Make sure that the target lchan has been initialized before attempting
to reassign.
I ran into this in the VAMOS tests, forgetting to set the BTS_FEAT_VAMOS
in osmo-bts-omldummy: the vty command from ttcn attempts to reassign to
a non-initialized lchan, and aborts osmo-bsc.
Change-Id: Ia77a3312dde0e4b8df9ad2f33339266bae06439d
The RSL_CHAN_OSMO_VAMOS_MASK mask applies to the chan_nr,
but the cbits variable in rsl_lchan_lookup() is chan_nr >> 3.
So the mask didn't do its job. Now it does.
A bit embarrassing how i took the suggestion to use this mask and put it
into code without testing it. It looked good enough...
Change-Id: I005c5f319bb6f14651aeb613cdff52e79f761913
Pass flag into find_alternative_lchan() indicating that a TCH/H channel
has low ratings (rxqual or rxlev, doesn't matter).
Heed this flag in the last round, the requirement A check, and allow
candidates that have equal rxlev, if they result in an upgrade from
TCH/H to TCH/F. This allows intra-cell upgrades to TCH/F.
An important point is that this patch allows upgrade to TCH/F *without*
the AFS bias setting. See also I315f24123ae016887ab91666870ce252e096f90f.
Related: SYS#5198 SYS#5365
Change-Id: Id40d1cf8b58410c7d4eb87407fe8b8106e352438
Drop terminating newline from an assignment_fail() call which causes an
erratic line feed in logging.
Change-Id: Ib56e1f6a45c7e2c235f8ef0c8dea7151481677ab
Add VTY command to trigger an intra-cell re-assignment, also allowing to
re-assign to a secondary VAMOS lchan.
Related: SYS#5315 OS#4940
Change-Id: If006f5caaf83b07675f57e5665cfa79328da55e6
Add the Osmocom-specific extension to indicate VAMOS shadow lchans in
RSL, in lchan lookup and RSL message transmission.
Note that RR messages containing cbits (Assignment Command, Handover
Command, ...) must *not* send Osmocom specific cbits to the MS. Only the
RSL messages directed to the BTS send Osmocom specific bits.
Related: SYS#5315 OS#4940
Depends: If33c1695922d110c0d2c60d5c0136caf2587194e (libosmocore)
Change-Id: I957eff0d2c33ec795eda75a4bff21965b0179f73
It's bad to abort the program for an incompatible chan_nr. Instead of
OSMO_ASSERT(), make sure that error handling happens all they way to the
original callers of gsm_lchan2chan_nr etc.
This is also preparation to add further error causes: Osmocom specific
cbits needed for a non-Osmo BTS.
Related: SYS#5315 OS#4940
Change-Id: I71ed6437c403a3f9336e17a94b4948fca295d853
There is some odd repetition of macros with all possible subslot
indexes, but now we are using the defined macros instead of magic
numbers, making it easier to see that it is correct.
Also this allows trivially adding VAMOS cbits cases to the existing
switch() in a subsequent patch.
Change-Id: I4c6ce2f4ca999c19a58909b9adb849a3b8b6ffc8
Change gsm_lchan_name_compute() to a function that in-place updates the
lchan->name. That allows calling it numerous times with the talloc
handled internally. Rename it to lchan_update_name().
Add 'shadow' to lchan_update_name() and lchan_fsm_update_id() for VAMOS
shadow lchans, and also print the lchan index that it is a shadow for,
instead of the index in the lchan array.
When set_pchan_is() updates the VAMOSness of the lchans, call
lchan_fsm_update_id(). From lchan_fsm_update_id() also call
lchan_update_name().
This is a bit convoluted for legacy reasons. There are utility programs
and C tests using bts_trx.c but not lchan_fsm.c. lchan_update_name()
lives in gsm_data.c for that reason. This patch calls
lchan_update_name() from lchan_fsm_update_id() and not vice versa to
avoid having to add stubbed lchan_fsm_update_id() functions to all
utility programs and C tests.
We can't easily unify the lchan->name and lchan->fi->id without lots of
refactoring rippling through all those little utility programs and C
tests.
Change-Id: I7c2bae3b895a91f1b99b4147ecc0e3009cb7439a
So far there is a bunch of code setting a primary lchan in VAMOS mode.
