sim-card
/
qemu
Archived
10
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-03-30. You can view files and clone it, but cannot push or open issues or pull requests.
qemu/hw
History
aliguori 274fb0e1ed check SCSI read/write requests against max LBA (Rik van Riel) 
The bdrv layer uses a signed offset. Furthermore, block-raw-posix
only seeks when that offset is positive. Passing a negative offset
to block-raw-posix can result in data being written at the current
seek cursor's position.

It may be possible to exploit this to seek to the end of the disk
and extend the virtual disk by writing data to a negative sector
offset.  After a reboot, this could lead to the guest having a
larger disk than it had before.

Close the hole by sanity checking the lba against the size of the
disk.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6475 c046a42c-6fe2-441c-8c8c-71466251a162
 		2009-01-29 19:59:04 +00:00
..
ac97.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
acpi.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
adb.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
adlib.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
ads7846.c Remove duplicate device index calculations. 2008-07-01 21:31:54 +00:00
alpha_palcode.c Convert references to logfile/loglevel to use qemu_log*() macros 2009-01-15 22:34:14 +00:00
an5206.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
apb_pci.c Add Simba device ID 2009-01-27 19:15:31 +00:00
apic.c Add -rtc-td-hack option to fix time drift with RTC on Windows (Gleb Natapov) 2009-01-15 20:11:34 +00:00
arm-misc.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
arm_boot.c uImage: rename load_uboot() to load_uimage() (Hollis Blanchard) 2008-11-20 22:14:40 +00:00
arm_gic.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
arm_pic.c Break up vl.h. 2007-11-17 17:14:51 +00:00
arm_sysctl.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
arm_timer.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
armv7m.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
armv7m_nvic.c Fix warnings that would be caused by ld flag --warn-common 2008-09-17 19:04:14 +00:00
audiodev.h ISA version of CS4231A 2008-06-13 10:48:22 +00:00
axis_dev88.c ETRAX: Remove display-state argument from board init. 2009-01-26 21:47:27 +00:00
baum.c baum: remove 2 warnings 2008-12-11 22:42:58 +00:00
baum.h Braille device support 2008-04-08 06:01:02 +00:00
blizzard.c Fix a warning in hw/blizzard.c 2009-01-16 20:07:19 +00:00
blizzard_template.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
boards.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
bt-hci-csr.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt-hci.c Add qemu_strndup: qemu_strdup with length limit. 2008-11-09 00:28:40 +00:00
bt-hid.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt-l2cap.c Add L2CAP logic and a virtual SDP server for use in emulated devices. 2008-09-29 00:14:22 +00:00
bt-sdp.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt.h Use VHCI to allow the host os to participate in a qemu bluetooth "vlan". 2008-09-29 00:31:41 +00:00
cbus.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
cdrom.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
cirrus_vga.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
cirrus_vga_rop.h CVE-2007-1320 - Cirrus LGD-54XX "bitblt" heap overflow 2008-05-05 21:26:31 +00:00
cirrus_vga_rop2.h find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in the regex. 2007-09-17 08:09:54 +00:00
cs4231.c Remove address masking 2008-12-02 17:47:02 +00:00
cs4231a.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
cuda.c cuda: fix crash on Windows 2009-01-18 12:16:26 +00:00
devices.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
dma.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
ds1225y.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
dummy_m68k.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
e1000.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
e1000_hw.h Fix few spelling issues in comments 2008-04-11 04:55:07 +00:00
ecc.c Break up vl.h. 2007-11-17 17:14:51 +00:00
eccmemctl.c Implement hw/eccmemctl.c version differences (Robert Reif) 2008-12-23 15:08:13 +00:00
eepro100.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
eeprom93xx.c Break up vl.h. 2007-11-17 17:14:51 +00:00
eeprom93xx.h Break up vl.h. 2007-11-17 17:14:51 +00:00
