At the moment osmo-bts does not compile with the latest header
file release from OCTSDR-2G-02.10.00-B1837-ALPHA as there are
struct members removed and new ones added. The changes do not
affect actual functionality in the existing code. The only
affected parts are vty functions that query status information
about the clock sync manager.
- Add detection logic in configure.ac to detect if the affected
struct members are present
- Add conditional compiling to handle the different combinations
of available struct members.
Change-Id: Ic38d8dc35522205c4ffab583b4e61b5ef03cdba2
Related: SYS#4139
Patch-by: Octasic inc.
gsm_bts_role_bts was introduced at a time when we still shared
gsm_data_shared.[ch] between BSC and BTS, and where we then subsequently
needed a BTS-private structure. Since that sharing was abandoned quite
some time ago, we can merge gsm_bts_role_bts into gsm_bts and do away
with the bts/btsb dualism in a lot of the code.
Change-Id: I4fdd601ea873d9697f89a748cc77bcf7c978fa3e
Commit c2b4c668f3
I3b989580cb38082e3fd8fc50a11fedda13991092 introduces evaluation of ra_ind
members below the msgb_trim() call that actually invalidates ra_ind.
A symptom is that it breaks detection of Handover RACH, wich always ends up
with lchan == NULL and interpreting all RACH as chan_nr == 0x88.
Fix: do all evaluation of ra_ind before the msgb_trim(), for osmo-bts-sysmo,
litecell-15 and octphy.
To guard against similar mistakes in the future, set ra_ind = NULL before the
msgb_trim() call.
Related: OS#3045
Change-Id: I203021ee57f49cb963679ba8bec5943e2abb67fb
the file l1_tch.c in the octphy spcific code has its root in the
tch.c file of sysmobts. It contains some sysmobts specific ifdefs
which enclose dead code.
- Remove the sysmobts specif ifdefs and the dead code
Change-Id: I33f3e0fd293ca8387fddf5ed20f642621e9680de
warning causes the compiler to throw an actual warning. Lets
change those intentional warnings to messages.
Change-Id: I2fc83a1a07db9c569b93f29835bf3a0fd8ef4ef5
Before this patch we had:
* osmo-bts-trx internally using 1/256th bit/symbol period
* osmo-bts-sysmo internally using 1/4 bit/smbol period
* PCU interface using 1/4
* L1SAP interface using 1/4
* measurement processing code on top of L1SAP using 1/256
So for sysmo/lc15/octphy we are not loosing resolution, but for
osmo-bts-trx we're arbitrarily reducing the resolution via L1SAP
only then to compute with higher resolution again.
Let's change L1SAP to use 1/256 bits and hence not loose any resolution.
This requires a corresponding change in libosmocore for l1sap.h, which
is found in Change-Id Ibb58113c2819fe2d6d23ecbcfb8b3fce4055025d
Change-Id: If9b0f617845ba6c4aa47969f521734388197c9a7
In the past, rach_busy counting was performed below L1SAP, while
reporting was handled above. This lead to subtle differences between
the BTS models, such as osmo-bts-trx missing to increment rach_busy.
Let's move the rach_busy counting above L1SAP to share more code.
This means we need libosmocore Change-Id
I9439810c3a3ad89ea0302753617b850749af887c for the additional required
parameters in ph_rach_ind_param, as well as libosmocore Change-id
I2b1926a37bde860dcfeb0d613eb55a71271928c5 for osmo-bts-trx to determine
the RACH bit error rate.
Change-Id: I3b989580cb38082e3fd8fc50a11fedda13991092
Closes: OS#3003
Let's introduce some functions to hide the details of BER and RSSI
conversion from OCTPHY representation to L1SAP representation.
Change-Id: I517669c87a97b2ba164a2812811c8802fe0b92e8
Let's make sure whenever we do have a frame number, we print it as
context in the related log line
Change-Id: I751d5ddb3322fce489bc241459738cbcc55c890b
osmo-bts has a table of pchan/channel mode combinations for every
bts. This table models the codec capabilitys of the BTS hardware.
However, having the speech codec apabilities modeled inside the
BTS feature list would be much more comfortable and since the
feature list is communicated back to the BSC we would get the
codec capabilities inside the BSC domain as well.