This patch now adds the actual secondary "shadow" lchans that may be
combined with a primary lchan in VAMOS mode to form a multiplex.
VAMOS lchans are put in the same ts->lchan[] array that keeps the
primary lchans. They are at most two additional usable lchans (for a
TCH/H shadow) added to either TCH/F or TCH/H.
Keeping these in the same array allows looping over all lchans easily.
The ts->max_primary_lchans indicates the index of the first VAMOS shadow
lchan.
Related: SYS#5315 OS#4940
Change-Id: I928af99498bba488d317693f3144d4fccbbe9af3
We already send the TSC Set in the RSL Channel Activation, telling the
BTS about the TSC Set. The MS needs to be instructed of the TSC Set in
the RR Assignment Command.
The first code to actually do an Assignment to a VAMOS activated lchan
will follow in If006f5caaf83b07675f57e5665cfa79328da55e6.
Change-Id: Ibf3b6d276fadf724c16a5225c03e96a27a056153
Add function lchan_activate_set_ch_mode_rate_and_mr_config() and call it
for both plain channel activation and after a mode modify that needs RTP
activation. The AMR config was missing after Mode Modify.
Related: SYS#5315 OS#4940
Change-Id: I842fe7a14a91d1ec123cb4a3f52afe34456c03e3
lchan->activate.info.ch_mode_rate should remain unchanged, it is the
immutable request data. However, for VAMOS, we will want to
automatically see that the chan_mode is chosen correctly.
As a first step, place a mutable ch_mode_rate copy at
lchan->activate.ch_mode_rate, i.e. not in .activate.info, but in
.activate. Use that everywhere.
This is mostly a non-functional change, preparing for a subsequent patch
that adds handling of VAMOS shadow lchans.
As side effect of adding lchan_activate_set_ch_mode_rate_and_mr_config()
after MODE_MODIF_ACK (enabling the voice stream after a channel mode
modify), fix AMR config: the call to lchan_mr_config() was missing.
Change-Id: Icc9cc7481b3984fdca34eef49ea91ad3388c06fe
A subsequent patch will add to this VTY command, so let's first test the
current status as a baseline.
Change-Id: I6379e306fb8fa6ec227125c6cf14893d674e7596
VAMOS shadow lchans do not exist yet, but add the indicator flag that
tells whether an lchan pointer is a primary or a shadow lchan.
In Mode Modify: based on the flag, choose a different default TSC Set
for shadow lchans; do BTS type compat checking for shadow lchan use.
Actual lchans with vamos.is_secondary == true will be introduced by
patch: 'add VAMOS secondary lchans to timeslot struct'
I928af99498bba488d317693f3144d4fccbbe9af3
Change-Id: I4072fc7703c592df699fe8e27c02df09acde0909
Put a (primary) lchan in VAMOS speech mode.
This is not yet about activating shadow lchans, this merely puts any
lchan in a VAMOS capable channel- and speech mode.
Protocol:
In RR Channel Mode Modify, send a spec conforming VAMOS channel mode as
well as an Extended TSC Set, wich adds the TSC Set to the training
sequence code value.
In RSL MODE MODIFY, send Osmocom specific extensions to indicate the TSC
Set and TSC, as well as the VAMOS channel mode; only to OsmoBTS type
cells.
- Set the Channel Mode's Channel Rate to Osmocom specific
RSL_CMOD_CRT_OSMO_TCH_VAMOS_Bm / RSL_CMOD_CRT_OSMO_TCH_VAMOS_Lm
- Add the Osmocom specific Training Sequence IE containing both TSC Set
and TSC.
(These are documented in the Abis manual.)
Implementation:
The internal API to request a Mode Modify is lchan_modify(info). Add to
this info the 'vamos' bool, set to true when the modification should put
the lchan in VAMOS channel mode or not.
When info.vamos == true, make sure the channel mode value is a VAMOS
one: in the copy of info->ch_mode_rate at lchan->modify.ch_mode_rate,
convert to the right VAMOS/non-VAMOS equivalent channel mode.
When the modification is through, set lchan->vamos.enabled
appropriately.
This patch also builds on Ic665125255d7354f5499d10dda1dd866ab243d24
'allow explixit TSC Set and TSC on chan activ / modif / assignment'
placing tsc_set and tsc values in the TSC related IEs.
