If there's nothing to transmit over a CSD NT channel, both ends generate
NULL frames. Let's add an option to suppress GSMTAP output for those,
creating pcap files with less noise.
Change-Id: I85a2159cfaa01bfb4205c1462e3a9dbda68e4bad
Depends: libosmocore.git I2d9bd8eb4f0cd0f72c436996767b199429596917
In CSD (Circuit Switched Data) NT (Non-Transparent) mode, there
are RLP (Radio Link Protocol) frames inside the modified V.110.
wireshark alrady has a dissector for this, and we've introduced
a GSMTAP type for RLP some time ago. So with this patch, we now
generate such GSMTAP RLP frames.
Change-Id: I6a258458822bcb3fe7290a9b9b3d104beecda219
Title refers to the maximum length of the osmo_wqueue used for
the PCU socket connection.
Related: OS#5774
Change-Id: Id6ba6e4eadce9ce82ef2407f4e28346e7fe4abfa
Current osmo-bts-trx includes a provision for invoking ECUs from
libosmocodec in the UL path from the channel decoder to the RTP
output. This pre-existing implementation is counter to the spirit
of 3GPP specs (a BTS should merely mark BFI conditions in its UL
output, as opposed to actively modifying the frame stream with an ECU),
inconsistent between different osmo-bts models (only in -trx and no
others), and inconsistent even within osmo-bts-trx itself, where
the link quality check in l1sap will sometimes suppress the output
of the ECU - a quirk which the designers of the current mechanism
most certainly did not intend.
The solution decided upon in OsmoDevCall on 2023-06-21 is to make
this ECU optional per vty config, and move it from the trx model
to the common layer to resolve the inconsistencies. Implement the
first part: make the ECU application optional per vty config.
For backward compatibility with existing deployments, the new
"rtp internal-uplink-ecu" setting is enabled by default on osmo-bts-trx
but not on any other models.
Related: OS#6040
Change-Id: I0acca9c6d7da966a623287563e0789db9e0fae8e
The new vty option "rtp hr-format (rfc5993|ts101318)" selects the
RTP output format to be used for HR1 codec, consistently across
all models. The default is set to match legacy behavior: ts101318
on osmo-bts-{lc15,oc2g,sysmo} and rfc5993 on osmo-bts-trx.
On models where no legacy behavior is applicable, the default is
set to rfc5993 as a forward-looking measure - see OS#6036.
Closes: OS#5688
Change-Id: I168191874a062429a57904511a1e89e3f588732e
In some environments it is highly desirable for the RTP stream
coming from each GSM call UL on a BTS to be fully continuous,
without any gaps, with _some_ RTP packet emitted every 20 ms,
even if there is no speech or SID frame to be sent in that frame
time window. The present change adds an rtp continuous-streaming
vty option which, when enabled, causes the BTS to emit RTP packets
with a zero-length payload, instead of producing gaps in the RTP
stream, when it has nothing else to send.
Related: OS#5975
Change-Id: Ic0e2edf2ed90ba0ac6bee5e7d9629bf0255e256d
Most of the BTS specific VTY commands restrict BTS number to '<0-0>',
while bts_c0_power_red_cmd has '<0-255>'. This confuses libosmovty:
OsmoBTS# bts ?
<0-0> BTS number
<0-255> BTS Number
OsmoBTS# bts 0 ?
% Ambiguous command.
OsmoBTS# bts 0 c0-power-red 0
% Ambiguous command.
Let's stick to '<0-0>', we don't support multiple BTS anyway.
Change-Id: I937ac421143678b97627c1bc4fe573831ce097f6
Similar to what is already provided for power control loops. However,
there's no existing way to communicate TA control parameters from the
BSC to the BTS, so implement them locally in BTS vty.
Related: SYS#5371
Change-Id: I9fa71f836bb9a79b0ef2567bfcfdf38ff217840b
Tests have shown that even a delay of 0, i.e. a simple defer until the
next select() loop, makes the difference from failing to working early
IA. So set the default to 0, achieving such defer.
Related: SYS#5559
Change-Id: I95365649edd51114bcf6028f0dc3bbe4186f96d2
During live testing, it has become apparent that some IMM ASS still fail
when sending the RR IMM ASS directly upon the target channel becoming
active.
Add a bit of delay after activation, to give some time for the channel
to light up for the MS. Default is 50ms.
Related: OS#5559
Change-Id: Ia1e63b98944dc840cde212fc732e20277cdc5585
We have two osmocom specific timers used in the BTS, X1 and X2. Expose
those on the VTY configuration, as timer group 'bts'.
This prepares for a subsequent patch, where I would like to add another
configurable timer. This provides the basic infrastructure for that.
Related: SYS#5559
Change-Id: I0f56f9425134679219884b0c3c2f29e77aff5e64
This is not as trivial as with OsmoBSC or OsmoMSC, because normally the
osmo-bts process exits right away when there is no BSC. Hence add
--vty-test option to main.
Use 'osmo-bts-virtual --vty-test' for testing. The other BTS models
require dependencies / configure switches to be built.
Essentially copied from osmo-bsc.git:
configure.ac: add --enable-external-tests
tests/Makefile.am: add 'vty-test' target
Add osmo-bts.vty, some trivial VTY node testing.
This prepares for adding VTY tests for T timer configuration added in a
subsequent patch.
Related: SYS#5559
Change-Id: I730daf548a3a9bb116aa8b6d5772ca9af0ada08f
Harald Welte
arehbein
Pau Espin
Vadim Yanitskiy