The CID is sent back to the MSC so it can configure its MGW to send
Osmux frames to the BSC MGW using this CID.
Change-Id: I77dfdd965ae828c39a9818669177aefd22bc02f2
The Osmux CID obtained from the MSC is passed to the co-located BSC MGW
to configure the MSC-side MGW conn of a call leg.
Depends on: osmo-mgw.git I73b4c62baf39050da81d65553cbea07bc51163de
Change-Id: I86e7e13fc7921e3209fb764c0e7797e7ec09b79e
In Change-Id If6d40b2407b87aad2227ea7f15533ef01a3771b3 we introduced
the support for both octet-aligned and bandwidth-efficient mode, and
added a related VTY option about it.
However, we accidentially also changed the default behavior. Without
any explicit configuration, we should behave just like we behaved all
those years before: Continue with octet-aligned mode.
Change-Id: I8b6fd8bec05b35d84ad16275d84f9d363e238d2b
Closes: OS#4002
For AoIP, the AoIP Transport Layer Address IE must be included in the Handover
Request Acknowledge message, so the MSC can send RTP to the right place. Add
this IE for AoIP.
Depends: Ia71542ea37d4fd2c9fb9b40357db7aeb111ec576 (libosmocore)
Depends: Id617265337f09dfb6ddfe111ef5e578cd3dc9f63 (libosmocore)
Change-Id: Ia05e37da125eb6e7b7be9b974b73261bd72de1f4
Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is
done establishing. For AoIP, the local RTP address towards the MSC already
needs to be known before the Handover Request Acknowledge is sent, so the AoIP
Transport Layer Address IE can be included. This patch only modifies the
handover FSM, a subsequent patch adds the IE.
Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
To support the 3 possible preferences, the changes needed were:
- Replace 'full_rate' bool with a 3 option enum to represent
the channels types for signalling
- Switch from _pref/_alt to using an array sorted in preference
order
Originally merged as Change-Id I4c7499c8c866ea3ff7b1327edb3615d003d927d3,
reverted because the change broke voice calls. Re-submitting with the fix:
don't forget to set conn->assignment.requires_voice_stream.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Change-Id: I7513d2cbe8b695ba6f031ad11560c63a6535cf2d
osmo-mgw.git also includes fixes of the MGW endpoint FSM, for example
I92a9944acc96398acd6649f9c3c5badec5dd6dcc.
Depends: I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw)
Change-Id: I03e6b48d9b0a5370310d5f56809259ff7909cf9d
Move the T_defs API to libosmocore as osmo_tdefs: remove the local T_defs API
and use libosmocore's osmo_tdef* API instead.
The root reason is moving the mgw_endpoint_fsm to libosmo-mgcp-client to be
able to use it in osmo-msc for inter-MSC handover.
When adding osmo_tdef, the new concept of timer groups was added to the API. It
would make sense to apply group names here as well, but do not modify the VTY
configuration for timers. The future might bring separate groups (or not).
Depends: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 (libosmocore)
Change-Id: I66674a5d8403d820038762888c846bae10ceac58
This reverts commit 94c9324fe0.
Multiple ttcn3 handover tests were broken due to this commit. Let's
merge this once all the other commits pertaining to that fix can be
merged as well.
Fixes: OS#3942
Change-Id: I01d93778fb19c601c21f99ec4d2a3ab8a4a48f67
This variable does not seem to be used anywere in OsmoBSC, seems to be a
remnant from OpenBSC times.
Change-Id: I5e4aa352fa5f16f6ff64738f25afd1a844fa4fcb
Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is
done establishing. For AoIP, the local RTP address towards the MSC already
needs to be known before the Handover Request Acknowledge is sent, so the AoIP
Transport Layer Address IE can be included. This patch only modifies the
handover FSM, a subsequent patch adds the IE.
