mirror of https://gerrit.osmocom.org/simtrace2
167 lines
8.6 KiB
C
167 lines
8.6 KiB
C
/* SIMtrace with SAM3S board definition
|
|
*
|
|
* (C) 2016-2017 by Harald Welte <hwelte@hmw-consulting.de>
|
|
* (C) 2018 by sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
|
|
*/
|
|
#pragma once
|
|
#include "board_common.h"
|
|
#include "simtrace_usb.h"
|
|
|
|
/* Name of the board */
|
|
#define BOARD_NAME "SAM3S-SIMTRACE"
|
|
/* Board definition */
|
|
#define simtrace
|
|
|
|
/** oscillator used as main clock source (in Hz) */
|
|
#define BOARD_MAINOSC 18432000
|
|
/** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
|
|
#define BOARD_MCK 58982400 // 18.432 * 16 / 5
|
|
|
|
/** MCU pin connected to red LED */
|
|
#define PIO_LED_RED PIO_PA17
|
|
/** MCU pin connected to green LED */
|
|
#define PIO_LED_GREEN PIO_PA18
|
|
/** red LED pin definition */
|
|
#define PIN_LED_RED {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** green LED pin definition */
|
|
#define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/** LEDs pin definition */
|
|
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
|
|
/** index for red LED in LEDs pin definition array */
|
|
#define LED_NUM_RED 0
|
|
/** index for green LED in LEDs pin definition array */
|
|
#define LED_NUM_GREEN 1
|
|
|
|
/** Pin configuration **/
|
|
/* Button to force bootloader start (shorted to ground when pressed */
|
|
#define PIN_BOOTLOADER_SW {PIO_PA31, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
|
|
/* Enable powering the card using the second 3.3 V output of the LDO (active high) */
|
|
#define SIM_PWEN_PIN {PIO_PA5, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/* Enable powering the SIM card */
|
|
#define PWR_PINS SIM_PWEN_PIN
|
|
/* Card presence pin */
|
|
#define SW_SIM PIO_PA8
|
|
/* Pull card presence pin high (shorted to ground in card slot when card is present) */
|
|
#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_DEGLITCH | PIO_IT_EDGE }
|
|
|
|
/** Smart card connection **/
|
|
/* Card RST reset signal input (active low; RST_SIM in schematic) */
|
|
#define PIN_SIM_RST {PIO_PA7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
/* Card I/O data signal input/output (I/O_SIM in schematic) */
|
|
#define PIN_SIM_IO {PIO_PA6A_TXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* Card CLK clock input (CLK_SIM in schematic) */
|
|
#define PIN_SIM_CLK {PIO_PA2B_SCK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
/* Pin to measure card I/O timing (to start measuring the ETU on I/O activity; connected I/O_SIM in schematic) */
|
|
#define PIN_SIM_IO_INPUT {PIO_PA1B_TIOB0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
/* Pin used as clock input (to measure the ETU duration; connected to CLK_SIM in schematic) */
|
|
#define PIN_SIM_CLK_INPUT {PIO_PA4B_TCLK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
/* Pins used to measure ETU timing (using timer counter) */
|
|
#define PINS_TC PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT
|
|
|
|
/** Phone connection **/
|
|
/* Phone USIM slot 1 VCC pin (VCC_PHONE in schematic) */
|
|
#define PIN_USIM1_VCC {PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_EDGE | PIO_DEGLITCH }
|
|
/* Phone USIM slot 1 RST pin (active low; RST_PHONE in schematic) */
|
|
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_EDGE | PIO_DEGLITCH }
|
|
/* Phone I/O data signal input/output (I/O_PHONE in schematic) */
|
|
#define PIN_USIM1_IO {PIO_PA22A_TXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* Phone CLK clock input (CLK_PHONE in schematic) */
|
|
#define PIN_USIM1_CLK {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* Pin used for phone USIM slot 1 communication */
|
|
#define PINS_USIM1 PIN_USIM1_IO, PIN_USIM1_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST
|
|
/* Phone I/O data signal input/output (unused USART RX input; connected to I/O_PHONE in schematic) */
|
|
#define PIN_PHONE_IO_INPUT {PIO_PA21A_RXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* Pin used as clock input (to measure the ETU duration; connected to CLK_PHONE in schematic) */
|
|
#define PIN_PHONE_CLK_INPUT {PIO_PA29B_TCLK2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
|
|
/** Default pin configuration **/
