Commit Graph

16 Commits

Author SHA1 Message Date
Oliver Smith f721e69bc1 treewide: remove FSF address
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.

Change-Id: Ie0a3b2273383adbb3303faffd6ff96be7f4cae99
2021-12-14 11:47:21 +01:00
Harald Welte 45a8f2beee Bump version: 0.7.0.166-61b4-dirty → 0.8.0
Change-Id: I1650f7181cf514ba00e6f70e8133ee88780ebf41
2021-12-09 08:12:56 +01:00
Harald Welte 4fe93be725 introduce support for new ngff_cardem board
This adds support for the new ngff_cardem board, a board that
basically combines a ngff breakout board with a built-in SIMtrace2.

Cardem works, but depending on the modem it might need a adjusted ATR to
ensure a lower baud  rate is used by the modem, high rates might lead
to weird power cycling of the card after a few transfers.

Trace was also tested and appears to work as expected.

Change-Id: Ia96124fbe8a752c98e7fd4096d542a3b2b9bc255
2021-08-02 09:22:46 +00:00
Harald Welte dcfea28a4f don't printf() directly from library code, go via libosmocore logging
This allows us to use different log levels, and permits the user to use
other log targets.

Change-Id: I08ef7cfa5d8734882746a11ccd5f059d757401ae
2021-06-30 08:17:58 +00:00
Harald Welte 913c86b95d Add usb product ID of sysmoOCTSIMTEST
This is a custom board for production testing of the sysmoOCTSIM,
an 8-slot smart card reader.

Change-Id: I65839be50ac896c76f34755fb2800f836f6cdae4
2021-06-02 10:09:40 +02:00
Harald Welte 859f1b0974 Introduce support for asynchronous USB transmission
libosmo-simtrace2 traditionally had only supported blocking, synchronous
I/O, while other osmocom programs such as remsim-client used
asynchronous USB I/O.

Using async USB I/O for IRQ + IN transfers while using blocking I/O for
OUT transfers doesn't seem to work reliably, so we have to offer a way
to perform the OUT transfers generated within libosmo-simtrace2 in async
mode.

Change-Id: Ib8939bdb7f533cd20a34a30a97f12b782b9816c2
2020-05-25 23:00:20 +02:00
Harald Welte 02712376df simtrace2_api: Add osmo_st2_cardem_request_config()
In Change-Id I7cdd3f9171dbed45de0089defe29d2b59044bd84 we introduced
firmware support for SIMTRACE_MSGT_BD_CEMU_CONFIG.  The respective
host part was so far only implemented in osmo-remsim-client-st2,
but not in libosmo-simtrace2.  Let's fix that.

Change-Id: Ia4822d360a271d2ce9725f761cb95de58663ac3b
2020-02-22 22:13:24 +01:00
Harald Welte 02f01e859c host/lib/gsmtap.c: Add GPLv2 disclaimer
Change-Id: Ie163af869c6aa2f3e2bd9007432dc6945384aaf2
2020-01-17 10:29:03 +01:00
Harald Welte ce4b5c25e8 library: Add osmo_st2_compatible_dev_idsp[]
This is a list of known-compatible USB VID/PID pairs.

Change-Id: I3ef66ebba307899c57077bfd633f84f30190f4dc
2019-12-26 08:07:59 +01:00
Harald Welte 7f7de1ec1d migrate to libosmousb
the code we used to have in libusb_util.c has been migrated to
libosmousb, a new part of libosmocore.git.  Let's remove our historic
copy and use the new shared library instead.

Change-Id: Ib588c08f873c4da8f3a02815ee2767674a6a5061
2019-12-26 08:07:19 +01:00
Harald Welte 563601cff2 [lib] apdu_dispatch: Don't print APDU state to stdout
The printing was always only done at the end of osmo_apdu_segment_in(),
so let's leave the decision up to the user if he wants to print the
state at every iteration or not.

We now provide osmo_apdu_dump_context_buf() to the user so he can obtain
a string representation of the internal state for logging at any time he
requires.

Change-Id: Id3e3cf1605dec84077b158c1c5715f8eef2641d5
2019-12-17 12:46:21 +00:00
Harald Welte e9556efe88 [lib] apdu_dispatch: Use DLGLOBAL and don't printf() directly
Change-Id: I2f3ec49d34b6806e13af185fb629cabc486891fb
2019-12-17 12:46:21 +00:00
Harald Welte 483a3203fb simtrace2_api: Remove dead code
Change-Id: Iab393a6cf9ae1218e1554d9c0bfb7aab2cc3c35e
2019-12-02 11:23:51 +01:00
Harald Welte 6f41349db9 merge simtrace2-discovery.[ch] to libusb_util.[ch]
Change-Id: I4defbec70986a90c1f0cfb7587393265b73c0163
2019-11-24 23:15:53 +01:00
Harald Welte 208890ad6e use osmo_st2_ or osmo_ prefix for [shared] library symbols
Change-Id: Ie2686b30717b9541b1217802ca967cd0a4cbde9b
2019-11-24 23:15:53 +01:00
Harald Welte 964cda309d host: use autotools and split shared code to libosmo-simtrace2
Change-Id: I57e77f927ee9e169cc794c5dc6b128a2d590201b
2019-11-24 23:15:53 +01:00