The struct member struct bsc_msc_data->is_authenticated is set to true
permanently. This is a leftover from the sccplite implementation and can
be removed now.
Change-Id: I966a48b383c85345c92c9a1fec791150e96cd7b9
Related: OS#3112
Old osmo-bsc-sccplite already supported this, but in the migration
over to libosmo-sigtran and to real 3GPP AoIP, this functionality
got lost.
We now create a UDP proxy socket. Any MGCP commands received via IPA
from MSC (or rather: bsc_nat) are retransmitted to the MGW via UDP on
this socket. Any responses back from the MGW received on the UDP
socket are retransmitted back to MSC/bsc_nat as MGCP inside the IPA
multiplex.
Closes: OS#2536
Change-Id: I38ad8fa645c08900e0e1f1b4b96136bc6d96b3ab
Having the helper makes it easier to read/find for transport type checks. It
will be ifurther re-used in forthcoming commits.
Change-Id: Ic0ee4c472e29ec3092049e5e23b744395613616d
MGCP/SDP provides fmtp parameters in order to signal which of the two
available AMR framing modes (octet-aligned or bandwith-efficient) should
be used on the link between BSS and core network. osmo-bsc currently
does not set up this mode which means that the RTP packets from the BTS
are forwared without inspection/modification, which may lead to
malfunction when a BTS is using a framing mode that is not supported by
the other end.
- Add VTY option to setup the framing mode
- Generate related fmtp parameters in SDP
Depends: osmo-mgw I622c01874b25f5049d4f59eb8157e0ea3cbe16ba
Change-Id: If6d40b2407b87aad2227ea7f15533ef01a3771b3
Related OS#3807
This commit aims at better ordering of content in order to get rid of
sigtran stuff in gsm_data. This way we can avoid requiring
libosmo-sigtran when building ipaccess utils.
Change-Id: I8941f059d6e4eb21a971d48d2b66c29ec3355a6d
Add LCLS variant where the loop is closed on BTS level instead of
MGW. The main difference is the handling of connection-related
messages (we use IPA RSL instead of MGCP), the configuration and
correlation logic remains the same.
Change-Id: I7e8379f31037f2c48da69a01919701919a3066a2
Related: OS#3659
Use libosmo-mgcp-client's new X-Osmo-IGN header to indicate that CallIDs are
allowed to mismatch.
Add VTY commands 'msc' / 'mgw x-osmo-ign call-id' and 'no mgw x-osmo-ign' to
switch this behavior explicitly.
For SCCPlite MSCs, unless a specific config was issued, always send
'X-Osmo-IGN: C' by default, to ignore CallID mismatches.
Depends: Id7ae275ffde8ea9389270cfe3db087ee8db00b51 (osmo-mgw)
Change-Id: I257ad574d8060fef19afce9798bd8a5a7f8c99fe
It is theoretically possible to LCLS two legs that use different
codecs. However, this requires transcoding capabilities on the
local MGW. If the local MGW lacks transcoding features such a
local circuit should be avoided. Enabeling LCLS under such
coditions should be optional (VTY)
- Add check to avoid LCLS on different codec/rate
- Add VTY-Option to optionally override the check
(MGW is able to transcode)
Change-Id: I157549129a40c64364dc126f67195759e5f1d60f
Related: OS#1602
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
The user might not want to enable LCLS support for administrative
reasons. So let's keep it disabled by default, until somebody
explicitly enables it with "lcls-mode mgw-loop".
In the future, we may want to introduce a "lcls-mode bts-loop" where we
don't loop at the BSC-colocated MGW, but where we instruct the BTSs to
feed the RTP directly to each other. This would require a
falt/transparent IP routing between the BTSs in the RAN.
Change-Id: Ied7985056c8cd182bf16119007a08cc5be14459b
Related: OS#1602
The bsc_msc_connection dates back to the old pre-libosmo-sigtran
days, and 90% of the field members weren't used at all (even the
new sigtran specific ones!). Let's merge what remains into struct
bsc_msc_data.
As a side effect, the already dysfunctional "dest A.B.C.D" VTY
command has been removed from the MSC node.
There's quite a bit of fall-out in the CTRL interface, which was
the code with strongest ties to bsc_msc_connection. This was
resolved by properly porting CTRL handling over to libosmo-sigtran,
meaning that an IPA/SCCPlite connected MSC can now again send CTRL
GET/SET commands, and can also receive those selective few TRAPs
that old osmo-bsc-sccplite also sent to its MSC[s].
Change-Id: I6b7354f3b23a26bb4eab12213ca3d3b614c8154f
Related: OS#2012
Also: Move mgcp_timeslot_to_port() next to it, as they are
more or less the inverse transformation of each other.
Change-Id: Ica908e2bb8fc4e59e0d146b428c93a9efc385688
We used to have hard-coded M3UA. Let's allow the user to configure
this per MSC using a new "asp-protocol (m3ua|sua|ipa)" VTY command.
For SUA this should just work 1:1 without any trouble. For IPA,
this of course only changes the underlying transport without reflecting
the various differences in terms of BSSMAP ASSIGNMENT, MGCP handling,
etc.
Change-Id: I0800c709e574cedd7f5dd98be81c78782245cd13
Related: OS#2544
The function a_reset_free() is not used anywhere at the code. The
reason for this is that a BSC instance is never cleared once it
is started up. Also the timer number is not according to the spec.
- Remove a_reset_free()
- Fix timer identification number (T4)
- use fi->priv to hold context info
- Fix sourcecode formatting
Change-Id: I72095d52304c520e383755eee6c889bce492cbd4
Related: OS#3102
There is a lot of dead code in osmo_bsc_msc.c that used to handle
the IPA multiplexed SSCP lite A interface.
- remove portions of the dead code
- remove IPA Ping related VTY commands
Change-Id: I5cf3fec31cc774c902f3cfe6d16fb85ef301694a
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
The changes to abis_test and gsm0408_test show that this code now handles
3-digit MNC correctly, by not dropping the leading zero as 0xf in the encoded
PLMN.
Re-implement CTRL commands 'mcc', 'mnc' and 'mcc-mnc-apply' to preserve the
presence of the third digit of the MNC. Always reply with all leading zeros.
Adjust the expected results in ctrl_test_runner.py, to show that it works.
In VTY and CTRL, the parsing of MCC and MNC is inherently made stricter by use
of osmo_{mcc,mnc}_from_str() -- they will no longer allow surplus characters
and detect errno returned by strtol() (in contrast to atoi()).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore),
I020a4f11791c61742a3d795f782805f7b7e8733e (libosmocore)
Change-Id: I8e722103344186fde118b26d8353db95a4581daa
Philipp Maier
Harald Welte
Pau Espin
Max