The RSL "Channel rate and type" field from the RSL Channel Mode IE
in RSL_CHAN_ACTIV and RSL_MODE_MODIFY_REQ messages is the only place
where the BSC differentiates between a normal TCH and the special
TCH modes used in VGCS or VBS. Let's copy this field from the RSL
message into the lchan state, so that BTS models can actually (in
subsequent patches) reflect it when activating the L1.
Change-Id: I6d531bf528bcb81f44d91336471a46ef790d7646
Related: OS#4851
This adds very minimalistic support for notification of VBS/VGCS calls.
Minimalistic in that we
* only notify via PCH (not via NCH or FACCH)
* only include notification in otherwise empty PAGING TYPE 1
This means that notification will cease to work once the PCH becomes too
loaded and we never would send otherwise empty PAGING TYPE 1 anymore.
Change-Id: I6f6f72d9a0123cb519b341d72a124aaa2117370e
Requires: libosmocore.git I9586b5cb8514010d9358fcfc97c3d34741294522
Related: OS#5781
There was a surprising number of explicit gsm_lchan_name() calls
from within log message code. Let's avoid that whenever possible and
use a LOGPLCHAN() or related macro.
Change-Id: If4f4f555f5ca61dfa624b298805f5375efc0b137
These two messages indicate that no ACK/NACK message is going to be
sent to the BSC because activation/deactivation was requested by the
PCU. This is absolutely normal and requires no attention from the
user/operator, so better use LOGL_INFO.
Change-Id: I6eaf3a6c07fb30b31c045729c935c8ad6735e5c8
Parse the RTP CSD Format and reply with NACK if the mode is not
RSL_IPAC_RTP_CSD_TRAU_BTS, which is the only one we plan to implement
for now.
Related: OS#4393
Change-Id: Ibfc7811387df5224682d7e6a313d38648d3d8c48
The parameter l3_len in rsl_tx_meas_res() is defined as int, even though
it can't be negative. Lets use unsigned int for l3_len.
Change-Id: I99068a36e74a557000f406154dce32300615086c
The function is long/complex enough, so having one extra struct in_addr
declared the function top only used in one specific small path to print
the variable is unnecesary.
Let's move it to the conditional path where it is used to print the
ip address.
Change-Id: I4c16bbca6a6779537517b6b196828b47eddaa516
There's no need to maintain a duplicate msgb_queue_flush(), which
returns the amount of freed messages (feature not used at all by the
callers).
Change-Id: I9841e18ca0b7b852130bbb02a510e43a3b3fd93f
This configuration will be used as a fall-back when the MultiRate
configuration IE is not included in the CHAN ACT/MODIFY messages.
Change-Id: Ie96af636105ee1ffe2d9a0bd9eea375faebad149
Related: osmo-bsc.git Ic5f8d55d250976d8d4c9cae2d89480fd52326717
Related: SYS#5917, OS#4984
3GPP TS 48.058 defines the MultiRate configuration IE as optional,
and states that it's "included if the Channel Mode indicates that a
multi-rate codec is used". If I understand this correctly, it may
be omitted even if a multi-rate codec is requested. Otherwise it
would have been defined as a conditional IE.
For now let's print a warnig if this IE was expected, but missing.
We may need to apply some hard-coded defaults in this case.
If this IE is present, but the Channel Mode indicates a codec other
than AMR, let's send NACK with cause=RSL_ERR_OPT_IE_ERROR, assuming
that the CHAN ACT/MODIFY message is malformed.
Change-Id: I6ddc0b46a268ed56ac727cda57d0d68b2746fd59
Related: SYS#5917, OS#4984
According to 3GPP TS 48.058, section 4.1.4, BTS shall start transmission
on SACCH if both MS Power and *Timing Advance* IEs are present. There
can be no Access Delay IE in the RSL CHANnel ACTIVation message.