Change-Id: I4a5acdb2d4a0b947cc0c62067a67be88a3d467ff
During inter-BSC-incoming, the MSC sends the chosen encryption algorithm in the
Handover Request message. Actually parse this Chosen Encryption Algorithm IE.
Place the chosen algorithm and the CK into lchan_activate_info->encr so that
the new lchan will use the same ciphering on this new BSS as it did on the old
BSS.
Change-Id: I5b269f50bd2092516bfdf87746196983d3ac49d1
For intra-BSC handover, the previous encryption is copied from the old lchan,
which of course is not available during inter-BSC handover. Hence the lchan
activation info needs to include an explicit encryption information, and we
must not rely on the presence of the previous lchan to copy encryption
information from.
Add struct lchan_activate_info.encr to allow passing encryption info through
lchan_activate() without requiring a previous struct gsm_lchan to be present.
Instead of copying from the old lchan, always copy encryption info to
lchan_activate_info, and during activation, just before sending the Channel
Activation, copy the lchan_activate_info.encr to the new lchan.
This prepares for upcoming I5b269f50bd2092516bfdf87746196983d3ac49d1 which
obtains the encryption information from an intra-BSC-incoming Handover Request
message.
Related: OS#3842
Related: I5b269f50bd2092516bfdf87746196983d3ac49d1
Change-Id: Ib3d259a5711add65ab7298bfa3977855a17a1642
Instead of counting digits and slashes of the IPA Unit ID manually,
use POSIX regex functions, so the code is easier to maintain and
read. As a bonus, this fixes CID#188854: variable 'remain_slash'
was of type 'uint8_t', so it could never be lower than zero.
Change-Id: Id613bf650833dd38eaad08fdfffdf8dbe2f002b1
Related: CID#188854 Unsigned integer overflow
The 'return' that makes Coverity angry can be safely replaced by 'break'.
Change-Id: Ib3d7519421319fb0e6d65441bba123b7b01f4556
Fixes: CID#188873 Identical code for different branches
Fixes: CID#188850 Identical code for different branches
Fixes: CID#188845 Identical code for different branches
We don't need to know position of matches: just yes or no.
This change would save some computation power.
Change-Id: Ia8414bf83d030adfae806c0aeaa757bc4c8cda2b
At the moment the length field of the bssmap header is not parsed.
Instead the length is computed out of the known header length and the
number of bytes received. This is prone to error, lets make sure that
extranous data at the end of a message is ignored by parsing the bssmap
length correctly.
Change-Id: Idef2e783d2377a2ad1f697ea4d26491a32b3e549
Related: OS#3806
With the FORGET_MGW_ENDPOINT event, the MGW endpoint FSM notifies the gscon
that it has deallocated and that hence the gscon should forget all references
to it (to avoid a use-after-free).
Also do this for the endpoint FSM and endpoint ci pointers in the conn->ho.*
sub struct.
I saw a use-after-free after a Handover Failure message tears down the lchan
and MGW endpoint before triggering the handover_fsm.c cleanup code, which also
tries to clean up an endpoint CI if it was created for the failed Handover.
Change-Id: I6702ccd0df44bea5eb8b26d471d7903c24e6e30b
The symbol GSM0808_SC_CFG_AMR_4_75_5_90_7_40_12_20 is used in
lchan_fsm.c, but gsm_08_08.h, where the symbol is declared is not
included.
Change-Id: I46f910b3e0f2c7d8c78c1681acef30b9419e39f0
MGCP/SDP provides fmtp parameters in order to signal which of the two
available AMR framing modes (octet-aligned or bandwith-efficient) should
be used on the link between BSS and core network. osmo-bsc currently
does not set up this mode which means that the RTP packets from the BTS
are forwared without inspection/modification, which may lead to
malfunction when a BTS is using a framing mode that is not supported by
the other end.
