* explicitly set SAPI when sending data_ind to PCU
* drop unused receiving code for BCCH SAPI
* send SI13 when PCU is connected
* send SI13 when new SI is received
Change-Id: I9e83ef792585aa962f99897d9973cef12f186bcf
Related: OS#2400
Original OpenBTS transcievers add 2 bytes of padding to the end of data
bursts, having in total 158 bytes. As those two extra bytes are being
ignored after the initial validation, let's relax this validation a bit
in order to accept transcievers that decide no to send these two extra
bytes.
Change-Id: I94c3cb160bfed0ba9c41ed7ef5f8d8a65b81ad07
* move TA related globals into phy_link
* move power loop related globals into phy_link
* prefix corresponding vty vars with osmotrx
Change-Id: I01d7c1abad67e51b886a4ecf2de072929d67da27
Related: OS#1848
It was introduced in fe6c75d24a1751341bcee91cb45c7ac7f5d07da3:
* fix typo in config write
* add missing vty help string
Change-Id: Id42359dfbb8ad02f34dd2540db66f3ed69ad5181
Use Obj. Class and TRX# from abis_om_fom_hdr of incoming request instead
of BTS' MO to properly distinguish between BTS-level and TRX-level
attributes.
Change-Id: I8b5a5ab8bd07daf2500b66dec428b89b7f8cd852
Related: OS#2317
New libosmocore has some plugin system which requires dlopen(). So we need
to make sure we always link with libdl, even when building statically.
Note that this doesn't fix static build of tests - they are still failing
with some errors.
Change-Id: I8315d6e032e34528def268a49fd88d07bc06ab2e
When somebody kills the process, it's best to handle the signal
and to use the opportunity for some cleanup. We always did this
in the BTS on SIGINT, but never on SIGTERM. Let's change it.
Change-Id: I10009c08b7178988f646e2b6035197b9640ac9b5
We tend to start MS with high power to make sure distant phones get good QoS,
but this also means that we need to reduce their power rather quickly. OTOH
we can't make this step too high because this may lead to power output
oscillation. From my (manual, limited) testing 4dB looks like a reasonable
compromise.
Change-Id: I58785513e5739474b881ed7f2a312ecc690e7e60
The following two commits from 2014-12-06 introduced a new variable to control
MS power - ms_power_ctrl, but kept the old ms_power variable in place. They
have also changed the meaning of the ms_power variable - it now keeps original
RSL configured value. So when much later osmo-trx-bts code was merged to master
the code was compiling fine and this change in the meaning was overlooked.
In osmo-bts:
579651bf30 power/sysmobts: Add a manual ms power level control
In OpenBSC:
f6f86b0eec18da165db136b14bf2db87fde4b4ac osmo-bts: Introduce new struct for a power loop in the BTS code
Change-Id: I713e39b882db32a0d17aa04790d16fa79afa1fb1
* move duplicated code into separate functions in jenkins_common.sh
* use that function in individual builds
Change-Id: I4d09c5f2693b5ac0a4d8f2c840971e13d1ec58cf
Implement API functions bts_model_ts_connect() and
bts_model_ts_disconnect() in order to support dynamic timeslot
allocation.
Change-Id: Ia109d4bfade7bc28442127581f4bb0289146ea71
There are currently two ways to specify power reductions to be sent to
osmo-trx from osmo-bts-trx:
* osmotrx tx-attenuation oml
* osmotrx tx-attenuation <0-50>
None of them is enabled by default, which means if none of them is
specified in the config file of osmo-bts-trx, SETPOWER cmd won't be sent
to osmo-trx, which in turn won't turn on the transciever.
Let's enable osmo tx-attenuation oml by default and leave it up to the
bsc to decide which power reduction to use. If the user wants to
configure a specific tx-attentuation, it can still do so in exactly the
same way he used to do it.
Change-Id: Ia8640751630ee37e5f5d1f470bad892a08e80654
In openbsc.git Change-Id I61c18a7f021fcb1ec00d34a745f4e3ab03416c2d
we changed the gsm_bts_alloc() function signature to include
a second argument (the BTS number). This broke omso-bts, and this
commit is intended to make it build again.
Change-Id: I7ef7654d48c1cfc7e4ecb0b771553ec0740ce2bf
Whether or not we are talking to an OpenBTS (SETBSIC) or OsmoTRX
(SETTSC) transceiver is a property of the phy_link, and not a property
of the BTS. Also, we *really, really* should never use global
variables. I'm very happy this is being cleaned up, finally.
Change-Id: I51aeb17661dfd63ff347f7b2c0d7ffa383ec814c
Those global variable declarations for non-existing variables were
introduced in 8a8d73a691, let's remove
them again. The source / destination IP address is a parameter of the
phy_link, and not a global variable.
