mirror of https://gerrit.osmocom.org/simtrace2
Add freq_ctr app
The freq_ctr app is a small application that is implementing a simplistic direct-mode frequency counter using the internal 32.768kHz oscillator and two TC blocks. One of them is used to generate a 1Hz signal, which is then subsequently used by the other TC to trigger a counter read after exactly 1s. This is in itself not something useful on a simtrace2 device. However, it is a separate 'app' and I prefer to have the code here in master over some obscure branch that's easy to forget about. Change-Id: I2249bfb8dd6a88d85d406f3b33537377133d0939
This commit is contained in:
parent
b7e326cad3
commit
bb9b0dc8e8
|
@ -0,0 +1,3 @@
|
|||
C_FILES += $(C_LIBUSB_RT)
|
||||
|
||||
C_FILES += freq_ctr.c
|
|
@ -0,0 +1,55 @@
|
|||
#include <stdint.h>
|
||||
#include "utils.h"
|
||||
#include "tc_etu.h"
|
||||
#include "chip.h"
|
||||
|
||||
|
||||
/* pins for Channel 0 of TC-block 0 */
|
||||
#define PIN_TIOA0 {PIO_PA0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
|
||||
/* pins for Channel 1 of TC-block 0 */
|
||||
#define PIN_TIOA1 {PIO_PA15, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_TCLK1 {PIO_PA28, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
|
||||
static const Pin pins_tc[] = { PIN_TIOA0, PIN_TIOA1, PIN_TCLK1 };
|
||||
|
||||
static TcChannel *tc1 = &TC0->TC_CHANNEL[1];
|
||||
|
||||
void TC1_IrqHandler(void)
|
||||
{
|
||||
uint32_t sr = tc1->TC_SR;
|
||||
printf("TC1=%lu; SR=0x%08lx\r\n", tc1->TC_RA, sr);
|
||||
}
|
||||
|
||||
void freq_ctr_init(void)
|
||||
{
|
||||
TcChannel *tc0 = &TC0->TC_CHANNEL[0];
|
||||
|
||||
PIO_Configure(pins_tc, ARRAY_SIZE(pins_tc));
|
||||
|
||||
PMC_EnablePeripheral(ID_TC0);
|
||||
PMC_EnablePeripheral(ID_TC1);
|
||||
|
||||
/* route TCLK1 to XC1 */
|
||||
TC0->TC_BMR &= ~TC_BMR_TC1XC1S_Msk;
|
||||
TC0->TC_BMR |= TC_BMR_TC1XC1S_TCLK1;
|
||||
|
||||
/* TC0 in wveform mode: Run from SCLK. Raise TIOA on RA; lower TIOA on RC + trigger */
|
||||
tc0->TC_CMR = TC_CMR_TCCLKS_TIMER_CLOCK5 | TC_CMR_BURST_NONE |
|
||||
TC_CMR_EEVTEDG_NONE | TC_CMR_WAVSEL_UP_RC | TC_CMR_WAVE |
|
||||
TC_CMR_ACPA_SET | TC_CMR_ACPC_CLEAR;
|
||||
tc0->TC_RA = 16384; /* set high at 16384 */
|
||||
tc0->TC_RC = 32786; /* set low at 32786 */
|
||||
|
||||
/* TC1 in capture mode: Run from XC1. Trigger on TIOA rising. Load RA on rising */
|
||||
tc1->TC_CMR = TC_CMR_TCCLKS_XC1 | TC_CMR_BURST_NONE |
|
||||
TC_CMR_ETRGEDG_RISING | TC_CMR_ABETRG | TC_CMR_LDRA_RISING;
|
||||
/* Interrupt us if the external trigger happens */
|
||||
tc1->TC_IER = TC_IER_ETRGS;
|
||||
NVIC_EnableIRQ(TC1_IRQn);
|
||||
|
||||
TC0->TC_BCR = TC_BCR_SYNC;
|
||||
|
||||
tc0->TC_CCR = TC_CCR_CLKEN|TC_CCR_SWTRG;
|
||||
tc1->TC_CCR = TC_CCR_CLKEN|TC_CCR_SWTRG;
|
||||
}
|
|
@ -0,0 +1,54 @@
|
|||
|
||||
#include "board.h"
|
||||
#include "utils.h"
|
||||
#include "osmocom/core/timer.h"
|
||||
|
||||
extern void freq_ctr_init(void);
|
||||
|
||||
/* returns '1' in case we should break any endless loop */
|
||||
static void check_exec_dbg_cmd(void)
|
||||
{
|
||||
int ch;
|
||||
|
||||
if (!UART_IsRxReady())
|
||||
return;
|
||||
|
||||
ch = UART_GetChar();
|
||||
|
||||
board_exec_dbg_cmd(ch);
|
||||
}
|
||||
|
||||
|
||||
extern int main(void)
|
||||
{
|
||||
led_init();
|
||||
led_blink(LED_RED, BLINK_ALWAYS_ON);
|
||||
led_blink(LED_GREEN, BLINK_ALWAYS_ON);
|
||||
|
||||
/* Enable watchdog for 2000 ms, with no window */
|
||||
WDT_Enable(WDT, WDT_MR_WDRSTEN | WDT_MR_WDDBGHLT | WDT_MR_WDIDLEHLT |
|
||||
(WDT_GetPeriod(2000) << 16) | WDT_GetPeriod(2000));
|
||||
|
||||
PIO_InitializeInterrupts(0);
|
||||
|
||||
|
||||
printf("\n\r\n\r"
|
||||
"=============================================================================\n\r"
|
||||
"Freq Ctr firmware " GIT_VERSION " (C) 2019 by Harald Welte\n\r"
|
||||
"=============================================================================\n\r");
|
||||
|
||||
board_main_top();
|
||||
|
||||
TRACE_INFO("starting frequency counter...\n\r");
|
||||
freq_ctr_init();
|
||||
|
||||
TRACE_INFO("entering main loop...\n\r");
|
||||
while (1) {
|
||||
WDT_Restart(WDT);
|
||||
|
||||
check_exec_dbg_cmd();
|
||||
osmo_timers_prepare();
|
||||
osmo_timers_update();
|
||||
}
|
||||
|
||||
}
|
|
@ -0,0 +1,10 @@
|
|||
sysmocom - s.f.m.c. GmbH
|
||||
SIMtrace 2 compatible device
|
||||
SIMtrace Sniffer
|
||||
SIMtrace CCID
|
||||
SIMtrace Phone
|
||||
SIMtrace MITM
|
||||
CardEmulator Modem 1
|
||||
CardEmulator Modem 2
|
||||
CardEmulator Modem 3
|
||||
CardEmulator Modem 4
|
Loading…
Reference in New Issue