ee63d7d15e
stp: Allow/Disallow to inject messages on the UDP/M2UA interface
2011-02-10 20:09:08 +01:00
0452f22a21
stp: Add code that allows to inject messages on any linkset
...
This can be useful to test out certain messages without having
any of the linksets be fully connected. It is not possible to
get the result. In the future this code should reply with an
M2UA error message if something went wrong.
2011-02-10 20:09:08 +01:00
6b71fd6192
vty: Fix the help and the parameters for the trace command
2011-01-31 22:41:03 +01:00
f603f28488
isup: Make it possible for the STP to handle/not handle ISUP messages
...
Add an option to decide if we should handle GROUP BLOCK and RESET
messages inside the STP or if we should forward those as well.
2011-01-30 00:24:15 +01:00
d3f412bbd5
mtp: Turn error messages into full sentences.
...
Turn the error messages into full sentences that
end with a full stop. Try to put the link set name
and the link number into these messages.
2011-01-28 18:52:16 +01:00
309d79f5ed
mtp: Forbid link up/failure on blocked links.
2011-01-28 18:26:20 +01:00
86a2a53b90
udp: Use link up/down signals from the MIB for the link
...
The mib was patched to send link up/down in case of failures,
only put a link service when the MIB tells us the link is
up, the failure case should only happen for remote links
failing. We will reset and go through link alignment.
2011-01-28 18:23:07 +01:00
122d604838
mgcp: Turn the endpoint-offset into a proper config option
2011-01-26 13:20:32 +01:00
1cf3a83780
mgcp: Make it possible to control the offset from Endpoint to CIC
2011-01-26 12:51:22 +01:00
38d936a445
mtp: Assign a name to linkset, use this name in the log messages
2011-01-26 12:41:42 +01:00
c5562bde48
sctp: Close the socket if we get <= 0 as a result for sctp_rcvmsg
...
The manpage says that -1 is the indication for error but on 2.6.12
we just ended up in a infinite loop as select shows the socket as
readable but a recvmsg does not give any data.
2011-01-26 11:02:42 +01:00
44f848b086
mgcp: Merge from master to respond to a RQNT
2011-01-25 23:43:55 +01:00
fd5d8d2ac1
mtp: Send the TFP/TRA/TFA with the first SLS provided by that link
2011-01-25 13:38:28 +01:00
7d336a55ed
mtp: Make SCCP tfa/tra/tfp messages work on the linkset
...
This will be used to send the data with the right SLS from
the right link of the linkset.
2011-01-25 13:38:27 +01:00
1ec2a749f0
mtp: Remember the first SLS this link is on
2011-01-25 13:38:27 +01:00
4c8ddb356c
vty: Fix the up/down of the MSC link
2011-01-25 13:18:59 +01:00
8b997bb456
configure: We do not want to always link to -lsctp
...
The AC_CHECK_LIB is always setting the LIBS variable and this
will be used for every linker call. We do not want this.
2011-01-25 12:26:59 +01:00
8a96e474a2
mtp: Fix the logic... close the socket if we are blocked
...
Thinko or such.
2011-01-25 09:57:55 +01:00
3c2b84c607
vty: Show the SLC mapping of a linkset
2011-01-24 21:20:34 +01:00
326a1f7310
stats: Fix counting incoming packets from a link
2011-01-24 20:52:30 +01:00
9543f4a356
mtp: Call it mtp_link_submit and use it in mtp_link
...
Remove the _set from the API, call it from the mtp_link.c. This
will fix the statistics for outgoing packets.
2011-01-24 20:49:58 +01:00
3a1c0af868
udp: Create a SNMP session per UDP
...
We do not have the multiple callbacks from SNMP under control
and we can only save the last request if the SNMP Session is
inside the link. This is mostly a workaround for Net-SNMP and
the missing documentation on the async functionality.
2011-01-24 20:21:11 +01:00
4e2e242d70
mtp: Show blocked links as blocked in the vty stat
2011-01-24 16:14:26 +01:00
315ec675ba
mtp: Implement VTY routines to block,unblock,reset a link
...
This can help in link management and reconfiguration of a
link at runtime. It is also a good engineering mode for
multiple linksets.