- remove the pchan/channel mode tables
- set speech codec variants for each BTS type
- fix bts_supports_cm so that it queries the feature list
Change-Id: I977dc729ba856631245aedf76afd48eac92166f7
Most of the BTS models do not or do register not all of thier
features to the the feature list.
- Update/extend the feature lists for all BTS-Models
Change-Id: I26765a64153368016921c2ac115b1c4aec9bc5e4
When the BSC sends a MODE MODIFY request with an unsupported
codec, the BTS must respond with a negative acknowledge.
Currently the codec parameter is not checked at all, which may
lead into malfunction or crash of the BTS.
- Introduce a mechanism to check the codec/rate against a
table that is set up in the phy specific code.
- Add tables with supported codec/rate combinations for
octphy, sysmobts, and trx.
Change-Id: Id9b222b7ab19ece90591718bc562b3a8c5e02023
Related: SYS#3212
Previouslywe could end-up passing empty '-I' to compilerif corresponding
_INCDIR variable was not defined during the ./configure step. This is
apparently tolerated by gcc but still seems like a wrong thingto
do. Let's fix this by moving -I inside of *_INCDIR.
Change-Id: I80915e5756d1bf64d789cfd5341fdd417ca8eed9
The function trx_by_l1h() is used to fetch the pointer to a an
osmo_bts_trx from a list. The ID that is used to reference the
transceiver comes from the incoming message. If the firmware
sends odd identifiers (firmware bugs, damaged packets) the
transceiver can not be found in the list and a nullpointer is
returned, which then leads into a nullpointer derefernece
problem.
Check the returncode, and depending on the situation either
return with -EINVAL or exit osmo-bts immediately.
Change-Id: I04ef3b4896e1322c2a6d29ea86a88994c7748bf7
Contrary to osmo-bts-sysmo, the OCTPHY-2G does not have different L1
SAPI for AGCH and PCH. It uses cOCTVC1_GSM_SAPI_ENUM_PCH_AGCH for both,
and we convert that to the cbits=0x12 (Downlink CCCH) on the L1SAP.
The code above L1SAP can hence freely decide if it wants to respond with
an AGCH or PCH message, based on its knowledge of BS_AG_BLKS_RES,
without the OCTPHY specific code having to do anything about it.
Hence, there's nothing to do, and the warning can be removed
Change-Id: Ic1038b8dc57bdaf05493cd8479355b960275ea41
Related: OS#1575
When osmo-bts detects a mismatch between the firmware of the DSP
and the header version which it was compile with, a hard exit
is performed. In some cases this may hinder debugging/testing things.
Implement a commandline option to intentinally override the check.
Change-Id: I5774fbb29da832786326afb991014b9bd8b04b59
* copy-paste gsm_data_shared.* from OpenBSC master
* remove corresponding configure check and option
* remove .deb dependency
Actual refactoring with removal of unnecessary structures/parts, moving
common OpenBSC/OsmoBSC parts into libraries etc. are left for further
patches.
Current patch will make coexistence with *BSC easier and will simplify
our build infrastructure.
Change-Id: I9f004fb5c4c1db29d4792dfd281d388c7063da13
Related: OS#1923
Implement API functions bts_model_ts_connect() and
bts_model_ts_disconnect() in order to support dynamic timeslot
allocation.
Change-Id: Ia109d4bfade7bc28442127581f4bb0289146ea71
So far, L1SAP code is hiding RSL_CHAN_OSMO_PDCH from the bts specific
code below L1SAP. This is some kind of a hack/workaround, making code
and debug output / logs more difficult to understand.
So let's teach the lower layer how to treat RSL_CHAN_OSMO_PDCH and
remove the "hiding" code from the common l1sap.c code.
Change-Id: Iaaa833febe45b82166d3901f10cc5466a7591c19
The octasic phy stamps the SACCH channel that carries the
measurmenet indication with the frame number of the last
SACCH that falls within the measurement period.
The higher layers expect the frame number to be aligned
to the SACCH channel after, which marks also the beginning
of the next measurement period.