|
|
/* Disconnect VPP, CLK, and RST lines between card and phone using bus switch (high sets bus switch to high-impedance) */
|
|
#define PIN_SC_SW_DEFAULT {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/* Disconnect I/O line between card and phone using bus switch (high sets bus switch to high-impedance) */
|
|
#define PIN_IO_SW_DEFAULT {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/* Disconnect all lines (VPP, CLK, RST, and I/O) between card and phone */
|
|
#define PINS_BUS_DEFAULT PIN_SC_SW_DEFAULT, PIN_IO_SW_DEFAULT
|
|
|
|
/** Sniffer configuration **/
|
|
/* Connect VPP, CLK, and RST lines between card and phone using bus switch (low connects signals on bus switch) */
|
|
#define PIN_SC_SW_SNIFF {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
/* Connect I/O line between card and phone using bus switch (low connects signals on bus switch) */
|
|
#define PIN_IO_SW_SNIFF {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
/* Connect all lines (VPP, CLK, RST, and I/O) between card and phone */
|
|
#define PINS_BUS_SNIFF PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF
|
|
/* Card RST reset signal input (use as input since the phone will drive it) */
|
|
#define PIN_SIM_RST_SNIFF {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
|
|
/* Pins used to sniff phone-card communication */
|
|
#define PINS_SIM_SNIFF PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
|
|
/* Disable power converter 4.5-6V to 3.3V (active high) */
|
|
#define PIN_SIM_PWEN_SNIFF {PIO_PA5, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
/* Enable power switch to forward VCC_PHONE to VCC_SIM (active high) */
|
|
#define PIN_VCC_FWD_SNIFF {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/* Use phone VCC to power card */
|
|
#define PINS_PWR_SNIFF PIN_SIM_PWEN_SNIFF, PIN_VCC_FWD_SNIFF
|
|
|
|
/** CCID configuration */
|
|
/* Card RST reset signal input (active low; RST_SIM in schematic) */
|
|
#define PIN_ISO7816_RSTMC {PIO_PA7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
/* ISO7816-communication related pins */
|
|
#define PINS_ISO7816 PIN_SIM_IO, PIN_SIM_CLK, PIN_ISO7816_RSTMC // SIM_PWEN_PIN, PIN_SIM_IO2, PIN_SIM_CLK2
|
|
|
|
/** External SPI flash interface **/
|
|
/* SPI MISO pin definition */
|
|
#define PIN_SPI_MISO {PIO_PA12A_MISO, PIOA, PIOA, PIO_PERIPH_A, PIO_PULLUP}
|
|
/* SPI MOSI pin definition */
|
|
#define PIN_SPI_MOSI {PIO_PA13A_MOSI, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* SPI SCK pin definition */
|
|
#define PIN_SPI_SCK {PIO_PA14A_SPCK, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* SPI pins definition. Contains MISO, MOSI & SCK */
|
|
#define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SCK
|
|
/* SPI chip select 0 pin definition */
|
|
#define PIN_SPI_NPCS0 {PIO_PA11A_NPCS0, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/* SPI flash write protect pin (active low, pulled low) */
|
|
#define PIN_SPI_WP {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
/** Pin configuration to control USB pull-up on D+
|
|
* @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
|
|
*/
|
|
#define PIN_USB_PULLUP {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
|
|
/** USB definitions */
|
|
/* OpenMoko SIMtrace 2 USB vendor ID */
|
|
#define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO
|
|
/* OpenMoko SIMtrace 2 USB product ID (main application/runtime mode) */
|
|
#define BOARD_USB_PRODUCT_ID USB_PRODUCT_SIMTRACE2
|
|
/* OpenMoko SIMtrace 2 DFU USB product ID (DFU bootloader/DFU mode) */
|
|
#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_SIMTRACE2_DFU
|
|
/* USB release number (bcdDevice, shown as 0.00) */
|
|
#define BOARD_USB_RELEASE 0x000
|
|
/* Indicate SIMtrace is bus power in USB attributes */
|
|
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
|
|
|
|
/** Supported modes */
|
|
/* SIMtrace board supports sniffer mode */
|
|
#ifdef APPLICATION_trace
|
|
#define HAVE_SNIFFER
|
|
#endif
|
|
/* SIMtrace board supports CCID mode */
|
|
//#define HAVE_CCID
|
|
/* SIMtrace board supports card emulation mode */
|
|
#ifdef APPLICATION_cardem
|
|
#define HAVE_CARDEM
|
|
#endif
|
|
/* SIMtrace board supports man-in-the-middle mode */
|
|
//#define HAVE_MITM
|