cellular-infrastructure
/
osmo-bsc
mirror of https://gerrit.osmocom.org/osmo-bsc
9
0
Fork 0
Code Issues Releases Wiki Activity
osmo-bsc/src/osmo-bsc/handover_fsm.c

1598 lines
52 KiB
C
Raw Normal View History

large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
/* Handover FSM implementation for intra-BSC and inter-BSC Handover.
*
* (C) 2018 by sysmocom - s.f.m.c. GmbH <info@sysmocom.de>
* All Rights Reserved
*
* Author: Neels Hofmeyr <neels@hofmeyr.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include <osmocom/core/socket.h>
#include <osmocom/gsm/rsl.h>
#include <osmocom/gsm/gsm0808.h>
move mgw endpoint FSM to osmo-mgw.git osmo-mgw.git also includes fixes of the MGW endpoint FSM, for example I92a9944acc96398acd6649f9c3c5badec5dd6dcc. Depends: I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I03e6b48d9b0a5370310d5f56809259ff7909cf9d
2019-04-23 16:37:37 +00:00
#include <osmocom/mgcp_client/mgcp_client_endpoint_fsm.h>
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
#include <osmocom/bsc/debug.h>
#include <osmocom/bsc/bsc_subscriber.h>
#include <osmocom/bsc/handover_fsm.h>
neighbor config: allow re-using ARFCN+BSIC pairs Fix neighbor config to match OsmoBSC manual: implement the plan for neighbor configuration that was so far only described in the manual without actually being in operation. This first allows re-using ARFCN+BSIC pairs in and across BSS. So far the handover_start() code always looked for handover target cells across *all* local cells, even if they were not listed as neighbors to a source cell. Imply all cells as neighbors only as long as there are no explicit neighbors configured. As soon as the first 'neighbor' line appears in a 'bts' config, only the listed neighbors are regarded as handover target cells. (The 'neighbor-list' commands are not related to this, only the relatively new 'neighbor (bts|lac|cgi|...)' commands affect actual handover procedures.) TTCN3 tests TC_ho_neighbor_config_1 thru _7 play through the various aspects of neighbor configuration: both the legacy implicit all-cells-are-neighbors as well as allowing only explicit neighbors by config. Related: OS#4056 Related: osmo-ttcn3-hacks Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc Change-Id: I29bca59ab232eddc74e0d4698efb9c9992443983
2019-07-12 23:12:53 +00:00
#include <osmocom/bsc/handover_cfg.h>
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
#include <osmocom/bsc/bsc_subscr_conn_fsm.h>
#include <osmocom/bsc/lchan_select.h>
#include <osmocom/bsc/lchan_fsm.h>
lchan_fsm: split off lchan_rtp_fsm, establish RTP a bit earlier Change-Id: Id7a4407d9b63be05ce63f5f2768b7d7e3d5c86fb
2018-07-12 19:23:26 +00:00
#include <osmocom/bsc/lchan_rtp_fsm.h>
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
#include <osmocom/bsc/gsm_04_08_rr.h>
#include <osmocom/bsc/abis_rsl.h>
#include <osmocom/bsc/bsc_msc_data.h>
#include <osmocom/bsc/osmo_bsc.h>
#include <osmocom/bsc/osmo_bsc_lcls.h>
#include <osmocom/bsc/codec_pref.h>
handover_fsm: adjust inter-BSC HO failure handling to spec Inter-BSC outgoing lacked the required BSSMAP HO Failure dispatch. Not all cases should send BSSMAP HO Failure, name the relevant spec paragraphs in comments and adjust handling. Related: osmo-ttcn3-hacks If772dbbc5f9790d3f911465e1303dd0a99811154 Change-Id: I0980cacb9713e41a1eef3a0a7f6cc892e8a20da5
2018-10-09 23:50:31 +00:00
#include <osmocom/bsc/gsm_08_08.h>
Move struct gsm_bts: gsm_data.* => bts.* Place all code related to the object into the related file. Having all the data model in one file made sense in early stage of development to make progress quickly, but nowadays it hurts more than helps, due to constantly growing size and more and more bits being added to the model, gaining in complexity. Currently, having lots of different objects mixed up in gsm_data.h is a hole of despair, where nobody can make any sense were to properly put new stuff in, ending up with functions related to same object in different files or with wrong prefixes, declarations of non-existing functions, etc. because people cannot make up their mind on strict relation to objects in the data model. Splitting them in files really helps finding code operating on a specific object and helping with logically splitting in the future. Change-Id: I00c15f5285b5c1a0109279b7ab192d5467a04ece
2020-07-15 18:53:16 +00:00
#include <osmocom/bsc/bts.h>
LCS: implement the bulk of Location Services Depends: I4d7302a4853518916b6b425e710c10568eb2ffe5 (libosmocore) Change-Id: I28314ba97df86a118497e9b2770e2e6e2484e872
2020-09-17 15:54:39 +00:00
#include <osmocom/bsc/lcs_loc_req.h>
move BSC level stats and rate counters to new bsc_stats.[hc] Instead of having static const structs in header files (which end up duplicated in each and every compile unit!), have one .c file with the rate_ctr and stat_item descriptions. Related: SYS#5542 Change-Id: I8fd6380b5ae8ed2d3347e7cfbf674c30b6841ed9
2021-08-29 11:18:40 +00:00
#include <osmocom/bsc/bsc_stats.h>
split lchan specific defines and code to its own file It is really difficult right now to find out where all the different stuff relative to operation and lifecycle of an lchan is. Let's move everything to its own file to have all the related defines and logic together. Change-Id: Idd855d126c43ac6576c5f3ba7e0b8014127a65e1
2022-08-08 13:03:41 +00:00
#include <osmocom/bsc/lchan.h>
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
#define LOG_FMT_BTS "bts %u lac-ci %u-%u arfcn-bsic %d-%d"
#define LOG_ARGS_BTS(bts) \
(bts) ? (bts)->nr : 0, \
(bts) ? (bts)->location_area_code : 0, \
(bts) ? (bts)->cell_identity : 0, \
(bts) ? (bts)->c0->arfcn : 0, \
(bts) ? (bts)->bsic : 0
#define LOG_FMT_FROM_LCHAN "%u-%u-%u-%s-%u-%s"
#define LOG_ARGS_FROM_LCHAN(lchan) \
lchan ? lchan->ts->trx->bts->nr : 0, \
lchan ? lchan->ts->trx->nr : 0, \
lchan ? lchan->ts->nr : 0, \
Use libosmocore available API to get value_list This API has been available since 1.0.0, and we actually require libosmocore >= 1.7.0 nowadays, so it's totally fine using the libosmocore API and drops the local duplicate. Change-Id: I95c59b31cf1b08e1d513b589ef386d2dd55f09a2
2022-08-08 13:07:35 +00:00
lchan ? gsm_chan_t_name(lchan->type) : "?", \
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
lchan ? lchan->nr : 0, \
make sure channel mode and s15_s0 are updated only after an ACK I noticed during testing that an lchan used as TCH/F in fact still had its channel mode set to Signalling -- because on Assignment, the Speech mode used to be placed in the *previous* lchan and the new lchan was never updated after the Activ ACK. This is unbearable confusion which I complained about numerous times, so far mostly for cosmetic reasons. But implementing re-assignment properly actually requires this to be cleaned up. Keep all volatile chan mode settings in lchan->activate.* or lchan->modify.*, and only update lchan->* members when an ACK has been received for those settings. So a failed request keeps a sane state. Make sure that those settings are in fact updated in the proper lchan, upon an ACK, so that subsequent re-assignment or mode-modify know the accurate lchan state. Related are upcoming patches that sort out the AMR multirate configuration in a similar fashion, see Iebac2dc26412d877e5364f90d6f2ed7a7952351e Ia7519d2fa9e7f0b61b222d27d077bde4660c40b9 Ie57f9d0e3912632903d9740291225bfd1634ed47. Related: SYS#5315 OS#4940 OS#3787 OS#3833 Change-Id: Ie0da36124d73efc28a8809b63d7c96e2167fc412
2021-04-27 23:17:14 +00:00
lchan ? gsm48_chan_mode_name(lchan->current_ch_mode_rate.chan_mode) : "?"
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
#define LOG_FMT_TO_LCHAN "%u-%u-%u-%s%s%s-%u"
#define LOG_ARGS_TO_LCHAN(lchan) \
lchan ? lchan->ts->trx->bts->nr : 0, \
lchan ? lchan->ts->trx->nr : 0, \
lchan ? lchan->ts->nr : 0, \
lchan ? gsm_pchan_name(lchan->ts->pchan_on_init) : "?", \
(!lchan || lchan->ts->pchan_on_init == lchan->ts->pchan_is)? "" : ":", \
(!lchan || lchan->ts->pchan_on_init == lchan->ts->pchan_is)? "" \
: gsm_pchan_name(lchan->ts->pchan_is), \
lchan ? lchan->nr : 0
#define LOG_FMT_HO_SCOPE "(subscr %s) %s"
#define LOG_ARGS_HO_SCOPE(conn) \
bsc_subscr_name(conn->bsub), \
handover_scope_name(conn->ho.scope)
/* Assume presence of local var 'conn' as struct gsm_subscriber_connection.
* This is a macro to preserve the source file and line number in logging. */
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
#define ho_count_bsc(counter) do { \
fix 'handover:*' counters: remove bogus increments To handle cases of unknown handover type (like failure to find the target cell), return -1 as counter code; treat -1 as skipping in ho_count_bsc() and ho_count_bts(). The handover:* counters indicate overall counts, without knowing whether inter- or intra-BSC, or whether the target ARFCN even exists. So they need to be counted separately, and must not serve as fallback category in result_counter_bsc() and result_counter_bts(). Related: OS#4736 Change-Id: Ie311e599d7bd35d33cf471c6c63e649246e8396a
2020-08-29 02:21:36 +00:00
/* If a handover target could not be found, the counter index may be -1. */ \
if (counter < 0) \
break; \
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
LOG_HO(conn, LOGL_DEBUG, "(BSC) incrementing rate counter: %s %s\n", \
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
bsc_ctr_description[counter].name, \
bsc_ctr_description[counter].description); \
Use new stat item/ctr getter APIs Generated with following and similar spatch snippets: """ @@ expression E1, E2; @@ - &E2->ctr[E1] + rate_ctr_group_get_ctr(E2, E1) """ Change-Id: I0b43f922a595d694ac0aeda80107ef9bf4e755e7
2021-06-04 15:30:21 +00:00
rate_ctr_inc(rate_ctr_group_get_ctr(conn->network->bsc_ctrs, counter)); \
for linter: s/while(0)/while (0) Change-Id: Ib422e7d1a7d543dcd8738581839ce55bb8fc29d2
2021-11-06 16:01:58 +00:00
} while (0)
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
/* Assume presence of local var 'conn' as struct gsm_subscriber_connection.
* Handles bts == NULL gracefully
* This is a macro to preserve the source file and line number in logging. */
#define ho_count_bts(bts, counter) do { \
fix 'handover:*' counters: remove bogus increments To handle cases of unknown handover type (like failure to find the target cell), return -1 as counter code; treat -1 as skipping in ho_count_bsc() and ho_count_bts(). The handover:* counters indicate overall counts, without knowing whether inter- or intra-BSC, or whether the target ARFCN even exists. So they need to be counted separately, and must not serve as fallback category in result_counter_bsc() and result_counter_bts(). Related: OS#4736 Change-Id: Ie311e599d7bd35d33cf471c6c63e649246e8396a
2020-08-29 02:21:36 +00:00
/* If a handover target could not be found, the counter index may be -1. */ \
if (counter < 0) \
break; \
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
LOG_HO(conn, LOGL_DEBUG, "(BTS) incrementing rate counter: %s %s\n", \
bts_ctr_description[counter].name, \
bts_ctr_description[counter].description); \
if (bts) \
Use new stat item/ctr getter APIs Generated with following and similar spatch snippets: """ @@ expression E1, E2; @@ - &E2->ctr[E1] + rate_ctr_group_get_ctr(E2, E1) """ Change-Id: I0b43f922a595d694ac0aeda80107ef9bf4e755e7
2021-06-04 15:30:21 +00:00
rate_ctr_inc(rate_ctr_group_get_ctr(bts->bts_ctrs, counter)); \
Add bts counters to count BTS events where we don't have a bts In some (error-) cases we might be unable to determine which BTS to use when counting handover events. We don't want to loose these events because then ctr(bsc) == sum(ctr(bsc->bts)) would not be true anymore. Those events are now counted by a counter in struct gsm_network which uses an index that is out of range for regular BTS (65536). Change-Id: Ic0f3edd5dc014c4eac5e8423133633a3e5d4c13e Related: SYS#4877
2020-08-20 13:37:35 +00:00
else \
Use new stat item/ctr getter APIs Generated with following and similar spatch snippets: """ @@ expression E1, E2; @@ - &E2->ctr[E1] + rate_ctr_group_get_ctr(E2, E1) """ Change-Id: I0b43f922a595d694ac0aeda80107ef9bf4e755e7
2021-06-04 15:30:21 +00:00
rate_ctr_inc(rate_ctr_group_get_ctr(conn->network->bts_unknown_ctrs, counter)); \
for linter: s/while(0)/while (0) Change-Id: Ib422e7d1a7d543dcd8738581839ce55bb8fc29d2
2021-11-06 16:01:58 +00:00
} while (0)
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
cosmetic tweaks on handover counting code I was a bit confused that grep did not find HO counters being used, so let's add some comments to better explain and provide a grep hook. Related: SYS#4878 Change-Id: I242de13e657286e09428a8ca6e583d8b5155faa2
2021-11-02 09:51:56 +00:00
/* Count handover result on both bts and bsc level.
* Call with 'counter' being the counter name without the "BSC_"/"BTS_" part,
* e.g. ho_count(conn_get_bts(conn), CTR_HANDOVER_ATTEMPTED); */
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
#define ho_count(bts, counter) do { \
cosmetic tweaks on handover counting code I was a bit confused that grep did not find HO counters being used, so let's add some comments to better explain and provide a grep hook. Related: SYS#4878 Change-Id: I242de13e657286e09428a8ca6e583d8b5155faa2
2021-11-02 09:51:56 +00:00
ho_count_bsc(BSC_##counter); \
ho_count_bts(bts, BTS_##counter); \
} while (0)
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
static uint8_t g_next_ho_ref = 1;
const char *handover_status(struct gsm_subscriber_connection *conn)
{
static char buf[256];
struct handover *ho = &conn->ho;
if (!conn)
return "";
if (ho->scope & (HO_INTRA_CELL | HO_INTRA_BSC)) {
if (ho->new_lchan)
snprintf(buf, sizeof(buf),
"("LOG_FMT_FROM_LCHAN") --HO-> (" LOG_FMT_TO_LCHAN ") " LOG_FMT_HO_SCOPE,
LOG_ARGS_FROM_LCHAN(conn->lchan),
LOG_ARGS_TO_LCHAN(ho->new_lchan),
LOG_ARGS_HO_SCOPE(conn));
else if (ho->new_bts)
snprintf(buf, sizeof(buf),
"("LOG_FMT_FROM_LCHAN") --HO-> ("LOG_FMT_BTS",%s) " LOG_FMT_HO_SCOPE,
LOG_ARGS_FROM_LCHAN(conn->lchan),
LOG_ARGS_BTS(ho->new_bts),
Use libosmocore available API to get value_list This API has been available since 1.0.0, and we actually require libosmocore >= 1.7.0 nowadays, so it's totally fine using the libosmocore API and drops the local duplicate. Change-Id: I95c59b31cf1b08e1d513b589ef386d2dd55f09a2
2022-08-08 13:07:35 +00:00
gsm_chan_t_name(ho->new_lchan_type),
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
LOG_ARGS_HO_SCOPE(conn));
else
snprintf(buf, sizeof(buf),
"("LOG_FMT_FROM_LCHAN") --HO->(?) " LOG_FMT_HO_SCOPE,
LOG_ARGS_FROM_LCHAN(conn->lchan),
LOG_ARGS_HO_SCOPE(conn));
} else if (ho->scope & HO_INTER_BSC_OUT)
snprintf(buf, sizeof(buf),
"("LOG_FMT_FROM_LCHAN") --HO-> (%s) " LOG_FMT_HO_SCOPE,
LOG_ARGS_FROM_LCHAN(conn->lchan),
fix/refactor neighbor config The neighbor configuration storage is fundamentally broken: it requires all local cells to be configured before being able to list them as neighbors of each other. Upon config write-back, the neighbor config however is placed back inline with the other config, and hence a written-out neighbor config no longer works on program restart. The cause of this problem is that the config is stored as explicit pointers between local cells (struct gsm_bts), which of course requires the pointer to exist before being able to reference it. Instead, store the actual configuration that the user entered as-is, without pointers or references to objects that need to be ready. Resolve the neighbors every time a neighbor is needed. Hence the user may enter any config at any place in the config file, even non-working config (like a BTS number that doesn't exist), and the relation to actual local or remote neighbor cells is made at runtime. Abort program startup if the initial neighbor configuration contains errors. Related: OS#5018 Change-Id: I9ed992f8bfff888b3933733c0576f92d50f2625b
2021-03-09 16:11:45 +00:00
cell_ab_to_str_c(OTC_SELECT, &ho->target_cell_ab),
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
LOG_ARGS_HO_SCOPE(conn));
else if (ho->scope & HO_INTER_BSC_IN) {
if (ho->new_lchan)
snprintf(buf, sizeof(buf),
"(remote:%s) --HO-> (local:%s|"LOG_FMT_TO_LCHAN") " LOG_FMT_HO_SCOPE,
ho->inter_bsc_in.cell_id_serving_name,
ho->inter_bsc_in.cell_id_target_name,
LOG_ARGS_TO_LCHAN(ho->new_lchan),
LOG_ARGS_HO_SCOPE(conn));
else if (ho->new_bts)
snprintf(buf, sizeof(buf),
"(remote:%s) --HO-> (local:%s|"LOG_FMT_BTS",%s) " LOG_FMT_HO_SCOPE,
ho->inter_bsc_in.cell_id_serving_name,
ho->inter_bsc_in.cell_id_target_name,
LOG_ARGS_BTS(ho->new_bts),
Use libosmocore available API to get value_list This API has been available since 1.0.0, and we actually require libosmocore >= 1.7.0 nowadays, so it's totally fine using the libosmocore API and drops the local duplicate. Change-Id: I95c59b31cf1b08e1d513b589ef386d2dd55f09a2
2022-08-08 13:07:35 +00:00
gsm_chan_t_name(ho->new_lchan_type),
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
LOG_ARGS_HO_SCOPE(conn));
else
snprintf(buf, sizeof(buf),
"(remote:%s) --HO-> (local:%s,%s) " LOG_FMT_HO_SCOPE,
ho->inter_bsc_in.cell_id_serving_name,
ho->inter_bsc_in.cell_id_target_name,
Use libosmocore available API to get value_list This API has been available since 1.0.0, and we actually require libosmocore >= 1.7.0 nowadays, so it's totally fine using the libosmocore API and drops the local duplicate. Change-Id: I95c59b31cf1b08e1d513b589ef386d2dd55f09a2
2022-08-08 13:07:35 +00:00
gsm_chan_t_name(ho->new_lchan_type),
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
LOG_ARGS_HO_SCOPE(conn));
} else
snprintf(buf, sizeof(buf), LOG_FMT_HO_SCOPE, LOG_ARGS_HO_SCOPE(conn));
return buf;
}
static struct osmo_fsm ho_fsm;
struct gsm_subscriber_connection *ho_fi_conn(struct osmo_fsm_inst *fi)
{
OSMO_ASSERT(fi);
OSMO_ASSERT(fi->fsm == &ho_fsm);
OSMO_ASSERT(fi->priv);
return fi->priv;
}
use libosmocore osmo_tdef Move the T_defs API to libosmocore as osmo_tdefs: remove the local T_defs API and use libosmocore's osmo_tdef* API instead. The root reason is moving the mgw_endpoint_fsm to libosmo-mgcp-client to be able to use it in osmo-msc for inter-MSC handover. When adding osmo_tdef, the new concept of timer groups was added to the API. It would make sense to apply group names here as well, but do not modify the VTY configuration for timers. The future might bring separate groups (or not). Depends: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 (libosmocore) Change-Id: I66674a5d8403d820038762888c846bae10ceac58
2019-01-28 02:52:14 +00:00
static const struct osmo_tdef_state_timeout ho_fsm_timeouts[32] = {
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
[HO_ST_WAIT_LCHAN_ACTIVE] = { .T = 23042 },
fix inter-BSC-HO-incoming for AoIP (1/2) Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is done establishing. For AoIP, the local RTP address towards the MSC already needs to be known before the Handover Request Acknowledge is sent, so the AoIP Transport Layer Address IE can be included. This patch only modifies the handover FSM, a subsequent patch adds the IE. Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
2019-03-14 03:36:40 +00:00
[HO_ST_WAIT_MGW_ENDPOINT_TO_MSC] = { .T = 23042 },
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
[HO_ST_WAIT_RR_HO_DETECT] = { .T = 23042 },
[HO_ST_WAIT_RR_HO_COMPLETE] = { .T = 23042 },
[HO_ST_WAIT_LCHAN_ESTABLISHED] = { .T = 23042 },
[HO_OUT_ST_WAIT_HO_COMMAND] = { .T = 7 },
[HO_OUT_ST_WAIT_CLEAR] = { .T = 8 },
};
/* Transition to a state, using the T timer defined in ho_fsm_timeouts.
* The actual timeout value is in turn obtained from network->T_defs.