Make the octphy code compatible to the higher layers by
remapping the measurement indication frame number.
Change-Id: I8ecb27c018bf4ad5151878a6ad34026fd0f801a1
ph_data_req() and ph_tch_req() are generating empty (idle)
frames when no data (msg == NULL) is available. Since the
phy is able to generate idle frames internally, there is
no need to waste Host CPU cycles by doing this in software.
Remove the empty frame generation and exit the function
cleanly.
(Patch by Octasic Inc.)
Change-Id: Ib857b7dab490ad426c48d6a9e5e6fa10ef5a0838
We want to always call l1if_tch_rx and l1sap_up in order to avoid losing triggering
events on the upper layer.
With this change, the upper layer will increase correctly seq + ts for
RTP. It will then send an RTP packet with only the header and no payload, which is
not correct but at least we avoid drifting the RTP clock. Upcoming patch
in the series solves this issue.
This patch assumes that we are not lossing data events from the physical
layer and that we receive an event every 20ms, even if the MS is not
transmitting due to DTX.
Depends on libosmocore If4ae20c22b881e94585dad710f17b9e37f77bf82
Change-Id: If5df8940fab833eb4e3ed851880b66987d356031
The value string table octphy_cid_vals lacks the strings for
cOCTVC1_MAIN_MSG_APPLICATION_INFO_CID and cOCTVC1_MAIN_MSG_APPLICATION_INFO_CID
(Patch by Octasic Inc.)
Change-Id: I9843137b55534a29938d5c2308244a6950de788f
When handle_ph_data_ind() runs BER and RSSI is logged. Remove
this log output by removing the call to dump_meas_res
(Patch by Octasic Inc.)
Change-Id: I5e755465daa3daec2e2b4f61bc8d779c49196e9a
nmsg is initalized every time the function runs, even when it
is not needed. Move the initalization into the if (msg) body
so that nmsg is only initalized when we really need it.
(Patch by Octasic Inc.)
Change-Id: If51dc50a9f4bdb4aba62c0ae5fbfac552806f0c0
l1msg is initalized when the variable is declared. This means
the allocation always runs right on the beginning. Even when
the buffer is not needed at all.
do a prober l1msg initalization only when needed and check the
return code.
(Patch by Octasic Inc.)
Change-Id: Ia71d49b9cc109af53d997a687a7fb1b5ed062d1c
Printing the RX payload size is strictly informative, so the
loglevel LOGL_ERROR is wrong. This commit changes it to
LOGL_DEBUG
(Patch by Octasic Inc.)
Change-Id: I712cdd79cbba93f457705d38871bd8d4b7f4e897
Set (possibly incomplete) list of BTS model-specific features and report
them in response to attribute request via OML.
Change-Id: I5f8a6681c3562ec261441e84dde6e085b516d92f
Related: OS#1614
The priv pointer of the callback function app_info_compl_cb() is
set to null by the pointer. It should be set to pinst instead.
Besides of that there is a memory violation while accessing
the local variable ver_hdr using osmo_strlcpy(). Both is fixed
with this commit.
Change-Id: I558d78ef29e9a4d8f45f4142611f11289d3ed806
This is resubmission of 9eeb0b1a13 with
errorneous use of talloc_asprintf() removed which should fix OS#2316.
Change-Id: I02ae6fffdc808c1ea14185dbb4a720d27a62d4bb
Related: OS#1614
This reverts commit 9eeb0b1a13.
This commit caused osmo-gsm-tester test runs for the sysmoBTS to fail with
SIGABRT consistently. See below redmine issues.
In osmo-bts-sysmo/l1_if.c, it uses talloc_asprintf to write to the char
version[MAX_VERSION_LENGTH]; talloc_asprintf() however is intended to work on
string buffers allocated by talloc, and attempts to reallocate version[].
Furthermore, it is not clear why the patch passes a 'data' arg to
app_info_sys_compl_cb() that is not used.
Hence I will revert this instead of trying to fix. Please resolve issues and
re-submit.
Related: OS#2316 OS#1614
Change-Id: I2c9fd5e6739c1750365c0241476ce4b1aa2df3d4
Event handling is done internally in the Octasic BTS. When the TRX is opened,
events are enabled automatically and when TRX is closed events are disabled.
