1887f9d153
Introduce gsm_lchans_name() for human readable lchan state name
...
Also, use this new function to dump lchan state on VTY and to
improve readability of RSL log messages.
2009-12-29 10:53:25 +01:00
8e93b7908f
RSL: Introduce LCHAN_S_REL_REQ state
...
This state will help us to differentiate between channels where we have
requested the release, and channels that are actually released.
2009-12-29 10:53:25 +01:00
ebdcee27b8
[ipaccess] Start reading the header entry
...
* Read the entry and print it out
2009-12-29 08:38:12 +01:00
07a4026b38
[ipaccess] Start figuring out what the header entry is meaning..
2009-12-29 08:38:12 +01:00
c823c89c76
[ipaccess] Use the u_intX_t types in the firmware tool
2009-12-29 08:38:12 +01:00
567b3261d9
[ipaccess] Attempt to read the header entries..
2009-12-29 08:38:12 +01:00
46a920c36c
[ipaccess] Do not pick in the wrong headers...
...
I must have picked in the wrong section of these
files... There are some kind of header entries
that are all 138 byte long and this is the total
length...
2009-12-29 08:38:12 +01:00
615e650fd4
[wireshark] Add config option to decide which flavor of OML to use
...
This option can currently toggle between BS11 and nanoBTS (in the
form of having BS11 default). The next step will be to make use of
this in the code.
2009-12-29 04:22:12 +01:00
304db15bd4
[wireshark] Decode NM_ATT_IPACC_FILE_DATA as TL16V
...
This can be decoded like the plain FILE_DATA and I don't
understand the need for a custom version.
2009-12-29 04:21:22 +01:00
0b864db429
[ipaccess] Send a NVATTR to activate the new software after load end
...
* The struct is similiar to the one in abis_nm..
* The generation of the data is similiar to sw_end_load and sw_init_load
and we should unite this..
2009-12-28 16:40:44 +01:00
c7aabcad1b
[ipaccess] Handle LoadAbort coming from the BTS.
...
* Be bale to abort the load when the BTS is rejecting the file..
2009-12-28 16:40:44 +01:00
66169152f6
vty: replace'logging level' numeric value with human readable string
2009-12-28 13:42:55 +01:00
7b37d9710d
set the TRX nominal power by default and/or VTY
2009-12-28 13:42:47 +01:00
19ef62a0a5
Introduce and use gsm_lchan_name() in addition to gsm_ts_name()
...
In many cases we actually want a name / unique ID for the lchan,
not just for the on-air timeslot... especially in SDCCH/8 case,
where 8 SDCCHs share one timeslot...
2009-12-28 13:42:33 +01:00
9538efc8a7
RLL: print human-readable value of RLM CAUSE in ERROR IND
2009-12-28 13:42:03 +01:00
3e46031f52
Introduce new ACT_REQ state to prevent race condition during channel allocation
...
When we allocate a channel, we send the RSL CHAN ACT REQ and wait until we get
a CHAN ACT ACK. Only the ACK will change the state, so there is a race where
we allocate that same channel to a different channel request before we get
the ACT ACK.
Introducing a new ACT_REQ state resolves this issue.
2009-12-28 13:41:16 +01:00
ccd8845449
rename gsm_lchan_name() to gsm_lchant_name()
2009-12-28 13:41:06 +01:00
2f5df85c26
fix segfault in CHAN RQD log message
2009-12-28 13:40:39 +01:00
91b603db57
correctly print chan act nack error
2009-12-28 13:40:32 +01:00
28f1d37380
print TS name when out of resources during CHAN RQD
2009-12-28 13:40:12 +01:00
9fcf6d78b7
correction of RTP timestamps is a NOTICE event, not debug
2009-12-28 13:38:23 +01:00
b29b57a198
include BTS and TRX number in TRX overload message report
2009-12-28 13:38:18 +01:00
8f31a8fdae
[abis] Set rc to 0 to avoid running into a warning about unknown states
...
When we have received the End Ack we are just doing nothing as we
are done. This means rc remains -1 and we will print a warning but
there is no need to have a warning...
2009-12-28 11:48:12 +01:00
326a632c46
[ipacess] Implement sw_load_end for the nanoBTS
...
* This should be shared with the sw_load_init routines
as it is the about the same.
2009-12-28 11:45:43 +01:00
c5dc0f7ac7
[ipaccess] Properly increment the segs_in_window
...
Somehow this should be done in the fill method..
