disable them in nightly builds until we have a working OctoBTS
setup working again.
Change-Id: I828723193564b3a91aeac0c163c7c8c6b7e4058c
suite.config() hasn't been activetly used anywere. New upcoming patches
will start using it to set and overlay config parameters for objects
which are not necessarily allocated as resources.
Since these options don't apply to specific resources, there's no sense
in running replicate_times() on them.
Change-Id: I5fcdc9151d1663e738f5c8abe588a42ab51c8f6e
From the commit that added it:
Using it requires the following extra dependencies:
$ apt-get install python3-usb
$ pip3 install pysispm
Change-Id: Id347604f47ac5243b7eae12b9bdf675f2379f4c6
Currently only 2 nanoBTS in the 900 band are attached together as a
multiTRX setup. We thus set num_trx to 2 and set channel allocator
descending to force the BTS to use the 2nd TRX when allocating channels.
Change-Id: I12e1bcb047c4efac5693cf725739e0ce2e0532ee
Now that we support modifiers in scenario files, we don't need to
duplicate tests and testsuites to dynamically set trx configuration at
run time. It can be done more easily with scenario modifiers.
Change-Id: I80c441bb5b98d5d2e95d4c6ae1efab3e5f3c40d9
Before this patch, scenarios were only used to select resources with
specific attributes. This commit introduces "modifiers" in scenarios,
which allows setting or modifing config attributes of resources once
they have been reserved. This way same test can be run selecting same
resources but modifying its configuration, allowing for instance running
different number of TRX, different timeslot configuration, etc.
Modifiers are described by placing a "modifiers" dictionary in any
scenario file, similar to the current "resources" one used to select
requird resources. The "modifiers" dictionary is overlaid on top of the
"resources" one resulting from combining all the "resources" dictionary
of all scenario files.
Change-Id: If8c422c67d9a971d9ce2c72594f55cde2db7550d
Since osmo-hlr.git I1d09fab810a6bb9ab02904de72dbc9e8a414f9f9, USSD
processing has been moved to osmo-hlr and prefix routing needs to be
configured, otherwise USSD requested are answered back to the MS with an
error "ss-NotAvailable (18)".
mesage received for extension resolution (*#100#) had its format change,
so update to new format (carriage return at the end was dropped).
Change-Id: I5f75eff0df2d20d7f9b39e69184cffb0e635713d
After bug described in OS#3456 and fixed in last commit, let's
categorize and place variables in its correct plac to avoid similar
issus. We leave under the class keyword (class scoped variables) the
attributes which are to be used as static class attributes. All other
ones are initialized during __init__(). This way w avoid scenarios in
which while using an object from an instance attribute we end up reading
a class scoped variable which is shared among all instances.
Change-Id: I5ad4cac34a9f49eaf42966c01c9c5a4d3f3e9dc8
variables under class section are shared among all instances, and are
used unless the specific class instance attribute is set. As a result,
the same pwsup_list object was being re-used.
Take the chance to do the same with the _pcu var, since we want same
behavior for it.
See for reference: https://stackoverflow.com/a/1716730
Fixes: OS#3456
Change-Id: I3f6a9d64b35aec33430e90872f41c3d046653ce6
num_trx is left for now by default to 1, but it has been tested to work
properly (current tests pass and both trx are configured) with
num_trx=2.
Change-Id: Ib3962f824a804e2aa582601475a8514c6cb0d8e7
We are already doing this for defaults.cfg, but not for resources.conf.
As a result, if we have a trx_list with 2 trx but we have set num_trx=1
(default), parsing will fail later in bsc.cfg.tmpl because
conf_for_bsc_prepare() will pass a trx_list with 2 trx.
Change-Id: I28ed34abeedaa0ee2e7862ced45a46042192d831
Pau Espin
Holger Hans Peter Freyther
Harald Welte