Commit Graph

46 Commits

Author SHA1 Message Date
Kevin Redon 2714c8d357 Merge branch 'v1.4'
Change-Id: Ie406e2d62adbd2e9914b04b9d874d2bd520026a9
2019-10-01 14:57:42 +02:00
Kevin Redon 83d28736a3 Merge branch 'v1.3'
Change-Id: I8ecde4dd1b6ff749e762bb2c42f99df04723c753
2019-10-01 14:44:15 +02:00
Kevin Redon 02405c014b Merge branch 'v1.2_production'
Change-Id: Ib4cba75e8e3cb795b38db588f6ad452e1ff26faa
2019-10-01 14:34:07 +02:00
Kevin Redon dc4cb0a9ac Merge branch 'v1.1_production'
Change-Id: Ie064c379c9625b3cf6910912fd859e8e4dd0326e
2019-10-01 14:28:01 +02:00
Kevin Redon 8c202c012b Merge branch 'v1.0_production'
Change-Id: I481a6b1802993ceb6d02e7edcbd3b6d853f1e487
2019-10-01 14:21:04 +02:00
Harald Welte e24db8d2b4 Schematic: Make sure PA0 to PA2 are high on power-up
any other level is interfering with SAM-BA operation.  This fixes
the PA0=GND bug in the previous v1.3 version.
2014-06-20 09:44:09 +02:00
Kevin Redon 976b0a0a9f BOM corrected (sorted by value) and reformated 2013-10-28 11:00:33 +01:00
Kevin Redon ab6f2d1a19 MCU pin 48 used to identify v1.3 by putting it to ground (with internal pull-up) 2013-10-27 17:11:29 +01:00
Kevin Redon f03312679e MBR0530 pin numbers corrected 2013-10-27 12:17:14 +01:00
Kevin Redon ee65e36d5c v1.3 modifications: replaced IC switch with FPF2109, added schottky and pull-down resistors 2013-10-27 11:39:42 +01:00
Kevin Redon 6dcf692dfa RST_PHONE pulldown added on PCB 2012-05-18 19:30:06 +02:00
Harald Welte 2590ed2f5b Add R23 (pull-up for !SIM_RST signal)
While the SAM7 has an internal pull-up, this is of no use if the bus
switch input is left open and collects noise resulting in bogus nRST
interrupts.
2012-05-17 16:15:10 +02:00
Kevin Redon 1c82a64101 v1.2p fabrication exported 2012-05-16 19:52:14 +02:00
Kevin Redon f0bf11b541 C14 change to 4.7uF 0805, silkscreen improved, more space for JTAG 2012-05-16 13:09:38 +02:00
Kevin Redon e3e4d3a783 VPP connected through bus switch 2011-11-05 18:47:04 +01:00
Kevin Redon 2188a0bccb footprint refreched, cap near LDO 2011-11-03 20:38:04 +01:00
Kevin Redon e27231b676 ftdi 3.3v cut in schema 2011-11-01 10:20:53 +01:00
Kevin Redon 0ce897d341 ftdi vcc disconnected 2011-08-13 13:52:27 +02:00
Kevin Redon ba3363e1c0 D2 and D3 now also use STPS340U instead of 1N5819 2011-07-02 19:59:11 +02:00
Kevin Redon 9c8bb8d6c5 LED now uses 0805 footprint instead of 0603 2011-07-02 18:35:12 +02:00
Kevin Redon 3a4ea6bf43 new footprints select for production in netlist (LED is 0805, schottky is SMB_STPS340U, flash is SO008_wide 2011-07-02 12:51:14 +02:00
Kevin Redon 6c9a1f4f50 new USB and jack 2.5 footprint used in the schema. netlist and component list generated 2011-07-01 13:06:14 +02:00
Kevin Redon c2d8d93407 netlist now include the SAM slot 2011-07-01 11:31:58 +02:00
Kevin Redon ee30134bbc ID1 slot (named SAM, even if not entirely correct) added in schema (now v1.1) 2011-07-01 11:00:46 +02:00
Kevin Redon b35578b117 BOM updated 2011-06-23 13:22:37 +02:00
Kevin Redon 5359f93f07 v1.0 released. board version added, output (schema,gerber) rendered 2011-06-21 15:48:25 +02:00
Kevin Redon 35c53726c9 output rendered 2011-06-21 02:44:26 +02:00
Kevin Redon bcd3695c1a LDO, and power switch added. not verified yet 2011-06-20 22:50:22 +02:00
Kevin Redon c2454435ff better ADC, LDO changed 2011-06-20 20:38:09 +02:00
Kevin Redon 13b6eff33a bus switch CB3q3244 used instead of QS3244 2011-06-20 17:26:04 +02:00
Kevin Redon 337ebf2a3f VCC_PHONE connected to GPIO 2011-06-19 15:10:41 +02:00
Kevin Redon 98ca812b0a SIM_SW connected to GND, components moved 2011-06-19 14:17:52 +02:00
Kevin Redon 3a2c9c35e5 better routing 2011-06-15 19:22:24 +02:00
Kevin Redon df7c1e8562 second gnd added for TPS73633 2011-06-15 17:11:43 +02:00
Kevin Redon 9f07144a2d UDP_PUP now connected to PA16 (pin 19) on schema 2011-06-15 13:58:50 +02:00
Kevin Redon b8ab2b69ea BC847 footprint corrected 2011-06-15 12:47:25 +02:00
Kevin Redon 3914ee6b2b debug port changed 2011-05-22 15:54:51 +02:00
Kevin Redon d3484d64d9 kevin local new versin enforced 2011-05-15 19:36:52 +02:00
Kevin Redon 4a17d44940 update kicad project to v0.9+ 2011-05-13 12:08:27 +02:00
Kevin Redon 078d4f8e44 update kicad project to v0.9 2011-05-13 12:07:45 +02:00
Kevin Redon dcd03f9dc0 update kicad project to v0.8 2011-05-13 12:07:10 +02:00
Kevin Redon 344fcc5744 update kicad project to v0.7+ 2011-05-13 12:06:38 +02:00
Kevin Redon a36cf0b5c2 update kicad project to v0.7 2011-05-13 12:05:58 +02:00
Kevin Redon 79bdd6d51c Update kicad project to v0.6 2011-05-13 12:05:03 +02:00
Kevin Redon 73fe0cb01a Update kicad project to SIMtrace v0.5 2011-05-13 12:02:12 +02:00
Kevin Redon 0c591b5b3a rename from SIMtrace to SIMtrace 2011-05-13 11:59:25 +02:00