State machine inspired in the one from TS 24.008 4.1.3.3.1. Some state
transitions are inroduced in the code but are still commented out since
we lack some functionalitites or improvements in the code to handle
different scenarios.
Most of the logic is still outside of the FSM, but at least now the
states are handled in a sane way triggered by events.
Change-Id: Idecb43c10d66224d4f9ba9320825040ce6cf9a07
Implement TS 23.060 6.1.2 Mobility Management States (Iu mode) using
osmocom FSM and drop old implementation.
Most of the logic on each state is still kept in gprs_gmm.c, will be
inserted into the FSM later.
Change-Id: I4c9cf8c27194817c56e8949af0205e1cc14af317
Implement TS 23.060 6.1.1 Mobility Management States (A/Gb mode) using
osmocom FSM and drop old implementation.
Most of the logic on each state is still kept in gprs_gmm.c, will be
inserted into the FSM later.
Change-Id: I04004423e993107374d5a3549b8a93ac169251dd
Now that we have RANAP/Iu handling specificities in its own file, let's
have also Gb specific glue code for messages coming from llc up to MM/SM
layer in its own file. This way same entry points in gprs_gmm.c are used
by Gb and Iu: gsm0408_rcv_gmm() (for MM) and gsm0408_rcv_gsm() (for SM).
Change-Id: Iaf57922a0970c1d03f6f1d6337d27ae3d4aaf32c
RANAP related functionalities were splitted among several files
(gprs_gmm.c, gprs_sgsn.c and sgsn_libgtp.c). Let's move it into its own
file to shrink complexity/size of existing files.
It also allows to keep a lot of conditionally enabled code (BUILD_IU)
and its dependencies (osmo-iuh) together.
Change-Id: I549042aaff045a378de77d657cc396ee08f22f33
When a MS MM state is READY its exact location is known (PCU).
On Gb, T3314 (aka TS 23.060 "READY timer") sets the MM state from
READY to STANDBY, where only the RA is known.
Introduce a second set of timer variables, because state timer
can run while another packet state timer is timing out.
Related: OS#1941
Change-Id: I4ce23ebe50d141076c20c9c56990b7103cd25e55
Add a few commands to make sure it's working fine, and print all
available timers with default values.
Change-Id: Ifd092b9561d49be1f62769d95ba49f6e4aeb4066
Look at PDP Context Status IE: if there are any PDP contexts which are
ACTIVE on MS side and there are no PDP contexts which are ACTIVE on the
network side, then send Service Reject with the cause "NO PDP
ACTIVATED". This forces MS to reactivate the PDP contexts.
3GPP TS 24.008 Section 4.7.13.4 Service request procedure not accepted
by the network. Cause # 40.
Fixes: OS#3937
Change-Id: If610cbef17c25ec44e65d4f1b2340d102c560437
gprs_ns_rcvmsg() in old libosmocore returns "number of bytes transmitted
by any response PDU we sent as a result of the received message", while
modern libosmocore simply retunrs '0' for any successfully received
message. Let's make sure any non-negative responses lead to a
reproducible test output with both old and new libosmocore.
Change-Id: I7a48d14aed19825b87a02ccf9ee9cbfe0853342c
libosmocore commit 797558ea1768e464f9559c5f7a4f3f4285c5de25
changed the order of NS_UNBLOCK_ACK transmission dispatching
of the NS_UNBLOCK signal. Update expected output of gbproxy
tests accordingly to make these tests pass again.
Change-Id: Ia3df811755b1c88cf7a27a466677b24a6c32fd8e
Related: OS#2388
The two existing enums defined in gprs_sndcp_xid.h, for protocol
and data compression algorithm numbers respectively, were assigned
to 'int' variables when their values were copied to other structures.
This prevented the compiler from checking the enum value coverage
during switch statements and also tripped up Coverity scans looking
for enum value mismatch problems.
So instead of copying enums to ints, make use of the enums throughout.
Structures which can contain values from both enums now use a union
of both, forcing us to be very explicit about which set of values
we are dealing with.
Change-Id: I3771a5c59f4e6fee24083b3c914965baf192cbd7
Depends: If6f3598cd6da4643ff2214e21c0d21f6eff0eb67
Depends: I8444c1ed052707c76a979fb06cb018ac678defa7
Related: CID#149102
osmo-hlr has recently (as of Change-Id
Iad227bb477d64da30dd6bfbbe1bd0c0a55be9474) a working shared library
implementation of libosmo-gsup-client.
We can remove the local implementation in osmo-sgsn and use the
system-installed shared library instead.
Change-Id: I6f542945403cf2e3ddac419186b09ec0e2d43b69
The old GMM Attach Request handling used a recursive function
which can not handle certain states and is quite complex and hard to
extend.
The new FSM handles such request in a FSM and can be called multiple
times.
Change-Id: I58b9c17be9776a03bb2a5b21e99135cfefc8c912
The test cases now implemented by TTCN3 which should not be as fragile
as the unit tests. Because the unit tests expect a quite strong internal
state to be happen.
Change-Id: Iac1c8854b5ea4aa03279990390ebc110c979aac2
gprs_msgb_copy was introduced in libosmocore 0.94
(f78ec5ce0d0f6038147d9b9e14d81094309ba5d5) as bssgp_msgb_copy. Let's use
that one to avoid code duplication.
Change-Id: I42a65fd8e4045fafadf5694f2d8d0c5e7ab350a0
libosmogsm in libosmocore.git from Change-Id
Ie36729996abd30b84d1c30a09f62ebc6a9794950 onwards contains oap_client.c,
so we don't need our local copy here in this repo anymore.