* Assumes local variable fi exists. */
#define ho_fsm_state_chg(state) \
use libosmocore osmo_tdef Move the T_defs API to libosmocore as osmo_tdefs: remove the local T_defs API and use libosmocore's osmo_tdef* API instead. The root reason is moving the mgw_endpoint_fsm to libosmo-mgcp-client to be able to use it in osmo-msc for inter-MSC handover. When adding osmo_tdef, the new concept of timer groups was added to the API. It would make sense to apply group names here as well, but do not modify the VTY configuration for timers. The future might bring separate groups (or not). Depends: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 (libosmocore) Change-Id: I66674a5d8403d820038762888c846bae10ceac58
2019-01-28 02:52:14 +00:00
osmo_tdef_fsm_inst_state_chg(fi, state, \
ho_fsm_timeouts, \
((struct gsm_subscriber_connection*)(fi->priv))->network->T_defs, \
5)
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
/* Log failure and transition to HO_ST_FAILURE, which triggers the appropriate actions. */
#define ho_fail(result, fmt, args...) do { \
LOG_HO(conn, LOGL_ERROR, "Handover failed in state %s, %s: " fmt "\n", \
osmo_fsm_inst_state_name(conn->fi), handover_result_name(result), ## args); \
handover_end(conn, result); \
for linter: s/while(0)/while (0) Change-Id: Ib422e7d1a7d543dcd8738581839ce55bb8fc29d2
2021-11-06 16:01:58 +00:00
} while (0)
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
#define ho_success() do { \
LOG_HO(conn, LOGL_DEBUG, "Handover succeeded\n"); \
handover_end(conn, HO_RESULT_OK); \
for linter: s/while(0)/while (0) Change-Id: Ib422e7d1a7d543dcd8738581839ce55bb8fc29d2
2021-11-06 16:01:58 +00:00
} while (0)
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
/* issue handover to a cell identified by ARFCN and BSIC */
ensure trigger_ho() returns zero only when HO or AS was indeed triggered In an upcoming patch, handover_decision_2.c will use this indicator to decide whether to start a penalty timer: "hodec2: add low-rxqual-assignment penalty timer (2/2)" Id00a07313fe04eec509b336c0637b59c707760e0 Related: SYS#5198 Change-Id: I5de385e0666f716184a62e6e70d656545ac5d2ee
2021-07-08 16:28:20 +00:00
int handover_request(struct handover_out_req *req)
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
{
struct gsm_subscriber_connection *conn;
OSMO_ASSERT(req->old_lchan);
conn = req->old_lchan->conn;
OSMO_ASSERT(conn && conn->fi);
comment and VTY doc tweaks Clarify some in-code comments. Fix descriptions of some handover timers, which still talked of "MO" and "MT" handover -- which we now call "inter-BSC out" or "inter-BSC in" instead. Change-Id: I8429a830edd0325893ac90f22fcc05309617bd2d
2019-07-11 01:43:34 +00:00
/* To make sure we're allowed to start a handover, go through a gscon event dispatch. If that is accepted, the
* same req is passed to handover_start(). */
ensure trigger_ho() returns zero only when HO or AS was indeed triggered In an upcoming patch, handover_decision_2.c will use this indicator to decide whether to start a penalty timer: "hodec2: add low-rxqual-assignment penalty timer (2/2)" Id00a07313fe04eec509b336c0637b59c707760e0 Related: SYS#5198 Change-Id: I5de385e0666f716184a62e6e70d656545ac5d2ee
2021-07-08 16:28:20 +00:00
return osmo_fsm_inst_dispatch(conn->fi, GSCON_EV_HANDOVER_START, req);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
}
/* Check that ho has old_lchan and/or new_lchan and conn pointers match.
* If old_lchan and/or new_lchan are NULL, omit those checks.
* On error, return false, log an error and call handover_end() with HO_RESULT_ERROR. */
bool handover_is_sane(struct gsm_subscriber_connection *conn, struct gsm_lchan *old_lchan, struct gsm_lchan *new_lchan)
{
if (!conn->ho.fi) {
LOG_HO(conn, LOGL_ERROR, "No handover ongoing\n");
return false;
}
if (old_lchan
&& (conn != old_lchan->conn || conn->lchan != old_lchan))
goto insane;
if (new_lchan
&& (conn != new_lchan->conn || conn->ho.new_lchan != new_lchan))
goto insane;
if (conn->lchan && conn->lchan == conn->ho.new_lchan)
goto insane;
return true;
insane:
LOG_HO(conn, LOGL_ERROR, "Handover state is corrupted\n");
handover_end(conn, HO_RESULT_ERROR);
return false;
}
static void ho_fsm_update_id(struct osmo_fsm_inst *fi, const char *label)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
if (conn->fi->id)
osmo_fsm_inst_update_id_f(fi, "%s_%s", label, conn->fi->id);
else
osmo_fsm_inst_update_id_f(fi, "%s_conn%u", label, conn->sccp.conn_id);
}
static void handover_reset(struct gsm_subscriber_connection *conn)
{
move mgw endpoint FSM to osmo-mgw.git osmo-mgw.git also includes fixes of the MGW endpoint FSM, for example I92a9944acc96398acd6649f9c3c5badec5dd6dcc. Depends: I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I03e6b48d9b0a5370310d5f56809259ff7909cf9d
2019-04-23 16:37:37 +00:00
struct osmo_mgcpc_ep_ci *ci;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if (conn->ho.new_lchan)
/* New lchan was activated but never passed to a conn */
Send EUTRAN neighs based on whether Common Id msg contained Last used E-UTRAN PLMN ID From 3GPP TS 48.008 sec 3.1.30 "Common ID": """ If the SCCP connection is established due to CSFB from E-UTRAN and the MSC supports return to the last used PLMN after CS fallback, then it should send the COMMON ID message to the BSS including the Last used E-UTRAN PLMN ID information element if available at the MSC immediately following the successful SCCP connection setup. """ Furthermore, 3GPP TS 48.008 version 16.0.0 Release 16 "3.2.1.21 CLEAR COMMAND", for field CSFB Indication, states: """ NOTE: This information element doesn't serve any useful purpose. MSCs should not send the information element unless it is required by the recipients (due to the need to interwork with older versions of the protocol). It is expected that in future versions of the present document, this information element will be deleted from this message. """ Hence, build up the EUTRAN neighbor list based on whether we received the Last E-UTRAN PLMN ID IE during Common Id. In the future, we should probably filter the list while populating it based on the received IE. This change will also allow reusing same mechanism for SRVCC EUTRAN->GERAN support, where te Last E-UTRAN PLMN ID IE can be found inside "Old BSS to New BSS information" IE in msg HANDOVER REQUEST. Related: SYS#5337 Change-Id: I5d290ac55eca5adde1c33396422f4c10b83c03d5
2021-04-12 18:19:30 +00:00
lchan_release(conn->ho.new_lchan, false, true, RSL_ERR_EQUIPMENT_FAIL,
NULL);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ci = conn->ho.created_ci_for_msc;
if (ci) {
gscon_forget_mgw_endpoint_ci(conn, ci);
/* If this is the last endpoint released, the mgw_endpoint_fsm will terminate and tell
* the gscon about it. */
move mgw endpoint FSM to osmo-mgw.git osmo-mgw.git also includes fixes of the MGW endpoint FSM, for example I92a9944acc96398acd6649f9c3c5badec5dd6dcc. Depends: I9a3effd38e72841529df6c135c077116981dea36 (osmo-mgw) Change-Id: I03e6b48d9b0a5370310d5f56809259ff7909cf9d
2019-04-23 16:37:37 +00:00
osmo_mgcpc_ep_ci_dlcx(ci);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
}
conn->ho = (struct handover){
.fi = conn->ho.fi,
};
}
Support building with -Werror=strict-prototypes / -Werror=old-style-definition Unfortunately "-std=c99" is not sufficient to make gcc ignore cold that uses constructs of earlier C standards, which were abandoned in C99. See https://lwn.net/ml/fedora-devel/Y1kvF35WozzGBpc8@redhat.com/ for some related discussion. Change-Id: Ic92aa70d569778a776f4c5d24c455f71fd50b61b
2022-11-03 10:50:48 +00:00
void handover_fsm_init(void)
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
{
OSMO_ASSERT(osmo_fsm_register(&ho_fsm) == 0);
}
void handover_fsm_alloc(struct gsm_subscriber_connection *conn)
{
OSMO_ASSERT(conn->fi);
OSMO_ASSERT(!conn->ho.fi);
conn->ho.fi = osmo_fsm_inst_alloc_child(&ho_fsm, conn->fi, GSCON_EV_HANDOVER_END);
OSMO_ASSERT(conn->ho.fi);
conn->ho.fi->priv = conn;
}
static void handover_start_intra_bsc(struct gsm_subscriber_connection *conn);
static void handover_start_inter_bsc_out(struct gsm_subscriber_connection *conn,
const struct gsm0808_cell_id_list2 *target_cells);
/* Invoked by gscon if a handover was accepted to start now. */
void handover_start(struct handover_out_req *req)
{
OSMO_ASSERT(req && req->old_lchan && req->old_lchan->conn);
struct gsm_subscriber_connection *conn = req->old_lchan->conn;
fix/refactor neighbor config The neighbor configuration storage is fundamentally broken: it requires all local cells to be configured before being able to list them as neighbors of each other. Upon config write-back, the neighbor config however is placed back inline with the other config, and hence a written-out neighbor config no longer works on program restart. The cause of this problem is that the config is stored as explicit pointers between local cells (struct gsm_bts), which of course requires the pointer to exist before being able to reference it. Instead, store the actual configuration that the user entered as-is, without pointers or references to objects that need to be ready. Resolve the neighbors every time a neighbor is needed. Hence the user may enter any config at any place in the config file, even non-working config (like a BTS number that doesn't exist), and the relation to actual local or remote neighbor cells is made at runtime. Abort program startup if the initial neighbor configuration contains errors. Related: OS#5018 Change-Id: I9ed992f8bfff888b3933733c0576f92d50f2625b
2021-03-09 16:11:45 +00:00
const struct cell_ab *search_for = &req->target_cell_ab;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
struct handover *ho = &conn->ho;
neighbor config: allow re-using ARFCN+BSIC pairs Fix neighbor config to match OsmoBSC manual: implement the plan for neighbor configuration that was so far only described in the manual without actually being in operation. This first allows re-using ARFCN+BSIC pairs in and across BSS. So far the handover_start() code always looked for handover target cells across *all* local cells, even if they were not listed as neighbors to a source cell. Imply all cells as neighbors only as long as there are no explicit neighbors configured. As soon as the first 'neighbor' line appears in a 'bts' config, only the listed neighbors are regarded as handover target cells. (The 'neighbor-list' commands are not related to this, only the relatively new 'neighbor (bts|lac|cgi|...)' commands affect actual handover procedures.) TTCN3 tests TC_ho_neighbor_config_1 thru _7 play through the various aspects of neighbor configuration: both the legacy implicit all-cells-are-neighbors as well as allowing only explicit neighbors by config. Related: OS#4056 Related: osmo-ttcn3-hacks Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc Change-Id: I29bca59ab232eddc74e0d4698efb9c9992443983
2019-07-12 23:12:53 +00:00
struct gsm_bts *local_target_cell = NULL;
fix/refactor neighbor config The neighbor configuration storage is fundamentally broken: it requires all local cells to be configured before being able to list them as neighbors of each other. Upon config write-back, the neighbor config however is placed back inline with the other config, and hence a written-out neighbor config no longer works on program restart. The cause of this problem is that the config is stored as explicit pointers between local cells (struct gsm_bts), which of course requires the pointer to exist before being able to reference it. Instead, store the actual configuration that the user entered as-is, without pointers or references to objects that need to be ready. Resolve the neighbors every time a neighbor is needed. Hence the user may enter any config at any place in the config file, even non-working config (like a BTS number that doesn't exist), and the relation to actual local or remote neighbor cells is made at runtime. Abort program startup if the initial neighbor configuration contains errors. Related: OS#5018 Change-Id: I9ed992f8bfff888b3933733c0576f92d50f2625b
2021-03-09 16:11:45 +00:00
struct gsm0808_cell_id_list2 remote_target_cells = {};
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if (conn->ho.fi) {
LOG_HO(conn, LOGL_ERROR, "Handover requested while another handover is ongoing; Ignore\n");
return;
}
handover_reset(conn);
neighbor config: allow re-using ARFCN+BSIC pairs Fix neighbor config to match OsmoBSC manual: implement the plan for neighbor configuration that was so far only described in the manual without actually being in operation. This first allows re-using ARFCN+BSIC pairs in and across BSS. So far the handover_start() code always looked for handover target cells across *all* local cells, even if they were not listed as neighbors to a source cell. Imply all cells as neighbors only as long as there are no explicit neighbors configured. As soon as the first 'neighbor' line appears in a 'bts' config, only the listed neighbors are regarded as handover target cells. (The 'neighbor-list' commands are not related to this, only the relatively new 'neighbor (bts|lac|cgi|...)' commands affect actual handover procedures.) TTCN3 tests TC_ho_neighbor_config_1 thru _7 play through the various aspects of neighbor configuration: both the legacy implicit all-cells-are-neighbors as well as allowing only explicit neighbors by config. Related: OS#4056 Related: osmo-ttcn3-hacks Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc Change-Id: I29bca59ab232eddc74e0d4698efb9c9992443983
2019-07-12 23:12:53 +00:00
/* When handover_start() is invoked by the gscon, it expects a HANDOVER_END event. The best way to ensure this
* is to always create a handover_fsm instance, even if the target cell is not resolved yet. Any failure should
* then call handover_end(), which ensures that the conn snaps back to a valid state. */
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
handover_fsm_alloc(conn);
fix 'handover:*' counters: add missing / move increments Move initial 'handover:attempted' counts from bsc_subscr_conn_fsm.c to handover_fsm.c, where all the other counters are handled. Add missing increments for the overall 'handover:*' counts. Related: OS#4736 Change-Id: I783bdedafc0eb8f2df9ea100792846fecc7ccbf7
2020-08-29 02:21:36 +00:00
ho_count(conn_get_bts(conn), CTR_HANDOVER_ATTEMPTED);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho->from_hodec_id = req->from_hodec_id;
ho->new_lchan_type = req->new_lchan_type == GSM_LCHAN_NONE ?
req->old_lchan->type : req->new_lchan_type;
fix/refactor neighbor config The neighbor configuration storage is fundamentally broken: it requires all local cells to be configured before being able to list them as neighbors of each other. Upon config write-back, the neighbor config however is placed back inline with the other config, and hence a written-out neighbor config no longer works on program restart. The cause of this problem is that the config is stored as explicit pointers between local cells (struct gsm_bts), which of course requires the pointer to exist before being able to reference it. Instead, store the actual configuration that the user entered as-is, without pointers or references to objects that need to be ready. Resolve the neighbors every time a neighbor is needed. Hence the user may enter any config at any place in the config file, even non-working config (like a BTS number that doesn't exist), and the relation to actual local or remote neighbor cells is made at runtime. Abort program startup if the initial neighbor configuration contains errors. Related: OS#5018 Change-Id: I9ed992f8bfff888b3933733c0576f92d50f2625b
2021-03-09 16:11:45 +00:00
ho->target_cell_ab = req->target_cell_ab;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
fix/refactor neighbor config The neighbor configuration storage is fundamentally broken: it requires all local cells to be configured before being able to list them as neighbors of each other. Upon config write-back, the neighbor config however is placed back inline with the other config, and hence a written-out neighbor config no longer works on program restart. The cause of this problem is that the config is stored as explicit pointers between local cells (struct gsm_bts), which of course requires the pointer to exist before being able to reference it. Instead, store the actual configuration that the user entered as-is, without pointers or references to objects that need to be ready. Resolve the neighbors every time a neighbor is needed. Hence the user may enter any config at any place in the config file, even non-working config (like a BTS number that doesn't exist), and the relation to actual local or remote neighbor cells is made at runtime. Abort program startup if the initial neighbor configuration contains errors. Related: OS#5018 Change-Id: I9ed992f8bfff888b3933733c0576f92d50f2625b
2021-03-09 16:11:45 +00:00
if (find_handover_target_cell(&local_target_cell, &remote_target_cells,
cosmetic: dissolve error-goto with single source in handover_start() Change-Id: I9c7d10c36f3f868100c1aa2d0433ceed74161175
2020-08-29 23:25:38 +00:00
conn, search_for, true)) {
ho counters: count invalid target cell as 'error', not 'no_channel' Related: OS#4736 Change-Id: If6d6b7262536831ebb2b638efe521dd5a8153cdb
2020-08-29 23:30:29 +00:00
handover_end(conn, HO_RESULT_ERROR);
cosmetic: dissolve error-goto with single source in handover_start() Change-Id: I9c7d10c36f3f868100c1aa2d0433ceed74161175
2020-08-29 23:25:38 +00:00
return;
}
neighbor config: allow re-using ARFCN+BSIC pairs Fix neighbor config to match OsmoBSC manual: implement the plan for neighbor configuration that was so far only described in the manual without actually being in operation. This first allows re-using ARFCN+BSIC pairs in and across BSS. So far the handover_start() code always looked for handover target cells across *all* local cells, even if they were not listed as neighbors to a source cell. Imply all cells as neighbors only as long as there are no explicit neighbors configured. As soon as the first 'neighbor' line appears in a 'bts' config, only the listed neighbors are regarded as handover target cells. (The 'neighbor-list' commands are not related to this, only the relatively new 'neighbor (bts|lac|cgi|...)' commands affect actual handover procedures.) TTCN3 tests TC_ho_neighbor_config_1 thru _7 play through the various aspects of neighbor configuration: both the legacy implicit all-cells-are-neighbors as well as allowing only explicit neighbors by config. Related: OS#4056 Related: osmo-ttcn3-hacks Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc Change-Id: I29bca59ab232eddc74e0d4698efb9c9992443983
2019-07-12 23:12:53 +00:00
if (local_target_cell) {
ho->new_bts = local_target_cell;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
handover_start_intra_bsc(conn);
return;
}
fix/refactor neighbor config The neighbor configuration storage is fundamentally broken: it requires all local cells to be configured before being able to list them as neighbors of each other. Upon config write-back, the neighbor config however is placed back inline with the other config, and hence a written-out neighbor config no longer works on program restart. The cause of this problem is that the config is stored as explicit pointers between local cells (struct gsm_bts), which of course requires the pointer to exist before being able to reference it. Instead, store the actual configuration that the user entered as-is, without pointers or references to objects that need to be ready. Resolve the neighbors every time a neighbor is needed. Hence the user may enter any config at any place in the config file, even non-working config (like a BTS number that doesn't exist), and the relation to actual local or remote neighbor cells is made at runtime. Abort program startup if the initial neighbor configuration contains errors. Related: OS#5018 Change-Id: I9ed992f8bfff888b3933733c0576f92d50f2625b
2021-03-09 16:11:45 +00:00
if (remote_target_cells.id_list_len) {
handover_start_inter_bsc_out(conn, &remote_target_cells);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
return;
}
neighbor config: allow re-using ARFCN+BSIC pairs Fix neighbor config to match OsmoBSC manual: implement the plan for neighbor configuration that was so far only described in the manual without actually being in operation. This first allows re-using ARFCN+BSIC pairs in and across BSS. So far the handover_start() code always looked for handover target cells across *all* local cells, even if they were not listed as neighbors to a source cell. Imply all cells as neighbors only as long as there are no explicit neighbors configured. As soon as the first 'neighbor' line appears in a 'bts' config, only the listed neighbors are regarded as handover target cells. (The 'neighbor-list' commands are not related to this, only the relatively new 'neighbor (bts|lac|cgi|...)' commands affect actual handover procedures.) TTCN3 tests TC_ho_neighbor_config_1 thru _7 play through the various aspects of neighbor configuration: both the legacy implicit all-cells-are-neighbors as well as allowing only explicit neighbors by config. Related: OS#4056 Related: osmo-ttcn3-hacks Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc Change-Id: I29bca59ab232eddc74e0d4698efb9c9992443983
2019-07-12 23:12:53 +00:00
/* should never reach this, because find_handover_target_cell() would have returned error. */
OSMO_ASSERT(false);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
}
/*! Hand over the specified logical channel to the specified new BTS and possibly change the lchan type.