es1370.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
escc.c escc: allow one IRQ per serial channel 2009-01-14 14:47:56 +00:00
escc.h escc: allow one IRQ per serial channel 2009-01-14 14:47:56 +00:00
esp.c Remove address masking 2008-12-02 17:47:02 +00:00
etraxfs.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
etraxfs.h ETRAX: Let the ethernet PHY report the current link-state. 2009-01-09 00:04:35 +00:00
etraxfs_dma.c ETRAX: Process out channels immediately when the channel is started. 2009-01-07 13:46:31 +00:00
etraxfs_dma.h ETRAX-FS: Make etraxfs_dmac_run local. 2008-11-04 20:29:29 +00:00
etraxfs_eth.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
etraxfs_pic.c ETRAX: Correctly update the interrupt vector when interrupts get masked. 2009-01-07 13:30:41 +00:00
etraxfs_ser.c ETRAX-FS: No need to decode the address anymore. 2008-12-06 23:19:03 +00:00
etraxfs_timer.c ETRAX: Support timer count reads and correct frequencies. 2009-01-07 13:24:40 +00:00
fdc.c Floppy: Properly handle Sense Interrupt Status after FDC Reset 2009-01-24 12:09:52 +00:00
fdc.h Wire up TC signal from Aux1 to FDC 2008-03-21 18:05:23 +00:00
firmware_abi.h Fix some compiler signed/unsigned char warnings 2008-06-23 17:52:43 +00:00
flash.h Fill in WLAN and BT platform data in CAL area as expected by Maemo. 2008-07-29 14:19:16 +00:00
fmopl.c Add static qualifier to local functions 2009-01-25 10:56:51 +00:00
fmopl.h audio merge (malc) 2004-11-07 18:04:02 +00:00
fw_cfg.c Allow to register a callback with fw_cfg_add_callback() 2008-12-11 17:30:50 +00:00
fw_cfg.h Add common keys to firmware configuration 2008-09-18 18:33:18 +00:00
g364fb.c G364 video adapter enhancement 2009-01-16 21:13:58 +00:00
grackle_pci.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
gt64xxx.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
gumstix.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
gus.c Add missing static qualifier 2008-12-11 00:14:28 +00:00
gusemu.h Fix some signedness issues caught by gcc 4.3 2008-06-08 01:42:47 +00:00
gusemu_hal.c Gravis Ultrasound GF1 sound card emulation (malc). 2008-01-14 22:09:11 +00:00
gusemu_mixer.c Fix some signedness issues caught by gcc 4.3 2008-06-08 01:42:47 +00:00
gustate.h Gravis Ultrasound GF1 sound card emulation (malc). 2008-01-14 22:09:11 +00:00
heathrow_pic.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
hpet.c hpet config mask fix 2009-01-16 21:38:58 +00:00
hpet_emul.h hpet config mask fix 2009-01-16 21:38:58 +00:00
hw.h Reintroduce migrate-to-exec: support (Charles Duffy) 2008-11-11 16:46:33 +00:00
i2c.c Fix load width for slave address in i2c_bus_load (Chris Lalancette). 2008-07-29 13:57:48 +00:00
i2c.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
i8254.c Check if the i8254 timer is active before deactivating it (Alexander Graf) 2009-01-26 20:32:18 +00:00
i8259.c Special Mask Mode for i8259 PIC (Sebastian Reichelt). 2008-07-19 09:18:48 +00:00
ide.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
integratorcp.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
iommu.c add Arbiter Enable Register support to sparc iommu (Robert Reif) 2008-12-21 10:46:23 +00:00
irq.c Luminary board input support. 2007-11-18 14:36:08 +00:00
irq.h Rework OMAP1 interrupt handling to allow multiple interrupt banks, by Lauro Ramos Venancio. 2007-12-05 03:23:39 +00:00
isa.h Make DMA bottom-half driven (v2) 2008-10-31 17:25:56 +00:00
isa_mmio.c Break up vl.h. 2007-11-17 17:14:51 +00:00
jazz_led.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
lm832x.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
lsi53c895a.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
m48t59.c Register reset handlers 2008-12-28 18:27:10 +00:00
mac_dbdma.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
mac_nvram.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
macio.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
mainstone.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
mainstone.h Mainstone mmc support, by Armin Kuster. 2007-12-09 02:38:34 +00:00
max111x.c Remove duplicate device index calculations. 2008-07-01 21:31:54 +00:00
max7310.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
mc146818rtc.c Support epoch of 1980 in RTC emulation for MIPS Magnum 2009-01-24 18:06:21 +00:00
mcf.h Break up vl.h. 2007-11-17 17:14:51 +00:00
mcf5206.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