- Add VTY option to setup the framing mode
- Generate related fmtp parameters in SDP
Depends: osmo-mgw I622c01874b25f5049d4f59eb8157e0ea3cbe16ba
Change-Id: If6d40b2407b87aad2227ea7f15533ef01a3771b3
Related OS#3807
Before this patch, all OML GET ATTRIBUTES messages were encoded with
an erroneous OML header length value. The length value was always three
bytes less than the actual message length. This patch fixes the
problem.
Change-Id: I56068de0bb14a99ec39be587e542e27cddb7d1df
Closes: OS#3799
When "Config-NB-Code = 1" is set via the S-bits, then the resulting
multirate configuration IE will contain 12.2K. Since the generator
function is not aware if the lchan is activated for HR or FR it sets the
flag for 12.2k always.
We have to add a check here in order to set the 12.2k flag in the IE
back to 0 so that the active set contains a set of useable rates.
Change-Id: I40e7f568f4822040a2d1e78f22dbba0e49d0167e
Related: SYS#4470
When gsm48_mr_cfg_from_gsm0808_sc_cfg() is used to generate the AMR
multirate configuration IE, make sure that lchan allocation fails in
cases where the multirate configuration IE can not be generated.
Change-Id: Icd3e5674b10b8ae223c0d13ae33fc9ae7e8a8a18
Depends: libosmocore I6fd7f4073b84093742c322752f2fd878d1071e15
Related: SYS#4470
When match_codec_pref() is called and the codec selections from the
ASSIGNMENT COMMAND are matched against the interal capabilities, the
configurations are checked one by one. When a match is found that match
is returned.
However, the implementation currently does not check the AMR S15-S0 bits
when the actual matching happens. This is done afterwards in case AMR
gets picked. Unfortunately if the MSC implementation is not obeying the
settings the MSC has previously communicated in the L3 COMPL message we
may end up with an S15-S0 configuration that has all rate selection
(which eventually end up as active set in RSL) bits set to zero. This is
an invalid configuration and should be prevented. Also the handling of
the S15-S0 bits should happen as part of the matching so that there is a
chance to try the nect codec in the list if AMR is unuseable.
Also S15-S0 has one special setting "Config-NB-Code = 1" (S1 = 1). When
this bit is set, the four (in HR only three) most common rates are
selected into the active set. If there are also other S-bits set besides
S1 we should prefer S1 and discard the other bits.
- Perform handling of S15-S0 while matching
- If S1 is set, prefer this setting and discard all other settings
Change-Id: Ie52376b51fe07ed07056e8df2e9557293ff67a78
Related: SYS#4470
The current configuration for permitted AMR rates on BTS level has been
choosen arbitrarily. Lets choose the possible rates so that they match the
"Config-NB-Code = 1" as defined in 3GPP TS 28.062 Table 7.11.3.1.3-2.
(The current default behavior is not changed since the MSC level
configuration only permits 5.90k by default.)
Change-Id: I916953e3fdb54168671dd13b359e78662fa31059
Related: SYS#4470
This commit breaks voice channel assignment. It results in the
Assignment Complete sent to the MSC for a voice lchan lacking
AoIP Transport Layer Address, Speech Version and Speech Codec.
Hence the MSC cannot complete the Assignment for a voice call.
Let's revisit this patch, test thoroughly and re-merge later.
This reverts commit 4d3a21269b.
Reason for revert: <INSERT REASONING HERE>
Change-Id: I72aaa03539919e7e85b5b75b133326cec5e68bc9
This commit aims at better ordering of content in order to get rid of
sigtran stuff in gsm_data. This way we can avoid requiring
libosmo-sigtran when building ipaccess utils.
Change-Id: I8941f059d6e4eb21a971d48d2b66c29ec3355a6d
To support the 3 possible preferences, the changes needed were:
- Replace 'full_rate' bool with a 3 option enum to represent
the channels types for signalling
- Switch from _pref/_alt to using an array sorted in preference
order
Change-Id: I4c7499c8c866ea3ff7b1327edb3615d003d927d3
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>