Change-Id: I7b194f98ef3f925b6178d8a8dbd9fcf2f0c6e132
Requires: libosmocore.git Change-Id Ie36729996abd30b84d1c30a09f62ebc6a9794950
The message this test is trying to parse is indeed invalid.
Add a comment showing the message in decoded form, and assert
that the parser rejects it.
Also, add a missing call to cleanup_test().
Change-Id: I2a86432d080c38d3c95626372a0129499d7146dd
Related: OS#3178
Add a test which reproduces the parsing problem. Whether this problem
is due to an invalid message or a parser bug is yet to be determined.
Until then, this test helps with analyzing the problem further.
Change-Id: I39189701a57c785ffdacc3ae26d7aa93bb06cde6
Related: OS#3178
Store the established security context type (GSM or UMTS) instead of the
boolean flag is_authenticated. Provide the previous boolean query with thin
sgsn_mm_ctx_is_authenticated() function.
Knowing which security context was established will be necessary for OS#3224,
i.e. using the proper ciphering key, which is not yet tested properly, and
probably not correct at this stage.
This change will make new SGSN_Tests.TC_attach_umts_aka_gsm_sres pass.
Related: OS#3193 OS#3224
Change-Id: I36807bad3bc55c0030d4f09cb2c369714f24bec7
Particularly gbproxy_test.c had various mem leaks, which (will) show up with
gcc (Debian 7.3.0-15) 7.3.0 address sanitizer. Fix those leaks to verify that
we don't have memleaks in the production code.
Change-Id: Ia4204c8b3d895b42c103edecb61b99d3d22bd36f
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
Note that in gbproxy_test.ok, 0-0 changes to 000-000 instead of 000-00, because
the parsed ra buffer is 000000 which results in 000-000, while 00f000 would
result in 000-00. IOW this is expected.
Change-Id: I7437dfaa586689e2bef0d4be6537e5577a8f6c26
sgsn_test initializes various struct gprs_ra_id without naming the actual
members, which is vulnerable to struct member re-ordering. Name the members
explicitly.
An upcoming ABI change in libosmocore would cause test failures here without
this patch.
Change-Id: I517ed9edf77fac37d9de7a39df24c419a8a65d96
Both library are required to build osmo-sgsn.
The optional dependency was correct when osmo-sgsn
was part of openbsc.
Change-Id: Id608165ae490cb6c84aac1fe70412b2cb2b2587b
It has stricter type signature which increase the chance of spotting
misuse either via compiler warning or with automated scan. This also
paves the way for gsm48_construct_ra() deprecation in libosmocore.
Change-Id: I2c0f082dc7214ed57a40dad0788e34b838dfac97
Related: OS#1640
Fixes following compilation warnings:
osmo-sgsn/tests/sgsn/sgsn_test.c: In function ‘test_gmm_attach_subscr’:
osmo-sgsn/tests/sgsn/sgsn_test.c:1110:30: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types]
subscr_request_auth_info_cb = my_subscr_request_auth_info;
^
osmo-sgsn/tests/sgsn/sgsn_test.c: In function ‘test_gmm_attach_subscr_fake_auth’:
osmo-sgsn/tests/sgsn/sgsn_test.c:1144:30: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types]
subscr_request_auth_info_cb = my_subscr_request_auth_info_fake_auth;
^
osmo-sgsn/tests/sgsn/sgsn_test.c: In function ‘test_gmm_attach_subscr_gsup_auth’:
osmo-sgsn/tests/sgsn/sgsn_test.c:1275:30: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types]
subscr_request_auth_info_cb = my_subscr_request_auth_info_gsup_auth;
^
Change-Id: I5fcb3d460d8becb4cc917fc8d27bfc7e49d50b90
This avoids potential licensing incompatibility and makes integration of
Debian packaging patches easier.
The libosmocore version requirements are fine already but for jenkins
tests to pass we have to have Ic77866ce65acf524b768882c751a4f9c0635740b
merged into libosmocore master.
Related: OS#1694
Change-Id: I2b687b7f07ef05bbd861b8479cad5a958a3dde92
The ipa.py has been moved to osmo-python-tests as osmo_ipa - use it for
vty and ctrl tests instead of local copy. The soap.py and twisted_ipa.py
are not SGSN-specific: leftovers from repository split which are now
available in osmo-python-tests as well.
Change-Id: I3ef4ca790878921a5846f64942a8de8a6ff9c11c
According to documentation (and personal experience), AM_PATH_PYTHON
selects the highest version of python, no matter if major version is
different, which means if both python2 and 3 are available, 3 will be
chosen an PYTHON will point to "/.../python" which is python3. Apparently,
the macro cannot be easily used to pick highest python2 version.
As {vty,ctrl}_test_runner.py require python2 and are incompatible with
python3, let's instead rely on the system having a "python2" binary
available, which is the case in most distros.
Change-Id: If8e57924ed2c8da7ab7692f58a4bb5c5a970484f
It seems like recent changes expanded output of
dump_rate_ctr_group(). Adjust output accordingly to fix the build.
Change-Id: Icc9a53d35be2b0793d7ed25e6fec5bf6c8f84d92
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
To be able to run the msc_vlr tests for RAN_UTRAN_IU without Iu client headers
available, add iu_dummy.h, containing mere function signatures that match
iu_dummy.c and a mostly empty struct ranap_ue_conn_ctx.
Make sure we can build with and without --enable-iu: include osmo-iuh headers
only with --enable-iu.
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
Pau Espin
Alexander Couzens
Harald Welte
Neels Hofmeyr
Philipp Maier