mcf5208.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
mcf_fec.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
mcf_intc.c Break up vl.h. 2007-11-17 17:14:51 +00:00
mcf_uart.c Add input buffer to mux chr (patch by Tristan Gingold). 2007-11-25 00:55:06 +00:00
mips.h G364 video adapter enhancement 2009-01-16 21:13:58 +00:00
mips_int.c Break up vl.h. 2007-11-17 17:14:51 +00:00
mips_jazz.c Support epoch of 1980 in RTC emulation for MIPS Magnum 2009-01-24 18:06:21 +00:00
mips_malta.c Support epoch of 1980 in RTC emulation for MIPS Magnum 2009-01-24 18:06:21 +00:00
mips_mipssim.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
mips_r4k.c Support epoch of 1980 in RTC emulation for MIPS Magnum 2009-01-24 18:06:21 +00:00
mips_timer.c Convert references to logfile/loglevel to use qemu_log*() macros 2009-01-15 22:34:14 +00:00
mipsnet.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
mpcore.c Attached patch contains warning fixes. 2008-12-05 17:56:40 +00:00
mst_fpga.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
musicpal.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
nand.c Fix NAND flash save/restore. 2009-01-20 04:15:47 +00:00
ne2000.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
nseries.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
nvram.h Suppress gcc 4.x -Wpointer-sign (included in -Wall) warnings 2008-09-20 08:07:15 +00:00
omap.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
omap1.c add an init function parameter to qemu_chr_open() 2009-01-18 14:08:04 +00:00
omap2.c add an init function parameter to qemu_chr_open() 2009-01-18 14:08:04 +00:00
omap_clk.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_dma.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_dss.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
omap_i2c.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_lcd_template.h find -type f | xargs sed -i 's/[\t ]$//g' # on most files 2007-09-16 21:08:06 +00:00
omap_lcdc.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
omap_mmc.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_sx1.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
onenand.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
openpic.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
palm.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
parallel.c Parallel port reset 2008-12-07 23:26:09 +00:00
pc.c Support epoch of 1980 in RTC emulation for MIPS Magnum 2009-01-24 18:06:21 +00:00
pc.h Support epoch of 1980 in RTC emulation for MIPS Magnum 2009-01-24 18:06:21 +00:00
pci.c Add Simba device ID 2009-01-27 19:15:31 +00:00
pci.h Add Simba device ID 2009-01-27 19:15:31 +00:00
pci_host.h Improve PCI debug support 2009-01-08 18:52:52 +00:00
pckbd.c MIPS Magnum: fix memory-mapped i8042 2008-12-10 15:02:07 +00:00
pcmcia.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pcnet.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
pcspk.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
pflash_cfi01.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
pflash_cfi02.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
piix_pci.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
pixel_ops.h Use pixel_ops.h in PXA LCD screen drawing. 2007-06-13 22:36:30 +00:00
pl011.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl022.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl031.c Fix RTC initial date computation 2008-12-04 21:34:52 +00:00
pl050.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl061.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl080.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl110.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pl110_template.h Implement PL110 byte order config bit (original patch by Richard Purdie). 2007-10-04 23:45:31 +00:00
pl181.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pl190.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
ppc.c Convert references to logfile/loglevel to use qemu_log*() macros 2009-01-15 22:34:14 +00:00
ppc.h target-ppc: move OpenBIOS machines type to ppc.h from hw/ppc_oldworld.c 2009-01-08 16:01:23 +00:00
ppc4xx.h target-ppc: create a helper function to allow more flexible RAM allocation for PPC 4xx 2008-12-15 23:15:56 +00:00
ppc4xx_devs.c Convert references to logfile/loglevel to use qemu_log*() macros 2009-01-15 22:34:14 +00:00
ppc4xx_pci.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