2009-12-28 11:28:51 +01:00
5a2291e96a
[ipaccess] No need to use fdopen for the file (that was leaked too)
2009-12-28 10:23:56 +01:00
71bc11e757
[ipaccess] Implement the Load Segment messages...
2009-12-28 10:04:26 +01:00
64d9ddde5d
[abis] Warn if sw_load_segment is not implemented for the given bts type
2009-12-28 09:21:18 +01:00
cf269a7f85
[ipaccess] Send the correct Software Load Init for the ipaccess BTS
...
* The FOM header needs to be different. We need to address the
base station transceiver, bts, trx set to 0 and ts to 255
* We need to transfer the the \0 of 'id' and 'version'
* We need to issue a NM_ATT_SW_DESCR (just the value)
* We need to use 16bit length for the other two ids..
* After this our Software Load Init is getting an Ack.
2009-12-28 09:05:16 +01:00
a6faea83e0
[ipaccess] Verify the SDP header before flashing
...
Print a big fat warning that we do not carefully check the
firmware as the format is not known and that flashing could
be dangerous..
2009-12-28 09:05:16 +01:00
ab2c8b109d
[ipaccess] Start flashing once the BTS has started enough...
...
Strictly speaking we would only need to start the Site Manager
and could probably start flashing afterwards but it is more easy
to have one config path...
2009-12-28 09:05:16 +01:00
f413a0811a
[ipaccess] Add firmware download option to ipaccess-config
...
This will mostly work like the downloading in bs11_config
and is based on the bs11_config state machine as well. Once
it is working we can see how to unite both implementations.
2009-12-28 09:05:15 +01:00
30b9ecda33
[ipaccess] Verify the size part of the header
2009-12-27 14:07:40 +01:00
a25b20c174
[ipaccess] Call it ipaccess-firmware
2009-12-27 14:07:40 +01:00
Harald Welte
f6f2ef9d24
move get_string_value() und get_value_string() into debug.c
...
this makes bsc_mgcp and ipaccess-proxy compile again
2009-12-27 11:24:55 +01:00
Sylvain Munaut
258e2f9a9c
gsm_04_11: Support for implicit CP-ACK in case of multi-SMS
...
See GSM 04.11 Chapter 5.4 for details. The idea is that when
multi-SMS are mobile originated, it's possible the CP-ACK of
the previous transaction to be lost and the reception of a
new CP-DATA for a new transaction should close previous transaction
"as-if" we had received the CP-ACK ...
Note that testing is hard since it's an exceptional condition that's
hard to create. I tested by temporarly disabling CP-ACK processing
and checked it worked as expected.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2009-12-27 01:09:41 +01:00
73b82bbf92
print TS name in RLL ERR IND
2009-12-26 22:48:25 +01:00
fc05750cd8
[rsl] correctly print handover detect and connection fail
2009-12-26 22:48:21 +01:00
198d5ad6f4
print LAC and BTS number when showing location update reject
2009-12-26 22:48:16 +01:00
93c6284772
fix missing space in log message
2009-12-26 22:48:12 +01:00
b79bdd99e5
[debug] add new 'logging level' command to set loglevel more user friendly
2009-12-26 22:48:09 +01:00
47df39931c
generate INFO events for CC SETUP and LOC UPD REJ
2009-12-26 22:48:00 +01:00
240ce88185
add 'get_string_value()' as inverse function of 'get_value_string()'
2009-12-26 22:47:55 +01:00
441e483bd4
[db] A new subscriber is an INFO event, not NOTICE
2009-12-26 22:47:48 +01:00
1f3ecd4050
'classmark1' is not an integer field in the database
2009-12-26 22:47:43 +01:00
6589858167
[meas rep] fix parsing of BSIC in third reported neighbor cell
2009-12-26 22:47:33 +01:00
Harald Welte
7c639a05a3
[handover] print INFO message when doing handover
2009-12-26 00:29:18 +01:00
Harald Welte
303e5e0314
[meas rep] print the neighbor index when debugp'ing a neigh cell meas
2009-12-26 00:29:05 +01:00
Harald Welte
eaa95d545e
fix off-by-one error when mapping from meas rep to neighbor cell
2009-12-26 00:28:45 +01:00
Harald Welte
950eca9b76
[meas_rep] Add raw neighbor index into per-cell parsed meas rep
2009-12-26 00:28:37 +01:00
Harald Welte
Harald Welte
Sylvain Munaut