With PCUIF 10 the remote can be IPv4 or IPv6.
Add all missing parts including SNS IPv6 elements,
the support to omit IPv4 elements and a PCU_Tests_SNSv6.cfg
configuration to run all tests with IPv6
Change-Id: I43d64caca600fff78f3fbbb3e8179f447f235d46
This way it's consistent with ts_RSL_ChanMode, and there is
no need to pass dtx_downlink := false as the first param.
Change-Id: I0b87ef87f8cfff1c96b0beead29d549d5fe0b7c6
The testcase TC_meas_res_sign_tchX activates a traffic channel in
signalling mode and checks the RSL resulting measurement reports.
The CHANnel ACTIVation message sets "SDCCH" as "Channel rate and Type"
value. This is invalid, the "Channel Rate and Type" sould be set to "Half /
Full rate TCH Channel Lm / Bm" (while the speech or data indicator is
still set to "Signalling")
Change-Id: I51887b0d0379fcc1f4483d08dfdd6869e7a9f963
Related: OS#4799
Calypso PHY (unlike trxcon) needs to be explicitly configured to
enable forwarding of the TCH traffic. Otherwise it's handled
internally by the DSP and routed to/from the built-in speaker/mic.
Change-Id: I5b9ca5683627716868e85dc33f91d8ca4824cd61
Related: OS#4799
Otherwise the L1 (trxcon or Calypso PHY) would 'think' that we're
in signalling mode, and would not send us Bad Frame Indications.
Change-Id: I0ade3bd63f604c7f0665124b182a023d50030d0b
Depends: I6f403ed0506b4b1872361d9976d3186bfe514b52
Related: OS#4799
A TRAFFIC.ind with 'num_biterr' > 0 or 'fire_crc' != 0 is still
a valid TCH frame - Bad Frame Indication. Let's relax those
parameters for tr_L1CTL_TRAFFIC_IND().
Change-Id: Ia3357e06f986ae59dd0438f9ace3042cae8d3684
Related: OS#4799
In osmocom-bb 'struct l1ctl_dm_est_req' is defined as follows:
struct l1ctl_dm_est_req {
uint8_t tsc;
uint8_t h;
union {
struct l1ctl_h0 h0;
struct l1ctl_h1 h1;
},
uint8_t tch_mode;
uint8_t audio_mode;
} __attribute__((packed));
so the overall size of the union is size of the biggest member:
sizeof(struct l1ctl_h0) is 2
sizeof(struct l1ctl_h1) is 132
Therefore we need to fix our definitions:
- introduce 'record L1ctlH0' (with padding),
- introduce 'union L1ctlH0H1':
- move hopping indicator to L1ctl{H0,H1},
- use it as 'TAG' in 'union L1ctlH0H1'.
Change-Id: I53964f794260f0676cc2771a7acbb679befb06d5
Related: OS#4799
When a RESET-ACK times out, the logs currently are indistinguishable between
BSSMAP and BSSMAP-LE. Add protocol naming for each RESET / RESET-ACK logging to
make sure the information does not need guesswork.
Example of a test failure shown in jenkins:
BSC_Tests.TC_unsol_ass_compl
Stacktrace
Timeout waiting for RESET-ACK after sending RESET
BSC_Tests.ttcn:8295 BSC_Tests control part
BSC_Tests.ttcn:4274 TC_unsol_ass_compl testcase
Nothing conveys that it is (presumably) the background *BSSMAP-LE* timeout
halting the test 5 seconds in, and not an A-interface failure.
Change-Id: I874567e68b8279bf2460b9474241f0a9fe5ff0ff
If IP-SNS is not used we should wait for the RESET procedure to finish
before sending NS-ALIVE.
For IP-SNS start NS-ALIVE in both roles (sgsn and bss) and don't handle
NS-RESET.
Also unified the log messages a bit (received -> Rx).
Related: SYS#5002
Change-Id: Ie01fee70297255b3d9c091bc2cec75b0f915c588
This should not have been merged. It is an intermediate attempt to make the BSC
send the BSSMAP-LE RESET, which doesn't work because the BSC is not restarted
across test runs. I dropped the patch from my branch, while it remained on
gerrit accidentally; then someone else merged it without noticing that it was
no longer part of my lcs branch.
This reverts commit b2b3704d2a.