ppc405.h target-ppc: move PPC4xx SDRAM controller emulation from ppc405_uc.c to ppc4xx_devs.c 2008-12-15 22:59:34 +00:00
ppc405_boards.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ppc405_uc.c target-ppc: rename ppc405_sdram_init() to ppc4xx_sdram_init() 2008-12-15 22:59:45 +00:00
ppc440.c target-ppc: PowerPC 440EP SoC emulation 2008-12-16 10:44:06 +00:00
ppc440.h target-ppc: PowerPC 440EP SoC emulation 2008-12-16 10:44:06 +00:00
ppc440_bamboo.c Fix warnings 2009-01-16 19:41:04 +00:00
ppc_chrp.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ppc_mac.h Use ESCC for PowerMac serial 2009-01-12 17:40:23 +00:00
ppc_oldworld.c target-ppc: always load kernel to KERNEL_LOAD_ADDR 2009-01-26 10:22:15 +00:00
ppc_prep.c Support epoch of 1980 in RTC emulation for MIPS Magnum 2009-01-24 18:06:21 +00:00
prep_pci.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
primecell.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ps2.c Add reset irq state for ps2 reboot callback (Dor Laor) 2009-01-26 15:57:52 +00:00
ps2.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
ptimer.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pxa.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pxa2xx.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pxa2xx_dma.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_gpio.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_keypad.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_lcd.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
pxa2xx_mmci.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_pcmcia.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_pic.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_template.h Fix RGBT 5:5:5 drawing on pxa2xx lcd (Lars Munch) 2008-11-03 01:08:14 +00:00
pxa2xx_timer.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
r2d.c sh4: r2d. Endian conversion for peripheral register initialization. 2009-01-24 18:18:20 +00:00
rc4030.c target-mips: DMA support for RC4030 chipset 2009-01-01 13:03:36 +00:00
realview.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
realview_gic.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
rtl8139.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
sb16.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sbi.c Remove address masking 2008-12-02 17:47:02 +00:00
scsi-disk.c check SCSI read/write requests against max LBA (Rik van Riel) 2009-01-29 19:59:04 +00:00
scsi-disk.h Real SCSI device passthrough (v4), by Laurent Vivier. 2007-12-24 16:10:43 +00:00
scsi-generic.c scsi-generic: correct error management 2008-10-17 08:08:56 +00:00
scsi.h ESP: Add it_shift parameter (Hervé Poussineau) 2008-04-09 16:32:48 +00:00
sd.c Enable SD card on creation. 2008-06-02 00:55:08 +00:00
sd.h Add basic OMAP2 chip support. 2008-04-14 21:05:22 +00:00
serial.c serial: open a null device if the CharDriverState argument is null 2009-01-18 14:28:10 +00:00
sh.h SH4: Eliminate P4 to A7 mangling (Takashi YOSHII). 2008-12-07 19:39:58 +00:00
sh7750.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sh7750_regnames.c Break up vl.h. 2007-11-17 17:14:51 +00:00
sh7750_regnames.h SHIX board emulation (Samuel Tardieu) 2006-04-27 21:32:09 +00:00
sh7750_regs.h sh775x interrupt controller by Magnus Damm. 2007-10-04 21:53:55 +00:00
sh_intc.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sh_intc.h Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sh_pci.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
sh_serial.c SH4: SCI improvement 2008-12-07 22:46:49 +00:00
sh_timer.c SH4: Eliminate P4 to A7 mangling (Takashi YOSHII). 2008-12-07 19:39:58 +00:00
sharpsl.h Provide basic emulation for Sharp SL-6000 PDA (Tosa), Dmitry Baryshkov. 2008-06-02 01:33:11 +00:00
shix.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
slavio_intctl.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
slavio_misc.c hw/slavio_misc.c remove address from debug trace (Robert Reif) 2008-12-21 16:00:20 +00:00
slavio_timer.c Remove address masking 2008-12-02 17:47:02 +00:00
sm501.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
sm501_template.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
smbus.c Add statics and missing #includes for prototypes. 2007-11-18 01:44:38 +00:00
smbus.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
smbus_eeprom.c Fix smbus_eeprom.c compile with DEBUG (spotted by Duilio Protti). 2008-06-02 01:48:27 +00:00