Change-Id: Icd8ccfd6e37ded8966125a473b5003845ba87fec
Fixes: I170b63c9856230d5f1a10654a9d950ada8e730d7
Related: SYS#5838
This avoid a NOTICE log line like the following when gsm_lchan_release()
is called.
"""
rsl.c:2484 (bts=0,trx=0,ts=2,ss=0) Sending RTP delete indication: cause = Normal event, unspecified
"""
Change-Id: I0ce78c52644983220f5810bc5c661b07afd9e543
It may happen after the A-bis connection recovery that the RF RESource
INDication message gets sent too early, while some timeslots are not
yet configured. This confuses the BSC and provokes error messages.
Change-Id: I00bc6fe67ea1bbedcd5d8640e73bd8b16b9e667f
Related: SYS#5313, SYS#4971
Currently an Uplink SACCH block is being passed to LAPDm first, and
then gets forwareded to the BSC in handle_ms_meas_report(), together
with the Uplink measurements collected so far.
This approach has a serious flaw: handle_ms_meas_report() won't be
called if an Uplink block contains SAPI=3 data (SMS) or was not
decoded at all (len=0) fow whatever reason. Therefore, no RSL
MEASurement RESult message will be sent to the BSC.
Rename handle_ms_meas_report() to lchan_meas_handle_sacch(), and call
it from l1sap_ph_data_ind(). This way perioduc RSL MEASurement RESult
messages will be sent regardless of what happens on Uplink SACCH.
Change-Id: Ifed91f87fd653debc87a09da3fd31ad64a13f330
Fixes: TC_meas_res_speech_{tchf,tchh}_sapi3
Related: SYS#5319
The new fields in 'struct abis_rsl_osmo_temp_ovp_acch_cap' allow:
* selectively enabling SACCH and/or FACCH,
* setting the RxQual (BER) threshold.
Both features are implemented in the follow-up commits.
Change-Id: I370c8f95fb64eceb60a9dc2eae1412f8a0df0f4e
Depends: Ia28293a12de0af71f55e701fb65c46e905dae217
Related: SYS#5319
During the merge of [1] the patch hunk was applied at a slightly
wrong location, so the code path has become unreacheable.
Change-Id: I823c9101bcca72d5792e16379b02d3602ffc2726
Fixes: [1] Ie4f70c75f0137b4bd72d579b3a32575bac2fca3
For the sake of consistency, call repeated_dl_facch_active_decision()
from handle_ms_meas_report(), so we have all functions using the
measurement results for Downlink executed in a single place.
Change-Id: Ibd5377ce642e49161f320ac8c33e9f966b3ddfaf
Related: SYS#5114, SYS#5319
Fixes crash when TTCN3 BTS_Tests_LAPDm TC_rr_response_frame_loss
runs run after TC_t200_n200.
The BTS was shutdown after TC_t200_n200 failed (drop oml link), and
lchan was moved ACTIVE->NONE without lapdm_channel_exit() being called
on it. Hence, on next test (TC_rr_response_frame_loss), when
lchan_init_lapdm() was called again, some memory corruption was caused.
The lapdm_channel_exit can be dropped from gsm_lchan_release() and
rsl_tx_rf_rel_ack() since it's already called in the same path:
"""
rsl_rx_rf_chan_rel
gsm_lchan_release(lchan, LCHAN_REL_ACT_RSL);
l1sap_chan_rel(lchan->ts->trx, gsm_lchan2chan_nr(lchan));
l1sap_chan_act_dact_modify(trx, chan_nr, PRIM_INFO_DEACTIVATE)
bts_model_l1sap_down
bts_model_lchan_deactivate_sacch(lchan);
-
lchan_deactivate(lchan);
bts_model_lchan_deactivate
lchan_set_state(lchan, LCHAN_S_NONE); <---------
mph_info_chan_confirm(trx, chan_nr, PRIM_INFO_DEACTIVATE, 0);
l1sap_info_rel_cnf
rsl_tx_rf_rel_ack(lchan);
lapdm_channel_exit(&lchan->lapdm_ch);
lapdm_channel_exit(&lchan->lapdm_ch);
"""
Related: SYS#5262
Change-Id: If0ec5f0c7be4d15c8d684d33e15e24d68bd5192e
The OML NM Channel FSM state only apply to primary timeslots, hence we
need to make sure we pick the primary TS (the non-shadow one).