* This is the main entry point for the actual handover algorithm, after the decision whether to initiate
* HO to a specific BTS. To not change the lchan type, pass old_lchan->type. */
static void handover_start_intra_bsc(struct gsm_subscriber_connection *conn)
{
struct handover *ho = &conn->ho;
struct osmo_fsm_inst *fi = conn->ho.fi;
struct lchan_activate_info info;
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
struct gsm_bts *bts = conn_get_bts(conn);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
OSMO_ASSERT(ho->new_bts);
OSMO_ASSERT(ho->new_lchan_type != GSM_LCHAN_NONE);
OSMO_ASSERT(!ho->new_lchan);
cosmetic: use local var in handover_start_intra_bsc() Change-Id: I3ae079a2aa9ff3980acd5a212cb287a96a1dc0ed
2020-08-29 23:58:33 +00:00
ho->scope = (ho->new_bts == bts) ? HO_INTRA_CELL : HO_INTRA_BSC;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho->ho_ref = g_next_ho_ref++;
ho->async = true;
refactor handover penalty timers So far the list of penalty timers was stored for an opaque target pointer. That was either a gsm_bts pointer for a local BTS, or a cell identifier list pointer for a remote-BSS cell. Reasons to refactor penalty timers: - The cell identifier list pointer came from the neighbor configuration storage, but the way cell neighbor config is stored will change in a subsequent patch. There will be no more cell identifier lists there. - Storing object pointers is inherently unsafe -- if an object gets removed and another gets allocated, the penalty timer could theoretically remain in force for an unrelated object. Rather store penalty timers for specific Cell IDs. Since remote-BSS neighbors can be requested by a cell identifier *list*, use a gsm0808_cell_id_list2 as key in the list of penalty timers. Fix handover_test.c: have different CI for each local BTS. So far it was the same LAC+CI for all BTSes, which now would make the test fail, because any penalty timer would appear to apply to all local cells. Related: OS#5018 Change-Id: I72dd6226a6d69c3f653a3174c6f55bf4eecc6885
2021-03-09 16:10:18 +00:00
gsm_bts_cell_id_list(&ho->target_cell_ids, ho->new_bts);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
lchan_select: allow different alloc order for assignment and handover A follow-up patch implements a special channel allocation mode, which is only working for assignment (basically TCH selection for a voice call). This mode cannot be employed for initial CHANNEL REQUEST or handover due to the absence of an already established lchan. Adding this mode to the existing VTY command syntax would be confusing: channel allocator (ascending|desscending|dynamic) ^^^^^^^ so this patch extends the VTY syntax in a way that it becomes possible to configure different channel allocator modes for different cases: OsmoBSC(config-net-bts)# channel allocator mode ? set-all Set a single mode for all variants chan-req Channel allocation for CHANNEL REQUEST (RACH) assignment Channel allocation for assignment handover Channel allocation for handover The old command syntax, which is basically 'set-all', is kept for backwards compatibility, but marked as deprecated. Change-Id: I3ae73b36ee9433cc768376b56f0765e5f416162f Related: SYS#5460
2022-06-05 19:43:28 +00:00
ho->new_lchan = lchan_select_by_type(ho->new_bts,
ho->new_lchan_type,
lchan_select: implement dynamic selection mode for assignment This change implements an additional channel allocation mode, which can be employed during a TCH channel allocation for assignment. Selection between ascending and descending order is performed depending on pre-configured parameters: * Uplink RxLev threshold and number of samples for averaging, * C0 (BCCH carrier) channel load threshold. This is useful in setups where Tx power of the RF carriers cannot be adjusted +dynamically at run-time and thus BS Power Control cannot be performed. In such setups the BCCH carrier is transmitting at relatively higher power than the other RF carriers. The key idea is to allocate channels in a smarter way, so that UEs with poor signal would get channels on carriers with high Tx power, while UEs with good signal could use carriers with lower Tx power. Change-Id: I1b7a0d706976b73cc5c30a8714b830811addfe8d Related: osmo-ttcn3-hacks.git Ia522f37c1c001b3a36f5145b8875fbb88311c2e5 Related: SYS#5460
2022-06-15 19:10:16 +00:00
SELECT_FOR_HANDOVER,
NULL);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
Count intra-cell and intra-bsc handover separately Currently the counters don't distinguish between intra-cell and intra-bsc handover. Add _CTR_INTRA_CELL_HO_ and _CTR_INTRA_BSC_HO_ counters to track intra-cell/bsc handover separately. Change-Id: I3a1195640b99813036c9f1426ee5f07548e26547 Related: SYS#4877
2020-08-20 13:25:37 +00:00
if (ho->scope & HO_INTRA_CELL) {
ho_count(bts, CTR_INTRA_CELL_HO_ATTEMPTED);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho_fsm_update_id(fi, "intraCell");
Count intra-cell and intra-bsc handover separately Currently the counters don't distinguish between intra-cell and intra-bsc handover. Add _CTR_INTRA_CELL_HO_ and _CTR_INTRA_BSC_HO_ counters to track intra-cell/bsc handover separately. Change-Id: I3a1195640b99813036c9f1426ee5f07548e26547 Related: SYS#4877
2020-08-20 13:25:37 +00:00
} else {
ho_count(bts, CTR_INTRA_BSC_HO_ATTEMPTED);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho_fsm_update_id(fi, "intraBSC");
implement incoming_intra_bsc_ho:* rate counters We have lots of counters for intra-BSC handover *away from* a given BTS, but still missing are counters indicating how many handovers *targeted* a given BTS. Also count incoming HO. Related: SYS#4878 Related: Iba229313d73fa20266f6d4eac5820579fb14c604 (osmo-ttcn3-hacks) Change-Id: Id9f2c6e2865ebe680879018fff08d283ce24c983
2021-11-02 12:25:48 +00:00
ho_count_bts(ho->new_bts, BTS_CTR_INCOMING_INTRA_BSC_HO_ATTEMPTED);
Count intra-cell and intra-bsc handover separately Currently the counters don't distinguish between intra-cell and intra-bsc handover. Add _CTR_INTRA_CELL_HO_ and _CTR_INTRA_BSC_HO_ counters to track intra-cell/bsc handover separately. Change-Id: I3a1195640b99813036c9f1426ee5f07548e26547 Related: SYS#4877
2020-08-20 13:25:37 +00:00
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if (!ho->new_lchan) {
ho_fail(HO_RESULT_FAIL_NO_CHANNEL,
"No %s lchan available on BTS %u",
Use libosmocore available API to get value_list This API has been available since 1.0.0, and we actually require libosmocore >= 1.7.0 nowadays, so it's totally fine using the libosmocore API and drops the local duplicate. Change-Id: I95c59b31cf1b08e1d513b589ef386d2dd55f09a2
2022-08-08 13:07:35 +00:00
gsm_chan_t_name(ho->new_lchan_type), ho->new_bts->nr);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
return;
}
LOG_HO(conn, LOGL_DEBUG, "Selected lchan %s\n", gsm_lchan_name(ho->new_lchan));
ho_fsm_state_chg(HO_ST_WAIT_LCHAN_ACTIVE);
info = (struct lchan_activate_info){
cosmetic: rename FOR_* to ACTIVATE_FOR_* Soon, there will also be enums with ASSIGNMENT_FOR_* and MODIFY_FOR_* naming. Add the ACTIVATE_ prefix to the existing enum to clarify. Change-Id: I12190d4d154a1da6a9ebc9a755ccc2fe382ff188
2021-05-10 15:47:46 +00:00
.activ_for = ACTIVATE_FOR_HANDOVER,
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
.for_conn = conn,
make sure channel mode and s15_s0 are updated only after an ACK I noticed during testing that an lchan used as TCH/F in fact still had its channel mode set to Signalling -- because on Assignment, the Speech mode used to be placed in the *previous* lchan and the new lchan was never updated after the Activ ACK. This is unbearable confusion which I complained about numerous times, so far mostly for cosmetic reasons. But implementing re-assignment properly actually requires this to be cleaned up. Keep all volatile chan mode settings in lchan->activate.* or lchan->modify.*, and only update lchan->* members when an ACK has been received for those settings. So a failed request keeps a sane state. Make sure that those settings are in fact updated in the proper lchan, upon an ACK, so that subsequent re-assignment or mode-modify know the accurate lchan state. Related are upcoming patches that sort out the AMR multirate configuration in a similar fashion, see Iebac2dc26412d877e5364f90d6f2ed7a7952351e Ia7519d2fa9e7f0b61b222d27d077bde4660c40b9 Ie57f9d0e3912632903d9740291225bfd1634ed47. Related: SYS#5315 OS#4940 OS#3787 OS#3833 Change-Id: Ie0da36124d73efc28a8809b63d7c96e2167fc412
2021-04-27 23:17:14 +00:00
.ch_mode_rate = conn->lchan->current_ch_mode_rate,
lchan activation: add explicit encryption info to activation For intra-BSC handover, the previous encryption is copied from the old lchan, which of course is not available during inter-BSC handover. Hence the lchan activation info needs to include an explicit encryption information, and we must not rely on the presence of the previous lchan to copy encryption information from. Add struct lchan_activate_info.encr to allow passing encryption info through lchan_activate() without requiring a previous struct gsm_lchan to be present. Instead of copying from the old lchan, always copy encryption info to lchan_activate_info, and during activation, just before sending the Channel Activation, copy the lchan_activate_info.encr to the new lchan. This prepares for upcoming I5b269f50bd2092516bfdf87746196983d3ac49d1 which obtains the encryption information from an intra-BSC-incoming Handover Request message. Related: OS#3842 Related: I5b269f50bd2092516bfdf87746196983d3ac49d1 Change-Id: Ib3d259a5711add65ab7298bfa3977855a17a1642
2019-03-15 01:49:18 +00:00
.encr = conn->lchan->encr,
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
.requires_voice_stream = conn->lchan->mgw_endpoint_ci_bts ? true : false,
.msc_assigned_cic = conn->ho.inter_bsc_in.msc_assigned_cic,
make sure early lchan act failure resets the lchan Fix crash after AMR configuration fails. The crash is due to an assertion that finds a non-NULL conn in the lchan, when re-using an lchan that has failed in AMR configuration earlier on. That is because the AMR config still happens in state UNUSED. DCHAN ERROR lchan(0-0-2-TCH_F_TCH_H_PDCH-0)[0x6120000066a0]{UNUSED}: (type=TCH_F) lchan allocation failed in state UNUSED: Can not generate multirate configuration IE ... DCHAN DEBUG lchan(0-0-2-TCH_F_TCH_H_PDCH-0)[0x6120000066a0]{UNUSED}: (type=TCH_F) After failure handling, already in state UNUSED ... ... DCHAN DEBUG lchan(0-0-2-TCH_F_TCH_H_PDCH-0)[0x6120000066a0]{UNUSED}: Received Event LCHAN_EV_ACTIVATE (lchan_fsm.c:324) Assert failed !lchan->conn ../../../../src/osmo-bsc/src/osmo-bsc/lchan_fsm.c:491 The FSM design idea is that when returning to the UNUSED state, all lchan state is cleared. However, when calling lchan_activate(), a failure may happen still in state UNUSED, so that we don't transition *back* to UNUSED properly. So, first transition out of UNUSED before failures can happen. (Other ways to solve this would be to invoke lchan clearing even if already in UNUSED, but semantically, transitioning first makes more sense.) Upon LCHAN_EV_ACTIVATE, just remember the lchan_activate_info and transition to WAIT_TS_READY, so that on lchan_fail(), we can normally transition back to UNUSED and clear the lchan. Move the initial lchan activation code to lchan_fsm_wait_ts_ready_onenter(). Also, there is a bit of duplication of members of the lchan->activate (lchan state) and the lchan_activate_info (passed to lchan_activate()) structs. The fix for this also removes the dup: Add struct lchan_activate_info as child struct at lchan->activate.info, drop the other lchan->activate members that would dup .info.*. Move struct lchan_activate_info declaration to gsm_data.h. Apply the new '.info' member struct throughout the code. Related: OS#3737 Change-Id: Ide665b10fa3f4583059c55346db8da833959e3cc
2018-12-19 16:19:02 +00:00
.re_use_mgw_endpoint_from_lchan = conn->lchan,
lchan_fsm: split off lchan_rtp_fsm, establish RTP a bit earlier Change-Id: Id7a4407d9b63be05ce63f5f2768b7d7e3d5c86fb
2018-07-12 19:23:26 +00:00
.wait_before_switching_rtp = true,
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
};
make sure channel mode and s15_s0 are updated only after an ACK I noticed during testing that an lchan used as TCH/F in fact still had its channel mode set to Signalling -- because on Assignment, the Speech mode used to be placed in the *previous* lchan and the new lchan was never updated after the Activ ACK. This is unbearable confusion which I complained about numerous times, so far mostly for cosmetic reasons. But implementing re-assignment properly actually requires this to be cleaned up. Keep all volatile chan mode settings in lchan->activate.* or lchan->modify.*, and only update lchan->* members when an ACK has been received for those settings. So a failed request keeps a sane state. Make sure that those settings are in fact updated in the proper lchan, upon an ACK, so that subsequent re-assignment or mode-modify know the accurate lchan state. Related are upcoming patches that sort out the AMR multirate configuration in a similar fashion, see Iebac2dc26412d877e5364f90d6f2ed7a7952351e Ia7519d2fa9e7f0b61b222d27d077bde4660c40b9 Ie57f9d0e3912632903d9740291225bfd1634ed47. Related: SYS#5315 OS#4940 OS#3787 OS#3833 Change-Id: Ie0da36124d73efc28a8809b63d7c96e2167fc412
2021-04-27 23:17:14 +00:00
info.ch_mode_rate.chan_rate = chan_t_to_chan_rate(ho->new_lchan->type);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
lchan activation: indicate whether TA is known On lchan activation, we already know the Timing Advance in most situations: from the Channel Request RACH, or from a previous lchan in the same cell. Place this information in lchan->activate.info.ta. So far, the lchan->last_ta (until recently called rqd_ta) was used to store the initial TA for channel activation -- move the initial TA to lchan->activate.info.ta, for proper scoping. Only an inter-cell handover does not yet know a Timing Advance (until the Handover Detection RACH is received), so indicate activate.info.ta_known = false for that case. If ta_known is false, do not include an Access Delay IE in the Channel Activation message, ensuring that the BTS does not use an arbitrary TA that is likely inaccurate. The effect for OsmoBTS is that we will *not* start the downlink SACCH on channel activation for inter-cell handover, but will wait for a HO RACH first, and then use the correct TA when enabling downlink SACCH. Related: OS#4008 SYS#5192 Change-Id: I986bf93e8acd6aef7eaf63ac962480b680aa894f
2021-01-27 22:45:33 +00:00
/* For intra-cell handover, we know the accurate Timing Advance from the previous lchan. For inter-cell
* handover, no Timing Advance for the new cell is known, so leave it unset. */
if (ho->new_bts == bts) {
info.ta = conn->lchan->last_ta;
info.ta_known = true;
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
lchan_activate(ho->new_lchan, &info);
}
SRVCC: Parse Last Used E-UTRAN PLMN Id in Handover Request Whenever SRVCC EUTRAN->GERAN is performed by the CN, it will set the Last Used E-UTRAN PLMN Id in order for the BSS to inform the MS about EUTRAN neighbors once the call is over. The last part (sending EUTRAN neighs) is already implemented, since same thing is done as per CSFB. However, we lacked the first part, where the EUTRAN PLMN Id is recorded for later use. Actually, in both cases, we end up building the list of neighbors without taking into accound the PLMN value (hence no filtering of configured neighs), but it only sends such a list if any PLMN was stored there, which means this patch is still necessary for a quick fallback to 4G after the call is over. Related: SYS#5337 Depends: libosmocore.git Change-Id I0e55e947b6fef6dad0cf1a6c16b781bef4cc76c5 Change-Id: Ia5008f11a4c36ef8085a2037d4abddd131086e6e
2021-04-14 15:14:07 +00:00
/* 3GPP TS 48.008 § 3.2.2.58 Old BSS to New BSS Information */
static void parse_old2new_bss_info(struct gsm_subscriber_connection *conn,
const uint8_t* data, uint16_t len,
struct handover_in_req *req)
{
/* § 3.2.2.58: Information contained here shall take precedence over
duplicate information from Information Elements in the HANDOVER
REQUEST as long as the coding is understood by the new BSS */
/* § 3.2.2.58: <<Reception of an erroneous "Old BSS to New BSS
information" shall not cause a rejection of the HANDOVER REQUEST
message; the "Old BSS to New BSS information" information element
shall be discarded and the handover resource allocation procedure
shall continue>>. See also 3.1.19.7. */
struct tlv_parsed tp;
if (tlv_parse(&tp, &gsm0808_old_bss_to_new_bss_info_att_tlvdef, data, len, 0, 0) <= 0) {
LOG_HO(conn, LOGL_NOTICE, "Failed to parse IE \"Old BSS to New BSS information\"\n");
return;
}
if (TLVP_VAL(&tp, GSM0808_FE_IE_LAST_USED_EUTRAN_PLMN_ID)) {
req->last_eutran_plmn_valid = true;
osmo_plmn_from_bcd(TLVP_VAL(&tp, GSM0808_FE_IE_LAST_USED_EUTRAN_PLMN_ID),
&req->last_eutran_plmn);
}
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
/* 3GPP TS 48.008 § 3.2.1.8 Handover Request */
static bool parse_ho_request(struct gsm_subscriber_connection *conn, const struct msgb *msg,
struct handover_in_req *req)
{
struct tlv_parsed tp_arr[2];
struct tlv_parsed *tp = &tp_arr[0];
struct tlv_parsed *tp2 = &tp_arr[1];
struct tlv_p_entry *e;
int payload_length;
bool aoip = gscon_is_aoip(conn);
bool sccplite = gscon_is_sccplite(conn);
support A5/4 in inter-BSC Handover inter-BSC into this BSC: from BSSMAP Handover Request, parse and store Kc128. All else is already implemented: depending on the chosen encryption algorithm, Kc128 will end up in the Channel Activation. inter-BSC out of this BSC: nothing is needed to support A5/4, the BSSMAP Handover Required message does not contain any encryption related information. The MSC already knows the chosen algorithm. Related: SYS#5324 Change-Id: I7e9590e8c96aa50086148863ad9a2741b978e614
2021-06-14 23:10:39 +00:00
bool has_a54 = false;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if ((aoip && sccplite) || !(aoip || sccplite)) {
LOG_HO(conn, LOGL_ERROR, "Received BSSMAP Handover Request, but conn is not"
" marked as exactly one of AoIP or SCCPlite\n");
return false;
}
payload_length = msg->tail - msg->l4h;
if (tlv_parse2(tp_arr, 2, gsm0808_att_tlvdef(), msg->l4h + 1, payload_length - 1, 0, 0) <= 0) {
LOG_HO(conn, LOGL_ERROR, "Failed to parse IEs\n");
return false;
}
if (!(e = TLVP_GET(tp, GSM0808_IE_CHANNEL_TYPE))) {
LOG_HO(conn, LOGL_ERROR, "Missing Channel Type IE\n");
return false;
}
if (gsm0808_dec_channel_type(&req->ct, e->val, e->len) <= 0) {
LOG_HO(conn, LOGL_ERROR, "Failed to parse Channel Type IE\n");
return false;
}
if (!(e = TLVP_GET(tp, GSM0808_IE_ENCRYPTION_INFORMATION))) {
LOG_HO(conn, LOGL_ERROR, "Missing Encryption Information IE\n");
return false;
}
if (gsm0808_dec_encrypt_info(&req->ei, e->val, e->len) <= 0) {
LOG_HO(conn, LOGL_ERROR, "Failed to parse Encryption Information IE\n");
return false;
}
fix inter-BSC-in handover encryption In the field we saw Handover Requests without any Chosen Encryption Algorithm IE, and osmo-bsc completely failed on those. This made me understand my mistake from when I wrote this handover code. So far, from a BSSMAP Handover Request, we (I) used only the Chosen Encryption Algorithm IE to pick the encryption to use on the target lchan. That is very wrong. Instead, figure out the intersection of permitted algorithms MSC & BSC, and pick the best of those. Which means, actually, completely ignore the Chosen Encryption Algorithm IE. In the message, the permitted algorithms are passed as a bitmask. The current code using gsm0808_dec_encrypt_info() passes this on as an array. In order to select_best_cipher(), I could convert that array back to a bitmask. Instead pass the bitmask on from message decoding alongside the struct gsm0808_encrypt_info in req->ei_as_bitmask. In handover_end(), change the condition so that we can also pass HO_RESULT_FAIL_RR_HO_FAIL to emit a Handover Failure. Related: SYS#5839 Change-Id: Iffedc981b60d309ed2e5decd5efedee07a757b53