smc91c111.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
soc_dma.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
soc_dma.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
sparc32_dma.c Revert part of r5853 2008-12-15 20:24:25 +00:00
sparc32_dma.h Break up vl.h. 2007-11-17 17:14:51 +00:00
spitz.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ssd0303.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ssd0323.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
ssi-sd.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
stellaris.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
stellaris_enet.c Check NIC model in some NIC init functions (Mark McLoughlin) 2009-01-13 19:39:36 +00:00
stellaris_input.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sun4c_intctl.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sun4m.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
sun4m.h graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
sun4u.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
tc6393xb.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
tc6393xb_template.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tc58128.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
tcx.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
tmp105.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tosa.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
tsc210x.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tsc2005.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tusb6010.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
twl92230.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
unin_pci.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
usb-bt.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
usb-hid.c fix usb-hid SET_IDLE behaviour (Stefano Stabellini) 2009-01-07 16:41:47 +00:00
usb-hub.c Break up vl.h. 2007-11-17 17:14:51 +00:00
usb-msd.c Add image format option for USB mass-storage devices 2008-08-21 22:24:32 +00:00
usb-musb.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
usb-net.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
usb-ohci.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
usb-serial.c add an init function parameter to qemu_chr_open() 2009-01-18 14:08:04 +00:00
usb-uhci.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
usb-wacom.c Break up vl.h. 2007-11-17 17:14:51 +00:00
usb.c usb: generic packet handler cleanup and documentation (Max Krasnyansky) 2008-08-21 19:29:38 +00:00
usb.h Emulate a USB bluetooth dongle (or HCI Transport layer). 2008-09-29 00:40:44 +00:00
versatile_pci.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
versatilepb.c graphical_console_init change (Stefano Stabellini) 2009-01-16 19:04:14 +00:00
vga.c Move definition of rgb_to_pixel_dup_table (Nathan Froyd) 2009-01-26 17:07:42 +00:00
vga_int.h fix screendump (Stefano Stabellini) 2009-01-16 19:07:10 +00:00
vga_template.h find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in the regex. 2007-09-17 08:09:54 +00:00
virtio-balloon.c Use the default subsystem vendor ID for virtio devices (Mark McLoughlin) 2009-01-26 15:22:57 +00:00
virtio-balloon.h Add virtio-balloon support 2008-12-04 20:33:06 +00:00
virtio-blk.c Use the default subsystem vendor ID for virtio devices (Mark McLoughlin) 2009-01-26 15:22:57 +00:00
virtio-blk.h pci: virtio: use pci id defines (Gerd Hoffman) 2008-12-11 21:20:03 +00:00
virtio-console.c Use the default subsystem vendor ID for virtio devices (Mark McLoughlin) 2009-01-26 15:22:57 +00:00
virtio-console.h Add missing files from last commit. 2009-01-15 20:05:50 +00:00
virtio-net.c Use the default subsystem vendor ID for virtio devices (Mark McLoughlin) 2009-01-26 15:22:57 +00:00
virtio-net.h Make virtio_net_init() return void (Mark McLoughlin) 2009-01-13 21:09:18 +00:00
virtio.c Don't notify virtio devices before S_DRIVER_OK (Mark McLoughlin) 2009-01-29 17:02:13 +00:00
virtio.h Make struct iovec universally available 2008-12-05 20:05:26 +00:00
vmmouse.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
vmport.c Silence vmport unless DEBUG is enabled. 2008-08-19 19:13:06 +00:00
vmware_vga.c Define PCI vendor and device IDs in pci.h (Stuart Brady) 2009-01-26 15:37:35 +00:00
wm8750.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
zaurus.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00