So far, we hard-coded the Capabilities-Exchange-Answer for
HSS emulation. As we want to emulate other DIAMETER network
elements, let's parametrize the template as well as the respective
parameters for the emulation component.
Change-Id: Ie30ff1bac40ab3dc6058587f0586b643ff2b0cb6
Ths IMSI on the Gx interface is encoded into a different AVP than
on the S6a/S6d interfaces. Let's make sure our DIAMETER_Emulation
knows both formats.
Change-Id: I299fcc2e01e908914df32fda4fb93b1114402c77
This adds more DIAMETER types to our TTCN-3 module, specifically those
encountered on Gx between PGW and PCRF.
./AVP.sh Base_IETF_RFC3588.ddf BaseTypes_IETF_RFC3588.ddf AAAInterface_3GPP_TS29272_f10.ddf GxInterface_PCC_3GPP_TS29212_f10.ddf S6Interfaces_3GPP_TS29336_f00.ddf MobileIPv6_HA_IETF_RFC5778.ddf RxInterface_PCC_3GPP_TS29214_f20.ddf NetworkAccessServer_IETF_RFC4005.ddf CreditControl_IETF_RFC4006.ddf CxDxInterface_3GPP_TS29229_c30.ddf GiSGiInterface_3GPP_TS29061_d70.ddf
Change-Id: Ibe7321e695337ff62fdc912270f6e13e6c6d6cf2
it seems TITAN no longer supports 'ifpresent' in certain situations,
see https://www.eclipse.org/forums/index.php/m/1826175/#msg_1826175
Let's make the tests fail if we actually run in those cases, but at
least compile fine and be able to execute all the other tests.
Change-Id: Ia401c2d696979c0062872bca8da62c2ea153427b
All the records related to Mobile Identity IE (see 3GPP TS 24.008,
section 10.5.1.4) are defined in [1], so there is no real need to
dumplicate them. Moreover, most of the related templates in
library/L3_Templates.ttcn are based on these records.
[1] titan.ProtocolModules.MobileL3_v13.4.0/src/MobileL3_CommonIE_Types.ttcn
Change-Id: I27c2743c59db770d6f7e9447dc8c1f539b228ced
This additional couple of test cases reveals several bugs:
1) the IUT encodes a erroneous RR Paging Request message
containing P-TMSI, so TITAN fails to decode it;
2) the IUT prints an invalid P-TMSI in its log output
due to load of misaligned address (found by UBSan).
[1] I97fd5ffc15a4a58112d7c37c69b7ac42b0741a0e
[2] Icf8836f216793e342b239c8e6645aac1e82bf324
Change-Id: I7fbec5b2c5c3943a7413417b623f55c135c152d7
The license disclaimer already stated GPLv2-or-later, it just stated
confusingly you should look at the AGPL for reference. Fix that.
Change-Id: I673c5c177a8e4010921f1fed747ce376f274da54
TTCN-3 interestingly doens't seem to have any case-insensitive string
matching or functions to convert to uppwer/lowercase.
Change-Id: I2e6e0fd2da001a3cc6d9c31c9e766ae54bf17b2f
Used by upcoming D-GSM test, to pass the IP of the emulated GSUP server.
The code is based on f_enc_dns_hostname() in the same file.
Related: OS#4380
Change-Id: I8a5450988711680c93cfd657a34db759a56bc41e
Prepare for upcoming D-GSM test, that lets OsmoHLR act as proxy. It
forwards the messages based on the destination name, so the testsuite
must set it correctly.
Related: OS#4380
Change-Id: I7623b7a7c7a18ba18a38d0834979d18ab0fbb961
Send an mslookup mDNS request to the home HLR, asking about a service
that is not "gsup.hlr". Hence the "_other" in the test name, service
"gsup.hlr" has different code paths, and related tests will be added in
follow-up patches.
This is the first test using MSLookup_mDNS_Emulation, so add related
test infrastructure.
Related: OS#4380
Depends: osmo-hlr I2fe453553c90e6ee527ed13a13089900efd488aa
Change-Id: Ia7f92d33691f910549353b16a7b0efc18e521719
Existing templates are moved to SCPP_Templates.ttcn and new ones
required for the test are added there.
Related: OS#4343
Change-Id: I7b56fe77ac3b350d722c74b043e6ecabc48dcf31
Make it possible to do CS location update, not only PS. This is needed
for upcoming D-GSM related tests.
Related: SYS#4618
Change-Id: Idd699f054c9242614b9bea066428293f8b2da9c2
We already have 16 entries in the GsupImsiTable. Let's also extend
the GsupExpectTable, so we can have 16 components of type
BSC_ConnHdlr running in parallel.
Change-Id: Ibca0e9196c25ab00803041b81f7b490ba2f0a3ba
On channel establishment the first measurement result may lack the
measurement reports from the MS. This is normal behavior, so lets
tolerate that.
Change-Id: Ib2f511991349ab15e02db9c5e45f0df3645835a4
Related: OS#2975
Unlike IMSI, both MSISDN and SMSC address in SM-RP-OA/DA not only
contain the BCD encoded digits, but also a little header with
NPI (Numbering Plan Identification), ToN (Type of Number), and
Extension fields.
Change-Id: I3f55834489f3e613f541cf1e216027e8d48ccaf0
Related: OS#4324
Old versions of osmo-pcu print "Osmo-PCU" as VTY prompt. This commit
allows supporting this kind of prompt.
Change-Id: Ia5acbbe5828901726f7f15c4a99d596e94914c4b
Function f_rx_rlcmac_dl_block_exp_data() still misses proper
verification of data. Apparently the received message has 2 blocks,
first with expected 10 bytes, but next one contains 18 bytes with 4
actual bytes and other bits are padding.
Last DL ACK/NACK sent is not yet working correctly. osmo-pcu seems to be
unable to match it against sent DL block (I think due to non-matching
FN), and instead drops it and schedules after timeout an IMM ASS to try
to send DL block again.
Change-Id: Icf66dd5c07690368722c586632c38fb7e770053c
We added the RAT_TYPE_IE while the respective change in libosmocore
was still in gerrit review. Meanwhile the support there has been
split into two parts: A list of supported radio access types and
another IE indicating the current RAT. Let's catch up with that
in the GSUP implementation.
This makes TC_gsup_sai_eps() pass again.
Change-Id: I2c609dc523cbec562c6c6a05f4c7d600649ff52d
There's also DL_ACK_NACK message for which a template will be introduced
soon, so let's rename and fix typos/wrong descriptions to avoid
confusion later.
Change-Id: I4a2025ad282006953fcfadf429c980b77cb94371
Harald Welte
Pau Espin
Vadim Yanitskiy
Oliver Smith
Philipp Maier