2022-02-16 14:53:13 +00:00
req->ei_as_bitmask = *e->val;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
support A5/4 in inter-BSC Handover inter-BSC into this BSC: from BSSMAP Handover Request, parse and store Kc128. All else is already implemented: depending on the chosen encryption algorithm, Kc128 will end up in the Channel Activation. inter-BSC out of this BSC: nothing is needed to support A5/4, the BSSMAP Handover Required message does not contain any encryption related information. The MSC already knows the chosen algorithm. Related: SYS#5324 Change-Id: I7e9590e8c96aa50086148863ad9a2741b978e614
2021-06-14 23:10:39 +00:00
if ((e = TLVP_GET(tp, GSM0808_IE_KC_128))) {
if (e->len != 16) {
LOG_HO(conn, LOGL_ERROR, "Invalid length in Kc128 IE: %u bytes (expected 16)\n", e->len);
return false;
}
memcpy(req->kc128, e->val, 16);
req->kc128_present = true;
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if ((e = TLVP_GET(tp, GSM0808_IE_CLASSMARK_INFORMATION_TYPE_1))) {
if (e->len != sizeof(req->classmark.classmark1)) {
LOG_HO(conn, LOGL_ERROR, "Classmark Information 1 has wrong size\n");
return false;
}
req->classmark.classmark1 = *(struct gsm48_classmark1*)e->val;
req->classmark.classmark1_set = true;
} else if ((e = TLVP_GET(tp, GSM0808_IE_CLASSMARK_INFORMATION_T2))) {
uint8_t len = OSMO_MIN(sizeof(req->classmark.classmark2),
e->len);
if (!len) {
LOG_HO(conn, LOGL_ERROR, "Classmark Information 2 has zero size\n");
return false;
}
memcpy(&req->classmark.classmark2, e->val, len);
req->classmark.classmark2_len = len;
inter-BSC HO incoming: continue despite missing Classmark 3GPP mandates either Classmark Information 1 or 2 in BSSMAP Handover Request, but an SCCPlite MSC currently tested does not pass either of them. Make this missing IE a non-fatal error, continuing anyway should work out. See 3GPP TS 48.008, 3.2.1.8 HANDOVER REQUEST, where it says "Classmark Information 1 or Classmark Information 2" with note 6: "One of these two elements is sent." Change-Id: I34d64b028210b4df8652fee1a8830ec4a4e3ac11
2018-08-27 19:49:18 +00:00
} else
LOG_HO(conn, LOGL_INFO,
"Missing mandatory IE: 3GPP mandates either Classmark Information 1 or 2"
" in BSSMAP Handover Request, but neither are present. Will continue without.\n");
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
Handover Request: also parse Chosen Algorithm IE, pass to lchan activation During inter-BSC-incoming, the MSC sends the chosen encryption algorithm in the Handover Request message. Actually parse this Chosen Encryption Algorithm IE. Place the chosen algorithm and the CK into lchan_activate_info->encr so that the new lchan will use the same ciphering on this new BSS as it did on the old BSS. Change-Id: I5b269f50bd2092516bfdf87746196983d3ac49d1
2019-03-15 01:48:39 +00:00
if ((e = TLVP_GET(tp, GSM0808_IE_CHOSEN_ENCR_ALG))) {
req->chosen_encr_alg = e->val[0];
if (req->chosen_encr_alg < 1 || req->chosen_encr_alg > 8)
LOG_HO(conn, LOGL_ERROR, "Chosen Encryption Algorithm (Serving) is invalid: %u\n",
req->chosen_encr_alg);
}
support A5/4 in inter-BSC Handover inter-BSC into this BSC: from BSSMAP Handover Request, parse and store Kc128. All else is already implemented: depending on the chosen encryption algorithm, Kc128 will end up in the Channel Activation. inter-BSC out of this BSC: nothing is needed to support A5/4, the BSSMAP Handover Required message does not contain any encryption related information. The MSC already knows the chosen algorithm. Related: SYS#5324 Change-Id: I7e9590e8c96aa50086148863ad9a2741b978e614
2021-06-14 23:10:39 +00:00
LOG_HO(conn, LOGL_DEBUG, "Handover Request encryption info: chosen=A5/%u key=%s kc128=%s\n",
(req->chosen_encr_alg ? : 1) - 1,
req->ei.key_len ? osmo_hexdump_nospc(req->ei.key, req->ei.key_len) : "none",
has_a54 ? osmo_hexdump_nospc(req->kc128, 16) : "none");
Handover Request: also parse Chosen Algorithm IE, pass to lchan activation During inter-BSC-incoming, the MSC sends the chosen encryption algorithm in the Handover Request message. Actually parse this Chosen Encryption Algorithm IE. Place the chosen algorithm and the CK into lchan_activate_info->encr so that the new lchan will use the same ciphering on this new BSS as it did on the old BSS. Change-Id: I5b269f50bd2092516bfdf87746196983d3ac49d1
2019-03-15 01:48:39 +00:00
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if (TLVP_PRESENT(tp, GSM0808_IE_AOIP_TRASP_ADDR)) {
int rc;
unsigned int u;
struct sockaddr_storage msc_rtp_sa;
if (!aoip) {
LOG_HO(conn, LOGL_ERROR,
"BSSMAP Handover Request contains AoIP Transport Address,"
" but this is not an AoIP connection\n");
return false;
}
rc = gsm0808_dec_aoip_trasp_addr(&msc_rtp_sa,
TLVP_VAL(tp, GSM0808_IE_AOIP_TRASP_ADDR),
TLVP_LEN(tp, GSM0808_IE_AOIP_TRASP_ADDR));
if (rc < 0) {
LOG_HO(conn, LOGL_ERROR, "Unable to decode AoIP Transport Address.\n");
return false;
}
u = osmo_sockaddr_to_str_and_uint(req->msc_assigned_rtp_addr,
sizeof(req->msc_assigned_rtp_addr),
&req->msc_assigned_rtp_port,
(const struct sockaddr*)&msc_rtp_sa);
if (!u || u >= sizeof(req->msc_assigned_rtp_addr)) {
LOG_HO(conn, LOGL_ERROR, "MSC's RTP address is too long\n");
return false;
}
} else if (aoip) {
LOG_HO(conn, LOGL_ERROR,
"BSSMAP Handover Request lacks AoIP Transport Address on an AoIP connection\n");
return false;
}
/* The Cell Identifier (Serving) and Cell Identifier (Target) are both 3.2.2.17 and are
* identified by the same tag. So get one from tp and the other from tp2. */
if (!(e = TLVP_GET(tp, GSM0808_IE_CELL_IDENTIFIER))) {
LOG_HO(conn, LOGL_ERROR, "Missing IE: Cell Identifier (Serving)\n");
return false;
}
if (gsm0808_dec_cell_id(&req->cell_id_serving, e->val, e->len) < 0) {
LOG_HO(conn, LOGL_ERROR, "Invalid IE: Cell Identifier (Serving)\n");
return false;
}
/* LOG_HO() also calls gsm0808_cell_id_name(), so to be able to use gsm0808_cell_id_name() in
* logging without getting mixed up with those static buffers, store the result. */
handover_fsm.c: Fix -Werror=format-security errors When building with -Werror=format-security, such as our OBS builds, it fails like this: [ 118s] handover_fsm.c: In function 'parse_ho_request': [ 118s] handover_fsm.c:478:4: error: format not a string literal and no format arguments [-Werror=format-security] [ 118s] gsm0808_cell_id_name(&req->cell_id_serving)); [ 118s] ^~~~~~~~~~~~~~~~~~~~ [ 118s] handover_fsm.c:489:4: error: format not a string literal and no format arguments [-Werror=format-security] [ 118s] gsm0808_cell_id_name(&req->cell_id_target)); [ 118s] ^~~~~~~~~~~~~~~~~~~~ [ 120s] cc1: some warnings being treated as errors Let's make sure we don't call sprintf() and friends without a format string. In fact, if we only want to copy a string without extra formatting, use osmo_strlcpy() or OSMO_STRLCPY_ARRAY(). Change-Id: I56cff3618f012f6b019f4fca7e2768814487137a
2018-08-01 16:35:34 +00:00
OSMO_STRLCPY_ARRAY(req->cell_id_serving_name, gsm0808_cell_id_name(&req->cell_id_serving));
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if (!(e = TLVP_GET(tp2, GSM0808_IE_CELL_IDENTIFIER))) {
LOG_HO(conn, LOGL_ERROR, "Missing IE: Cell Identifier (Target)\n");
return false;
}
if (gsm0808_dec_cell_id(&req->cell_id_target, e->val, e->len) < 0) {
LOG_HO(conn, LOGL_ERROR, "Invalid IE: Cell Identifier (Target)\n");
return false;
}
handover_fsm.c: Fix -Werror=format-security errors When building with -Werror=format-security, such as our OBS builds, it fails like this: [ 118s] handover_fsm.c: In function 'parse_ho_request': [ 118s] handover_fsm.c:478:4: error: format not a string literal and no format arguments [-Werror=format-security] [ 118s] gsm0808_cell_id_name(&req->cell_id_serving)); [ 118s] ^~~~~~~~~~~~~~~~~~~~ [ 118s] handover_fsm.c:489:4: error: format not a string literal and no format arguments [-Werror=format-security] [ 118s] gsm0808_cell_id_name(&req->cell_id_target)); [ 118s] ^~~~~~~~~~~~~~~~~~~~ [ 120s] cc1: some warnings being treated as errors Let's make sure we don't call sprintf() and friends without a format string. In fact, if we only want to copy a string without extra formatting, use osmo_strlcpy() or OSMO_STRLCPY_ARRAY(). Change-Id: I56cff3618f012f6b019f4fca7e2768814487137a
2018-08-01 16:35:34 +00:00
OSMO_STRLCPY_ARRAY(req->cell_id_target_name, gsm0808_cell_id_name(&req->cell_id_target));
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if ((e = TLVP_GET(tp, GSM0808_IE_CIRCUIT_IDENTITY_CODE))) {
/* CIC is permitted in both AoIP and SCCPlite */
req->msc_assigned_cic = osmo_load16be(e->val);
} else if (sccplite) {
/* no CIC but SCCPlite: illegal */
LOG_HO(conn, LOGL_ERROR, "SCCPlite MSC, but no CIC in incoming inter-BSC Handover\n");
return false;
}
SRVCC: Parse Last Used E-UTRAN PLMN Id in Handover Request Whenever SRVCC EUTRAN->GERAN is performed by the CN, it will set the Last Used E-UTRAN PLMN Id in order for the BSS to inform the MS about EUTRAN neighbors once the call is over. The last part (sending EUTRAN neighs) is already implemented, since same thing is done as per CSFB. However, we lacked the first part, where the EUTRAN PLMN Id is recorded for later use. Actually, in both cases, we end up building the list of neighbors without taking into accound the PLMN value (hence no filtering of configured neighs), but it only sends such a list if any PLMN was stored there, which means this patch is still necessary for a quick fallback to 4G after the call is over. Related: SYS#5337 Depends: libosmocore.git Change-Id I0e55e947b6fef6dad0cf1a6c16b781bef4cc76c5 Change-Id: Ia5008f11a4c36ef8085a2037d4abddd131086e6e
2021-04-14 15:14:07 +00:00
if ((e = TLVP_GET(tp, GSM0808_IE_OLD_BSS_TO_NEW_BSS_INFORMATION))) {
parse_old2new_bss_info(conn, e->val, e->len, req);
}
inter-BSC incoming HO: store Codec List (MSC Preferred) So far we completely ignore the codec list from the MSC in Handover Request messages. This leads to error messages in subsequent handovers because there is no Codec List stored on the conn: DHODEC ERROR handover_decision_2.c:390 [...] No Speech Codec List present, accepting all codecs Besides the error log, in hodec2 we may subsequently take bogus or unexpected codec decisions, ignoring the MSC's choice of codecs, or in the worst case picking an unsupported codec. This also has implications on what type of lchan we choose for handover target in hodec2: say, if no half rate codec is supported as per the MSC's request, we normally avoid handover to a TCH/H, etc. Intra-BSC HO after an Inter-BSC incoming HO is the only case where this problem occurs, in every other scenario there is an Assignment Request from the MSC, from which we properly store the MSC's codec list. 3GPP TS 48.008 does indicate that on AoIP this codec list shall be included. So reject HO Request with missing Codec List, as we already do for Assignment Request on AoIP. This makes TTCN3 BSC_Tests for inter-BSC incoming HO fail, because our tests so far omit the Codec List (MSC Preferred) on AoIP. The related fix of the tests is If06de9c9b43d79f749447a4e2a340176eef75c79. Related: SYS#5839 Depends: If06de9c9b43d79f749447a4e2a340176eef75c79 (osmo-ttcn3-hacks) Change-Id: I117cc29d6d11db77d160de654f43f5993db6ee21
2022-03-03 22:26:38 +00:00
/* Decode "Codec List (MSC Preferred)". First set len = 0 to empty the list. (For inter-BSC incoming handover,
* there can't possibly be a list here already, because the conn has just now been created; just do ensure
* sanity.) */
conn->codec_list = (struct gsm0808_speech_codec_list){};
if ((e = TLVP_GET(tp, GSM0808_IE_SPEECH_CODEC_LIST))) {
if (gsm0808_dec_speech_codec_list(&conn->codec_list, e->val, e->len) < 0) {
LOG_HO(conn, LOGL_ERROR, "incoming inter-BSC Handover: HO Request:"
" Unable to decode Codec List (MSC Preferred)\n");
return false;
}
}
if (aoip && !conn->codec_list.len) {
LOG_HO(conn, LOGL_ERROR, "incoming inter-BSC Handover: HO Request:"
" Invalid or empty Codec List (MSC Preferred)\n");
return false;
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
/* A lot of IEs remain ignored... */
return true;
}
static bool chan_mode_is_tch(enum gsm48_chan_mode mode)
{
ensure chan_mode comparisons in non-VAMOS mode Both VAMOS- and non-VAMOS speech modes should result in indentical voice handling. So make sure that all chan_modes are converted to non-vamos before comparing / evaluating in switch statements. Change-Id: I791e7966b1f8eaa3299a8a46abeb313cf5136e0b
2021-05-28 17:18:11 +00:00
switch (gsm48_chan_mode_to_non_vamos(mode)) {
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case GSM48_CMODE_SPEECH_V1:
case GSM48_CMODE_SPEECH_EFR:
case GSM48_CMODE_SPEECH_AMR:
return true;
default:
return false;
}
}
void handover_start_inter_bsc_in(struct gsm_subscriber_connection *conn,
struct msgb *ho_request_msg)
{
struct lchan_activate_info info;
struct handover *ho = &conn->ho;
struct bsc_msc_data *msc = conn->sccp.msc;
struct handover_in_req *req = &ho->inter_bsc_in;
int match_idx;
struct osmo_fsm_inst *fi;
assignment_fsm: fix channel allocator preferences When the MSC allocates a channel through the ASSIGNMENT REQUEST, it may ask for a TCH/H and a TCH/F at the same time and tell which of the two types it prefers. The process of channel allocation currently selects, based on the BTS, MSC and MS capabilites exactly one apropriate codec/rate (e.g. TCH/H) and then tries to allocate it. If that allocation fails, there is no way to try the second choice and the assignment fails. For example: The MSC asks for TCH/F and TCH/H, prefering TCH/F, then the channel allocator will try TCH/F and if it fails (all TCH/F are currently in use), then TCH/H is never tried. Since the BSC currently only trys the first best codec/rate that is supported it also ignores the preference. Lets fix those problems by including the preference information and both possible codec/rate settings into the channel allocation decision. Change-Id: I5239e05c1cfbcb8af28f43373a58fa6c2d216c51 Related: OS#3503
2019-01-22 10:29:06 +00:00
struct channel_mode_and_rate ch_mode_rate = {};
fix inter-BSC-in handover encryption In the field we saw Handover Requests without any Chosen Encryption Algorithm IE, and osmo-bsc completely failed on those. This made me understand my mistake from when I wrote this handover code. So far, from a BSSMAP Handover Request, we (I) used only the Chosen Encryption Algorithm IE to pick the encryption to use on the target lchan. That is very wrong. Instead, figure out the intersection of permitted algorithms MSC & BSC, and pick the best of those. Which means, actually, completely ignore the Chosen Encryption Algorithm IE. In the message, the permitted algorithms are passed as a bitmask. The current code using gsm0808_dec_encrypt_info() passes this on as an array. In order to select_best_cipher(), I could convert that array back to a bitmask. Instead pass the bitmask on from message decoding alongside the struct gsm0808_encrypt_info in req->ei_as_bitmask. In handover_end(), change the condition so that we can also pass HO_RESULT_FAIL_RR_HO_FAIL to emit a Handover Failure. Related: SYS#5839 Change-Id: Iffedc981b60d309ed2e5decd5efedee07a757b53
2022-02-16 14:53:13 +00:00
int chosen_a5_n;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
handover_fsm_alloc(conn);
*ho = (struct handover){
.fi = ho->fi,
.from_hodec_id = HODEC_REMOTE,
.scope = HO_INTER_BSC_IN,
.ho_ref = g_next_ho_ref++,
.async = true,
};
fi = ho->fi;
ho_fsm_update_id(fi, "interBSCin");
if (!parse_ho_request(conn, ho_request_msg, req)) {
fix extraneous newlines in ho_fail() invocations The ho_fail() macro includes a newline, so the callers should not add one. Fix these cases where the extra '\n' fragments the logged message. Related: SYS#5839 Change-Id: Ifdbce98be70c1aa127ae008d7a77b9795fd250d3
2022-03-03 22:55:36 +00:00
ho_fail(HO_RESULT_ERROR, "Invalid Handover Request message from MSC");
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
return;
}
/* Figure out which cell to handover to. */
for (match_idx = 0; ; match_idx++) {
struct gsm_bts *bts;
struct gsm_lchan *lchan;
bts = gsm_bts_by_cell_id(conn->network, &req->cell_id_target,
match_idx);
/* Did we iterate all matches? */
if (!bts)
break;
LOG_HO(conn, LOGL_DEBUG, "BTS %u matches cell id %s\n",
bts->nr, req->cell_id_target_name);
/* Figure out channel type */
assignment_fsm: fix channel allocator preferences When the MSC allocates a channel through the ASSIGNMENT REQUEST, it may ask for a TCH/H and a TCH/F at the same time and tell which of the two types it prefers. The process of channel allocation currently selects, based on the BTS, MSC and MS capabilites exactly one apropriate codec/rate (e.g. TCH/H) and then tries to allocate it. If that allocation fails, there is no way to try the second choice and the assignment fails. For example: The MSC asks for TCH/F and TCH/H, prefering TCH/F, then the channel allocator will try TCH/F and if it fails (all TCH/F are currently in use), then TCH/H is never tried. Since the BSC currently only trys the first best codec/rate that is supported it also ignores the preference. Lets fix those problems by including the preference information and both possible codec/rate settings into the channel allocation decision. Change-Id: I5239e05c1cfbcb8af28f43373a58fa6c2d216c51 Related: OS#3503
2019-01-22 10:29:06 +00:00
if (match_codec_pref(&ch_mode_rate, &req->ct, &req->scl, msc, bts, RATE_PREF_NONE)) {
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
LOG_HO(conn, LOGL_DEBUG,
handover_fsm: fix missing newline for log statement Change-Id: I41c04cfedaae4da69a2bc7d50b1f7fe0e467e0fa
2018-10-29 17:37:34 +00:00
"BTS %u has no matching channel codec (%s, speech codec list len = %u)\n",
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
bts->nr, gsm0808_channel_type_name(&req->ct), req->scl.len);
continue;
}
LOG_HO(conn, LOGL_DEBUG, "BTS %u: Found matching audio type: %s %s (for %s)\n",
assignment_fsm: Properly support assigning signalling mode TCH/x To support the 3 possible preferences, the changes needed were: - Replace 'full_rate' bool with a 3 option enum to represent the channels types for signalling - Switch from _pref/_alt to using an array sorted in preference order Originally merged as Change-Id I4c7499c8c866ea3ff7b1327edb3615d003d927d3, reverted because the change broke voice calls. Re-submitting with the fix: don't forget to set conn->assignment.requires_voice_stream. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Change-Id: I7513d2cbe8b695ba6f031ad11560c63a6535cf2d
2019-03-07 15:32:02 +00:00
bts->nr, gsm48_chan_mode_name(ch_mode_rate.chan_mode),
ch_mode_rate.chan_rate == CH_RATE_FULL ? "full-rate" : "half-rate",
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
gsm0808_channel_type_name(&req->ct));
lchan_select: allow different alloc order for assignment and handover A follow-up patch implements a special channel allocation mode, which is only working for assignment (basically TCH selection for a voice call). This mode cannot be employed for initial CHANNEL REQUEST or handover due to the absence of an already established lchan. Adding this mode to the existing VTY command syntax would be confusing: channel allocator (ascending|desscending|dynamic) ^^^^^^^ so this patch extends the VTY syntax in a way that it becomes possible to configure different channel allocator modes for different cases: OsmoBSC(config-net-bts)# channel allocator mode ? set-all Set a single mode for all variants chan-req Channel allocation for CHANNEL REQUEST (RACH) assignment Channel allocation for assignment handover Channel allocation for handover The old command syntax, which is basically 'set-all', is kept for backwards compatibility, but marked as deprecated. Change-Id: I3ae73b36ee9433cc768376b56f0765e5f416162f Related: SYS#5460