Related: SYS#5315 OS#4940
Change-Id: Ibf53f4797d7491b17a33946fd7d920f038362b4c
Get rid of this artificial barrier, because Modify with active voice
stream is supported since commit
"lchan and assignment FSMs: make Channel Mode Modify more sane"
d5cb0eb8fd
I4986844f839b1c9672c61d916eb3d33d0042d747
Change-Id: I25f4a881fa32a07f97d7d6e6b812f8afc699d951
Add missing REQUIREMENT_A_TCHF to form a full REQUIREMENT_TCHF_MASK.
That allows detecting TCH/F -> TCH/H upgrades also in the requirement A
flags, where we look for any viable lchan.
Prepares for upcoming patch Id40d1cf8b58410c7d4eb87407fe8b8106e352438
which implements TCH/H to TCH/F upgrades within the same cell.
Related: SYS#5198 SYS#5365
Change-Id: Ic44615b314782423bab0ceef5810311776f92754
Fix build error:
meas_vis.c:196:16: error: 'struct gsm_meas_rep' has no member named 'bs_power'; did you mean 'bs_power_db'?
Output the value in the same format as before the change that introduced
this regression (dB / 2).
We didn't catch this regression with jenkins because meas_vis is only
built if libcdk is installed.
Related: OS#5173
Fixes: d9b7aedb ("change bs_power to bs_power_db")
Change-Id: I9ba9b491ccbde9aa14cfb14ecc551acb2bfd7674
An unintended change in default behavior was introduced in patch:
"allow explixit TSC Set and TSC on chan activ / modif / assignment"
Ic665125255d7354f5499d10dda1dd866ab243d24
c33eb8d569
Set tsc_set and tsc = -1 for all lchan_activate_info and
assignment_request requests to actually yield the default behavior of
selecting the TSC based on the timeslot cfg or the BSIC value.
By setting tsc = 0 implicitly, the patch caused all requests to ask for
tsc 0 instead of calling gsm_ts_tsc().
For a Channel Mode Modify in assignment_fsm, pass the lchan's current
TSC to keep it unchanged.
osmo-ttcn3-hacks Id67a949e0f61ec8123976eb8d336f04510c55c01 adds a test
to verify the expected TSC in all of the activation, assignment and
modify messages. Current osmo-bsc master fails, this patch fixes.
Related: SYS#5315 OS#4940 Ic665125255d7354f5499d10dda1dd866ab243d24
Change-Id: If12df11511fe22ea167782f776736a1a9c484b1f
A side effect is that the final cleanup part of that function is now
always called, also when num_cell == 7.
(Whether we should really clear that logging context at that place is a
different question, out of scope here.)
Change-Id: I71a402a0940857bbedbaf25d293429934706a83c
Instead of calling DEBUGPC() over and over, compose a string using
osmo_strbuf and then log it once.
Rationale:
a) DEBUGPC() is a bad idea for gsmtap_log, because each DEBUGPC()
dispatches a separate gsmtap_log packet, fragmenting the actual log line
in wireshark.
b) DEBUGPC() is a bad idea because it checks the logging categories for
every DEBUGPC() invocation.
c) using a separate function with osmo_strbuf and OTC_SELECT, we can
actually skip the entire string composition in case the DMEAS logging
category is disabled, with a single logging category check.
Change-Id: I4cb607ff43a1cb30408427d99d97c103776b6e69
The RSL BS Power IE in measurement reports is encoded as dB / 2.
Instead of using this coding all over the code, converting to dB and
often printing confusing values in logging etc, store as plain dB.
The conversions should be at the points where a "weird" format is
defined: the RSL encoding needs divided-by-two, so apply it there. The
meas_vis is (now unfortunately) defined as div-two, and so on. But
internally we now just store the plain dB value and calculate with it
without duplicating the wire decoding step everywhere.
Rename to bs_power_db to clarify the unit of the stored value.
Change-Id: I229db1d6bcf532af95aff56b2ad18b5ed9d81616
This fixes handover oscillation in the presence of power reduction on
the downlink: apply the reduced power to the cell's RXLEV in order to
not rate the current cell as weaker than it actually is.
