This is used only in integration testing, where in the TTCN-3 testsuite
we currently have no A-bis OML implementation, but only a RSL one.
Change-Id: Id8e5f34091e6e32621d8c8673de7ea848dfd252f
gsm_bts_role_bts was introduced at a time when we still shared
gsm_data_shared.[ch] between BSC and BTS, and where we then subsequently
needed a BTS-private structure. Since that sharing was abandoned quite
some time ago, we can merge gsm_bts_role_bts into gsm_bts and do away
with the bts/btsb dualism in a lot of the code.
Change-Id: I4fdd601ea873d9697f89a748cc77bcf7c978fa3e
Rathert han have 11 direct members of gsm_bts_role_bts, group them
into a sub-struct as ew do for other parts like interference, laod, ...
Change-Id: Iefecf4b70c1b11c650913f2ae3783718ffb8a36c
What we remove here is a legacy from sharing this header file with
openbsc/osmo-bsc-sccplite, which we stopped to do quite some time ago
and hence can remove those parts that are only relevant to the BSC but
not to the BTS.
Change-Id: Icac1656da68f6a006a28c779e3b563bbdd905b3d
In order to be able to introspect not only the root application
context, but also all other contexts, e.g. allocated within
libosmocore or other libraries, let's enable tracking the
use of NULL contexts using the corresponding talloc API.
In order to obserbe all existing contexts,
use the following VTY command:
OsmoBTS# show talloc-context all ...
Example of usage:
OsmoBTS# show talloc-context all brief
talloc report on 'null_context' (total 1302808 bytes in 5185 blocks)
lapd context contains 129 bytes in 5 blocks
struct signal_handler contains 40 bytes in 1 blocks
struct pcu_sock_state contains 120 bytes in 1 blocks
struct lookup_helper contains 24 bytes in 1 blocks
struct signal_handler contains 40 bytes in 1 blocks
struct signal_handler contains 40 bytes in 1 blocks
abis contains 49065 bytes in 19 blocks
struct signal_handler contains 40 bytes in 1 blocks
struct signal_handler contains 40 bytes in 1 blocks
struct signal_handler contains 40 bytes in 1 blocks
vty contains 93690 bytes in 5008 blocks
logging contains 2862 bytes in 7 blocks
OsmoBTS context contains 1156678 bytes in 137 blocks
Change-Id: I5e9381902dace7dfd37f98b657e4697b5afcff96
Provide a sane means of adding the -Werror compiler flag.
Currently, some of our jenkins.sh add -Werror by passing 'CFLAGS="-Werror"',
but that actually *overwrites* all the other CFLAGS we might want to have set.
Maintain these exceptions from -Werror:
a) deprecation (allow upstream to mark deprecation without breaking builds);
b) "#warning" pragmas (allow to remind ourselves of errors without breaking
builds)
As a last configure step before generating the output files, print the complete
CFLAGS and CPPFLAGS by means of AC_MSG_RESULT.
Change-Id: I5b37602a117350159183fb53ac330294b94f4195
The existing algorithm (present since 2012!) failed to work
in the sole case that only *one* SACCH filling type was present.
So if you had your BTS configured to only broadcast SI5, but not
broadcast SI5ter, SI6 or any other SACCH filling, it would send
the SI5 message only once on a newly-established channel, and never
again.
The old code was working for more-than-one SACCH filling, as well
as for no SACCH filling at all.
Let's also add a NOTICE message if there is no SACCH filling available
at all. This is highly unusual and definitely a noticeable event.
Change-Id: Ica801f9b9c118f00d9e3dc2780b3123e925f59b4
Closes: OS#3057
Related: OS#2963
Record the mnc_3_digits flag from SI and pass on via the PCU interface.
Instead of changing to e.g. osmo_plmn_id, add the flag separately, and instead
of bool use a uint8_t, to not raise any struct packing issues and clarify the
flag's size beyond any doubt.
Bump the PCU interface version to 9.
This is one part of the three identical pcuif_proto.h patches:
- I49cd762c3c9d7ee6a82451bdf3ffa2a060767947 (osmo-bts)
- I787fed84a7b613158a5618dd5cffafe4e4927234 (osmo-pcu)
- I78f30aef7aa224b2e9db54c3a844d8f520b3aee0 (osmo-bsc)
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore)
Change-Id: I49cd762c3c9d7ee6a82451bdf3ffa2a060767947
When using a firmware version < 3.6, the call to l1if_mute_rf()
returned an error, which caused an OML CHG ADM STATE NACK.