The change is valid for the recent firmware version and for the last couple
of previous releases.
Change-Id: I0652627495f6a9bcb0da2431b8beb839bc22062b
recent octphy firmware versions do support proper channel measurement handling.
The new implementation replaces the old, and for osmo-bts non functional
implementation.
This commit introduces the necessary adjustments. Older firmeware releses will
still work. However, the measurement computation results will still be wrong.
Change-Id: I0f053bb10b1cb112a8814ee591969d607888e686
The l1 interface does not explicitly set the flag for 11 bit
rach when a rach request is received. Since the current and
previous octphy firmwares do not support 11 bit rach requests,
the flag should be explicitly set to zero.
Change-Id: Ifa165c56e54d272caafa45d1bf0e177848fcdfbd
Firmware releases OCTSDR-2G-02.07.00-B1314-BETA and newer require
to align the GPRS frame number (fn-3) for ph_data indications.
To preserve compatibility the header version is checked during
compile time and the right method is compiled in.
Change-Id: Ib93d5fb3b34ff92f10021a0e9ce9c8aa3044b7ff
CBCH is activated when the SAPI for TS0 is activated. Since the CBCH can be
configured on any physical TS, we wait until all (TS7 is the last) physical
timeslots are configured.
Change-Id: Ie307bf9f370a346686e3bd8c8a8483953a1bc279
add support for the TX/RX antenna-id feature that has been
introduced with release OCTSDR-2G-02.07.00-B1314-BETA. The
user can now set individual ID numbers for the TX and for
the RX antenna.
Change-Id: I872fe3c4d7b593358a4ce2f02cf0726611b9f3aa
With octasics latest release (octsdr-2g-02.07.01-B1351-beta), some struct
members are moved or renamed. This patch adds ifdef-logic and configure
checks to restore compatibilty.
Change-Id: I73287983e8bed8bf64b2ab87e6b810c2c59ea6fd
Some header file versions support multi-trx and some do not. After
to compiling it is very difficult to find out if the binary is
multi-trx capable por not. This patch adds a log line that should
rule out any doubts.
Change-Id: I257c0a5e7c5ff5df2f0a603d1ede6db5679382e0
octphy_hw_get_rf_ant_tx_config() uses define constant
cOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_CID instead of
cOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_CID. This commit
replaces exchanges the wrong constant with the correct one.
Change-Id: Ie4de23daf79bb07ca0c0b818eefe350d18d27e4d
The VTY commands show phy 0 rf-port-stats and show phy 0 clk-sync-stats
do not output their results on the VTY console. If one of those commands
is entered the user is prompted to view the logtext, which is an
uncomfortable solution. This commit adds the missing functionality to
print the information in the VTY as well.
octphy_hw_api.c contains two value_string structs (radio_std_vals and
clocksync_state_vals) which are now exported in octphy_hw_api.h in
order to access them from octphy_vty.c
Change-Id: Iae5aa91fe2ebba7c2874eed88b15ed66e8c9cd61
The vty write for phy/inst is broken, leading to a written-out config being
unparsable; fix all of these:
- in common/vty.c, actually call bts_model_config_write_phy_inst().
- in sysmo and lc15 write the phy instance elements in
bts_model_config_write_phy_inst() and not in bts_model_config_write_phy(),
which lead to writing the members above their parent 'instance'.
- sysmo, lc15 and oct omit the bts_model_config_write_phy_inst()
implementation. This did not cause a compilation problem because it
was in fact never called.
- sysmo writes 'clock-source None' when clk_src is zero, leading to unparsable
config (related: OS#1944). Instead omit the 'clock-source' when zero.
- osmo-bts-trx seems to be the only part that lacks nothing, yet it
also didn't work properly because bts_model_config_write_phy_inst()
was never called.
This problem existed since commit d784e50747
"Introduce new phy_link and phy_instance abstraction"
Change-Id: Icc54fa70045c8fa58e78cf9f788c21a437edfbd4
Philipp Maier
Harald Welte
Neels Hofmeyr
Pau Espin
Neels Hofmeyr