Related: SYS#5339
Change-Id: Ifcf59964b5e2d550d79e4ba14d90962808f79dae
According to 3GPP TS 45.008, the BSS shall monitor the levels of
interference on its IDLE traffic channels. The actual measurements
are performed in the BTS and then reported to the BSC over the
A-bis/RSL link(s) in RF RESource INDication messages.
3GPP TS 45.008 defines the following measurement parameters:
* Intave: Interference Averaging period (see table A.1),
* Interference level Boundaries (see table A.1).
Both parameters are sent to the BTS over the A-bis/OML, and can
now be configured via the VTY interface. Only those BTS models
which 'speak' the OML protocol defined in 3GPP TS 52.021 will
actually get the configured parameters, others will keep using
the hard-coded parameters.
Change-Id: I99ebf57aac1f3ca7e0497c3b4f6b0738c6ed7e47
Related: SYS#5313, OS#1866
This message periodically appears in the logs with subsys=DNM and
level=INFO for every disconnected BTS. I find this message useless
and even annoying, so I propose to remove it in this patch.
Change-Id: I7e2498cc61d311ca08585b2f1c49de021b17a5a1
Without this guard, a command like this can crash osmo-bsc:
OsmoBSC# bts 0 trx 0 timeslot 0 sub-slot 0 activate fr
when timeslot 0 is configured as non-combined 'CCCH'.
Change-Id: I0197a6a2595ff9dade58e37383d44d2df3b03288
CLoses: OS#5170
chan_mode_to_rsl_cmod_spd() may actually return negative on error. To be
able to check for that, handle the returned value as a signed rc before
assigning to the unsigned spd_ind.
Related: SYS#5315 OS#4940 CID#236231
Change-Id: I52e13b24ce67e288ff32dbdaa1c1759089926f5c
Use lchan->modify.tsc in gsm48_lchan_modify().
The TSC is chosen exactly once upon LCHAN_EV_REQUEST_MODE_MODIFY
(lchan_fsm.c), and that should be the only place calling gsm_ts_tsc().
All other mode modify code should just use the final lchan->modify.tsc.
This fixes an error in patch:
Ic665125255d7354f5499d10dda1dd866ab243d24
"allow explixit TSC Set and TSC on chan activ / modif / assignment"
Thanks to coverity for actually detecting this mistake.
Related: SYS#5315 OS#4940 CID#236233
Change-Id: I87ecf7d9266f37f4c775d029e277b614671a9401
This code is available in libosmocore since ~3 years ago
(fdf8b7b1beeb0cda262c5fb060a933aa7edb5e9a). Let's use it instead of
maintaining duplicated code which diverges over time.
Depends: osmo-bsc.git Iae058c35506bc25c9f4790889b89ac46aea664b6
(contains cherry-pick of bug fixed in osmo-bsc.git).
Change-Id: I53ad3067623077b6a8737c2a0aecc8b46bf71a15
lchan->modify.info.ch_mode_rate should remain unchanged, it is the
immutable request data. However, for VAMOS, we will want to
automatically see that the chan_mode is chosen correctly.
As a first step, place a mutable ch_mode_rate copy at
lchan->modify.ch_mode_rate, i.e. not in .modify.info, but in
.modify. Use that everywhere.
This is a non-functional change, preparing for a subsequent patch that
adds handling of VAMOS shadow lchans.
Change-Id: I8a3daac0287f15a59d3688388bb13e55facb2cea
Both VAMOS- and non-VAMOS speech modes should result in indentical voice
handling. So make sure that all chan_modes are converted to non-vamos
before comparing / evaluating in switch statements.
Change-Id: I791e7966b1f8eaa3299a8a46abeb313cf5136e0b
So far we have a couple of macros iterating a specific number of lchans,
depending on dynamic timeslot state etc. With addition of VAMOS lchans,
this would become more complex and bloated.
Instead of separate iteration macros for each situation, only have one
that takes a number of lchans as argument. That allows to more clearly
pick the number of lchans, especially for non-trivial VAMOS scenarios.
Related: SYS#5315 OS#4940
Change-Id: Ib2c6baf73a81ba371143ba5adc912aef6f79238d
Neels Hofmeyr
Pau Espin
Oliver Smith
Vadim Yanitskiy