Let's check if the l1if_mute_rf() call is an un-mute for all
timeslots (which apparently we do always at start-up). If it is, then
acknowledge it even if muting is not supported by earlier firmwares.
I suppose the change causing this problem was introduced in:
commit b26b8fc776
Author: Holger Hans Peter Freyther <zecke@selfish.org>
Date: Tue Mar 4 15:03:59 2014 +0100
sysmobts: Do a RF mute at initialization when the RC is locked
With the current change applied, we can run the BTS with earlier
firmware versions than 3.6.0 again. Tested with 3.1 and 2.4
Change-Id: I1a29c1031d96e65a0111bc812a90f2dbaf2a5aa3
SI1 is only required if frequency hopping is used or if NCH is used. So it's optional.
If OsmoBTS has no SI1 configured, it will transmit the empty SI1 buffer
at TC=0, and as a result no valid SI will be broadcast at TC=0.
Change-Id: I41ab885c00e943199b2e939e98f30e267ecffbee
Closes: OS#3051
Commit c2b4c668f3
I3b989580cb38082e3fd8fc50a11fedda13991092 introduces evaluation of ra_ind
members below the msgb_trim() call that actually invalidates ra_ind.
A symptom is that it breaks detection of Handover RACH, wich always ends up
with lchan == NULL and interpreting all RACH as chan_nr == 0x88.
Fix: do all evaluation of ra_ind before the msgb_trim(), for osmo-bts-sysmo,
litecell-15 and octphy.
To guard against similar mistakes in the future, set ra_ind = NULL before the
msgb_trim() call.
Related: OS#3045
Change-Id: I203021ee57f49cb963679ba8bec5943e2abb67fb
the file l1_tch.c in the octphy spcific code has its root in the
tch.c file of sysmobts. It contains some sysmobts specific ifdefs
which enclose dead code.
- Remove the sysmobts specif ifdefs and the dead code
Change-Id: I33f3e0fd293ca8387fddf5ed20f642621e9680de
In general, RACH bursts should not arrive with negative offset.
Let's limit early signal arrival up to 2 symbols, otherwise it
is most likely noise, interference or a ghost.
TTCN-3 test case: Icccc88545ed3aabd6da28a40599a8a77d1de477d
Change-Id: I662294fe3136cf7a259be13816a3e63f7db9a948
For some reason, the noise / ghost filtering was performed for
normal RACH requests, but not for handover RACH requests. There
are also ghost RACH, interference and noise possible, so let's
extend the filtering coverage.
Change-Id: I94fc15835280d624780200dadc4418210bf565ff
It makes sense to combine both existing BER (Bit Error Rate) and
ToA (Timing of Arrival) checks into a separate funcition, so
this code may be also used for handover RACH.
Change-Id: I1ddda238d5212a88a3dd5c4fc5dfcfea018151bd
Previously, the number of RACH slots with valid non-handover RACH
burst was incremented between both BER (Bit Error Rate) and ToA
(Timing of Arrival) checks. So, if a RACH burst passed the BER
check, but was dropped by ToA check, the counter of valid RACH
requests could be increased anyway.
Change-Id: I31594a8c5dce1f42226ced5b2dc8778152b3d829
The BTS_CTR_RACH_DROP counter is being increased in case if a RACH
request is ignored due to exceeding ToA value, but remains untouched
in case of exceeding BER (Bit Error Rate). Let's fix this.
Change-Id: Ia02e781d6c47d9d8012a4c8846fe4b731aab74d7
This was useful for software simulation of burst delay, expressed
by ToA (Time of Arrival). Since we have FakeTRX toolkit, ToA value
may be simulated in a more flexible way, so let's remove this code.
Change-Id: Ied0fcfcf58b93efdc6de9666fbbf8fea104e2543
The current log output logs connect_ip connect_port
speech mode and payload type over multiple lines and without
logging context (lchan name). Also the logging level
incorrectly set.
- shrink log output into one line.
- add context (lchan name)
- encode ip/port into human readable form
Change-Id: I61044edc0672b268aeebf48b59a772887703399f
Closes: OS#3001
Add PCU_IF_MSG_DATA_CNF_DT and PCU_IF_SAPI_AGCH_DT to bring the
pccif_proto into sync. Both commands are required to support the
rb11 with an osmo-bsc co-located pcu.