2022-06-05 19:43:28 +00:00
lchan = lchan_select_by_chan_mode(bts,
ch_mode_rate.chan_mode,
ch_mode_rate.chan_rate,
lchan_select: implement dynamic selection mode for assignment This change implements an additional channel allocation mode, which can be employed during a TCH channel allocation for assignment. Selection between ascending and descending order is performed depending on pre-configured parameters: * Uplink RxLev threshold and number of samples for averaging, * C0 (BCCH carrier) channel load threshold. This is useful in setups where Tx power of the RF carriers cannot be adjusted +dynamically at run-time and thus BS Power Control cannot be performed. In such setups the BCCH carrier is transmitting at relatively higher power than the other RF carriers. The key idea is to allocate channels in a smarter way, so that UEs with poor signal would get channels on carriers with high Tx power, while UEs with good signal could use carriers with lower Tx power. Change-Id: I1b7a0d706976b73cc5c30a8714b830811addfe8d Related: osmo-ttcn3-hacks.git Ia522f37c1c001b3a36f5145b8875fbb88311c2e5 Related: SYS#5460
2022-06-15 19:10:16 +00:00
SELECT_FOR_HANDOVER, NULL);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if (!lchan) {
LOG_HO(conn, LOGL_DEBUG, "BTS %u has no matching free channels\n", bts->nr);
continue;
}
/* Found a match. */
ho->new_bts = bts;
ho->new_lchan = lchan;
break;
}
fix 'handover:*' counters: add missing / move increments Move initial 'handover:attempted' counts from bsc_subscr_conn_fsm.c to handover_fsm.c, where all the other counters are handled. Add missing increments for the overall 'handover:*' counts. Related: OS#4736 Change-Id: I783bdedafc0eb8f2df9ea100792846fecc7ccbf7
2020-08-29 02:21:36 +00:00
ho_count(ho->new_bts, CTR_HANDOVER_ATTEMPTED);
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
ho_count(ho->new_bts, CTR_INTER_BSC_HO_IN_ATTEMPTED);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
if (!ho->new_bts) {
ho_fail(HO_RESULT_ERROR, "No local cell matches the target %s",
req->cell_id_target_name);
return;
}
if (!ho->new_lchan) {
handover_fsm: fix failure logging of uninitialized chan mode The chan mode is figured out per-BTS, but may remain uninitialized. Rather log info about the channel request, like further above. Change-Id: I07b89b6101879fb7c070c87be9bd38cc05ffa0b1
2018-10-29 17:38:09 +00:00
ho_fail(HO_RESULT_ERROR, "No free/matching lchan found for %s %s (speech codec list len = %u)",
req->cell_id_target_name, gsm0808_channel_type_name(&req->ct), req->scl.len);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
return;
}
/* Just for completeness' sake, maybe some logging uses it? */
ho->new_lchan_type = ho->new_lchan->type;
ho_fsm_state_chg(HO_ST_WAIT_LCHAN_ACTIVE);
info = (struct lchan_activate_info){
cosmetic: rename FOR_* to ACTIVATE_FOR_* Soon, there will also be enums with ASSIGNMENT_FOR_* and MODIFY_FOR_* naming. Add the ACTIVATE_ prefix to the existing enum to clarify. Change-Id: I12190d4d154a1da6a9ebc9a755ccc2fe382ff188
2021-05-10 15:47:46 +00:00
.activ_for = ACTIVATE_FOR_HANDOVER,
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
.for_conn = conn,
make sure channel mode and s15_s0 are updated only after an ACK I noticed during testing that an lchan used as TCH/F in fact still had its channel mode set to Signalling -- because on Assignment, the Speech mode used to be placed in the *previous* lchan and the new lchan was never updated after the Activ ACK. This is unbearable confusion which I complained about numerous times, so far mostly for cosmetic reasons. But implementing re-assignment properly actually requires this to be cleaned up. Keep all volatile chan mode settings in lchan->activate.* or lchan->modify.*, and only update lchan->* members when an ACK has been received for those settings. So a failed request keeps a sane state. Make sure that those settings are in fact updated in the proper lchan, upon an ACK, so that subsequent re-assignment or mode-modify know the accurate lchan state. Related are upcoming patches that sort out the AMR multirate configuration in a similar fashion, see Iebac2dc26412d877e5364f90d6f2ed7a7952351e Ia7519d2fa9e7f0b61b222d27d077bde4660c40b9 Ie57f9d0e3912632903d9740291225bfd1634ed47. Related: SYS#5315 OS#4940 OS#3787 OS#3833 Change-Id: Ie0da36124d73efc28a8809b63d7c96e2167fc412
2021-04-27 23:17:14 +00:00
.ch_mode_rate = ch_mode_rate,
assignment_fsm: fix channel allocator preferences When the MSC allocates a channel through the ASSIGNMENT REQUEST, it may ask for a TCH/H and a TCH/F at the same time and tell which of the two types it prefers. The process of channel allocation currently selects, based on the BTS, MSC and MS capabilites exactly one apropriate codec/rate (e.g. TCH/H) and then tries to allocate it. If that allocation fails, there is no way to try the second choice and the assignment fails. For example: The MSC asks for TCH/F and TCH/H, prefering TCH/F, then the channel allocator will try TCH/F and if it fails (all TCH/F are currently in use), then TCH/H is never tried. Since the BSC currently only trys the first best codec/rate that is supported it also ignores the preference. Lets fix those problems by including the preference information and both possible codec/rate settings into the channel allocation decision. Change-Id: I5239e05c1cfbcb8af28f43373a58fa6c2d216c51 Related: OS#3503
2019-01-22 10:29:06 +00:00
.requires_voice_stream = chan_mode_is_tch(ch_mode_rate.chan_mode),
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
.msc_assigned_cic = req->msc_assigned_cic,
};
fix inter-BSC-in handover encryption In the field we saw Handover Requests without any Chosen Encryption Algorithm IE, and osmo-bsc completely failed on those. This made me understand my mistake from when I wrote this handover code. So far, from a BSSMAP Handover Request, we (I) used only the Chosen Encryption Algorithm IE to pick the encryption to use on the target lchan. That is very wrong. Instead, figure out the intersection of permitted algorithms MSC & BSC, and pick the best of those. Which means, actually, completely ignore the Chosen Encryption Algorithm IE. In the message, the permitted algorithms are passed as a bitmask. The current code using gsm0808_dec_encrypt_info() passes this on as an array. In order to select_best_cipher(), I could convert that array back to a bitmask. Instead pass the bitmask on from message decoding alongside the struct gsm0808_encrypt_info in req->ei_as_bitmask. In handover_end(), change the condition so that we can also pass HO_RESULT_FAIL_RR_HO_FAIL to emit a Handover Failure. Related: SYS#5839 Change-Id: Iffedc981b60d309ed2e5decd5efedee07a757b53
2022-02-16 14:53:13 +00:00
/* Figure out the encryption algorithm */
chosen_a5_n = select_best_cipher(req->ei_as_bitmask, bsc_gsmnet->a5_encryption_mask);
if (chosen_a5_n < 0) {
ho_fail(HO_RESULT_FAIL_RR_HO_FAIL,
fix extraneous newlines in ho_fail() invocations The ho_fail() macro includes a newline, so the callers should not add one. Fix these cases where the extra '\n' fragments the logged message. Related: SYS#5839 Change-Id: Ifdbce98be70c1aa127ae008d7a77b9795fd250d3
2022-03-03 22:55:36 +00:00
"There is no A5 encryption mode that both BSC and MSC permit: MSC 0x%x & BSC 0x%x = 0",
fix inter-BSC-in handover encryption In the field we saw Handover Requests without any Chosen Encryption Algorithm IE, and osmo-bsc completely failed on those. This made me understand my mistake from when I wrote this handover code. So far, from a BSSMAP Handover Request, we (I) used only the Chosen Encryption Algorithm IE to pick the encryption to use on the target lchan. That is very wrong. Instead, figure out the intersection of permitted algorithms MSC & BSC, and pick the best of those. Which means, actually, completely ignore the Chosen Encryption Algorithm IE. In the message, the permitted algorithms are passed as a bitmask. The current code using gsm0808_dec_encrypt_info() passes this on as an array. In order to select_best_cipher(), I could convert that array back to a bitmask. Instead pass the bitmask on from message decoding alongside the struct gsm0808_encrypt_info in req->ei_as_bitmask. In handover_end(), change the condition so that we can also pass HO_RESULT_FAIL_RR_HO_FAIL to emit a Handover Failure. Related: SYS#5839 Change-Id: Iffedc981b60d309ed2e5decd5efedee07a757b53
2022-02-16 14:53:13 +00:00
req->ei_as_bitmask, bsc_gsmnet->a5_encryption_mask);
return;
}
if (chosen_a5_n > 0 && !req->ei.key_len) {
/* There is no key. Is A5/0 permitted? */
if ((req->ei_as_bitmask & bsc_gsmnet->a5_encryption_mask & 0x1) == 0x1) {
chosen_a5_n = 0;
} else {
ho_fail(HO_RESULT_ERROR,
"Encryption is required, but there is no key (Encryption Information)");
Handover Request: also parse Chosen Algorithm IE, pass to lchan activation During inter-BSC-incoming, the MSC sends the chosen encryption algorithm in the Handover Request message. Actually parse this Chosen Encryption Algorithm IE. Place the chosen algorithm and the CK into lchan_activate_info->encr so that the new lchan will use the same ciphering on this new BSS as it did on the old BSS. Change-Id: I5b269f50bd2092516bfdf87746196983d3ac49d1
2019-03-15 01:48:39 +00:00
return;
}
}
fix inter-BSC-in handover encryption In the field we saw Handover Requests without any Chosen Encryption Algorithm IE, and osmo-bsc completely failed on those. This made me understand my mistake from when I wrote this handover code. So far, from a BSSMAP Handover Request, we (I) used only the Chosen Encryption Algorithm IE to pick the encryption to use on the target lchan. That is very wrong. Instead, figure out the intersection of permitted algorithms MSC & BSC, and pick the best of those. Which means, actually, completely ignore the Chosen Encryption Algorithm IE. In the message, the permitted algorithms are passed as a bitmask. The current code using gsm0808_dec_encrypt_info() passes this on as an array. In order to select_best_cipher(), I could convert that array back to a bitmask. Instead pass the bitmask on from message decoding alongside the struct gsm0808_encrypt_info in req->ei_as_bitmask. In handover_end(), change the condition so that we can also pass HO_RESULT_FAIL_RR_HO_FAIL to emit a Handover Failure. Related: SYS#5839 Change-Id: Iffedc981b60d309ed2e5decd5efedee07a757b53
2022-02-16 14:53:13 +00:00
/* Put encryption info in the chan activation info */
struct gsm_encr: store alg_id in human-readable format I find it weird that we store the A5 algorithm ID in a format that is used on the wire: N + 1 (valid for both A-bis and A interfaces). What confused me even more is that in some functions we print it as if it was in a normal, human-readable format. And this is also why one can see weird constructions like: if (lchan->encr.alg_id > ALG_A5_NR_TO_RSL(0)) { ... } Let's ensure that our internal structures use the A5/N format: alg_id=0: A5/0 (0x01 on the A-bis/A interface) alg_id=1: A5/1 (0x02 on the A-bis/A interface) alg_id=2: A5/2 (0x03 on the A-bis/A interface) ... alg_id=7: A5/7 (0x08 on the A-bis/A interface) so that we can print and compare the value of alg_id without using additional arithmetics. Let's also rename 'alg_id' to 'alg_a5_n' as it most clearly indicates which representation it is storing. This is how the above code snippet would look like: if (lchan->encr.alg_a5_n > 0) { ... } Change-Id: Ieb50c9a352cfa5481aebac2379e0a461663543ec
2022-03-13 22:01:53 +00:00
info.encr.alg_a5_n = chosen_a5_n;
fix inter-BSC-in handover encryption In the field we saw Handover Requests without any Chosen Encryption Algorithm IE, and osmo-bsc completely failed on those. This made me understand my mistake from when I wrote this handover code. So far, from a BSSMAP Handover Request, we (I) used only the Chosen Encryption Algorithm IE to pick the encryption to use on the target lchan. That is very wrong. Instead, figure out the intersection of permitted algorithms MSC & BSC, and pick the best of those. Which means, actually, completely ignore the Chosen Encryption Algorithm IE. In the message, the permitted algorithms are passed as a bitmask. The current code using gsm0808_dec_encrypt_info() passes this on as an array. In order to select_best_cipher(), I could convert that array back to a bitmask. Instead pass the bitmask on from message decoding alongside the struct gsm0808_encrypt_info in req->ei_as_bitmask. In handover_end(), change the condition so that we can also pass HO_RESULT_FAIL_RR_HO_FAIL to emit a Handover Failure. Related: SYS#5839 Change-Id: Iffedc981b60d309ed2e5decd5efedee07a757b53
2022-02-16 14:53:13 +00:00
if (chosen_a5_n > 0) {
Handover Request: also parse Chosen Algorithm IE, pass to lchan activation During inter-BSC-incoming, the MSC sends the chosen encryption algorithm in the Handover Request message. Actually parse this Chosen Encryption Algorithm IE. Place the chosen algorithm and the CK into lchan_activate_info->encr so that the new lchan will use the same ciphering on this new BSS as it did on the old BSS. Change-Id: I5b269f50bd2092516bfdf87746196983d3ac49d1
2019-03-15 01:48:39 +00:00
if (req->ei.key_len > sizeof(info.encr.key)) {
fix extraneous newlines in ho_fail() invocations The ho_fail() macro includes a newline, so the callers should not add one. Fix these cases where the extra '\n' fragments the logged message. Related: SYS#5839 Change-Id: Ifdbce98be70c1aa127ae008d7a77b9795fd250d3
2022-03-03 22:55:36 +00:00
ho_fail(HO_RESULT_ERROR, "Encryption Information IE key length is too large: %u",
Handover Request: also parse Chosen Algorithm IE, pass to lchan activation During inter-BSC-incoming, the MSC sends the chosen encryption algorithm in the Handover Request message. Actually parse this Chosen Encryption Algorithm IE. Place the chosen algorithm and the CK into lchan_activate_info->encr so that the new lchan will use the same ciphering on this new BSS as it did on the old BSS. Change-Id: I5b269f50bd2092516bfdf87746196983d3ac49d1
2019-03-15 01:48:39 +00:00
req->ei.key_len);
handover_fsm.c: fix: prevent possible buffer overflow Change-Id: If51f8f82d3b2462cb7d7a531fe4411509344842b Fixes: CID#197643
2019-05-06 21:02:24 +00:00
return;
Handover Request: also parse Chosen Algorithm IE, pass to lchan activation During inter-BSC-incoming, the MSC sends the chosen encryption algorithm in the Handover Request message. Actually parse this Chosen Encryption Algorithm IE. Place the chosen algorithm and the CK into lchan_activate_info->encr so that the new lchan will use the same ciphering on this new BSS as it did on the old BSS. Change-Id: I5b269f50bd2092516bfdf87746196983d3ac49d1
2019-03-15 01:48:39 +00:00
}
memcpy(info.encr.key, req->ei.key, req->ei.key_len);
info.encr.key_len = req->ei.key_len;
}
support A5/4 in inter-BSC Handover inter-BSC into this BSC: from BSSMAP Handover Request, parse and store Kc128. All else is already implemented: depending on the chosen encryption algorithm, Kc128 will end up in the Channel Activation. inter-BSC out of this BSC: nothing is needed to support A5/4, the BSSMAP Handover Required message does not contain any encryption related information. The MSC already knows the chosen algorithm. Related: SYS#5324 Change-Id: I7e9590e8c96aa50086148863ad9a2741b978e614
2021-06-14 23:10:39 +00:00
if (req->kc128_present) {
memcpy(info.encr.kc128, req->kc128, 16);
info.encr.kc128_present = true;
}
SRVCC: Parse Last Used E-UTRAN PLMN Id in Handover Request Whenever SRVCC EUTRAN->GERAN is performed by the CN, it will set the Last Used E-UTRAN PLMN Id in order for the BSS to inform the MS about EUTRAN neighbors once the call is over. The last part (sending EUTRAN neighs) is already implemented, since same thing is done as per CSFB. However, we lacked the first part, where the EUTRAN PLMN Id is recorded for later use. Actually, in both cases, we end up building the list of neighbors without taking into accound the PLMN value (hence no filtering of configured neighs), but it only sends such a list if any PLMN was stored there, which means this patch is still necessary for a quick fallback to 4G after the call is over. Related: SYS#5337 Depends: libosmocore.git Change-Id I0e55e947b6fef6dad0cf1a6c16b781bef4cc76c5 Change-Id: Ia5008f11a4c36ef8085a2037d4abddd131086e6e
2021-04-14 15:14:07 +00:00
if (req->last_eutran_plmn_valid) {
Introduce VTY command to disable srvcc fast-return on target BTS Related: SYS#5337 Change-Id: I2ac91b5dffc9b6de60576aabe21a15f24fea38cb
2021-06-15 12:14:21 +00:00
conn->fast_return.allowed = ho->new_bts->srvcc_fast_return_allowed;
conn->fast_return.last_eutran_plmn_valid = true;
memcpy(&conn->fast_return.last_eutran_plmn, &req->last_eutran_plmn,
sizeof(conn->fast_return.last_eutran_plmn));
Introduce counters to track SRVCC procedures Related: SYS#5337 Change-Id: I5c20da56d465dbcf4366130394f7c42635a24cc7
2021-06-15 15:06:19 +00:00
ho_count(ho->new_bts, CTR_SRVCC_ATTEMPTED);
SRVCC: Parse Last Used E-UTRAN PLMN Id in Handover Request Whenever SRVCC EUTRAN->GERAN is performed by the CN, it will set the Last Used E-UTRAN PLMN Id in order for the BSS to inform the MS about EUTRAN neighbors once the call is over. The last part (sending EUTRAN neighs) is already implemented, since same thing is done as per CSFB. However, we lacked the first part, where the EUTRAN PLMN Id is recorded for later use. Actually, in both cases, we end up building the list of neighbors without taking into accound the PLMN value (hence no filtering of configured neighs), but it only sends such a list if any PLMN was stored there, which means this patch is still necessary for a quick fallback to 4G after the call is over. Related: SYS#5337 Depends: libosmocore.git Change-Id I0e55e947b6fef6dad0cf1a6c16b781bef4cc76c5 Change-Id: Ia5008f11a4c36ef8085a2037d4abddd131086e6e
2021-04-14 15:14:07 +00:00
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
lchan_activate(ho->new_lchan, &info);
}
cosmetic tweaks on handover counting code I was a bit confused that grep did not find HO counters being used, so let's add some comments to better explain and provide a grep hook. Related: SYS#4878 Change-Id: I242de13e657286e09428a8ca6e583d8b5155faa2
2021-11-02 09:51:56 +00:00
/* Create functions result_counter_{BSC,BTS}_{HANDOVER,...}(), to evaluate the handover result and return
* BSC_CTR_HANDOVER_ATTEMPTED,
* BSC_CTR_HANDOVER_COMPLETED,
* BSC_CTR_HANDOVER_STOPPED,
* BSC_CTR_HANDOVER_NO_CHANNEL,
* BSC_CTR_HANDOVER_TIMEOUT,
* BSC_CTR_HANDOVER_FAILED,
* BSC_CTR_HANDOVER_ERROR,
* or
* BTS_CTR_HANDOVER_ATTEMPTED,
* BTS_CTR_HANDOVER_COMPLETED,
* BTS_CTR_HANDOVER_STOPPED,
* BTS_CTR_HANDOVER_NO_CHANNEL,
* BTS_CTR_HANDOVER_TIMEOUT,
* BTS_CTR_HANDOVER_FAILED,
* BTS_CTR_HANDOVER_ERROR,
*/
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
#define FUNC_RESULT_COUNTER(obj, name) \
static int result_counter_##obj##_##name(enum handover_result result) \
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
{ \
switch (result) { \
case HO_RESULT_OK: \
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
return obj##_CTR_##name##_COMPLETED; \
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case HO_RESULT_FAIL_NO_CHANNEL: \
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
return obj##_CTR_##name##_NO_CHANNEL; \
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case HO_RESULT_FAIL_RR_HO_FAIL: \
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
return obj##_CTR_##name##_FAILED; \
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case HO_RESULT_FAIL_TIMEOUT: \
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
return obj##_CTR_##name##_TIMEOUT; \
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case HO_RESULT_CONN_RELEASE: \
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
return obj##_CTR_##name##_STOPPED; \
