GNU Radio block for interfacing with various radio hardware
Go to file
Robert Ghilduta 821fdb3822 bladeRF: convert to using std instead of boost for shared_ptr 2022-06-10 16:30:49 +02:00
apps osmocom_fft: make it work with gr >= 3.9 qwidget/pyqwidget 2022-06-10 16:30:49 +02:00
cmake bladeRF: check libbladeRF version before compiling 2022-06-10 16:30:49 +02:00
docs Replace swig with pybind11 for gr3.9 master compat 2021-01-18 21:16:05 +01:00
grc add xtrx support 2020-11-19 01:41:05 +01:00
include/osmosdr Remove Doxygen warnings. 2021-01-28 22:15:52 +01:00
lib bladeRF: convert to using std instead of boost for shared_ptr 2022-06-10 16:30:49 +02:00
python Remove Doxygen warnings. 2021-01-28 22:15:52 +01:00
.gitignore add a reasonable .gitignore 2022-06-10 16:28:52 +02:00
AUTHORS Add support for FreeSRP 2017-04-18 23:48:08 +02:00
CMakeLists.txt switch to gr-funcube 2022-06-10 16:30:49 +02:00
COPYING update license file to GPL v3 as in source 2012-04-21 14:07:25 +02:00 updated 2015-05-14 00:22:39 +02:00
README switch to gr-funcube 2022-06-10 16:30:49 +02:00


While primarily being developed for the OsmoSDR hardware, this block
as well supports:

 * FUNcube Dongle / Pro+ through gr-funcube
 * RTL2832U based DVB-T dongles through librtlsdr
 * RTL-TCP spectrum server (see librtlsdr project)
 * SDRplay RSP through SDRplay API library
 * gnuradio .cfile input through libgnuradio-blocks
 * RFSPACE SDR-IQ, SDR-IP, NetSDR (incl. X2 option)
 * AirSpy Wideband Receiver through libairspy
 * CCCamp 2015 rad1o Badge through libhackrf
 * Great Scott Gadgets HackRF through libhackrf
 * Nuand LLC bladeRF through libbladeRF library
 * Ettus USRP Devices through Ettus UHD library
 * Fairwaves UmTRX through Fairwaves' module for UHD
 * Fairwaves XTRX through libxtrx
 * Red Pitaya SDR transceiver (
 * FreeSRP through libfreesrp

By using the OsmoSDR block you can take advantage of a common software api in
your application(s) independent of the underlying radio hardware.

For installation and usage guidelines please read the documentation available

For the impatient :) a short excerpt:

The Gnu Radio block requires a recent gnuradio (>= v3.7) to be installed.

Before building the block you have to make sure that all the dependencies
(see list of supported devices above) you are intend to work with are
properly installed. The build system of gr-osmosdr will recognize them and
enable specific source/sink components thereafter.

Please note: prior pulling a new version from git and compiling it,
please do a "make uninstall" first to properly remove the previous version.

Building with cmake:

git clone git://
cd gr-osmosdr/
mkdir build
cd build/
cmake ../
sudo make install
sudo ldconfig

NOTE: The osmocom blocks will appear under 'Sources' and 'Sinks' categories
in GRC menu.