Related: OS#1848
Change-Id: I94b5f934fc3bd00b0467d90029d3053b16594186
There's very little point in sending fill frames (such as empty PAGING)
or dummy UI frames via GSMTAP all the time. They serve no purpose other
than to bloat the log files and make it more difficult for users to find
the interesting bits among all this noise.
Change-Id: Icd18dafb235933c9e6aa9d98ddd8fac1522cc9ac
So far, L1SAP code is hiding RSL_CHAN_OSMO_PDCH from the bts specific
code below L1SAP. This is some kind of a hack/workaround, making code
and debug output / logs more difficult to understand.
So let's teach the lower layer how to treat RSL_CHAN_OSMO_PDCH and
remove the "hiding" code from the common l1sap.c code.
Change-Id: Iaaa833febe45b82166d3901f10cc5466a7591c19
service sets led to orange before/while osmo-bts is being started.
osmo-bts-lc15 sets led to green while operating. (unchanged in here)
service sets led to red when osmo-bts stops running.
Change-Id: If351f49d1ead359192d0d80bbc381afd3459c940
The RSL Channel ID is best read / interpreted as hex value, not as
decimal, primarily due to the fact that it is a bit-mask of various
fields.
Change-Id: I9b72a67407870b485e7f7e8a72fa1ad30fc8ed4d
In bts_model_l1sap_down() we want to identify BCCH/CCCH channel numbers,
but our check is a bit non-specific. Let's make the check more specific
to only cover the BCCH, Uplink CCCH and Downlink CCCH C-bits as defined
n 3GPP TS 08.58 Section 9.3.1
Change-Id: Ia20ab09b96c87c0dfbfaf98e5b2a8d36423fac67
There are plenty of functions stubbed out in osmo-bts-virtual, let's
print a NOTICE level log message to be able to correlate any kind of
erroneous behavior with the fact that a given function has no actual
implementation.
Change-Id: Ib607d192f90af7fb2d5a8747de5527f39e3cfefa
That's mostly changes related to lc15bts-mgr from
https://gitlab.com/nrw_noa/osmo-bts branch nrw/litecell15 based on
eb5b7f80510b603579f7af6d7d5ead296c2fa260 commit:
* adjust comments to simplify further diffs
* add libsystemd dependency to lc15bts-mgr
* add software watchdog which uses it
* ocxo calibration and gps related code
Change-Id: I475a330af771891ba3c897294ce0dd57ec2ba8db
Related: SYS#3732
The sysmobts- and lc15bts- mgr have different semantics for the same
command line option (-n: writing to EEPROM vs writing to ROM). and
different default value. Hence it make sense to use separate files,
similar to osmo-bts-*.service
Change-Id: I645a81e30d7146ff26720391db763b6d585037e6
Related: SYS#3728
In a larger simulated network with multiple BTSs it is normal that one
BTS will see GSMTAP frames for an ARFCN that is not an ARFCN used by the
local BTS. This is just normal operation.
Change-Id: Ic68cace9648ccb17500c94b6ede8814674aa9c29
That's mostly changes related to lc15bts-mgr from
https://gitlab.com/nrw_noa/osmo-bts branch nrw/litecell15 based on
eb5b7f80510b603579f7af6d7d5ead296c2fa260 commit.
I wanted to incorporate vty and hardcoded paths changes so we can use it
from this point without major backward-incompatible changes as a base
for future ports.
Change-Id: Iabbaedc84aaaa594150a4e5445c16dd1f6f89858
Related: SYS#3679
* move common code into separate function
* print error similar to parameter reading code
Change-Id: Icf3285d7bb921d212cb8945e835be2c81189fb87
Related: SYS#3728
Recent introduction of VIRT-PHY broke .deb build. Fix it by installing
osmo-bts-virtual as part of Debian package.
Change-Id: I1ca7eb51019247eb95c6bac752d6e2c4406ce5a2
When no SI 2bis, nor 2ter, nor 2quater is in use, then the code in
bts_sysinfo_get() will return null, causing the transmission of a dummy
frame (0303012B2B2B2B2B2B2B2B2B2B2B2B2B2B2B2B2B2B2B2B) instead of a
system information message. This is - at least - very odd and might not
be backed by the specification. We should simply send any other system
information message instead of sending a frame that does not have a
valid SI header.
While 030301 might be a valid, empty UI frame on a DCCH, it is not a
valid frame for the BCCH, where the header is structured differently.
In fact, bts_sysinfo_get() should never return NULL and always return a
valid BCCH message.
This bug was found while developing
http://git.osmocom.org/osmo-ttcn3-hacks/tree/sysinfo/Test.ttcn
Change-Id: Ifeaed27d1d7ba9994fb8ce67d660648bcc8efece
Closes: OS#2365