2011-01-24 16:14:25 +01:00
ea5ce23d72
mtp: Make it possible to block a link.
...
The semantic of a block is to take the physical
link down, call mtp_link_down and to make sure
that the link remains down and no packets are
forwarded there. The unblock call will reset the
link and this should get it back into operation
again.
2011-01-24 15:35:08 +01:00
8ade9b7bc2
pcap: Fix stupid bug and unbreak pcap writing
2011-01-23 16:18:18 +01:00
fca7b12e0d
vty: Install the vty logging commands
2011-01-22 23:19:44 +01:00
16b07c645b
pcap: Dump each packet in the DCAP category
2011-01-22 23:19:27 +01:00
0292127467
debug: Set the right debug area for the M2UA code
2011-01-22 23:05:03 +01:00
5c2e458dca
debug: Add two categories to be used in the future.
2011-01-22 22:57:42 +01:00
1b47ce5b9b
stat: Dump a name next to the OPC
2011-01-22 21:33:18 +01:00
5b2fe8d45b
pcap: Allow to start tracing on a specific linkset after app start
...
Allow to start to trace on a specific linkset after the application
has been started. This allows to stop tracing on a linkset as well.
2011-01-22 21:33:18 +01:00
f6375b49d3
pcap: Allow to log on a link or linkset level
2011-01-22 21:33:18 +01:00
36260e915a
pcap: Classify the direction of such a message
2011-01-22 21:33:18 +01:00
ddf8eae7da
pcap: Run all pcap operations through one method
2011-01-22 21:33:11 +01:00
c6bfa27b5e
udp: Allow to create multiple links via UDP
...
This is the easiest way to support multiple links over UDP.
Specify the number you want and they will be initiated. All
these links will run via the same UDP port.
2011-01-22 17:24:06 +01:00
0b31622482
vty: Print the MSC status on the VTY for relay/cellmgr
2011-01-22 16:43:14 +01:00
a310e53243
vty: Classify the application that we run and provide different options
...
The VTY interface is used for three different application and not
every option will make sense for every app. In the long run we will
split the vty interface but for now we just qualify the application.
2011-01-22 16:34:16 +01:00
fbfe8eb81d
Merge branch 'on-waves/stats'
2011-01-22 16:22:28 +01:00
60af5dd57a
stats: Print some statistics about the state of the current set
2011-01-22 16:22:18 +01:00
51b9e7a396
stats: Implement VTY command to dump the linksets
2011-01-22 16:22:18 +01:00
4c1eb0ee43
stats: Count packets on a per link level
2011-01-22 16:22:18 +01:00
c5d897e847
stats: Collect statistics on the linkset
...
Collect incoming, in sccp, in isup, out isup, out sccp packets.
This does not yet work for out in total.
2011-01-22 16:22:18 +01:00
aafa7c788e
stats: Add rate_counter for more statistics on the MTP side
2011-01-22 16:22:18 +01:00
7d7c711a43
Merge branch 'on-waves/multiple-links'
2011-01-21 19:50:19 +01:00
eab20964b2
udp: Make the SNMP code asynchronous
...
Do not block the application when doing a SNMP request. Work
with the results coming back from the callback. Right now a
link can only be taken down and up.
2011-01-21 19:40:49 +01:00
4da421da6f
udp: Make two snmp functions internal
2011-01-21 18:01:37 +01:00
083a30b9b8
udp: Poll SNMP for timeouts and fd every 100ms
...
This is the easiest way to integrate net-snmp with the event loop,
every 100ms we are going to check for timeouts or incoming messages
2011-01-21 18:01:36 +01:00
f38114eee2
udp: Allow to run multiple links through the same socket
...
The UDP socket will be shared between multiple links, the
snmp session will be also shared between multiple links on
the same hardware.
2011-01-21 18:01:36 +01:00
e250ac3f4b
msc: Fix crash due pong timeout started from a msc reset
...
This is fixing a crash that is caused by the MTP link going
down/up and the main routines asking to send a reset to the
MSC. The sending of a reset is triggering the ping/pong
timeouts. In case there is no MSC connection we could crash.
2011-01-21 12:58:08 +01:00
Holger Hans Peter Freyther