Contrary to other hardware designs, octsimtest has a level-shifter in
the I/O line to support testing with 1.8, 3 and 5V. This level shifter
is bi-directional, but the direction needs to be explicitly specified
via the SIM_IO_DIR signal attached to PA26.
Change-Id: I44171363b5bd69d6049b12c86f8143be83557cb2
* code for controlling the Card slot + frequencyt divider muxes
* put everything in place to build cardem application for it
Change-Id: I7e03e0c0f2999a1ce2dad966d98e22033fa58465
The octsimtest board only supports cardem mode, not 'ccid'
nor 'sniffer'. Remove related GPIO pin #defines from board.h
Change-Id: I43e8631d945ba183a1e5b1e37dd4565adb377154
When the cardem detects a reset from the phone/modem, pass this on
to the actual card via the PC/SC reader. This is important to
reset the card state whenever requested by the stack/driver on the
phone/modem.
Change-Id: I7056476c5f81e8aa8f550afb86bf2380d1497ebb
Depends: libosmocore 20199da02d37a6d284915a27ec12641e79b8781c
This reverts commit baa62777c8 which
deleted simtrace-cardem builds to prevent them from being published.
Change-Id: I63fd4bea2985fcc87f202d8b69a4f24661858185
likewise, enable HAVE_SNIFFER currently only if we build the sniffer
firmware.
It's been many years too long to finally get those all merged in one
firmware :(
Change-Id: Ib433f180746f75458a44f4988643465bd846b04b
Before this patch, we would always use either a hard-coded default
ATR from the source code, or we would use one that the user specified
on the command line.
The more sane default is to pass-through the real ATR of the card.
Change-Id: I75bf618a6b0d983727de4c2f19b4b48ec3e12af8
Closes: OS#5107
Requires: libosmocore.git 22117a7164012d6d88fc202cd63df79c6068484d
There's some code that wasnts to goto within the while loop, and there's
some other code that wants to goto after the while loop. Don't jump
from outside the while loop into the while loop.
Change-Id: Ic2a94ad034dd259f15712687443b569f0d18ff3f
We should use service-aliases and not the primary host name, as
that makes migration between machines hard.
Change-Id: I34b18457268ae6f8ae3a053c5424210074a4d52e
As we store the waiting time (WT) in 'etu', we must adjust the formula
from ISO 7816-3. The 'Fi' component in the formula only exists to
compute clock cycles from the etu, which we don't need here.
Without this patch, the waiting time would be way too large (by a factor
of 372 in the default case).
Change-Id: Ia21bc7303f9b38834b5b1753983ed2a99bfc7d95
Related: OS#1704
The existing code started the timer once (and expired once) but didn't
properly handle re-starting of the timer. Neither did it handle
the 'half time expiration' case. If we want to call a function after
half the WT expiring, we must of course program the hardware for half
the timeout, and not the full timeout...
Change-Id: Ia999d97f835c27597fcd1cf7ac78bac0ab9c98c1
Related: OS#1704
Instead of using the timer/counter peripheral to handle the waiting time
and corresponding timeout, the USART peripheral internal timeout
mechanism is used.
This is particularly important for the SIMtrace board since there
(contrary to other boards) the I/O signal is not wired to a TIO pin
of the timer/counter block, and hence Rx/Tx data cannot reset that
timer/counter.
As a result of this migration, cardem is now supported not only on
owhw + qmod, but also on the simtrace board.
The guts of this change have been lifted out of Change-Id
Ibcb2c8cace9137695adf5fb3de43566f7cfb93b5 by Kevin Redon, which was
unfortunately touching various different topics at the same time and
hence was split up. Some improvements are the introduction of the
ENABLE_TX_TIMER_ONLY mode, which avoids the USART interrupt handler
getting hammered with TXRDY between release of RST and start of the ATR.
Change-Id: Ibcb2c8cace9137695adf5fb3de43566f7cfb93b5
Related: OS#1704
Those are already initialized at various transitions of the master
7816 FSM, but let's properly initialize them at start-up, too.
Change-Id: I81b2a8ef3284559164700d94717e4ccf008f53df
* enter ISO_S_WAIT_RST when RST is asserted
* enter ISO_S_WAIT_ATR only when we RST is released while in state ISO_S_WAIT_RST
Change-Id: I620333aa8d45561a8028b948955a27f667b58406
Fi/Di are not the index into the table, but the contents of the table
as resolved by Fi_index / Di_index. Let's clarify the terminology.
Change-Id: If364e08e7c9a3a9707e6d54b9267c6a7c088e415
The ISO7816 spec terms are well-defined, let's not abuse them. We used
to consider "Fi" as the "index into the table of F values", while the
spec actually considers Fi as the initial value for F.
Let's make sure we use the terms quite clearly:
* Fi and Di are the initial values for F and D
* F*_index and D*_index are the indexes into the ISO7816-3 Tables
Furthermore, let's track Fi separately from F, as e.g. the waiting
time definition only considers Fi as indicated in the ATR, despite
an actually different F value might have been negotiated via PTS
meanwhile.
Change-Id: Ieb2425e8380a81b79df7b2bd072902994e9c3ee7
Related: OS##1704
As we will soon introduce the distinction between Fi and F, we should
use uppercase letters, as lower-case 'f' is defined in ISO7816-3 as
the frequency, which is different from the upper-case 'F'.
Change-Id: Iaede621551520576e9b9af878fa46fbc88e59c2a
the simtrace board uses a bus switch not used on qmod and owhw to
switch the SIM between physical and virtual
Change-Id: Ieaf2ed4761fc3e04f33f9aac5c04a768c9a6f71e
Related: OS#1704
The comment didn't reflect the source. I checked all users and
the code consistently stores the waiting time in units of 'etu'.
