In case a given channel combination contains a CBCH, it replaces sub-slot 2
with a CBCH, i.e. we must not attempt to allocate the same for SDCCH.
On timeslot initialization, immediately place such an lchan FSM into new state
LCHAN_ST_CBCH, so that it never appears unused and never is picked during
lchan_select(). Also set lchan->type = GSM_LCHAN_CBCH.
Verified by configuring CBCH timeslots and watching 'show lchan summary'.
Immediately after RSL and OML are up, these pchan types show lchan 2 in state
CBCH:
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 2, Type CBCH, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 2, Type CBCH, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
With a 'phys_chan_config ccch+sdcch4+cbch' and three phones simultaneously
requesting USSD, I see:
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 0, Type SDCCH, State ESTABLISHED - L1 MS Power: 14 dBm RXL-FULL-dl: -53 dBm RXL-FULL-ul: -47 dBm
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 1, Type SDCCH, State ESTABLISHED - L1 MS Power: 30 dBm RXL-FULL-dl: -47 dBm RXL-FULL-ul: -47 dBm
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 2, Type CBCH, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 3, Type SDCCH, State ESTABLISHED - L1 MS Power: 16 dBm RXL-FULL-dl: -47 dBm RXL-FULL-ul: -47 dBm
With 'phys_chan_config SDCCH8+CBCH' and three phones simultaneously attaching,
I see:
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 0, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 1, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 2, Type CBCH, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 3, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
i.e. in all cases the CBCH lchan remains occupied and is not allocated as
SDCCH.
Detaching and re-attaching the BTS reliably brings back the CBCH state. Also
verified that changing the osmo-bsc config from telnet vty and dropping oml
followed by the BTS re-attaching brings back the CBCH state.
Change-Id: I2bafc5f696e818e38f8907ad0c8f38494df0623d
526b4a5f35