Change-Id: I6d330aca26249ee94ece5e415079f0b75c6e8b48
PCU_SOCK_DEFAULT is defined in the pcu counterpart of the file pcuif_proto.h
To be consistent with the pcu move the definition pcuif_proto.h
The pcuif_proto.h will be exact the same in the pcu repo and bts repo.
Change-Id: I67f8ec036e219994cc296d0ed5409da7f3ec681e
warning causes the compiler to throw an actual warning. Lets
change those intentional warnings to messages.
Change-Id: I2fc83a1a07db9c569b93f29835bf3a0fd8ef4ef5
In OsmoBTS, we (so far?) only have a single BTS inside each process,
let's make sure we log an error message if the PCU should ever want to
transmit primitives to a non-zero BTS number.
Change-Id: I158f935fed12941737c806c0677a8192ea3418a0
Don't blindly trust that the ts_nr received on the PCU socket will be
small enough to not overflow our timeslot array!
Change-Id: Ie9964c8dc0ca7b049da7dfec0ac0a0d3f1aedd45
The downstream code of pcu_sock.c doesn't contain any length checks,
so let's discard any messages that are shorter than the primitive
length.
Change-Id: I35ac84d4db6d21ea61afbd1864c810bbf601d69b
Normal Abis RSL MEasurement Results contain only the "MS Timing Offset
IE" in units of full symbols. In some use cases it is important to have
higher-accuracy timing information exposed to the BSC.
We do this by adding the average timing offset value during the last
measurement interval in 1/256th symbol accuracy to the "Supplementary
MEasuremen Information" part of the TS 48.058 9.3.25 Uplink Measurements
IE.
In order to avoid any compatibility issues, this feature is only enabled
if the new vty config command "supp-meas-info toa256" at the bts node
is enabled.
Change-Id: Ie85e53b47d4041cc4e6d7b78406ae8b79b2d9397
At the end of a measurement processing window, we currently compute
the ToA / timing offset at 1/256th symbol accuracy, but we only print
it to the log. Let's store the value in the lchan to make it usable
by other code in follow-up patches.
Change-Id: I5f00a16ac966b627d9452a98b8fa70984bed684a
Before this patch we had:
* osmo-bts-trx internally using 1/256th bit/symbol period
* osmo-bts-sysmo internally using 1/4 bit/smbol period
* PCU interface using 1/4
* L1SAP interface using 1/4
* measurement processing code on top of L1SAP using 1/256
So for sysmo/lc15/octphy we are not loosing resolution, but for
osmo-bts-trx we're arbitrarily reducing the resolution via L1SAP
only then to compute with higher resolution again.
Let's change L1SAP to use 1/256 bits and hence not loose any resolution.
This requires a corresponding change in libosmocore for l1sap.h, which
is found in Change-Id Ibb58113c2819fe2d6d23ecbcfb8b3fce4055025d
Change-Id: If9b0f617845ba6c4aa47969f521734388197c9a7
There's no need to express TOA as a float:
* We receive it as signed 16bit integer in units 1/256 symbol periods
* We pass it to L1SAP as signed integer in 1/4 symbol periods
So turn it into an int16_t with 1/256 symbol period accuracy throughout
the code to avoid both float arithmetic as well as loosing any precision.
Change-Id: Idce4178e0b1f7e940ebc22b3e2f340fcd544d4ec
When decoding RACH bursts, we should use a BER threshold in order to
help distinguish 'ghost' RACH bursts from real RACH bursts.
The theoretical ideal threshold according to some papers is 7 out of 41
bits qhich aquals to Eb/N0 of 0 dB = 0.1707 (17.07%)
We add a new 'ber10k' parameter to the RACH indication l1sap primitive
(needs separate change for libosmocore), and then fill this value from
osmo-bts-{sysmo,lc15,trx,octphy}. The common part above L1SAP then
applies the threshold, which can be changed from vty using the
"max-ber10k-rach <0-10000>"
command available at the BTS node. The unit is BER in 1/10000, i.e. a
value of 100 equals 1% bit error rate.
Change-Id: Ic41c11f6312a36baa2738547e8dcec80829457f8
In the past, rach_busy counting was performed below L1SAP, while
reporting was handled above. This lead to subtle differences between
the BTS models, such as osmo-bts-trx missing to increment rach_busy.
Let's move the rach_busy counting above L1SAP to share more code.