Due to this bug, all channels on shadow TS where NACKed because the
related state was never "Enabled Ok".
Fixes: c97a7f51e1
Related: OS#5249
Related: OS#5251
Change-Id: If47e4bdd45a05ed1b5709b6e3d541f2830723e37
This information may be useful for the BSC to determine whether
dynamic PDCH timeslots might be better used for new circuit
switched connections, or whether alternative PDCH slots should
be allocated for interference reasons.
Change-Id: I5b4d1da0920e788ac8063cc765fe5b0223c76758
Related: SYS#5313
It's cleaner from the architectural point of view to have the
interference measurements processed in a separate function.
Change-Id: I3981608e01a50585359cad673c38c8a305027d30
Related: SYS#5313
It may happen that the BSC requests logical channel activation on a
dynamic timeslot, which is in a process of switching from one pchan
type to another due to a preceding channel activation request.
In this case 'struct gsm_bts_trx_ts' already holds an msgb with the
preceding RSL CHANnel ACTIVation message, that is normally handled
once the PHY completes the process of timeslot re-configuration.
On receipt of subsequent RSL CHANnel ACTIVation messages, in function
dyn_ts_l1_reconnect() we overwrite the preceeding msgb (memleak), by
the most recent one. And once the timeslot re-configuration is done,
only the most recent CHANnel ACTIVation message gets ACKed.
In order to avoid this, let's move the msgb ownership to 'struct
gsm_lchan', so it cannot be overwritten by the CHANnel ACTIVation
message that is related to a different lchan on the same timeslot.
Change-Id: Ia625c2827fca883ea712076706d5ef21ed793ba6
Related: I3b602ac9dbe0ab3e80eb30de573c9b48a79872d8
Fixes: OS#5245
Have a more stable loop with less temporary oscillations at the expense
of increased reaction time.
4 SACCH blocks (P_CON_INTERVAL=2) is the minimum interval to get stable
measurements for the last requested MS Power level. With P_CON_INTERVAL=1,
are also made during a period with stable power being use to transmit,
but the MS Power level used (and announced in MR) is not the last one
requested by the BTS, but the one requested in the previous loop
iteration. This can make the MS and BTS bounce 2 values forth and back,
and create some temporary oscillation.
See osmo-bsc User manual section "Power Control" for more information.
Related: SYS#5371
Change-Id: I91c505447f68714239a4f033d4f06e91893df201
A broken BSC could send a Chan Activation on a TS which has not yet been
enabled (or even configured). This is the case with our TTCN3 tests,
where OML side is currently handled in parallel by an osmo-bsc while
TTCN3 takes care of the RSL side. This can actually be seen as a
malfunctioning BSC, but it was spotted that given this sequence of
events osmo-bts can crash (see ticket below).
Hence, let's NACK any attempt from a BSC to activate an lchan on a
disabled TS.
Related: OS#5249
Change-Id: I9c3b68487c12efc412a057728a561e061560c544
The first check in this function ensures that the state is NONE.
Therefore it does not make sense to print it below..
Change-Id: I62ea4117dd5e1eebb8774809134e5cb73774945c
The temporary overpower value that is to be used with FACCH and SACCH is
transferred using a proprietary RSL IE (RSL_IE_OSMO_TOP_ACCH_CAP). The
parsed value is then stored in lchan->bs_acch_overpower_db so that it
can be used.
Change-Id: I426c2510865c4a986c68f2027cc676aaac0d8a4c
Related: SYS#5319
Harald Welte
Andreas Eversberg
Vadim Yanitskiy
Pau Espin
Oliver Smith
Philipp Maier