"enum lchan_select_reason" gets a new selection reason: "SELECT_FOR_VGCS"
The selection "direction" can also be changed via VTY.
Change-Id: I6b96d0a1df68efa5858b98297ebe0944b1473aaf
Related: OS#4852
"struct lchan_activate_info" is expanded to support flags for VGCS and
VBS. These are used to send the correct Channel Mode to the BTS.
"enum lchan_activate_for" is expanded to indicate and activation of
VGCS/VBS calls.
Change-Id: Ic0c0597d149d0758d6766937d99660fa02e0e139
Related: OS#4852
This message will be sent to each BTS with a VGCS/VBS channel to notify
the served MSs about ongoing group/broadcast calls. It is also used to
remove the notification, if the call is terminated.
Change-Id: I96ec0ee5d1a772a45f1ebfd64210718c8bf5aa58
Related: OS#4852
Do not build these utils implicitly if libsqlite3/libpcap/libcdk are
installed. Add configure flags for explicit building and fail if
dependencies are missing.
Keep behavior in deb and rpm packaging:
* deb: build meas_vis
* rpm: build none of these (libcdk dependency for meas_vis is not
available in most rpm-based distributions we build for)
Fixes: OS#5173
Depends: docker-playground I015b6d7cb834e99ea5d04206ba5f8c519c4e6af1
Change-Id: I8b3d5efb769437a5d3036e1e627b8d477275d93e
The set of values in seconds which can be expressed in the 3-bit field
DRX_TIMER_MAX (0s, 1s, 2s, 4s,...64s) don't include the "3s" that where
being specified. Instead, libosmocore's encode_drx_timer() was
taking both upper boundary "4s" and encoding it "0b011".
Hence, better write the value actually being transmitted to MS, to avoid
users/readers confusion.
More related info can be found on TS 44.060 Table 12.24.2 and TS 45.002
6.5.6.
Related: OS#6097
Change-Id: Ibf01a50b258e197ba5e3173492513349ddffdb38
Back in Change-Id Iefde0af44a663f22462a54d68a58caa560eceb2f I
introduced indication of the NCH position in the SI1 rest octets.
However, a related ERROR messages is accidentially also printed in
case no NCH is configured at all.
Let's split the already overly-complex if clause into a separate
function which then also handles the "bts->nch.num_blocks == 0"
case as permitted.
Change-Id: Iab2120a343cb0f6553f13a821b44b3c312587579
Related: OS#5781
The message PCU_IF_MSG_DATA_CNF_DT uses SAPI PCU_IF_SAPI_PCH, which is
formally not correct. It should use SAPI PCU_IF_SAPI_PCH_DT
Depends: osmo-pcu.git I0883b51fc232ec0267f1511c3a37c0bcd0967a08
Change-Id: Id5c799e625c56e57f7b51cd4fb57f5bea9c973d2
The nanoBTS feature reporting works significantly different from what
osmo-bts implements. They have a "Supported Features" IE in potentially
each of their MOs, and within this have nested IEs expressing respective
feature sets.
Let's start by requesting those for at least those MOs where we already
implement a GET ATTRIBUTES call in the FSM.
Change-Id: I15116044fb354ec0a0682c62078fbfa907b318f3
There is no such option in the configure.ac:
configure: WARNING: unrecognized options: --enable-vty-tests
Change-Id: I04421af0b250651a598a7aeb5bed55dbacec2f7c
This adds the vty commands and respective logic to allow the user to
specify the NCH (notification channel) position in the SI1 rests octets.
Change-Id: Iefde0af44a663f22462a54d68a58caa560eceb2f
Related: OS#5781
Requires: libosmocore.git I24a0095ac6eee0197f9d9ef9895c7795df6cdc49
cat-testlogs.sh does "exit 1", so no workspace.tar.xz is created.
Call this script after archiving the workspace.
Change-Id: Ibcb842f32418e66a186d6b21bb5861cf4a0b7c4a
Fixes: d33a66b779 "contrib/jenkins: create workspace.tar.xz on error"
Related: OS#5665
The PCUIF interface implementation in osmo-bsc provides two ways to
access the paging channel (PCH).
1) Under the SAPI PCU_IF_SAPI_PCH PAGING COMMAND messages are accepted
as whole MAC block but the format is in the style that we are going
to deprecate with PCUIF v.11. Also at the moment those PAGING COMMANDs
are not confirmed towards the PCU. This is also not necessary since
osmo-pcu would silently drop such confirmations. (see pcu_rx_data_cnf
in pcu_l1_if.cpp)
2) Under the SAPI PCU_IF_SAPI_PCH_DT messages are also accepded as
MAC blocks but the SAPI will only accept IMMEDIATE ASSIGNMENT messages.
The messages are encapsulated in a struct that holds IMSI (paging group)
and TLLI (used for confirmation) as separate struct members. The
messages are also confirmed towards the PCU as it should be.
Since we want to depreacete the older V.10 version of PCUIF and there is
not much benefit in maintaining two interfaces we should use
SAPI PCU_IF_SAPI_PCH_DT for both message types. This also requires small
adjustments to osmo-pcu (see Depends).
Depends: osmo-pcu.git I99cfe373fa157cfb32b74c113ad9935347653a71
Related: OS#5927
Change-Id: I82443f2b402aa2416469c8c50b1c050323ef3b8f
In order to figure out why we sometimes get a coredump in the jenkins
master jobs, add a quick hack to get all relevant binaries on libraries
on error.
Related: OS#5665
Change-Id: I1439c06316edbe11f162c14774c2d507152b97a7
Don't explicitly mention ip.access/nanoBTS if we actually want to refer
to all BTSs implementing an IPA-style Abis/IP interface.
Also, remove some bogus "is_ipa_abisip_bts(bts) || is_osmobts(bts)".
is_ipa_abisip_bts includes osmobts.
Change-Id: I31696d9a21a799511741a561085686cfa0728f93
This function is used to check if the BTS is using the IPA Abis-IP
transport, and not whether its manufacturer/vendor is ip.access.
Let's use a less confusing name.
Change-Id: I202c58341c1536489064d2671c0842c6f70b5429
The Manufacturer ID IE is normally used to indicate the [name of] the
manufacturer. In case of ip.access nanoBTS it is, for example, "com.ipaccess".
Osmocom decided to re-pupose this IE to indicate bts-specific feature
flags. Stop interpreting the string "com.ipaccess" as feature bitmap.
In fact, nanoBTS doesn't support runtime reporting of features (at
least not in this way), so let's mark features_get_reported = false,
resulting in the copy of bts_model->features to bts->features at the
time a BTS is initialized.
Change-Id: I76cee190dc1f074464df570cdfc3d38559f04846
Closes: OS#5959
Andreas Eversberg
Vadim Yanitskiy
Oliver Smith
Pau Espin
Harald Welte
Philipp Maier
Daniel Willmann