This means we need libosmocore Change-Id
I9439810c3a3ad89ea0302753617b850749af887c for the additional required
parameters in ph_rach_ind_param, as well as libosmocore Change-id
I2b1926a37bde860dcfeb0d613eb55a71271928c5 for osmo-bts-trx to determine
the RACH bit error rate.
Change-Id: I3b989580cb38082e3fd8fc50a11fedda13991092
Closes: OS#3003
The existing code contained an ugly hack that if we didn't have any
"SUB" measurements we would simply use the "FULL" values. That's wrong
as TS 45.008 contains quite detailed rules on how the "SUB" values are
to be computed. In some cases, they are identical to "FULL", but in
most they are not.
Let's remove the hack and replace it with an ERROR message, as clearly
something is wrong if we ever encounter a measurement period end in
which no single "SUB" measurement was received. The only situation in
which this can occur is if the related uplink burst/block was missing,
so let's set BER to 100% and level to lowest possible.
Change-Id: I358f7b97fd4ea19264a77eff7abef13da7d5fbcd
The rules on how to compute RX{LEV,QUAL}-SUB are rather convoluted, and
depend on the detailed channel type and mode.
For SDCCH and TCH/H in signalling mode, it's easy: No DTX is allowed,
and all measurements are used in SUB.
For non-AMR (TCH/F and TCH/H in non-signalling mode), we need to count
the SACCH block measurements, as well as any
SID/SID_UPDATE/L3_FILL/DUMMY blocks received in the blocks of table
8.3 of TS 45.008.
Only AMR (TCH/AFS + TCH/AHS) are more difficult, as there are no fixed
blocks/bursts/frames that always contain uplink messages, but the L1
will have to determine if a valid SID_UPDATE was received or not.
This patch implements the above rules (except AMR related) in the common
part of OsmoBTS. The AMR specific bits will have to follow as a later
patch, likely in a BTS specific way, i.e. separate changes to
sysmo/lc15/octphy/trx code.
Related: OS#2978
Change-Id: I16eb3747a1c23df935a4c50dafe46abce512a474
There are use cases for the multiframe scheduler tables outside the
context of the entire scheduler. Let's prepare for that.
Related: OS#2978
Change-Id: I6a501e66c47809ae3cdc55bef2cb6390ee0096b1
Combined CCCH with CBCH is a separate PCHAN type and hence we must
accept it in the list of RACH-carrying pchan types in order to correctly
report the RACH chan_nr when handing RACH requests up to L1SAP.
The bug this fixes likely might have rendered cells with combined CBCH
impossible to use.
Change-Id: I9537463e5eedd2b8b30f298e0d3b308367c5b1fb
L1SAP uses 'ber10k' values, i.e. BER in 1/10000 units, where 10000
is all errors are bit-errors (= 100%).
The PHY on osmo-bts-sysmo and osmo-bts-lc15 is reporting a float fBer
value scaled to 1, i.e. 1.00 = 100% and hence must be 10000 as ber10k.
Before this patch, BER values reported on those BTS models were too
low by a factor of 100, resulting in way too optimistic RxQual values
reported to the BSC.
Closes: OS#3005
Change-Id: I17e2f8fe8055f613da1e554cd36ed13289f56fb3
Let's introduce some functions to hide the details of BER and RSSI
conversion from OCTPHY representation to L1SAP representation.
Change-Id: I517669c87a97b2ba164a2812811c8802fe0b92e8
Since Change-Id: I23fba50f48415314da40cf5bf86fce2ed3e66af6 we were not
reporting measurements for SDCCH channel types due to the wrong
encoding of the sdcch{4,8}_meas_rep_fn102 table.
Let's fix the table by encoding the needed information:
"What is the modulo-102 remainder of the first burst of the last block
before fn%102 reaches 37?" (SDCCH/4)
"What is the modulo-102 remainder of the first burst of the last block
before fn%102 reaches 12?" (SDCCH/8)
The TS 45.002 Clause 7 tables have to be consulted carefully to
determine this information.
Change-Id: Icf02354872670126ab3297b787b216981ca6c309
Related: OS#2965
In case a DLCX _with conn-id_ is issued without any CRCX before,
we ran into a NULL pointer dereference in adding the connection
statistics. Let's handle this gracefully and simply return empty
statistics.
Change-Id: If8b71266c847b90cdc51695b9f47b527c51bd70c
Closes: OS#2996
Harald Welte
Vadim Yanitskiy
Philipp Maier