forked from sdr/gr-osmosdr
Dimitri Stolnikov
e5f7b28093
This is based on the original work (https://github.com/Nuand/gr-osmosdr) done by folks at nuand LLC for the gr3.6 branch of gr-osmosdr. The following modifications have been done in this commit: * port to gr-osmosdr master codebase (gr3.7) * moved shared properties to bladerf_common * added & verified IF filter bandwidth setters * set LMS6002D registers with values taken from FAQ 5.27 * print device information (serial/versions) on startup * added fpga= and fw= device arguments to program MCU/FPGA * added bladerf=# dev. arg. to select a specific bladeRF * grc gain field controls RF path VGA for RX/TX * grc BB gain field controls BB path VGA for RX/TX Usage example: osmocom_fft -a "bladerf,fpga=/tmp/hostedx115.rbf" The following RX named gain stages are available: LNA: 0 to 6 dB, in 3dB steps VGA1: 5 to 30 dB, in 1dB steps; nonlinear mapping done inside the lib VGA2: 0 to 60 dB, in 3dB steps; not recommended to be used above 30dB The following TX named gain stages are available: VGA1: -35 to -4 dB, in 1dB steps, BB side VGA2: 0 to 25 dB, in 1dB steps, RF side Thanks a lot to the team of nuand LLC for this major contribution. |
||
---|---|---|
.. | ||
CMakeLists.txt | ||
gen_osmosdr_blocks.py |