Change-Id: If191cf0ee5c239066fa41621e812efbdcca2a2b8
Both BSSMAP-LE and BSSMAP use the LCS Cause IE with identical definition. In
order to not add further dependencies from BSSMAP_Templates.ttcn to
BSSAP_LE_Types.ttcn to BSSLAP_Types.ttcn, duplicate the LCS Cause enum.
Change-Id: Ifee698c128a5345f6bf0301ad4dac9e083285d56
Expecting OsmoBSC to send a RESET to the SMLC implies that the virtual SMLC
stays quiet until a RESET is received. Add flag to configure RESET behavior of
BSSMAP-LE.
Change-Id: I49a749b037b614f922044165a4357fe20b68860b
Those can help to match if messages meet certain constraints stipulated
in the BSSGP specification.
Change-Id: I05c768f5a9e4f0b5c1375c2603135a349c38e849
The BVC-RESET / BVC-RESEt-ACK follow a set of rules:
* Signaling BVCI=0 never has a CellId in BVC-RESET nor BVC-RESET-ACK
* Any BVC-RESET or BVC-RESET ack in BSS->SGSN direction must have CellID
* Any BVC-RESET or BVC-RESET ack in SGSN->BSS direction must NOT have CellID
Let's adjust our test expectations accordingly.
This will break tests against "latest", but the amount of work-arounds
needed in this code outweighs the benefit.
Change-Id: Ic8a83f5214c372faa15178dd9b54364e7d2a60cb
The existing BSSGP_Emulation is built around the assumption that every
instance of BSSGP_Emulation only servers one signaling-BVC and one
PTP-BVC. While this is true for osmo-pcu at this point (BTS-colocated
PCU), other BSS/PCU implementations differ.
In general, there can always be any number of PTP BVC (one per cell)
next to the signaling BVC (one per BSS). Let's represent this in
BSSGP_Emulation so we can create more comprehensive tests.
Change-Id: I7e30b4c4e188518a574e082962fba457b3a97ce3
This is required by the spec, and implemented libosmocore since
Change-Id Ie87820537d6d616da4fd4bbf73eab06e28fda5e1
So let's change our test expectations. Meanwhile, introduce
mp_tolerate_bvc_reset_cellid for working around the bug in 'latest'.
Change-Id: Icebee25b53fef623db6ae91ca0d943e70a3c86b7
This is required by the spec, and implemented libosmocore since
Change-Id Ie87820537d6d616da4fd4bbf73eab06e28fda5e1
So let's change our test expectations. Meanwhile, introduce
mp_tolerate_bvc_reset_cellid for working around the bug in 'latest'.
Change-Id: If6245d73ed701e631b67146ace4ba028bdb4226c
We always used to include the CellID IE, but 3GPP TS 48.018 is
actually quite specific about when it should be present and when not.
Change-Id: Iffd023f0272c9ccb087bdd225fcfb08424a46bdf
We want to see useful identification for components in the log, and
hence must be giving every component a name at create() time.
Change-Id: I0fe650243953e4d85161684865acd0354b2e465f
This makes for much more readable code, and we can even do without
activating any default altsteps.
Change-Id: I4c38dd55b7c27899735f5730851d36c1410d96a8
This allows NS_Emulation to react to changes of the underlying
transport layer (e.g. Frame Relay Link/DLCI up).
Change-Id: If00e9c50dc664ce62b6c0cbde99d741e8173169b
This adds a NS_Provider_FR which interfaces between FrameRelay_Emulation
and NS_Emulation. Include support for it only if enabled at compile
time to avoid pulling in a dependency on the FrameRelay stack for every
user of NS_Emulation.
Change-Id: I42ca811d23e383e362d2527c8ff2c916a62a5b42
NSConfiguration currently contains parameters relevant only for IP
based transport. Move IP/UDP parameters into a sub-structure in
anticipation of Frame Relay support.
Change-Id: I6904520d8c2f546327029777d68b1907611a8cf5
Both osmo-bts and osmo-pcu are switching to PCUIFv10 soon, so let's
use the new version by default. For older (latest) IUT versions
not supporting PCUIFv10, one would need to override this module
parameter in {BTS,PCU}_Tests.cfg.
Change-Id: I9350c4a54434c3d46ce9424f382ca0057e58d053
Related: SYS#4868, SYS#4915