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
default: \
case HO_RESULT_ERROR: \
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
return obj##_CTR_##name##_ERROR; \
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
} \
}
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
FUNC_RESULT_COUNTER(BSC, HANDOVER)
Count intra-cell and intra-bsc handover separately Currently the counters don't distinguish between intra-cell and intra-bsc handover. Add _CTR_INTRA_CELL_HO_ and _CTR_INTRA_BSC_HO_ counters to track intra-cell/bsc handover separately. Change-Id: I3a1195640b99813036c9f1426ee5f07548e26547 Related: SYS#4877
2020-08-20 13:25:37 +00:00
FUNC_RESULT_COUNTER(BSC, INTRA_CELL_HO)
FUNC_RESULT_COUNTER(BSC, INTRA_BSC_HO)
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
FUNC_RESULT_COUNTER(BSC, INTER_BSC_HO_IN)
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
cosmetic tweaks on handover counting code I was a bit confused that grep did not find HO counters being used, so let's add some comments to better explain and provide a grep hook. Related: SYS#4878 Change-Id: I242de13e657286e09428a8ca6e583d8b5155faa2
2021-11-02 09:51:56 +00:00
/* INTRA_BSC_HO_OUT does not have a NO_CHANNEL result, so can't do this with FUNC_RESULT_COUNTER() macro. */
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
static int result_counter_BSC_INTER_BSC_HO_OUT(enum handover_result result) {
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
switch (result) {
case HO_RESULT_OK:
fix counters for inter-BSC outgoing Fix copy-paste error that resulted in counting outgoing inter-BSC HOs as incoming ones. Change-Id: I188b5db9e98c76153fdfb6f864d2cbfaea77bd5d
2018-10-09 23:25:57 +00:00
return BSC_CTR_INTER_BSC_HO_OUT_COMPLETED;
add {BTS,BSC}_CTR_INTER_BSC_HO_OUT_FAILED for RR HO Failure So far, during inter-BSC outgoing handover, when receiving an RR Handover Failure from the MS, it would be counted as 'error'. Instead, add the 'failed' counter like for all other HO types. It may make sense to omit the 'failed' counter for inter-BSC *incoming* handover, because then we won't receive an RR Handover Failure message. I probably got those two mixed up during initial development. Related: OS#4736 Change-Id: I9a61d5cc7273a830ba4e66e43e4aac6cdb707471
2020-08-29 03:23:31 +00:00
case HO_RESULT_FAIL_RR_HO_FAIL:
return BSC_CTR_INTER_BSC_HO_OUT_FAILED;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case HO_RESULT_FAIL_TIMEOUT:
fix counters for inter-BSC outgoing Fix copy-paste error that resulted in counting outgoing inter-BSC HOs as incoming ones. Change-Id: I188b5db9e98c76153fdfb6f864d2cbfaea77bd5d
2018-10-09 23:25:57 +00:00
return BSC_CTR_INTER_BSC_HO_OUT_TIMEOUT;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case HO_RESULT_CONN_RELEASE:
fix counters for inter-BSC outgoing Fix copy-paste error that resulted in counting outgoing inter-BSC HOs as incoming ones. Change-Id: I188b5db9e98c76153fdfb6f864d2cbfaea77bd5d
2018-10-09 23:25:57 +00:00
return BSC_CTR_INTER_BSC_HO_OUT_STOPPED;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
default:
case HO_RESULT_ERROR:
fix counters for inter-BSC outgoing Fix copy-paste error that resulted in counting outgoing inter-BSC HOs as incoming ones. Change-Id: I188b5db9e98c76153fdfb6f864d2cbfaea77bd5d
2018-10-09 23:25:57 +00:00
return BSC_CTR_INTER_BSC_HO_OUT_ERROR;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
}
}
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
static int result_counter_bsc(enum handover_scope scope, enum handover_result result)
{
switch (scope) {
default:
fix 'handover:*' counters: remove bogus increments To handle cases of unknown handover type (like failure to find the target cell), return -1 as counter code; treat -1 as skipping in ho_count_bsc() and ho_count_bts(). The handover:* counters indicate overall counts, without knowing whether inter- or intra-BSC, or whether the target ARFCN even exists. So they need to be counted separately, and must not serve as fallback category in result_counter_bsc() and result_counter_bts(). Related: OS#4736 Change-Id: Ie311e599d7bd35d33cf471c6c63e649246e8396a
2020-08-29 02:21:36 +00:00
return -1;
Count intra-cell and intra-bsc handover separately Currently the counters don't distinguish between intra-cell and intra-bsc handover. Add _CTR_INTRA_CELL_HO_ and _CTR_INTRA_BSC_HO_ counters to track intra-cell/bsc handover separately. Change-Id: I3a1195640b99813036c9f1426ee5f07548e26547 Related: SYS#4877
2020-08-20 13:25:37 +00:00
case HO_INTRA_CELL:
return result_counter_BSC_INTRA_CELL_HO(result);
case HO_INTRA_BSC:
return result_counter_BSC_INTRA_BSC_HO(result);
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
case HO_INTER_BSC_OUT:
return result_counter_BSC_INTER_BSC_HO_OUT(result);
case HO_INTER_BSC_IN:
return result_counter_BSC_INTER_BSC_HO_IN(result);
}
}
FUNC_RESULT_COUNTER(BTS, HANDOVER)
Count intra-cell and intra-bsc handover separately Currently the counters don't distinguish between intra-cell and intra-bsc handover. Add _CTR_INTRA_CELL_HO_ and _CTR_INTRA_BSC_HO_ counters to track intra-cell/bsc handover separately. Change-Id: I3a1195640b99813036c9f1426ee5f07548e26547 Related: SYS#4877
2020-08-20 13:25:37 +00:00
FUNC_RESULT_COUNTER(BTS, INTRA_CELL_HO)
FUNC_RESULT_COUNTER(BTS, INTRA_BSC_HO)
implement incoming_intra_bsc_ho:* rate counters We have lots of counters for intra-BSC handover *away from* a given BTS, but still missing are counters indicating how many handovers *targeted* a given BTS. Also count incoming HO. Related: SYS#4878 Related: Iba229313d73fa20266f6d4eac5820579fb14c604 (osmo-ttcn3-hacks) Change-Id: Id9f2c6e2865ebe680879018fff08d283ce24c983
2021-11-02 12:25:48 +00:00
FUNC_RESULT_COUNTER(BTS, INCOMING_INTRA_BSC_HO)
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
FUNC_RESULT_COUNTER(BTS, INTER_BSC_HO_IN)
cosmetic tweaks on handover counting code I was a bit confused that grep did not find HO counters being used, so let's add some comments to better explain and provide a grep hook. Related: SYS#4878 Change-Id: I242de13e657286e09428a8ca6e583d8b5155faa2
2021-11-02 09:51:56 +00:00
/* INTRA_BSC_HO_OUT does not have a NO_CHANNEL result, so can't do this with FUNC_RESULT_COUNTER() macro. */
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
static int result_counter_BTS_INTER_BSC_HO_OUT(enum handover_result result) {
switch (result) {
case HO_RESULT_OK:
return BTS_CTR_INTER_BSC_HO_OUT_COMPLETED;
add {BTS,BSC}_CTR_INTER_BSC_HO_OUT_FAILED for RR HO Failure So far, during inter-BSC outgoing handover, when receiving an RR Handover Failure from the MS, it would be counted as 'error'. Instead, add the 'failed' counter like for all other HO types. It may make sense to omit the 'failed' counter for inter-BSC *incoming* handover, because then we won't receive an RR Handover Failure message. I probably got those two mixed up during initial development. Related: OS#4736 Change-Id: I9a61d5cc7273a830ba4e66e43e4aac6cdb707471
2020-08-29 03:23:31 +00:00
case HO_RESULT_FAIL_RR_HO_FAIL:
return BTS_CTR_INTER_BSC_HO_OUT_FAILED;
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
case HO_RESULT_FAIL_TIMEOUT:
return BTS_CTR_INTER_BSC_HO_OUT_TIMEOUT;
case HO_RESULT_CONN_RELEASE:
return BTS_CTR_INTER_BSC_HO_OUT_STOPPED;
default:
case HO_RESULT_ERROR:
return BTS_CTR_INTER_BSC_HO_OUT_ERROR;
}
}
static int result_counter_bts(enum handover_scope scope, enum handover_result result)
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
{
switch (scope) {
default:
fix 'handover:*' counters: remove bogus increments To handle cases of unknown handover type (like failure to find the target cell), return -1 as counter code; treat -1 as skipping in ho_count_bsc() and ho_count_bts(). The handover:* counters indicate overall counts, without knowing whether inter- or intra-BSC, or whether the target ARFCN even exists. So they need to be counted separately, and must not serve as fallback category in result_counter_bsc() and result_counter_bts(). Related: OS#4736 Change-Id: Ie311e599d7bd35d33cf471c6c63e649246e8396a
2020-08-29 02:21:36 +00:00
return -1;
Count intra-cell and intra-bsc handover separately Currently the counters don't distinguish between intra-cell and intra-bsc handover. Add _CTR_INTRA_CELL_HO_ and _CTR_INTRA_BSC_HO_ counters to track intra-cell/bsc handover separately. Change-Id: I3a1195640b99813036c9f1426ee5f07548e26547 Related: SYS#4877
2020-08-20 13:25:37 +00:00
case HO_INTRA_CELL:
return result_counter_BTS_INTRA_CELL_HO(result);
case HO_INTRA_BSC:
return result_counter_BTS_INTRA_BSC_HO(result);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case HO_INTER_BSC_OUT:
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
return result_counter_BTS_INTER_BSC_HO_OUT(result);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case HO_INTER_BSC_IN:
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
return result_counter_BTS_INTER_BSC_HO_IN(result);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
}
}
Introduce counters to track SRVCC procedures Related: SYS#5337 Change-Id: I5c20da56d465dbcf4366130394f7c42635a24cc7
2021-06-15 15:06:19 +00:00
FUNC_RESULT_COUNTER(BSC, SRVCC)
FUNC_RESULT_COUNTER(BTS, SRVCC)
handover_fsm: send HANDOVER PERFORMED msg on internal ho When an internal handover is done the specification demands to inform the MSC about the event. - Add sending of BSSMAP HANDOVER PERFORMED msg. Change-Id: If26e5807280e0f75a423b3b04f8e3c698c82a351 Depends: libosmocore I825106858bd89afc9837811b8fed2e8accc82441 Related: OS#3645
2018-11-12 08:50:05 +00:00
static void send_handover_performed(struct gsm_subscriber_connection *conn)
{
struct gsm_lchan *lchan = conn->lchan;
struct handover *ho = &conn->ho;
struct osmo_cell_global_id *cell;
struct gsm0808_handover_performed ho_perf_params = {};
struct msgb *msg;
struct gsm0808_speech_codec sc;
int rc;
/* Cause 3.2.2.5 */
ho_perf_params.cause = GSM0808_CAUSE_HANDOVER_SUCCESSFUL;
/* Cell Identifier 3.2.2.17 */
cell = cgi_for_msc(conn->sccp.msc, conn_get_bts(conn));
if (!cell) {
LOG_HO(conn, LOGL_ERROR, "Failed to generate Cell Identifier IE, can't send HANDOVER PERFORMED!\n");
return;
}
ho_perf_params.cell_id = (struct gsm0808_cell_id){
.id_discr = CELL_IDENT_WHOLE_GLOBAL,
.id.global = *cell
};
/* Chosen Channel 3.2.2.33 */
make sure channel mode and s15_s0 are updated only after an ACK I noticed during testing that an lchan used as TCH/F in fact still had its channel mode set to Signalling -- because on Assignment, the Speech mode used to be placed in the *previous* lchan and the new lchan was never updated after the Activ ACK. This is unbearable confusion which I complained about numerous times, so far mostly for cosmetic reasons. But implementing re-assignment properly actually requires this to be cleaned up. Keep all volatile chan mode settings in lchan->activate.* or lchan->modify.*, and only update lchan->* members when an ACK has been received for those settings. So a failed request keeps a sane state. Make sure that those settings are in fact updated in the proper lchan, upon an ACK, so that subsequent re-assignment or mode-modify know the accurate lchan state. Related are upcoming patches that sort out the AMR multirate configuration in a similar fashion, see Iebac2dc26412d877e5364f90d6f2ed7a7952351e Ia7519d2fa9e7f0b61b222d27d077bde4660c40b9 Ie57f9d0e3912632903d9740291225bfd1634ed47. Related: SYS#5315 OS#4940 OS#3787 OS#3833 Change-Id: Ie0da36124d73efc28a8809b63d7c96e2167fc412
2021-04-27 23:17:14 +00:00
ho_perf_params.chosen_channel = gsm0808_chosen_channel(lchan->type, lchan->current_ch_mode_rate.chan_mode);
handover_fsm: send HANDOVER PERFORMED msg on internal ho When an internal handover is done the specification demands to inform the MSC about the event. - Add sending of BSSMAP HANDOVER PERFORMED msg. Change-Id: If26e5807280e0f75a423b3b04f8e3c698c82a351 Depends: libosmocore I825106858bd89afc9837811b8fed2e8accc82441 Related: OS#3645
2018-11-12 08:50:05 +00:00
if (!ho_perf_params.chosen_channel) {
LOG_HO(conn, LOGL_ERROR, "Failed to generate Chosen Channel IE, can't send HANDOVER PERFORMED!\n");
return;
}
ho_perf_params.chosen_channel_present = true;
/* Chosen Encryption Algorithm 3.2.2.44 */
struct gsm_encr: store alg_id in human-readable format I find it weird that we store the A5 algorithm ID in a format that is used on the wire: N + 1 (valid for both A-bis and A interfaces). What confused me even more is that in some functions we print it as if it was in a normal, human-readable format. And this is also why one can see weird constructions like: if (lchan->encr.alg_id > ALG_A5_NR_TO_RSL(0)) { ... } Let's ensure that our internal structures use the A5/N format: alg_id=0: A5/0 (0x01 on the A-bis/A interface) alg_id=1: A5/1 (0x02 on the A-bis/A interface) alg_id=2: A5/2 (0x03 on the A-bis/A interface) ... alg_id=7: A5/7 (0x08 on the A-bis/A interface) so that we can print and compare the value of alg_id without using additional arithmetics. Let's also rename 'alg_id' to 'alg_a5_n' as it most clearly indicates which representation it is storing. This is how the above code snippet would look like: if (lchan->encr.alg_a5_n > 0) { ... } Change-Id: Ieb50c9a352cfa5481aebac2379e0a461663543ec
2022-03-13 22:01:53 +00:00
ho_perf_params.chosen_encr_alg = ALG_A5_NR_TO_BSSAP(lchan->encr.alg_a5_n);
handover_fsm: send HANDOVER PERFORMED msg on internal ho When an internal handover is done the specification demands to inform the MSC about the event. - Add sending of BSSMAP HANDOVER PERFORMED msg. Change-Id: If26e5807280e0f75a423b3b04f8e3c698c82a351 Depends: libosmocore I825106858bd89afc9837811b8fed2e8accc82441 Related: OS#3645
2018-11-12 08:50:05 +00:00
ho_perf_params.chosen_encr_alg_present = true;
make sure early lchan act failure resets the lchan Fix crash after AMR configuration fails. The crash is due to an assertion that finds a non-NULL conn in the lchan, when re-using an lchan that has failed in AMR configuration earlier on. That is because the AMR config still happens in state UNUSED. DCHAN ERROR lchan(0-0-2-TCH_F_TCH_H_PDCH-0)[0x6120000066a0]{UNUSED}: (type=TCH_F) lchan allocation failed in state UNUSED: Can not generate multirate configuration IE ... DCHAN DEBUG lchan(0-0-2-TCH_F_TCH_H_PDCH-0)[0x6120000066a0]{UNUSED}: (type=TCH_F) After failure handling, already in state UNUSED ... ... DCHAN DEBUG lchan(0-0-2-TCH_F_TCH_H_PDCH-0)[0x6120000066a0]{UNUSED}: Received Event LCHAN_EV_ACTIVATE (lchan_fsm.c:324) Assert failed !lchan->conn ../../../../src/osmo-bsc/src/osmo-bsc/lchan_fsm.c:491 The FSM design idea is that when returning to the UNUSED state, all lchan state is cleared. However, when calling lchan_activate(), a failure may happen still in state UNUSED, so that we don't transition *back* to UNUSED properly. So, first transition out of UNUSED before failures can happen. (Other ways to solve this would be to invoke lchan clearing even if already in UNUSED, but semantically, transitioning first makes more sense.) Upon LCHAN_EV_ACTIVATE, just remember the lchan_activate_info and transition to WAIT_TS_READY, so that on lchan_fail(), we can normally transition back to UNUSED and clear the lchan. Move the initial lchan activation code to lchan_fsm_wait_ts_ready_onenter(). Also, there is a bit of duplication of members of the lchan->activate (lchan state) and the lchan_activate_info (passed to lchan_activate()) structs. The fix for this also removes the dup: Add struct lchan_activate_info as child struct at lchan->activate.info, drop the other lchan->activate members that would dup .info.*. Move struct lchan_activate_info declaration to gsm_data.h. Apply the new '.info' member struct throughout the code. Related: OS#3737 Change-Id: Ide665b10fa3f4583059c55346db8da833959e3cc
2018-12-19 16:19:02 +00:00
if (ho->new_lchan->activate.info.requires_voice_stream) {
handover_fsm: send HANDOVER PERFORMED msg on internal ho When an internal handover is done the specification demands to inform the MSC about the event. - Add sending of BSSMAP HANDOVER PERFORMED msg. Change-Id: If26e5807280e0f75a423b3b04f8e3c698c82a351 Depends: libosmocore I825106858bd89afc9837811b8fed2e8accc82441 Related: OS#3645
2018-11-12 08:50:05 +00:00
/* Speech Version (chosen) 3.2.2.51 */
make sure channel mode and s15_s0 are updated only after an ACK I noticed during testing that an lchan used as TCH/F in fact still had its channel mode set to Signalling -- because on Assignment, the Speech mode used to be placed in the *previous* lchan and the new lchan was never updated after the Activ ACK. This is unbearable confusion which I complained about numerous times, so far mostly for cosmetic reasons. But implementing re-assignment properly actually requires this to be cleaned up. Keep all volatile chan mode settings in lchan->activate.* or lchan->modify.*, and only update lchan->* members when an ACK has been received for those settings. So a failed request keeps a sane state. Make sure that those settings are in fact updated in the proper lchan, upon an ACK, so that subsequent re-assignment or mode-modify know the accurate lchan state. Related are upcoming patches that sort out the AMR multirate configuration in a similar fashion, see Iebac2dc26412d877e5364f90d6f2ed7a7952351e Ia7519d2fa9e7f0b61b222d27d077bde4660c40b9 Ie57f9d0e3912632903d9740291225bfd1634ed47. Related: SYS#5315 OS#4940 OS#3787 OS#3833 Change-Id: Ie0da36124d73efc28a8809b63d7c96e2167fc412
2021-04-27 23:17:14 +00:00
ho_perf_params.speech_version_chosen = gsm0808_permitted_speech(lchan->type,
lchan->current_ch_mode_rate.chan_mode);
handover_fsm: send HANDOVER PERFORMED msg on internal ho When an internal handover is done the specification demands to inform the MSC about the event. - Add sending of BSSMAP HANDOVER PERFORMED msg. Change-Id: If26e5807280e0f75a423b3b04f8e3c698c82a351 Depends: libosmocore I825106858bd89afc9837811b8fed2e8accc82441 Related: OS#3645
2018-11-12 08:50:05 +00:00
ho_perf_params.speech_version_chosen_present = true;
/* Speech Codec (chosen) 3.2.2.104 */
if (gscon_is_aoip(conn)) {
/* Extrapolate speech codec from speech mode */
gsm0808_speech_codec_from_chan_type(&sc, ho_perf_params.speech_version_chosen);
make sure channel mode and s15_s0 are updated only after an ACK I noticed during testing that an lchan used as TCH/F in fact still had its channel mode set to Signalling -- because on Assignment, the Speech mode used to be placed in the *previous* lchan and the new lchan was never updated after the Activ ACK. This is unbearable confusion which I complained about numerous times, so far mostly for cosmetic reasons. But implementing re-assignment properly actually requires this to be cleaned up. Keep all volatile chan mode settings in lchan->activate.* or lchan->modify.*, and only update lchan->* members when an ACK has been received for those settings. So a failed request keeps a sane state. Make sure that those settings are in fact updated in the proper lchan, upon an ACK, so that subsequent re-assignment or mode-modify know the accurate lchan state. Related are upcoming patches that sort out the AMR multirate configuration in a similar fashion, see Iebac2dc26412d877e5364f90d6f2ed7a7952351e Ia7519d2fa9e7f0b61b222d27d077bde4660c40b9 Ie57f9d0e3912632903d9740291225bfd1634ed47. Related: SYS#5315 OS#4940 OS#3787 OS#3833 Change-Id: Ie0da36124d73efc28a8809b63d7c96e2167fc412
2021-04-27 23:17:14 +00:00
sc.cfg = conn->lchan->current_ch_mode_rate.s15_s0;
handover_fsm: send HANDOVER PERFORMED msg on internal ho When an internal handover is done the specification demands to inform the MSC about the event. - Add sending of BSSMAP HANDOVER PERFORMED msg. Change-Id: If26e5807280e0f75a423b3b04f8e3c698c82a351 Depends: libosmocore I825106858bd89afc9837811b8fed2e8accc82441 Related: OS#3645
2018-11-12 08:50:05 +00:00
memcpy(&ho_perf_params.speech_codec_chosen, &sc, sizeof(sc));
