GNU Radio block for interfacing with various radio hardware
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

44 lines
1.5 KiB

10 years ago
While primarily being developed for the OsmoSDR hardware, this block
as well supports:
11 years ago
10 years ago
* FunCube Dongle through libgnuradio-fcd
* OSMOCOM OsmoSDR Devices through libosmosdr
* Great Scott Gadgets HackRF through libhackrf
* Ettus USRP Devices through Ettus UHD library
* RTL2832U based DVB-T dongles through librtlsdr
* RTL-TCP spectrum server (see librtlsdr project)
* MSi2500 based DVB-T dongles through libmirisdr
* gnuradio .cfile input through libgnuradio-blocks
10 years ago
10 years ago
By using the OsmoSDR block you can take advantage of a common software api in
your application(s) independent of the underlying radio hardware.
10 years ago
10 years ago
For installation and usage guidelines please read the documentation available
10 years ago
For the impatient :) a short excerpt:
10 years ago
The Gnu Radio block requires a recent gnuradio (>= v3.7) to be installed.
10 years ago
10 years ago
Before building the block you have to make sure that all the dependencies
(see list of supported devices above) you are intend to work with are
properly installed. The build system of gr-osmosdr will recognize them and
enable specific source/sink components thereafter.
10 years ago
10 years ago
Please note: prior pulling a new version from git and compiling it,
please do a "make uninstall" first to properly remove the previous version.
10 years ago
Building with cmake:
git clone git://
cd gr-osmosdr/
mkdir build
cd build/
cmake ../
sudo make install
sudo ldconfig
10 years ago
NOTE: The OSMOCOM block will appear under 'Sources' and 'Sinks' categories
in GRC menu.