Change-Id: I2bc4a7c19cee5fb487ad639ee48ecaea706f6172
Disable stack protector for all boards/apps by default, not only
qmod-dfu. Use 'make STACK_PROTECTOR=1' to enable.
This was recommened by Eric:
"I'd argue that we do not want this in general, since it adds canaries
to all functions that deal with buffers, and therefore impacts the
overall timing in a non determinstic way depending on inlining and
optimizations, while contributing nothing in non debug builds."
Related: OS#5081
Change-Id: I30ad97f231ea5b401def650bc9adc7e9f2770df0
Prevent build failure on debian 9, ubuntu 20.04, 20.10, where
bin/qmod-dfu-flash.elf does not fit the ROM.
Fixes: OS#5081
Change-Id: I9fffe4c323094679062428f41a4246b1c1b30ca2
This reverts commit 4a29f64cbe.
The code replicates to a large extent what is already present in iso7816_fidi.c
and I have serious doubts about the correctness of the computation in
its iso7816_3_calculate_wt() function.
Change-Id: I80dab4401d13306d573a6a35ce8729d2acc141e4
This reverts commit 4a58c08d67.
The code replicates to a large extent what is already present in iso7816_fidi.c
and I have serious doubts about the correctness of the computation in
its iso7816_3_calculate_wt() function.
Change-Id: I3f26da4e9aa8d7b0f4b4b7992269cf365a643ec7
* support Interrupt STATUS notifications
* use osmocom libusb abstraction
* use asynchronous URBs for interrupt + bulk
Change-Id: Ib04798572295f25477719124530b6584780c5b75
While this differs from tha naming in the schematics ({CLK,IO}_PHONE),
this matches the naming scheme used for USIM2 and the naming on other
boards.
Change-Id: I486b14260faec897e8c8698c4b7987bf36492497
this will become part of libosmocore since it it common to smart
card related projects (such as osmo-ccid-firmware)
Change-Id: I3d4c65d137fc4555fcb256443feadd1c695de73d
the SIMtrace board does not support the current card emulation
application because this uses a timer counter to handle the
timeouts, but on the SIMtrace board this is not connected to the
CLK signal
Change-Id: Idd09ea534179f0ede705573e1373dbd045c9828a
make V=1 can be used to echo all compilation commands, which is useful
because it allows IDEs to parse the gcc output in oder to properly index
the source files using the actual defines passed to the compiler.
Change-Id: I25c41dff89302a73ddd2a4aaba7cb14912fac3b8
For some reason undefined symbols were downgraded to warnings, which
means building a firmware that calls missing functions (= address zero)
was perfectly fine, which of course made development more exciting....
This applies to builtins, too, printf of one char gets downgraded to
putchar, which we don't have, so disable builtins.
Change-Id: I492f41ad4162b9d07b1881ae4aed019db2dff8b5
Call the script from the proper directory, and cd into the topdir on top
of the script. Fixes:
/build/contrib/jenkins.sh: line 71: contrib/prepare_upload.sh: No such file or directory
Related: OS#4413
Change-Id: Icbfaa5579aab887830ca90b24a2e322df8d98f4f
Don't create copies of firmware files with version strings appended in
the normal build. Only do this before uploading the firmware files.
I have verified that "make" before this change and
"make; contrib/prepare_upload.sh" after produce the same files.
Close: OS#4413
Change-Id: I118a4ff397a178281c26a6b98112fa66b6f049ab
Use .tarball-version from the topdir, because it only gets written there
when generating the OBS package. Remove the duplicate git-version-gen
script and use the one from the topdir to generate a version string if
building from the git tree.
Related: OS#4413
Change-Id: I4b197a218ab44632ff182ffbd72e15c2b20db341
Fix having the version set to UNKNOWN in all packages built by OBS. The
osmo-ci.git scripts generating the source packages to be built by OBS
generate a ".tarball-version" file with a version string like
"0.7.0.70-657c", but it did not get used because the path was wrong.
Related: OS#4413
Related: https://osmocom.org/projects/cellular-infrastructure/wiki/Git-version-gen
Change-Id: Ic0b06011a604beec7c1c907c2c6e4ae927456e2e
Fixes:
dpkg-source: warning: no source format specified in debian/source/format, see dpkg-source(1)
Related: OS#4413
Change-Id: I4c474547233ebb87a1246b01fbd7ff8879921c21
dfu flashing the ST12 was easy, but i was never able to
get ST34 into dfu mode. Changing the firmware so it resets
itself just like the octsim instead of starting a timer and
waiting for a reset from the host made it work every time for me.
Change-Id: Ida636ec925f40d6d56551f170150181350d03bbd
This renaming is to avoid any confusion with the osmo-remsim
project, living in its separate git repository.
The simtrace2-cardem-pcsc doesn't feature any 'remote' part. Rather,
it emulates the SIM card interface towards the device/phone/modem,
and forwards it to a local PC/SC card reader.
Change-Id: Ic15f0a89964a72fe3ab7a5145a073720f6207e24
The UDP based forwarding really only ever was a quick hack to
demonstrate the capabilities.
Meanwhile, we've had the proper osmo-remsim project implemented,
which provides a much more reliable and comprehensive way of
managing SIM card emulation devices (SIMtrace2, sysmoQMOD, ...)
and collection of card readers (sysmoOCTSIM or any other PC/SC
supported readers).
Hence, remove the "UDP forwarding part.
Change-Id: Ia4b9447b95872b6e0dda6dca644f1ed4a87355a0
Harald Welte
Kevin Redon
Oliver Smith
Eric Wild
Leonard Hübner