ho_perf_params.speech_codec_chosen_present = true;
}
}
msg = gsm0808_create_handover_performed(&ho_perf_params);
if (!msg) {
LOG_HO(conn, LOGL_ERROR, "Failed to generate message, can't send HANDOVER PERFORMED!\n");
return;
}
Use new stat item/ctr getter APIs Generated with following and similar spatch snippets: """ @@ expression E1, E2; @@ - &E2->ctr[E1] + rate_ctr_group_get_ctr(E2, E1) """ Change-Id: I0b43f922a595d694ac0aeda80107ef9bf4e755e7
2021-06-04 15:30:21 +00:00
rate_ctr_inc(rate_ctr_group_get_ctr(conn->sccp.msc->msc_ctrs, MSC_CTR_BSSMAP_TX_DT1_HANDOVER_PERFORMED));
handover_fsm: send HANDOVER PERFORMED msg on internal ho When an internal handover is done the specification demands to inform the MSC about the event. - Add sending of BSSMAP HANDOVER PERFORMED msg. Change-Id: If26e5807280e0f75a423b3b04f8e3c698c82a351 Depends: libosmocore I825106858bd89afc9837811b8fed2e8accc82441 Related: OS#3645
2018-11-12 08:50:05 +00:00
rc = gscon_sigtran_send(conn, msg);
if (rc < 0) {
LOG_HO(conn, LOGL_ERROR, "message sending failed, can't send HANDOVER PERFORMED!\n");
return;
}
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
/* Notify the handover decision algorithm of failure and clear out any handover state. */
void handover_end(struct gsm_subscriber_connection *conn, enum handover_result result)
{
struct handover_decision_callbacks *hdc;
struct handover *ho = &conn->ho;
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
struct gsm_bts *bts = conn_get_bts(conn);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
/* Sanity -- an error result ensures beyond doubt that we don't use the new lchan below
* when the handover isn't actually allowed to change this conn. */
if (result == HO_RESULT_OK && ho->new_lchan) {
if (!(ho->scope & (HO_INTRA_CELL | HO_INTRA_BSC | HO_INTER_BSC_IN))) {
LOG_HO(conn, LOGL_ERROR, "Got new lchan, but this is not an incoming inter-BSC HO\n");
result = HO_RESULT_ERROR;
}
if (ho->new_lchan->conn != conn) {
LOG_HO(conn, LOGL_ERROR, "Got new lchan, but it is for another conn\n");
result = HO_RESULT_ERROR;
}
}
if (ho->scope & HO_INTER_BSC_IN) {
if (result == HO_RESULT_OK) {
if (!ho->new_lchan) {
LOG_HO(conn, LOGL_ERROR, "Inter-BSC HO IN ends in success,"
" but there is no lchan\n");
result = HO_RESULT_ERROR;
} else
result = bsc_tx_bssmap_ho_complete(conn, ho->new_lchan);
handover_fsm: adjust inter-BSC HO failure handling to spec Inter-BSC outgoing lacked the required BSSMAP HO Failure dispatch. Not all cases should send BSSMAP HO Failure, name the relevant spec paragraphs in comments and adjust handling. Related: osmo-ttcn3-hacks If772dbbc5f9790d3f911465e1303dd0a99811154 Change-Id: I0980cacb9713e41a1eef3a0a7f6cc892e8a20da5
2018-10-09 23:50:31 +00:00
}
/* Not 'else': above checks may still result in HO_RESULT_ERROR. */
fix inter-BSC-in handover encryption In the field we saw Handover Requests without any Chosen Encryption Algorithm IE, and osmo-bsc completely failed on those. This made me understand my mistake from when I wrote this handover code. So far, from a BSSMAP Handover Request, we (I) used only the Chosen Encryption Algorithm IE to pick the encryption to use on the target lchan. That is very wrong. Instead, figure out the intersection of permitted algorithms MSC & BSC, and pick the best of those. Which means, actually, completely ignore the Chosen Encryption Algorithm IE. In the message, the permitted algorithms are passed as a bitmask. The current code using gsm0808_dec_encrypt_info() passes this on as an array. In order to select_best_cipher(), I could convert that array back to a bitmask. Instead pass the bitmask on from message decoding alongside the struct gsm0808_encrypt_info in req->ei_as_bitmask. In handover_end(), change the condition so that we can also pass HO_RESULT_FAIL_RR_HO_FAIL to emit a Handover Failure. Related: SYS#5839 Change-Id: Iffedc981b60d309ed2e5decd5efedee07a757b53
2022-02-16 14:53:13 +00:00
if (result != HO_RESULT_OK) {
handover_fsm: adjust inter-BSC HO failure handling to spec Inter-BSC outgoing lacked the required BSSMAP HO Failure dispatch. Not all cases should send BSSMAP HO Failure, name the relevant spec paragraphs in comments and adjust handling. Related: osmo-ttcn3-hacks If772dbbc5f9790d3f911465e1303dd0a99811154 Change-Id: I0980cacb9713e41a1eef3a0a7f6cc892e8a20da5
2018-10-09 23:50:31 +00:00
/* Return a BSSMAP Handover Failure, as described in 3GPP TS 48.008 3.1.5.2.2
* "Handover Resource Allocation Failure" */
bsc_tx_bssmap_ho_failure(conn);
}
} else if (ho->scope & HO_INTER_BSC_OUT) {
switch (result) {
case HO_RESULT_OK:
break;
case HO_RESULT_FAIL_RR_HO_FAIL:
/* Return a BSSMAP Handover Failure, as described in 3GPP TS 48.008 3.1.5.3.2
* "Handover Failure" */
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
bsc_tx_bssmap_ho_failure(conn);
handover_fsm: adjust inter-BSC HO failure handling to spec Inter-BSC outgoing lacked the required BSSMAP HO Failure dispatch. Not all cases should send BSSMAP HO Failure, name the relevant spec paragraphs in comments and adjust handling. Related: osmo-ttcn3-hacks If772dbbc5f9790d3f911465e1303dd0a99811154 Change-Id: I0980cacb9713e41a1eef3a0a7f6cc892e8a20da5
2018-10-09 23:50:31 +00:00
break;
default:
case HO_RESULT_FAIL_TIMEOUT:
switch (ho->fi->state) {
case HO_OUT_ST_WAIT_HO_COMMAND:
/* MSC never replied with a Handover Command. Fail and ignore the
* handover, continue to use the lchan. */
break;
default:
case HO_OUT_ST_WAIT_CLEAR:
/* 3GPP TS 48.008 3.1.5.3.3 "Abnormal Conditions": if neither MS reports
* HO Failure nor the MSC sends a Clear Command, we should release the
* dedicated radio resources and send a Clear Request to the MSC. */
Send EUTRAN neighs based on whether Common Id msg contained Last used E-UTRAN PLMN ID From 3GPP TS 48.008 sec 3.1.30 "Common ID": """ If the SCCP connection is established due to CSFB from E-UTRAN and the MSC supports return to the last used PLMN after CS fallback, then it should send the COMMON ID message to the BSS including the Last used E-UTRAN PLMN ID information element if available at the MSC immediately following the successful SCCP connection setup. """ Furthermore, 3GPP TS 48.008 version 16.0.0 Release 16 "3.2.1.21 CLEAR COMMAND", for field CSFB Indication, states: """ NOTE: This information element doesn't serve any useful purpose. MSCs should not send the information element unless it is required by the recipients (due to the need to interwork with older versions of the protocol). It is expected that in future versions of the present document, this information element will be deleted from this message. """ Hence, build up the EUTRAN neighbor list based on whether we received the Last E-UTRAN PLMN ID IE during Common Id. In the future, we should probably filter the list while populating it based on the received IE. This change will also allow reusing same mechanism for SRVCC EUTRAN->GERAN support, where te Last E-UTRAN PLMN ID IE can be found inside "Old BSS to New BSS information" IE in msg HANDOVER REQUEST. Related: SYS#5337 Change-Id: I5d290ac55eca5adde1c33396422f4c10b83c03d5
2021-04-12 18:19:30 +00:00
lchan_release(conn->lchan, true, true, GSM48_RR_CAUSE_ABNORMAL_TIMER,
gscon_last_eutran_plmn(conn));
handover_fsm: adjust inter-BSC HO failure handling to spec Inter-BSC outgoing lacked the required BSSMAP HO Failure dispatch. Not all cases should send BSSMAP HO Failure, name the relevant spec paragraphs in comments and adjust handling. Related: osmo-ttcn3-hacks If772dbbc5f9790d3f911465e1303dd0a99811154 Change-Id: I0980cacb9713e41a1eef3a0a7f6cc892e8a20da5
2018-10-09 23:50:31 +00:00
/* Once the channel release is through, the BSSMAP Clear will follow. */
break;
}
break;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
}
}
/* Rembered this only for error handling: should handover fail, handover_reset() will release the
* MGW endpoint right away. If successful, the conn continues to use the endpoint. */
if (result == HO_RESULT_OK)
conn->ho.created_ci_for_msc = NULL;
Fix some typos Fix typos and common misspellings in code comments and in the manual. Change-Id: I46fc9d424620c77ae9ccf78b58081bd303386d7c
2019-11-13 21:10:41 +00:00
/* If the performed handover was an INTRA BSC HANDOVER, inform the MSC that a handover has happened */
handover_fsm: send HANDOVER PERFORMED msg on internal ho When an internal handover is done the specification demands to inform the MSC about the event. - Add sending of BSSMAP HANDOVER PERFORMED msg. Change-Id: If26e5807280e0f75a423b3b04f8e3c698c82a351 Depends: libosmocore I825106858bd89afc9837811b8fed2e8accc82441 Related: OS#3645
2018-11-12 08:50:05 +00:00
if (result == HO_RESULT_OK && ((ho->scope & HO_INTRA_CELL) || (ho->scope & HO_INTRA_BSC)))
send_handover_performed(conn);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
hdc = handover_decision_callbacks_get(ho->from_hodec_id);
if (hdc && hdc->on_handover_end)
hdc->on_handover_end(conn, result);
fix HO inter-BSC-IN target bts for counters Related: OS#4736 Change-Id: Id38c69695c4ab93733571c0c288a2d5c10624ace
2020-08-29 23:27:21 +00:00
/* HO_INTER_BSC_IN has the source BTS on a remote BSS, so count all of those on the target BTS; also count
* errors onto the HO target BTS if no lchan was obtained. */
if (ho->scope & HO_INTER_BSC_IN)
bts = ho->new_bts;
fix 'handover:*' counters: add missing / move increments Move initial 'handover:attempted' counts from bsc_subscr_conn_fsm.c to handover_fsm.c, where all the other counters are handled. Add missing increments for the overall 'handover:*' counts. Related: OS#4736 Change-Id: I783bdedafc0eb8f2df9ea100792846fecc7ccbf7
2020-08-29 02:21:36 +00:00
ho_count_bsc(result_counter_BSC_HANDOVER(result));
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
ho_count_bsc(result_counter_bsc(ho->scope, result));
fix 'handover:*' counters: add missing / move increments Move initial 'handover:attempted' counts from bsc_subscr_conn_fsm.c to handover_fsm.c, where all the other counters are handled. Add missing increments for the overall 'handover:*' counts. Related: OS#4736 Change-Id: I783bdedafc0eb8f2df9ea100792846fecc7ccbf7
2020-08-29 02:21:36 +00:00
ho_count_bts(bts, result_counter_BTS_HANDOVER(result));
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
ho_count_bts(bts, result_counter_bts(ho->scope, result));
implement incoming_intra_bsc_ho:* rate counters We have lots of counters for intra-BSC handover *away from* a given BTS, but still missing are counters indicating how many handovers *targeted* a given BTS. Also count incoming HO. Related: SYS#4878 Related: Iba229313d73fa20266f6d4eac5820579fb14c604 (osmo-ttcn3-hacks) Change-Id: Id9f2c6e2865ebe680879018fff08d283ce24c983
2021-11-02 12:25:48 +00:00
/* For inter-cell HO, also increment the "INCOMING" counters on the target BTS. */
if (ho->scope & HO_INTRA_BSC)
ho_count_bts(ho->new_bts, result_counter_BTS_INCOMING_INTRA_BSC_HO(result));
Introduce counters to track SRVCC procedures Related: SYS#5337 Change-Id: I5c20da56d465dbcf4366130394f7c42635a24cc7
2021-06-15 15:06:19 +00:00
if (ho->scope & HO_INTER_BSC_IN && conn->fast_return.last_eutran_plmn_valid) {
/* From outside local BSC and with Last EUTRAN PLMN Id => SRVCC */
ho_count_bsc(result_counter_BSC_SRVCC(result));
ho_count_bts(bts, result_counter_BTS_SRVCC(result));
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
LOG_HO(conn, LOGL_INFO, "Result: %s\n", handover_result_name(result));
if (ho->new_lchan && result == HO_RESULT_OK) {
BS-11: Send proprietary MRPCI message after assignment + HO complete This is a non-standard RSL message that must be sent after each traffic channel has been established. Without it, any voice call will be disconnected within seconds. This is a hack; we need to store the subscribers classmark2 value and use it here. Change-Id: I6cb6d25e405aa888c4df4022d897330a6af9e946 Related: OS#2389
2020-08-01 15:03:31 +00:00
struct gsm_bts *bts;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
gscon_change_primary_lchan(conn, conn->ho.new_lchan);
ho->new_lchan = NULL;
LCS: implement the bulk of Location Services Depends: I4d7302a4853518916b6b425e710c10568eb2ffe5 (libosmocore) Change-Id: I28314ba97df86a118497e9b2770e2e6e2484e872
2020-09-17 15:54:39 +00:00
BS-11: Send proprietary MRPCI message after assignment + HO complete This is a non-standard RSL message that must be sent after each traffic channel has been established. Without it, any voice call will be disconnected within seconds. This is a hack; we need to store the subscribers classmark2 value and use it here. Change-Id: I6cb6d25e405aa888c4df4022d897330a6af9e946 Related: OS#2389
2020-08-01 15:03:31 +00:00
bts = conn_get_bts(conn);
if (is_siemens_bts(bts) && ts_is_tch(conn->lchan->ts)) {
/* HACK: store the actual Classmark 2 LV from the subscriber and use it here! */
uint8_t cm2_lv[] = { 0x02, 0x00, 0x00 };
send_siemens_mrpci(conn->lchan, cm2_lv);
}
LCS: implement the bulk of Location Services Depends: I4d7302a4853518916b6b425e710c10568eb2ffe5 (libosmocore) Change-Id: I28314ba97df86a118497e9b2770e2e6e2484e872
2020-09-17 15:54:39 +00:00
/* If a Perform Location Request (LCS) is busy, inform the SMLC that there is a new lchan */
if (conn->lcs.loc_req)
osmo_fsm_inst_dispatch(conn->lcs.loc_req->fi, LCS_LOC_REQ_EV_HANDOVER_PERFORMED, NULL);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
}
osmo_fsm_inst_dispatch(conn->fi, GSCON_EV_HANDOVER_END, &result);
/* Detach the new_lchan last, so we can still see it in above logging */
if (ho->new_lchan) {
/* Release new lchan, it didn't work out */
Send EUTRAN neighs based on whether Common Id msg contained Last used E-UTRAN PLMN ID From 3GPP TS 48.008 sec 3.1.30 "Common ID": """ If the SCCP connection is established due to CSFB from E-UTRAN and the MSC supports return to the last used PLMN after CS fallback, then it should send the COMMON ID message to the BSS including the Last used E-UTRAN PLMN ID information element if available at the MSC immediately following the successful SCCP connection setup. """ Furthermore, 3GPP TS 48.008 version 16.0.0 Release 16 "3.2.1.21 CLEAR COMMAND", for field CSFB Indication, states: """ NOTE: This information element doesn't serve any useful purpose. MSCs should not send the information element unless it is required by the recipients (due to the need to interwork with older versions of the protocol). It is expected that in future versions of the present document, this information element will be deleted from this message. """ Hence, build up the EUTRAN neighbor list based on whether we received the Last E-UTRAN PLMN ID IE during Common Id. In the future, we should probably filter the list while populating it based on the received IE. This change will also allow reusing same mechanism for SRVCC EUTRAN->GERAN support, where te Last E-UTRAN PLMN ID IE can be found inside "Old BSS to New BSS information" IE in msg HANDOVER REQUEST. Related: SYS#5337 Change-Id: I5d290ac55eca5adde1c33396422f4c10b83c03d5
2021-04-12 18:19:30 +00:00
lchan_release(ho->new_lchan, false, true, RSL_ERR_EQUIPMENT_FAIL, NULL);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho->new_lchan = NULL;
}
if ((ho->scope & HO_INTER_BSC_IN) && result == HO_RESULT_OK) {
conn->user_plane.msc_assigned_cic = conn->ho.inter_bsc_in.msc_assigned_cic;
osmo_strlcpy(conn->user_plane.msc_assigned_rtp_addr,
conn->ho.inter_bsc_in.msc_assigned_rtp_addr,
sizeof(conn->user_plane.msc_assigned_rtp_addr));
conn->user_plane.msc_assigned_rtp_port = conn->ho.inter_bsc_in.msc_assigned_rtp_port;
}
handover_reset(conn);
/* We've dispatched the handover result above, let's disconnect to not fire the same event again.
* The parent term event is a safety measure for unplanned termination. */
osmo_fsm_inst_unlink_parent(conn->ho.fi, conn);
osmo_fsm_inst_term(conn->ho.fi, OSMO_FSM_TERM_REGULAR, 0);
}
static void ho_fsm_wait_lchan_active(struct osmo_fsm_inst *fi, uint32_t event, void *data)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
fix inter-BSC-HO-incoming for AoIP (1/2) Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is done establishing. For AoIP, the local RTP address towards the MSC already needs to be known before the Handover Request Acknowledge is sent, so the AoIP Transport Layer Address IE can be included. This patch only modifies the handover FSM, a subsequent patch adds the IE. Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
2019-03-14 03:36:40 +00:00
struct handover *ho = &conn->ho;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
switch (event) {
case HO_EV_LCHAN_ACTIVE:
fix inter-BSC-HO-incoming for AoIP (1/2) Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is done establishing. For AoIP, the local RTP address towards the MSC already needs to be known before the Handover Request Acknowledge is sent, so the AoIP Transport Layer Address IE can be included. This patch only modifies the handover FSM, a subsequent patch adds the IE. Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
2019-03-14 03:36:40 +00:00
/* - If the lchan is voiceless, no need to even think about the MGW.
* - If this is an intra-BSC Handover, we already have an RTP stream towards the MSC and aren't
* touching it.
* - If we're on SCCPlite, the MSC manages the MGW endpoint, all we do is the BTS side CI, so we can
* skip the part that would CRCX towards the MSC.
* So create an MSC side endpoint CI only if a voice lchan is established for an incoming inter-BSC
* handover on AoIP. Otherwise go on to send a Handover Command and wait for the Detect.
*/
if (ho->new_lchan->activate.info.requires_voice_stream
&& (ho->scope & HO_INTER_BSC_IN)
&& gscon_is_aoip(conn))
ho_fsm_state_chg(HO_ST_WAIT_MGW_ENDPOINT_TO_MSC);
else
ho_fsm_state_chg(HO_ST_WAIT_RR_HO_DETECT);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
return;
case HO_EV_LCHAN_ERROR:
ho_fail(HO_RESULT_ERROR, "error while activating lchan %s",
gsm_lchan_name(conn->ho.new_lchan));
return;
default:
OSMO_ASSERT(false);
}
}
fix inter-BSC-HO-incoming for AoIP (1/2) Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is done establishing. For AoIP, the local RTP address towards the MSC already needs to be known before the Handover Request Acknowledge is sent, so the AoIP Transport Layer Address IE can be included. This patch only modifies the handover FSM, a subsequent patch adds the IE. Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
2019-03-14 03:36:40 +00:00
/* Only for voice, only for inter-BSC Handover into this BSC, and only for AoIP:
*
* Establish the MGW endpoint CI that points towards the MSC. This needs to happen after the lchan (lchan_rtp_fsm) has
* created an MGW endpoint with the first CRCX, so that an endpoint is available, and before sending the Handover
* Request Acknowledge, so that the RTP address and port established towards the MSC can be included in the Handover
* Request Acknowledge message.
* (For SCCPlite, the MSC manages the CN side endpoint CI itself, and we don't need to send any RTP address in the
* Handover Request Acknowledge.)
*
* Actually, it should be possible to kick this off even above in handover_start_inter_bsc_in(), to do the CRCX towards
* the MSC at the same time as establishing the lchan. The gscon_ensure_mgw_endpoint() doesn't care which one of
* lchan_rtp_fsm or handover_start_inter_bsc_in() calls it first. The benefit would be that we'd send out the Handover
* Command ever so slightly sooner -- which isn't critical really, because a) how long does a CRCX take, milliseconds?
* and b) the time critical part is *after* the Handover Command was kicked off to keep the transition between cells as
* short as possible. The drawback of doing this earlier is code complexity: receiving the HO_EV_MSC_MGW_OK /
* HO_EV_MSC_MGW_FAIL events would need to be juggled in between the HO_EV_LCHAN_ACTIVE / HO_EV_LCHAN_ERROR. So the
* decision for now is to leave it here.
*/
static void ho_fsm_wait_mgw_endpoint_to_msc_onenter(struct osmo_fsm_inst *fi, uint32_t prev_state)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
struct handover *ho = &conn->ho;
if (!gscon_connect_mgw_to_msc(conn,
ho->new_lchan,
ho->inter_bsc_in.msc_assigned_rtp_addr,
ho->inter_bsc_in.msc_assigned_rtp_port,
fi,
HO_EV_MSC_MGW_OK,
HO_EV_MSC_MGW_FAIL,
NULL,
&ho->created_ci_for_msc)) {
ho_fail(HO_RESULT_ERROR,
"Unable to connect MGW endpoint to the MSC side");
}
}
static void ho_fsm_wait_mgw_endpoint_to_msc(struct osmo_fsm_inst *fi, uint32_t event, void *data)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
const struct mgcp_conn_peer *mgw_info;
switch (event) {
case HO_EV_MSC_MGW_OK:
/* Ensure the endpoint is really there, and log it. This state is only entered for AoIP connections, see
* ho_fsm_wait_lchan_active() above. */
mgw_info = osmo_mgcpc_ep_ci_get_rtp_info(conn->user_plane.mgw_endpoint_ci_msc);
if (!mgw_info) {
ho_fail(HO_RESULT_ERROR,
"Unable to retrieve RTP port info allocated by MGW for"
" the MSC side.");
return;
}
LOG_HO(conn, LOGL_DEBUG, "MGW's MSC side CI: %s:%u\n",
mgw_info->addr, mgw_info->port);
ho_fsm_state_chg(HO_ST_WAIT_RR_HO_DETECT);
return;
case HO_EV_MSC_MGW_FAIL:
ho_fail(HO_RESULT_ERROR,
"Unable to connect MGW endpoint to the MSC side");
return;
default:
OSMO_ASSERT(false);
}
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
static void ho_fsm_wait_rr_ho_detect_onenter(struct osmo_fsm_inst *fi, uint32_t prev_state)
{
int rc;
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
struct handover *ho = &conn->ho;
struct msgb *rr_ho_cmd = gsm48_make_ho_cmd(ho->new_lchan,
fixup: gsm48_make_ho_cmd(): optionally add Synchronization Indication IE This was overlooked during the code review. GCC does not complain because internally both 'enum handover_scope' and 'bool' are interpreted as 'int'. Found this while running my WIP testcase TC_srvcc_eutran_to_geran_a5_3. This change makes it pass. Change-Id: I807fd4a0e700e54c67ca3547d9c0c1b442dd1c54 Fixes: I4e5b1163a71443d706f14ce4bfd5c2294c320432 Related: SYS#5838
2022-03-14 14:12:35 +00:00
ho->scope, ho->async,
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho->new_lchan->ms_power,
ho->ho_ref);
if (!rr_ho_cmd) {
ho_fail(HO_RESULT_ERROR, "Unable to compose RR Handover Command");
return;
}
if (ho->scope & (HO_INTRA_CELL | HO_INTRA_BSC)) {
/* conn->lchan is the old lchan being handovered from */
rr_ho_cmd->lchan = conn->lchan;
rc = gsm48_sendmsg(rr_ho_cmd);
if (rc)
ho_fail(HO_RESULT_ERROR, "Unable to Tx RR Handover Command (rc=%d %s)",
rc, strerror(-rc));
return;
}
if (ho->scope & HO_INTER_BSC_IN) {
rc = bsc_tx_bssmap_ho_request_ack(conn, rr_ho_cmd);
if (rc)
ho_fail(HO_RESULT_ERROR, "Unable to Tx BSSMAP Handover Request Ack (rc=%d %s)",
rc, strerror(-rc));
return;
}
ho_fail(HO_RESULT_ERROR, "Invalid situation, no target for RR Handover Command");
}
static void ho_fsm_wait_rr_ho_detect(struct osmo_fsm_inst *fi, uint32_t event, void *data)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
struct handover *ho = &conn->ho;
switch (event) {
case HO_EV_RR_HO_DETECT:
{
struct handover_rr_detect_data *d = data;
OSMO_ASSERT(d);
if (d->access_delay) {
LOG_HO(conn, LOGL_DEBUG, "RR Handover Detect (Access Delay=%u)\n",
*(d->access_delay));
} else
LOG_HO(conn, LOGL_DEBUG, "RR Handover Detect (no Access Delay IE)\n");
}
if (ho->scope & HO_INTER_BSC_IN) {
int rc = bsc_tx_bssmap_ho_detect(conn);
if (rc) {
ho_fail(HO_RESULT_ERROR,
"Unable to send BSSMAP Handover Detect");
return;
}
}
lchan_fsm: split off lchan_rtp_fsm, establish RTP a bit earlier Change-Id: Id7a4407d9b63be05ce63f5f2768b7d7e3d5c86fb
2018-07-12 19:23:26 +00:00
if (ho->new_lchan->fi_rtp)
osmo_fsm_inst_dispatch(ho->new_lchan->fi_rtp,
LCHAN_RTP_EV_READY_TO_SWITCH_RTP, 0);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho_fsm_state_chg(HO_ST_WAIT_RR_HO_COMPLETE);
/* The lchan FSM will already start to redirect the RTP stream */
return;
case HO_EV_RR_HO_COMPLETE:
LOG_HO(conn, LOGL_ERROR,
"Received RR Handover Complete, but haven't even seen a Handover Detect yet;"
" Accepting handover anyway\n");
lchan_fsm: split off lchan_rtp_fsm, establish RTP a bit earlier Change-Id: Id7a4407d9b63be05ce63f5f2768b7d7e3d5c86fb
2018-07-12 19:23:26 +00:00
if (ho->new_lchan->fi_rtp)
osmo_fsm_inst_dispatch(ho->new_lchan->fi_rtp,
LCHAN_RTP_EV_READY_TO_SWITCH_RTP, 0);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho_fsm_state_chg(HO_ST_WAIT_LCHAN_ESTABLISHED);
return;
case HO_EV_RR_HO_FAIL:
ho_fail(HO_RESULT_FAIL_RR_HO_FAIL, "Received RR Handover Fail message");
return;
default:
OSMO_ASSERT(false);
}
}
static void ho_fsm_wait_rr_ho_complete(struct osmo_fsm_inst *fi, uint32_t event, void *data)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
switch (event) {
cosmetic: FSMs: allow ignorable events In various FSMs, some events may appear later or earlier without need of action. Do not indicate these as 'ERROR' (event not permitted), but allow and ignore them. Debug-log about some of those. From the old code, we've taken over the habit to change into WAIT_BEFORE_RF_RELEASE even before SAPI[0] is released. Hence we may still receive a SAPI[0] REL_IND in WAIT_BEFORE_RF_RELEASE. Don't show this as error message, just silently accept it. Change-Id: Ie320c7c6a1436184aaf2ec5a1843e04f4b3414ab
2018-07-12 03:00:03 +00:00
case HO_EV_RR_HO_DETECT:
/* Numerous HO Detect RACH bursts may follow after the initial one, ignore. */
return;
case HO_EV_LCHAN_ESTABLISHED:
LOG_HO(conn, LOGL_DEBUG, "lchan established, still waiting for RR Handover Complete\n");
/* The lchan is already done with all of its RTP setup. We will notice the lchan state
* being LCHAN_ST_ESTABLISHED in ho_fsm_wait_lchan_established_onenter(). */
return;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
case HO_EV_RR_HO_COMPLETE:
ho_fsm_state_chg(HO_ST_WAIT_LCHAN_ESTABLISHED);
return;
case HO_EV_RR_HO_FAIL:
ho_fail(HO_RESULT_FAIL_RR_HO_FAIL, "Received RR Handover Fail message");
return;
default:
OSMO_ASSERT(false);
}
}
static void ho_fsm_wait_lchan_established_onenter(struct osmo_fsm_inst *fi, uint32_t prev_state)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
cosmetic: FSMs: allow ignorable events In various FSMs, some events may appear later or earlier without need of action. Do not indicate these as 'ERROR' (event not permitted), but allow and ignore them. Debug-log about some of those. From the old code, we've taken over the habit to change into WAIT_BEFORE_RF_RELEASE even before SAPI[0] is released. Hence we may still receive a SAPI[0] REL_IND in WAIT_BEFORE_RF_RELEASE. Don't show this as error message, just silently accept it. Change-Id: Ie320c7c6a1436184aaf2ec5a1843e04f4b3414ab
2018-07-12 03:00:03 +00:00
if (conn->ho.fi && lchan_state_is(conn->ho.new_lchan, LCHAN_ST_ESTABLISHED)) {
LOG_HO(conn, LOGL_DEBUG, "lchan already established earlier\n");
fix inter-BSC-HO-incoming for AoIP (1/2) Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is done establishing. For AoIP, the local RTP address towards the MSC already needs to be known before the Handover Request Acknowledge is sent, so the AoIP Transport Layer Address IE can be included. This patch only modifies the handover FSM, a subsequent patch adds the IE. Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
2019-03-14 03:36:40 +00:00
ho_success();
cosmetic: FSMs: allow ignorable events In various FSMs, some events may appear later or earlier without need of action. Do not indicate these as 'ERROR' (event not permitted), but allow and ignore them. Debug-log about some of those. From the old code, we've taken over the habit to change into WAIT_BEFORE_RF_RELEASE even before SAPI[0] is released. Hence we may still receive a SAPI[0] REL_IND in WAIT_BEFORE_RF_RELEASE. Don't show this as error message, just silently accept it. Change-Id: Ie320c7c6a1436184aaf2ec5a1843e04f4b3414ab
2018-07-12 03:00:03 +00:00
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
}
static void ho_fsm_wait_lchan_established(struct osmo_fsm_inst *fi, uint32_t event, void *data)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
switch (event) {
fix inter-BSC-HO-incoming for AoIP (1/2) Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is done establishing. For AoIP, the local RTP address towards the MSC already needs to be known before the Handover Request Acknowledge is sent, so the AoIP Transport Layer Address IE can be included. This patch only modifies the handover FSM, a subsequent patch adds the IE. Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
2019-03-14 03:36:40 +00:00
case HO_EV_LCHAN_ESTABLISHED:
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho_success();
fix inter-BSC-HO-incoming for AoIP (1/2) Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is done establishing. For AoIP, the local RTP address towards the MSC already needs to be known before the Handover Request Acknowledge is sent, so the AoIP Transport Layer Address IE can be included. This patch only modifies the handover FSM, a subsequent patch adds the IE. Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
2019-03-14 03:36:40 +00:00
break;
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
default:
OSMO_ASSERT(false);
}
}
/* Inter-BSC OUT */
static void handover_start_inter_bsc_out(struct gsm_subscriber_connection *conn,
const struct gsm0808_cell_id_list2 *target_cells)
{
int rc;
struct handover *ho = &conn->ho;
struct osmo_fsm_inst *fi = conn->ho.fi;
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
struct gsm_bts *bts = conn_get_bts(conn);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
ho->scope = HO_INTER_BSC_OUT;
ho_fsm_update_id(fi, "interBSCout");
Count handover per BTS as well as per BSC Our current handover counters only count success/failures per BSC. It would be nice to also count which BTS is part of a (successful/failed) handover. This patch duplicates the BSC counters for the BTS and changes the ho_count and related macros to also count per BTS. If a BTS is NULL (when conn->lchan is NULL) counting for the BTS is ignored. Change-Id: I025ef14e2cfd2eea8880212c9406372ce0bf9296 Related: SYS#4877
2020-08-17 15:09:41 +00:00
ho_count(bts, CTR_INTER_BSC_HO_OUT_ATTEMPTED);
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
rc = bsc_tx_bssmap_ho_required(conn->lchan, target_cells);
if (rc) {
ho_fail(HO_RESULT_ERROR, "Unable to send BSSMAP Handover Required message");
return;
}
ho_fsm_state_chg(HO_OUT_ST_WAIT_HO_COMMAND);
}
static void ho_out_fsm_wait_ho_command(struct osmo_fsm_inst *fi, uint32_t event, void *data)
{
int rc;
struct ho_out_rx_bssmap_ho_command *rx;
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
switch (event) {
case HO_OUT_EV_BSSMAP_HO_COMMAND:
rx = data;
if (!rx) {
ho_fail(HO_RESULT_ERROR,
"Rx BSSMAP Handover Command: no L3 info passed with event");
return;
}
LOG_HO(conn, LOGL_DEBUG, "Rx BSSMAP Handover Command: forwarding Layer 3 Info: %s\n",
osmo_hexdump(rx->l3_info, rx->l3_info_len));
rc = rsl_forward_layer3_info(conn->lchan, rx->l3_info, rx->l3_info_len);
if (rc) {
ho_fail(HO_RESULT_ERROR,
"Rx BSSMAP Handover Command: Failed to forward Layer 3 Info (rc=%d %s)",
rc, strerror(-rc));
return;
}
ho_fsm_state_chg(HO_OUT_ST_WAIT_CLEAR);
return;
default:
OSMO_ASSERT(false);
}
}
ho fsm: handle RR HO Failure for inter-BSC outgoing Before, this would ignore the failure and hit a timeout instead. Rather handle the event directly. Change-Id: I21c43d2907d0413ef18ec43cf27f680ebecf9e82
2018-09-07 14:19:36 +00:00
static void ho_out_fsm_wait_clear(struct osmo_fsm_inst *fi, uint32_t event, void *data)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
switch (event) {
handover_fsm: signal Clear from gscon, for proper HO result counts An inter-BSC-OUT handover ends with a Clear Command, which HO_OUT_ST_WAIT_CLEAR waits for. Actually tell the handover_fsm.c about an incoming Clear Command, so that the inter-BSC-OUT success can be counted. Similarly, count failing handover results for an unexpected Clear Command from the MSC. Related: OS#4736 Change-Id: I0c489838a99f930e2104619ca745191d2a736f1b
2020-08-29 03:24:18 +00:00
/* See also ho_fsm_allstate_action() for ho_success() on HO_EV_CONN_RELEASING */
ho fsm: handle RR HO Failure for inter-BSC outgoing Before, this would ignore the failure and hit a timeout instead. Rather handle the event directly. Change-Id: I21c43d2907d0413ef18ec43cf27f680ebecf9e82
2018-09-07 14:19:36 +00:00
case HO_EV_RR_HO_FAIL:
ho_fail(HO_RESULT_FAIL_RR_HO_FAIL, "Received RR Handover Failure message");
return;
default:
OSMO_ASSERT(false);
}
}
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
#define S(x) (1 << (x))
static const struct osmo_fsm_state ho_fsm_states[] = {
[HO_ST_NOT_STARTED] = {
.name = "NOT_STARTED",
.out_state_mask = 0
| S(HO_ST_WAIT_LCHAN_ACTIVE)
| S(HO_OUT_ST_WAIT_HO_COMMAND)
,
},
[HO_ST_WAIT_LCHAN_ACTIVE] = {
.name = "WAIT_LCHAN_ACTIVE",
.action = ho_fsm_wait_lchan_active,
.in_event_mask = 0
| S(HO_EV_LCHAN_ACTIVE)
| S(HO_EV_LCHAN_ERROR)
,
.out_state_mask = 0
| S(HO_ST_WAIT_LCHAN_ACTIVE)
fix inter-BSC-HO-incoming for AoIP (1/2) Move the HO_ST_WAIT_MGW_ENDPOINT_TO_MSC state up to right after the lchan is done establishing. For AoIP, the local RTP address towards the MSC already needs to be known before the Handover Request Acknowledge is sent, so the AoIP Transport Layer Address IE can be included. This patch only modifies the handover FSM, a subsequent patch adds the IE. Change-Id: I00c18b78573386145af71c4b39f7f22aec24579b
2019-03-14 03:36:40 +00:00
| S(HO_ST_WAIT_MGW_ENDPOINT_TO_MSC)
| S(HO_ST_WAIT_RR_HO_DETECT)
,
},
[HO_ST_WAIT_MGW_ENDPOINT_TO_MSC] = {
.name = "WAIT_MGW_ENDPOINT_TO_MSC",
.onenter = ho_fsm_wait_mgw_endpoint_to_msc_onenter,
.action = ho_fsm_wait_mgw_endpoint_to_msc,
.in_event_mask = 0
| S(HO_EV_MSC_MGW_OK)
| S(HO_EV_MSC_MGW_FAIL)
,
.out_state_mask = 0
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
| S(HO_ST_WAIT_RR_HO_DETECT)
,
},
[HO_ST_WAIT_RR_HO_DETECT] = {
.name = "WAIT_RR_HO_DETECT",
.onenter = ho_fsm_wait_rr_ho_detect_onenter,
.action = ho_fsm_wait_rr_ho_detect,
.in_event_mask = 0
| S(HO_EV_RR_HO_DETECT)
| S(HO_EV_RR_HO_COMPLETE) /* actually as error */
| S(HO_EV_RR_HO_FAIL)
,
.out_state_mask = 0
| S(HO_ST_WAIT_RR_HO_COMPLETE)
| S(HO_ST_WAIT_LCHAN_ESTABLISHED)
,
},
[HO_ST_WAIT_RR_HO_COMPLETE] = {
.name = "WAIT_RR_HO_COMPLETE",
.action = ho_fsm_wait_rr_ho_complete,
.in_event_mask = 0
cosmetic: FSMs: allow ignorable events In various FSMs, some events may appear later or earlier without need of action. Do not indicate these as 'ERROR' (event not permitted), but allow and ignore them. Debug-log about some of those. From the old code, we've taken over the habit to change into WAIT_BEFORE_RF_RELEASE even before SAPI[0] is released. Hence we may still receive a SAPI[0] REL_IND in WAIT_BEFORE_RF_RELEASE. Don't show this as error message, just silently accept it. Change-Id: Ie320c7c6a1436184aaf2ec5a1843e04f4b3414ab
2018-07-12 03:00:03 +00:00
| S(HO_EV_RR_HO_DETECT) /* ignore extra HO RACH */
| S(HO_EV_LCHAN_ESTABLISHED)
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
| S(HO_EV_RR_HO_COMPLETE)
| S(HO_EV_RR_HO_FAIL)
,
.out_state_mask = 0
| S(HO_ST_WAIT_LCHAN_ESTABLISHED)
,
},
[HO_ST_WAIT_LCHAN_ESTABLISHED] = {
.name = "WAIT_LCHAN_ESTABLISHED",
.onenter = ho_fsm_wait_lchan_established_onenter,
.action = ho_fsm_wait_lchan_established,
.in_event_mask = 0
| S(HO_EV_LCHAN_ESTABLISHED)
,
},
[HO_OUT_ST_WAIT_HO_COMMAND] = {
.name = "inter-BSC-OUT:WAIT_HO_COMMAND",
.action = ho_out_fsm_wait_ho_command,
.in_event_mask = 0
| S(HO_OUT_EV_BSSMAP_HO_COMMAND)
,
.out_state_mask = 0
| S(HO_OUT_ST_WAIT_CLEAR)
,
},
[HO_OUT_ST_WAIT_CLEAR] = {
.name = "inter-BSC-OUT:WAIT_CLEAR",
ho fsm: handle RR HO Failure for inter-BSC outgoing Before, this would ignore the failure and hit a timeout instead. Rather handle the event directly. Change-Id: I21c43d2907d0413ef18ec43cf27f680ebecf9e82
2018-09-07 14:19:36 +00:00
.in_event_mask = 0
| S(HO_EV_RR_HO_FAIL)
,
.action = ho_out_fsm_wait_clear,
large refactoring: use FSMs for lchans; add inter-BSC HO Add FSMs: - timeslot_fsm: handle dynamic timeslots and OML+RSL availability. - lchan_fsm: handle an individual lchan activation, RTP stream and release, signal the appropriate calling FSMs on success, failure, release. - mgw_endpoint_fsm: handle one entire endpoint with several CI. - assignment_fsm: BSSMAP Assignment Request. - handover_fsm: all of intra, inter-MO and inter-MT handover. Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing the maximum amount events (32), and it is more logical to treat assignment, handover and MGW procedures in separate FSMs. - Add logging macros for each FSM type: - LOG_TS() - LOG_LCHAN() - LOG_MGWEP(), LOG_CI() - LOG_ASSIGNMENT() - LOG_HO() These log with the osmo_fsm_inst where present. New style decision: logging without a final newline char is awkward, especially for gsmtap logging and when other logs interleave LOGPC() calls; we have various cases where the final \n goes missing, and also this invokes the log category checking N times instead of once. So I decided to make these macros *always* append a newline, but only if there is no final newline yet. I hope that the compiler optimizes the strlen() of the constant format strings away. Thus I can log with or without typing "\n" and always get an \n termination anyway. General: - replace osmo_timers, state enums and program-wide osmo_signal_dispatch() with dedicated FSM timeouts, states and events. - introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def. These can be used (with some macro magic) to define a state's timeout once, and not make mistakes for each osmo_fsm_inst_state_chg(). Details: bsc_subscr_conn_fsm.c: - move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and mgw_endpoint_fsm. - There is exactly one state for an ongoing Assignment, with all details handled in conn->assignment.fi. The state relies on the assignment_fsm's timeout. - There is one state for an ongoing Handover; except for an incoming Handover from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn are both established. - move bssmap_add_lcls_status() to osmo_bsc_lcls.c abis_rsl.c: - move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in abis_rsl.c - reduce some rsl functions to merely send a message, rename to "_tx_". - rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function. - move all timers and error/release handling away into various FSMs. - tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an lchan passed, but just mode,type that they require. Rename to ipacc_speech_mode*() and ipacc_payload_type(). - add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR message received during BSSMAP Handover Command. - move various logging to LOG_LCHAN() in order to log with the lchan FSM instance. One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging from DRR to DRSL. It might actually make sense to combine those categories. - lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance. - handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's correct). - gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS. assignment_fsm.c: - the Chan Mode Modify in case of re-using the same lchan is not implemented yet, because this was also missing in the previous implementation (OS#3357). osmo_bsc_api.c: - simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv twice, once by member assignment and then again with a memcpy.) - During handover, we used to copy the MR config from the old lchan. Since we may handover between FR and HR, rather set the MR Config anew every time, so that FR rates are always available on FR lchans, and never on HR lchans. Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore), I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore) Change-Id: I82e3f918295daa83274a4cf803f046979f284366
2018-05-14 16:14:15 +00:00
},
};
static const struct value_string ho_fsm_event_names[] = {
OSMO_VALUE_STRING(HO_EV_LCHAN_ACTIVE),
OSMO_VALUE_STRING(HO_EV_LCHAN_ESTABLISHED),
OSMO_VALUE_STRING(HO_EV_LCHAN_ERROR),
OSMO_VALUE_STRING(HO_EV_RR_HO_DETECT),
OSMO_VALUE_STRING(HO_EV_RR_HO_COMPLETE),
OSMO_VALUE_STRING(HO_EV_RR_HO_FAIL),
OSMO_VALUE_STRING(HO_EV_MSC_MGW_OK),
OSMO_VALUE_STRING(HO_EV_MSC_MGW_FAIL),
OSMO_VALUE_STRING(HO_EV_CONN_RELEASING),
OSMO_VALUE_STRING(HO_OUT_EV_BSSMAP_HO_COMMAND),
{}
};
void ho_fsm_allstate_action(struct osmo_fsm_inst *fi, uint32_t event, void *data)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
switch (event) {
case HO_EV_CONN_RELEASING:
switch (fi->state) {
case HO_OUT_ST_WAIT_CLEAR:
ho_success();
return;
default:
ho_fail(HO_RESULT_CONN_RELEASE,
"Connection releasing in the middle of handover");
return;
}
case HO_EV_LCHAN_ERROR:
switch (fi->state) {
case HO_OUT_ST_WAIT_HO_COMMAND:
case HO_OUT_ST_WAIT_CLEAR:
LOG_HO(conn, LOGL_ERROR, "Event not permitted: %s\n",
osmo_fsm_event_name(fi->fsm, event));
return;
default:
ho_fail(HO_RESULT_ERROR, "Error while establishing lchan %s",
gsm_lchan_name(data));
return;
}
default:
OSMO_ASSERT(false);
}
}
int ho_fsm_timer_cb(struct osmo_fsm_inst *fi)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
ho_fail(HO_RESULT_FAIL_TIMEOUT, "Timeout");
return 0;
}
void ho_fsm_cleanup(struct osmo_fsm_inst *fi, enum osmo_fsm_term_cause cause)
{
struct gsm_subscriber_connection *conn = ho_fi_conn(fi);
conn->ho.fi = NULL;
}
static struct osmo_fsm ho_fsm = {
.name = "handover",
.states = ho_fsm_states,
.num_states = ARRAY_SIZE(ho_fsm_states),
.log_subsys = DRSL,
.event_names = ho_fsm_event_names,
.allstate_action = ho_fsm_allstate_action,
.allstate_event_mask = 0
| S(HO_EV_CONN_RELEASING)
| S(HO_EV_LCHAN_ERROR)
,
.timer_cb = ho_fsm_timer_cb,
.cleanup = ho_fsm_cleanup,
};